Could not find the file "flash.ocx".

Similar Questions

• Cannot start service on local computer print spooler. Error 2 the system could not find the file specified. Please need file spoolsv.exe

  Ould does not start on local print spooler service. Error 2 the system could not find the file specified. Please need file spoolsv.exe

  Hello

  I suggest you try to launch the fixit of this link and check if it helps:

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems

  It will be useful.

• Impossible to install XP SP3 (could not find the file specified)

  I looked at and followed the steps described in

  Article ID: 950717 - steps to take before you install Windows XP Service Pack 3
   
  I do not have

  • Microsoft Shared Computer Toolkit
  • Pack MUI Remote Desktop Connection (RDP) 6.0 (update 925877 for Windows XP)

  I tried to install SP3 with and without my Antivirus, Antispyware and firewall running programs (several times – 4, 5, or more).  Each time, I get an error staing "could not find the specified file."  Then after being told that SP3 can not be installed and that "Windows XP has been partially updated and may not work properly", I have to restart my system.

  I also followed all the steps in this article (Article ID: 950718 - how to troubleshoot an installation fails in Windows XP Service Pack 3) and still the same thing as above.

   

  I tried to download SP3 directly from the Download Center - same results as before.

   

  I started the BITS service and tried again - same results as above.

   

  I've disabled auto updates and removed to software distribution (download renamed folder as shown) - same results as shown above.

   

  I tried to restore my system to an earlier date - 4 these attempts using different dates and set points during the last wee - ALL have failed.

  I also tried the proposals 1 to 3 in this article (Article ID: 950249-how to remove Windows XP Service Pack 3 from your computer), and none of these steps worked.

  I spent over 8 hours today and yesterday a couple just trying to solve this problem and still don't get anywhere.  I am beyond frustrated at this point.  I know that say Windows can not work properly, and I need my computer to do my job.  Any help would be appreciated.

  You could do a repair installation with a CD of Windows XP with SP3 integrated already.  However, unless this is a new installation that you have installed SP2 on so you could get then SP3 installed on it - you have obviously been broadcast for some time without a lot of fixed security and tastes and your system could very well be stripped because of this.

  Search for malware:

  Download, install, execute, update and perform analyses complete system with the two following applications:

  • MalwareBytes (FREE)
  • SuperAntiSpyware (FREE)

  Remove anything they find.  Reboot when necessary.  (You can uninstall one or both when finished.)

  Search online with eSet Online Scanner.

  The less you have to run all the time, most things you want to run will perform:

  Use Autoruns to understand this all starts when your computer's / when you log in.  Look for whatever it is you do not know using Google (or ask here.)  You can hopefully figure out if there are things from when your computer does (or connect) you don't not need and then configure them (through their own built-in mechanisms is the preferred method) so they do not - start using your resources without reason.

  You can download and use Process Explorer to see exactly what is taking your time processor/CPU and memory.  This can help you to identify applications that you might want to consider alternatives for and get rid of all together.

  Do a house cleaning and the dust of this hard drive:

  You can free up disk space (will also help get rid of the things that you do not use) through the following steps:

  Windows XP should take between 4.5 and 11 GB * with * an Office suite, editing Photo software, alternative Internet browser (s), various Internet plugins and a host of other things installed.

  If you are comfortable with the stability of your system, you can delete the uninstall of patches which has installed Windows XP...
  http://www3.TELUS.NET/dandemar/spack.htm
  (Especially of interest here - #4)
  (Variant: http://www.dougknox.com/xp/utils/xp_hotfix_backup.htm )

  You can run disk - integrated into Windows XP - cleanup to erase everything except your last restore point and yet more 'free '... files cleaning

  How to use disk cleanup
  http://support.Microsoft.com/kb/310312

  You can disable hibernation if it is enabled and you do not...

