Could not find 'options' or 'Advanced tab' under Tools

Similar Questions

• Could not find 'options' under the heading 'tools '.

  Have read many obsolete and contradictory articles about solutions. Help, please.

  On Mac, you can watch Firefox > Preferences (Options is for Windows).

• Could not find 'to the disk error checking tool"_

  Help and Support says that I should use 'disk error checking tool' to fix corrupt file (0 x 81000008) system, but does not say how to find

  Here is an article on where to find and how to use http://www.vista4beginners.com/Check-Disk.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Why Ai CC 2014, when I use a pathfinder on two objects tool, their anchor points break a bit from where they were? I search in all the nod to under VIEW options & could not find the culprit. Help, please!

  Why Ai CC 2014, when I use a pathfinder on two objects tool, their anchor points break a bit from where they were? I search in all the nod to under VIEW options & could not find the culprit. Help, please!

  It looks like "snap to grid of pixels" just once more.

  Uncheck the box "align new objects to the pixel grid" in the menu of the transformation Panel.

  Select the objects and uncheck "snap to grid of pixels" in the transformation Panel.

• System could not find the environment option that was entered.

  The Trend Micro Client caused a bit of stir in my computer.

  He gave me the UiSeAgnt.exe error and I couldn't open any .exe files. I uninstalled Trend Micro and that pop up more rises. But the "System could not find the environment option/variable is entered" is yet to come when I try to run the .exe. This means that same cmd cannot be opened. I can not connect to the Internet independently wireless or wired. Audio system is not even the sense system speakers or external audio devices.

  I tried the system restore, did not work. I tried SFC/scannow, did not work. Now my current idea is to back up my files and blow the computer on with a clean restore. What should I do? I use a Vaio E series 14 p, btw.

  If it really comes down to it, how much memory should I backup everything?

  Hi Vey,

  Thanks for posting your query in the Microsoft community.

  Your system is connected to a domain network?

  This problem occurs in situations where Shutdown.exe cannot access the UserDomain environment variable. The task of the judgment which is on demand by using the at command runs under the system account. When the task is run under the System account, the UserDomain environment variable are not accessible because it does not exist. But the problem occurs mainly on the areas of server.

  I would suggest trying the following steps and check if these help to resolve the issue.

  1. start your system in safe mode.

  2. press on the Windows key + R.

  3. type sysdm.cpl , and then click OK.

  4. click on the "Advanced" tab

  5. in "Startup and recovery", click "Environment Variables".

  6. under "System Variables", click 'new '.

  7. for "Variable name", type in windir%

  8. for 'Value of the Variable', type in C:\Windows

  9. click OK on the all the dialog boxes that pop up.

  10. restart your system in normal mode.

  If, however, your system is connected to the normal mode, please see the following support article.

  Computer does not and you receive an error "System cannot find the environment Option that was entered" when you schedule a task of closing using the AT command

  Hope this information is useful. Let us know if you need more help, we will be happy to help you.

• Could not find the time stamp option in the historic window

  Could not find the option "date of visit" in the historic window as described in "ehow" for Firefox

  This is the most recent column visit.

  Have you looked in the menu ' views > show columns "in the library?

• The system could not find the environment option that was entered.

  I have Vista Home Premium. I must have met a significant corruption or a virus. Here's what the system won't let me do.

  System restore
  Launch any program exe
  run cmd as administrator
  launch msconfig
  Basically, everything I download don't throw (including several ladies virus recommended this forum and others)
  If it's a virus, he got by AVG free edition
  Safe mode does not enable all the options I get always "the system could not find the environment option that was entered."
  It of almost as if someone really took time to reflect on how to thwart an attack and then implemented in the opposite direction.

  Is blowing the entire disk and back at my only option?

  Help!; 0

  Zitouni,

  Thanks for your reply, good point on the File Checker, I didn't know that. Unforuneatly I have not see your reply until I decided it was time to re - install the system. One thing to note, I couldn't do a 'run as administrator' anyway possible. This system was really corrupt which leads me to believe that he may have been a NTFS/Fat 32 Co-mingling question. Just a guess, but I really don't see how it could have happened otherwise.

  Another thing to note, if you have a Dell Inspiron 1720 with a 250Gig HD-make sure that you format the partition, you then load the SATA drivers! Also, make sure that the restore partition does not primary. Make sure that you format (assuming that you have backed up your data before!). Otherwise, it hangs on Setup to complete the installation. Who took me ahwhile to understand.