  When you Hibernate your computer, Windows saves the contents of the system memory in the hiberfil.sys file. As a result, the size of the hiberfil.sys file will always be equal to the amount of physical memory in your system. If you don't use the Hibernate feature and want to reclaim the space used by Windows for the hiberfil.sys file, perform the following steps:

  -Start the Control Panel Power Options applet (go to start, settings, Control Panel, and then click Power Options).
  -Select the Hibernate tab, uncheck "Activate the hibernation", and then click OK. Although you might think otherwise, selecting never under "Hibernate" option on the power management tab does not delete the hiberfil.sys file.
  -Windows remove the "Hibernate" option on the power management tab and delete the hiberfil.sys file.

  You can control the amount of space your system restore can use...

  1. Click Start, right click my computer and then click Properties.
  2. click on the System Restore tab.
  3. highlight one of your readers (or C: If you only) and click on the button "settings".
  4 change the percentage of disk space you want to allow... I suggest moving the slider until you have about 1 GB (1024 MB or close to that...)
  5. click on OK. Then click OK again.

  You can control the amount of space used may or may not temporary Internet files...

  Empty the temporary Internet files and reduce the size, that it stores a size between 64 MB and 128 MB...

  -Open a copy of Microsoft Internet Explorer.
  -Select TOOLS - Internet Options.
  -On the general tab in the section 'Temporary Internet files', follow these steps:
  -Click on 'Delete the Cookies' (click OK)
  -Click on "Settings" and change the "amount of disk space to use: ' something between 64 MB and 128 MB. (There may be many more now.)
  -Click OK.
  -Click on 'Delete files', then select "Delete all offline content" (the box), and then click OK. (If you had a LOT, it can take 2 to 10 minutes or more).
  -Once it's done, click OK, close Internet Explorer, open Internet Explorer.

  You can use an application that scans your system for the log files and temporary files and use it to get rid of those who:

  CCleaner (free!)
  http://www.CCleaner.com/
  (just disk cleanup - do not play with the part of the registry for the moment)

  Other ways to free up space...

  SequoiaView
  http://www.win.Tue.nl/SequoiaView/

  JDiskReport
  http://www.jgoodies.com/freeware/JDiskReport/index.html

  Those who can help you discover visually where all space is used.  Then, you can determine what to do.

  After that - you want to check any physical errors and fix everything for efficient access"

  CHKDSK
  How to scan your disks for errors* will take time and a reboot.

  Defragment
  How to defragment your hard drives* will take time

  Cleaning the components of update on your Windows XP computer

  While probably not 100% necessary-, it is probably a good idea at this time to ensure that you continue to get the updates you need.  This will help you ensure that your system update is ready to do it for you.

  Download and run the MSRT tool manually:
  http://www.Microsoft.com/security/malwareremove/default.mspx
  (Ignore the details and download the tool to download and save to your desktop, run it.)

  Reset.

  Download/install the latest program Windows installation (for your operating system):
  (Windows XP 32-bit: WindowsXP-KB942288-v3 - x 86 .exe )
  (Download and save it to your desktop, run it.)

  Reset.

  and...

  Download the latest version of Windows Update (x 86) agent here:
  http://go.Microsoft.com/fwlink/?LinkId=91237
  ... and save it to the root of your C:\ drive. After you register on the root of the C:\ drive, follow these steps:

  Close all Internet Explorer Windows and other applications.

  AutoScan--> RUN and type:
  %SystemDrive%\windowsupdateagent30-x86.exe /WUFORCE
  --> Click OK.

  (If asked, select 'Run'). --> Click on NEXT--> select 'I agree' and click NEXT--> where he completed the installation, click "Finish"...

  Reset.

  Now reset your Windows with this FixIt components update:
  How to reset the Windows Update components?

  Reset.

  Now that your system is generally free of malicious software (assuming you have an AntiVirus application), you've cleaned the "additional applications" that could be running and picking up your precious memory and the processor, you have authorized out of valuable and makes disk space as there are no problems with the drive itself and your Windows Update components are updates and should work fine - it is only only one other thing you need to do before you install Windows XP SP3:

  Get and install the hardware device last drivers for your system hardware/system manufacturers support and/or download web site.