  Everything is cool now (reinstalled Vista), just thank ful there is a site like this to run things by! ;)

  Concerning

  Jeff

• "I received a message to activate the firewall of windows as important, but when I try to turn it on it gives me" the systerm could not find the environment option.

  #corrected "tehe systerm could not find the environment option" in the title

  "the system could not find the environment option"

  Hi nickzino,

  (1) what is the complete error message you receive?

  (2) since when are you facing this problem?

  (3) remember you to make changes to the computer before this problem?

  Method 1: Let flow the fixit available in the link below and then check

  Security Warning: the Windows Firewall is disabled

  http://support.Microsoft.com/kb/2288085

  Method 2: If a Protection of resources Windows (WRP) file is missing or is damaged, Windows may not behave as expected. Auditor of file system (CFS) scan to fix all of the corrupted system files. To do this, follow the steps mentioned in the link below:

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  Thanks and greetings

  Ajay K

  Microsoft Answers Support Engineer
  ***************************************************************************

• __why my computor still says the system could not find the environment option that was entered when I trey to change settings or load a new program

  the system could not find the environment option that was entered

  Hi Yasish.P,

  Thank you for using the Microsoft Windows Vista Forums.

  I will need some additional information to help you best.

  O when you get this error message?

  Meanwhile, analysis of auditor of file system (CFS) that might help you resolve the issue.

  To determine if the problem you are experiencing is caused by one or more system files that are used by Windows Vista, run the System File Checker tool. The System File Checker tool analyzes the system files and replaces incorrect versions of system files by using the correct versions.

  To determine if the problem you are experiencing is caused by one or more system files that are used by Windows Vista, run the System File Checker tool. The System File Checker tool analyzes the system files and replaces incorrect versions of system files by using the correct versions.

  To run the System File Checker tool, follow these steps:

  1. Click Start and type cmd in the box start the search.

  2. right click on cmd in the list programs and then click Run as administrator.

  If you are prompted for an administrator password or a confirmation, type your password or click on continue

  3. at the command prompt, the following line, and then press ENTER:

  sfc/scannow

  When the analysis is complete, test to see if the problem you are experiencing is resolved. If the problem you are experiencing is not resolved, use the procedure that is described in the section "the System Restore tool.

  Follow the instructions in the link below for more information on scan SFC.

  http://support.Microsoft.com/kb/936212/

  You can see the link below for more information.

  http://social.answers.Microsoft.com/forums/en-us/vistasecurity/thread/aa301b37-e6b9-4f8c-B812-3ba2c58e1442

  Please post back and let us know if it helped to solve your problem.

  Kind regards

  KarthiK TP

• The system could not find the environment that has been entered - option Windows 7

  I don't know what I was doing at the computer before this problem started. However, I first noticed that something was wrong when I tried to open the photo viewer and was faced with the problem of the impossibility to find the module specified for this program. In an attempt to solve this problem, I tried to download and install the Photo Gallery in Windows Live and this is when I first discovered that my system has this problem.

  
  

  I went online to search for solutions to these problems, but none of the solutions worked. Here are the steps that I tried in vain that the system could not find the environment option that was entered.

  
  

  http://social.answers.Microsoft.com/forums/en-us/w7repair/thread/E272E37C-3C80-409F-8CDF-F3F2242B97D4

  I tried open CMD with administrator privileges but am unable to do so. Once more, the next step on the start-up of the Installation DVD of Win 7 to use the Startup Repair tool doesn't have that the system was unable to find the environment option that was entered. I proceeded to try to use the system restore, but is facing the same problem too.

  
  

  http://social.answers.Microsoft.com/forums/en-us/w7repair/thread/E272E37C-3C80-409F-8CDF-F3F2242B97D4

  This is the report on my existing variables according to the steps there. But unfortunately, this thread has shown no solution, that I could undertake, given that I can't open Regedit too.

  
  

  
  

  %ALLUSERSPROFILE%

  APPDATA

  ASL.log

  CLASSPATH

  COMPUTERNAME

  ComSpec

  FP_NO_HOST_CHECK

  HOMEDRIVE

  HOMEPATH

  LOCALAPPDATA

  LOGONSERVER

  NUMBER_OF_PROCESSORS

  OPERATING SYSTEM

  Path

  PATHEXT

  PROCESSOR_ARCHITECTURE

  PROCESSOR_IDENTIFIER

  PROCESSOR_LEVEL

  PROCESSOR_REVISION

  ProgramData

  GUEST

  PSModulePath

  PUBLIC

  QTJAVA

  NOMSESSION

  SystemDrive

  SystemRoot

  TEMP

  TMP

  USERDOMAIN

  USERNAME

  USERPROFILE

  WINDIR

  
  
  Can someone help me please? I think to reformat my computer if this continues (think of how to do it now I can't run the Windows 7 Installation disc either).
  
  
  Thank you very much.
  
  
  Nicholas C

  You can probably fix your problem by using the system restore. Here's how it works:
  1. keep tapping F8 during the first phase of startup.
  2. select Repair from the menu.
  3. Enter the administrator password when you are prompted. It is often empty.
  4. When you are prompted, select System Restore.
  5. set Windows to a point before this problem occurred.

• Impossible to install XP SP3 (could not find the file specified)

  I looked at and followed the steps described in

  Article ID: 950717 - steps to take before you install Windows XP Service Pack 3
   
  I do not have

  • Microsoft Shared Computer Toolkit
  • Pack MUI Remote Desktop Connection (RDP) 6.0 (update 925877 for Windows XP)

  I tried to install SP3 with and without my Antivirus, Antispyware and firewall running programs (several times – 4, 5, or more).  Each time, I get an error staing "could not find the specified file."  Then after being told that SP3 can not be installed and that "Windows XP has been partially updated and may not work properly", I have to restart my system.

  I also followed all the steps in this article (Article ID: 950718 - how to troubleshoot an installation fails in Windows XP Service Pack 3) and still the same thing as above.

   

  I tried to download SP3 directly from the Download Center - same results as before.

   

  I started the BITS service and tried again - same results as above.

   

  I've disabled auto updates and removed to software distribution (download renamed folder as shown) - same results as shown above.

   

  I tried to restore my system to an earlier date - 4 these attempts using different dates and set points during the last wee - ALL have failed.

  I also tried the proposals 1 to 3 in this article (Article ID: 950249-how to remove Windows XP Service Pack 3 from your computer), and none of these steps worked.

  I spent over 8 hours today and yesterday a couple just trying to solve this problem and still don't get anywhere.  I am beyond frustrated at this point.  I know that say Windows can not work properly, and I need my computer to do my job.  Any help would be appreciated.

  You could do a repair installation with a CD of Windows XP with SP3 integrated already.  However, unless this is a new installation that you have installed SP2 on so you could get then SP3 installed on it - you have obviously been broadcast for some time without a lot of fixed security and tastes and your system could very well be stripped because of this.

  Search for malware:

  Download, install, execute, update and perform analyses complete system with the two following applications:

  • MalwareBytes (FREE)
  • SuperAntiSpyware (FREE)

  Remove anything they find.  Reboot when necessary.  (You can uninstall one or both when finished.)

  Search online with eSet Online Scanner.

  The less you have to run all the time, most things you want to run will perform:

  Use Autoruns to understand this all starts when your computer's / when you log in.  Look for whatever it is you do not know using Google (or ask here.)  You can hopefully figure out if there are things from when your computer does (or connect) you don't not need and then configure them (through their own built-in mechanisms is the preferred method) so they do not - start using your resources without reason.

  You can download and use Process Explorer to see exactly what is taking your time processor/CPU and memory.  This can help you to identify applications that you might want to consider alternatives for and get rid of all together.

  Do a house cleaning and the dust of this hard drive:

  You can free up disk space (will also help get rid of the things that you do not use) through the following steps:

  Windows XP should take between 4.5 and 11 GB * with * an Office suite, editing Photo software, alternative Internet browser (s), various Internet plugins and a host of other things installed.

  If you are comfortable with the stability of your system, you can delete the uninstall of patches which has installed Windows XP...
  http://www3.TELUS.NET/dandemar/spack.htm
  (Especially of interest here - #4)
  (Variant: http://www.dougknox.com/xp/utils/xp_hotfix_backup.htm )

  You can run disk - integrated into Windows XP - cleanup to erase everything except your last restore point and yet more 'free '... files cleaning

  How to use disk cleanup
  http://support.Microsoft.com/kb/310312

  You can disable hibernation if it is enabled and you do not...

  When you Hibernate your computer, Windows saves the contents of the system memory in the hiberfil.sys file. As a result, the size of the hiberfil.sys file will always be equal to the amount of physical memory in your system. If you don't use the Hibernate feature and want to reclaim the space used by Windows for the hiberfil.sys file, perform the following steps:

  -Start the Control Panel Power Options applet (go to start, settings, Control Panel, and then click Power Options).
  -Select the Hibernate tab, uncheck "Activate the hibernation", and then click OK. Although you might think otherwise, selecting never under "Hibernate" option on the power management tab does not delete the hiberfil.sys file.
  -Windows remove the "Hibernate" option on the power management tab and delete the hiberfil.sys file.