  Come back and let us know a bit more information on your system - particularly the brand / model of the system, you have - and maybe someone here can guide you to the place s x of law to this end.

  Once the computer has been put by the top meat grinder (do it all, like data. even if you JUST did some of them) - download you ' HE Installer "SP3, save it to your desktop, restart and login as an administrator and run this file, following the signs.

• PSE 14 suudenly could not find the file, does not amymore

  Hello!

  After installation and execution of PES 14 for some time, the Publisher has stopped working

  What gives this error message. Reinstall does not help. the cover works fine, but not the Publisher.

  How ca I fix this?

  

  Contact adobe during the time pst support by clicking here and, when available, click on "still need help," https://helpx.adobe.com/contact.html

• backup error 0 x 80070002 could not find the file specified

  It seems that I last round and round with this new computer I almost from the first day.  It's just my last.  Windows backup will not work.  I tried to do a disc check, but who will also not unfold, I think he said that it is due to a recently installed software.  It is difficult to say that the screen is changing so fast even if I tried check disk several times just to read it (I guess I am a slow reader).  I checked recently install year there isn't anything other than Microsoft Security Essentials (they sent me the same update 3 times?) he says successful every time.  I have also updates from McAfee and Lenovo, but nothing suspicious.  I used OneKey Recovery (more recently) 05/10/2012 to return to IE 9, changed any settings, but I have only used Windows Easy Transfer to my music and documents.  I had problems on the first day about the standard user profile not being not able to save Favorites in IE 9, even today.  I can download, rip and burn CDs, no problem, I can access the internet via Google Chrome with IE 9.  When I used IE 9 as default and Norton security, I lost access and information about Internet Explorer were empty, have been the version number should have been.  I don't know what else to do now.  It looks like an another OneKey Recovery, followed of a check disk and start again.  McAfee says its about to expire, even if I have paid for an annual subscription 10/5.

  Hello

  -What is the recent software installed on your computer?
  -How much securtity software installed on your computer?
  -Did you do changes on the computer before this problem?
  I suggest you manually save (photos, files and all the other important things) on a disk drive or thumb and perform a clean install and check if the problem persists.
  http://Windows.Microsoft.com/en-us/Windows7/installing-and-reinstalling-Windows-7
   
  In addition, if the machine came preinstalled with McAfee or Norton using these tools below.

   

  1 McAfee is always on their machine as a trial that could cause some problems. I recommend this removal tool
  http://service.McAfee.com/FAQDocument.aspx?ID=TS101331

   

  2 Norton is on the machine as we must go as well

  https://www-secure.Symantec.com/Norton-support/JSP/help-solutions.jsp?docid=kb20080710133834EN_EndUserProfile_en_us&product=home&PVID=f-home&version=1&LG=en&CT=us

   

  Hope this information helps.

• My calendar widget has stopped working. I uninstalled, but could not find the file to reinstall. Can anyone help?

  I have Vista running in 32-bit mode on a laptop Dell 1725.

  Hi r. g. Wormdahl,.

  1. How did you uninstall it?

  2 are facing problems with the Windows Calendar gadget?

  You can try to run a SFC scan and check.

  This problem may occur if a system file is missing or damaged.

  You can refer to the method-the System File Checker tool in the following article:

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  You can also check out the following link and check.

  Windows Sidebar and gadgets

  http://Windows.Microsoft.com/en-us/Windows-Vista/Windows-Sidebar-and-gadgets-overview#section_4

  Hope this information is useful.

• When I open my browser Google Chrome I get error "could not find the translation file:...\pivot.ini [WPCTRL95] does not work.

  Hello

  I have the same problem. The error message appears when I open my browser Google Chrome (Yes, only that browser). The full message is: could not find the file:...\pivot.ini translation [WPCTRL95] will not run.
  What kind of changes? As far as I know, I did not bring changes of lipids to my computer or programs. The thing is that I for a moment, and I don't recall the exact moment when it appeared.

  Hello

  Please take a look at the thread similar here with a solution as possible.