  You can control the amount of space your system restore can use...

  1. Click Start, right click my computer and then click Properties.
  2. click on the System Restore tab.
  3. highlight one of your readers (or C: If you only) and click on the button "settings".
  4 change the percentage of disk space you want to allow... I suggest moving the slider until you have about 1 GB (1024 MB or close to that...)
  5. click on OK. Then click OK again.

  You can control the amount of space used may or may not temporary Internet files...

  Empty the temporary Internet files and reduce the size, that it stores a size between 64 MB and 128 MB...

  -Open a copy of Microsoft Internet Explorer.
  -Select TOOLS - Internet Options.
  -On the general tab in the section 'Temporary Internet files', follow these steps:
  -Click on 'Delete the Cookies' (click OK)
  -Click on "Settings" and change the "amount of disk space to use: ' something between 64 MB and 128 MB. (There may be many more now.)
  -Click OK.
  -Click on 'Delete files', then select "Delete all offline content" (the box), and then click OK. (If you had a LOT, it can take 2 to 10 minutes or more).
  -Once it's done, click OK, close Internet Explorer, open Internet Explorer.

  You can use an application that scans your system for the log files and temporary files and use it to get rid of those who:

  CCleaner (free!)
  http://www.CCleaner.com/
  (just disk cleanup - do not play with the part of the registry for the moment)

  Other ways to free up space...

  SequoiaView
  http://www.win.Tue.nl/SequoiaView/

  JDiskReport
  http://www.jgoodies.com/freeware/JDiskReport/index.html

  Those who can help you discover visually where all space is used.  Then, you can determine what to do.

  After that - you want to check any physical errors and fix everything for efficient access"

  CHKDSK
  How to scan your disks for errors* will take time and a reboot.

  Defragment
  How to defragment your hard drives* will take time

  Cleaning the components of update on your Windows XP computer

  While probably not 100% necessary-, it is probably a good idea at this time to ensure that you continue to get the updates you need.  This will help you ensure that your system update is ready to do it for you.

  Download and run the MSRT tool manually:
  http://www.Microsoft.com/security/malwareremove/default.mspx
  (Ignore the details and download the tool to download and save to your desktop, run it.)

  Reset.

  Download/install the latest program Windows installation (for your operating system):
  (Windows XP 32-bit: WindowsXP-KB942288-v3 - x 86 .exe )
  (Download and save it to your desktop, run it.)

  Reset.

  and...

  Download the latest version of Windows Update (x 86) agent here:
  http://go.Microsoft.com/fwlink/?LinkId=91237
  ... and save it to the root of your C:\ drive. After you register on the root of the C:\ drive, follow these steps:

  Close all Internet Explorer Windows and other applications.

  AutoScan--> RUN and type:
  %SystemDrive%\windowsupdateagent30-x86.exe /WUFORCE
  --> Click OK.

  (If asked, select 'Run'). --> Click on NEXT--> select 'I agree' and click NEXT--> where he completed the installation, click "Finish"...

  Reset.

  Now reset your Windows with this FixIt components update:
  How to reset the Windows Update components?

  Reset.

  Now that your system is generally free of malicious software (assuming you have an AntiVirus application), you've cleaned the "additional applications" that could be running and picking up your precious memory and the processor, you have authorized out of valuable and makes disk space as there are no problems with the drive itself and your Windows Update components are updates and should work fine - it is only only one other thing you need to do before you install Windows XP SP3:

  Get and install the hardware device last drivers for your system hardware/system manufacturers support and/or download web site.

  Come back and let us know a bit more information on your system - particularly the brand / model of the system, you have - and maybe someone here can guide you to the place s x of law to this end.

  Once the computer has been put by the top meat grinder (do it all, like data. even if you JUST did some of them) - download you ' HE Installer "SP3, save it to your desktop, restart and login as an administrator and run this file, following the signs.

• Backup files Vista - "Windows could not find any backup sets [file path]."

  I have a Vista computer.  The hard drive broke so until I replaced it I backed up all the files on the computer to another computer running Windows 7. I did it in the backup and Restore Center.  I made a backup of files, not a full backup of the system (I've seen the full backup of the system mentioned in other posts, but that was not an option... maybe which is only available on Vista Premium).  In any case, I replaced the hard drive and then try to restore the files, but I get the message "Windows could not find any backup sets [file path]."  Anyone have any ideas?  Thank you.

  Here is an article on the restore procedure:http://www.vista4beginners.com/How-to-restore-files to make sure you do this right.  It's a selective restore of a full or selective backup (not a full restore from a full backup) - but since you did a full backup, it matches your process more closely than would a full restore.

  Here is an article on the advanced use of restoration (during normal restore does not work):http://www.mayankraichura.com/post/2009/08/06/Avdvanced-Restore-via-Windows-Vista-Backup-and-Restore-Center.aspx.

  Restore files from a backup
  http://Windows.Microsoft.com/en-us/Windows-Vista/restore-files-from-a-backup

  Back up and restore: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-and-restore-frequently-asked-questions

  I also found the following (but don't know if it of true or not):

  1. after the start of "backup and Restore Center."

  2. I chose "Advanced Restore"

  3. I was did not an administrator password... maybe because my account is an administrator account.

  4 choose "files from a backup made on a different computer.

  5. in the dialog box indicating "Select the location of the backup to restore", select "hard drive, CD or DVD...". »

  6. under the drop-down list box, select your drive/partition and continue

  7. If all the backups on your drive, it will show a list of them.

  8. in my case, he showed a backup, but in the backup location, it will show "backup location is not available."

  9. I was frustrated, but then I somehow just select this backup (Yes... even if he said that thebackup location is not available " ")

  10. and you press "next".

  11 guess what... no error!

  12. a window appeared asking me if I wanted to do a full restore, or I want to select specific folders or files.

  13. I selected the folders I wanted to restore and bingo... it their restored smoothly.

  14. so that the next time see a mistake, try to continue with him... ;)

  I don't know if this will help, but it does not provide much information about the process (when it works).  I hope you find any error or discrepancy in your procedure and it will clear up and allow you to restore.

  I hope this helps.

  Good luck!
  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Could not find LM238 regulator of tension in Multisim

  I am new to Multisim.  I can't find a LM238 voltage regulator in the library under sources power supply voltage regulators.  In fact, I did a general search and could not find anywhere.  What is usually done in a case like this?  My intuition tells me that I wouldn't need to redraw my circuit just because I can't find a component in Multisim.

  Thanks in advance.

  Hello

  We don't have a model for the LM238, but we have a model for the LM138. According to this data sheet, the LM138, the LM238 and the LM338 are identical with the exception of the beaches of operating temperatures. You can place a component LM138 to the master database and use it for the simulationand implementation.

  Hope that helps.

• could not find a server reports and analysis hyperion running on localhost port 6800. Please check your connection string server and verify that the server is

  Hi all

  We have properly installed and configured Hyperion Reporting and analysis 11.1.2.4 in windows 2012 server however when I try to logint to the workspace, I get an error like "start-up of the specified document does not exist in the repository." "Select a new start under the General Preferences tab document" monitoring of "could not find a server reports and analysis hyperion running on localhost at port 6800. Please check your connection string server and verify that the server is up '.

  
  

  
  

  

  
  

  

  HyS9RaFramework_epmsystem2-syserr:

  GsmNotFound

  com.brio.one.services.globalservicemanager.GSMException: GsmNotFound

  at com.brio.one.services.globalservicemanager.GSMFactory.getGSM (unknown Source)

  to com.brio.one.client.ClientFactory. < init >(Unknown Source)

  to com.brio.one.client.ClientFactory. < init >(Unknown Source)

  to com.brio.one.client.ClientFactory$ ClientFactoryInitializer.connect (unknown Source)

  at com.brio.one.client.ClientFactory.getClientFactoryConnect (unknown Source)

  at com.brio.one.client.ClientFactory.getDefaultGSM (unknown Source)

  at com.brio.one.web.properties.ApplicationProperties.getDefaultGSM (unknown Source)

  at com.brio.one.web.properties.ApplicationProperties.getDefaultGSMContext (unknown Source)

  at com.sqribe.WS.WSBaseServlet.setDefaultGSMContext (unknown Source)

  at com.sqribe.WS.WSBaseServlet.initLogging (unknown Source)

  at com.sqribe.WS.WSBaseServlet.loadConfiguration (unknown Source)

  at com.sqribe.WS.WSBaseServlet.init (unknown Source)

  to weblogic.servlet.internal.StubSecurityHelper$ ServletInitAction.run (StubSecurityHelper.java:283)

  at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)

  at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)

  at weblogic.servlet.internal.StubSecurityHelper.createServlet(StubSecurityHelper.java:64)

  at weblogic.servlet.internal.StubLifecycleHelper.createOneInstance(StubLifecycleHelper.java:58)

  to weblogic.servlet.internal.StubLifecycleHelper. < init > (StubLifecycleHelper.java:48)

  at weblogic.servlet.internal.ServletStubImpl.prepareServlet(ServletStubImpl.java:539)

  at weblogic.servlet.internal.WebAppServletContext.preloadServlet(WebAppServletContext.java:1981)

  at weblogic.servlet.internal.WebAppServletContext.loadServletsOnStartup(WebAppServletContext.java:1955)

  at weblogic.servlet.internal.WebAppServletContext.preloadResources(WebAppServletContext.java:1874)

  at weblogic.servlet.internal.WebAppServletContext.start(WebAppServletContext.java:3155)

  at weblogic.servlet.internal.WebAppModule.startContexts(WebAppModule.java:1518)

  at weblogic.servlet.internal.WebAppModule.start(WebAppModule.java:487)

  to weblogic.application.internal.flow.ModuleStateDriver$ 3.next(ModuleStateDriver.java:427)

  at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)

  at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)

  at weblogic.application.internal.flow.ScopedModuleDriver.start(ScopedModuleDriver.java:201)

  at weblogic.application.internal.flow.ModuleListenerInvoker.start(ModuleListenerInvoker.java:249)

  to weblogic.application.internal.flow.ModuleStateDriver$ 3.next(ModuleStateDriver.java:427)

  at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)

  at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)

  at weblogic.application.internal.flow.StartModulesFlow.activate(StartModulesFlow.java:28)

  to weblogic.application.internal.BaseDeployment$ 2.next(BaseDeployment.java:672)

  at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)

  at weblogic.application.internal.BaseDeployment.activate(BaseDeployment.java:212)

  at weblogic.application.internal.EarDeployment.activate(EarDeployment.java:59)

  at weblogic.application.internal.DeploymentStateChecker.activate(DeploymentStateChecker.java:161)

  at weblogic.deploy.internal.targetserver.AppContainerInvoker.activate(AppContainerInvoker.java:79)

  at weblogic.deploy.internal.targetserver.BasicDeployment.activate(BasicDeployment.java:184)

  at weblogic.deploy.internal.targetserver.BasicDeployment.activateFromServerLifecycle(BasicDeployment.java:361)

  to weblogic.management.deploy.internal.DeploymentAdapter$ 1.doActivate(DeploymentAdapter.java:52)

  at weblogic.management.deploy.internal.DeploymentAdapter.activate(DeploymentAdapter.java:200)

  to weblogic.management.deploy.internal.AppTransition$ 2.transitionApp(AppTransition.java:31)

  at weblogic.management.deploy.internal.ConfiguredDeployments.transitionApps(ConfiguredDeployments.java:261)

  at weblogic.management.deploy.internal.ConfiguredDeployments.transitionApps(ConfiguredDeployments.java:246)

  at weblogic.management.deploy.internal.ConfiguredDeployments.activate(ConfiguredDeployments.java:170)

  at weblogic.management.deploy.internal.ConfiguredDeployments.deploy(ConfiguredDeployments.java:124)

  at weblogic.management.deploy.internal.DeploymentServerService.resume(DeploymentServerService.java:181)

  at weblogic.management.deploy.internal.DeploymentServerService.start(DeploymentServerService.java:97)

  at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)

  at weblogic.work.ExecuteThread.execute(ExecuteThread.java:256)

  at weblogic.work.ExecuteThread.run(ExecuteThread.java:221)

  In the workspace, it shows that the Service is pending.

  

  EMP Diagnostic Report:

  

  Can help kindly out how should I solve this problem.

  I restarted the services and rebooted the Machine but still getting the same error.

  Kind regards

  VJ

  
  

  Hello

  I've reconfigured the Reporting, analysis, and everything by, I chose "Drop table" and the issue was resolved.

  Kind regards

  VJ

• iAssets could not find the ID of the person:

  Hi team,
  A fixed asset is created in the FA module. The asset is visible in the iAssets module. When the iAssets module is open error "could not find the ID of the person:" is visible at the top. Further when we search in the tab "Search" Asset assets & add to assets or save for later we get the error "cannot find an object with the name of EmployeeVO.
  
  Can someone help me with this problem.
  
  Thank you.

  The profile Type HR HR option: User is not set to the level of responsibility. The problem is resolved.