  I hope this helps!

• Can not find the file init for the database instance

  I have installed Oracle 10 g under Linux CentOS, run netca to create listener.ora and tnsnames.ora files, then I run dbca to create the myodb database and orcl instance.
  
  
  
  Now when I run dbstart, in the boot log, that it is said that he could not find the file orcl example init. so that the database myodb, he says:
  
  < em > / oracle/product/10.2.0/db_1/bin/dbstart: database instance "myodb' hot began.
  
  
  
  
  
  < /em > my questions:
  
  
  
  1. why it is said when I run dbstart both myodb & orcl are instances of database, I created myodb as the General database, while orcl corresponds to the instance, here it says:
  
  instance of < em > data treatment "orcl": journal file /oracle/product/10.2.0/db_1/startup.log
  
  Database instance "myodb' of treatment: save the /oracle/product/10.2.0/db_1/startup.log file
  
  
  
  < /em > is the name of the General database is considered an instance itself and can be used alternatively with the instance of word?
  
  
  
  2 when I created the database using dbca, I made the password for users of SYSTEM & SYS.
  
  
  
  When I try to connect to sqlplus using the system/mypassword, here it says:
  
  
  
  < strong > < em > ORA-01034: ORACLE is not available
  
  ORA-27101: shared memory realm does not exist
  
  Linux error: 2: no such file or directory < /em > < / strong >
  
  
  
  3. the database myodb started but it is not mentioned in my tnsnames file or the listener, while one mentioned is orcl has not begun, how is it? I know I'm missing a dir for /orcl in/oracle/home/admin, something that we find for the myodb, where there is/oracle/home/admin/myodb/pfile/init file.
  
  
  
  How can I fix this?
  
  
  
  4. What is the use of the command sql, < strong > edit < facilities > system registry, told me in another thread to connect to an idle instance with sqlplus and run this command, here what I got:
  
  
  
  < em > ERROR on line 1:
  
  ORA-01034: ORACLE not available
  
  
  
  < /em > 5 - can I just rely on the name of the General database and forget the thing of the Forum? I'm just confused about the difference and do not know how the orcl instance was created, it has not been created with dbca, because when I run dbca he says it's already there, create another instance, so I commented the sid parameter and now I amn't during its creation and how to retrieve its files if I need to re - create it again.
  
  
  
  Note: it is located in the bash_profile as $ORACLE_SID = orcl, why it's the only game, while General MYODB database name is not set, can be there rather than on the instance or SID in the bash_profile?
  
  
  
  
  
  Sorry for the many questions, this is the thing of the instance and their related discipline, I appreciate your help.
  
  
  
  Thanks in advance.
  
  
  
  
  

  If you have only 1 instance "orcl" then the oratab file should have only 1 entry - only for "orcl". Along, only one instance "myodb" {with the db_name "myodb"} must be started.
  The database Instance is identified by the SID - IE the ORACLE_SID.

  Normally, the SID and DB_NAME are the same - and they do like default value is the same when you run dbca. You have changed probably manually the db_name in dbca.

  If the listener is running on port 1521 and is started before the database instance, the database instance automatically saves with the listener. If the listener is started after the database instance, and then the command 'ALTER SYSTEM REGISTER' in the database instance indicates PMON to register with the listener.
  If you do not want to depend on the automatic check of the database with the listener instance, then you can include the information database (SID!) in the listener.ora. In addition, which would be caused if the listener is not on the default port 1521.

  See my posting in this thread: oracle sid and database the name of for more notes.

  A database can contain multiple schemas - each schema is a different database account. In other implementations of database (non-Oracle), what is called a "database", it is called a 'plan' in Oracle - but that is created as a database account. Database accounts are listed in DBA_USERS - if a user "owns" objects, it's a 'plan', otherwise, it is only a user. {Oracle also provides a CREATE SCHEMA command to create multiple objects in a single command.}

  Hemant K Collette
  http://hemantoracledba.blogspot.com

  Published by: Hemant K grapple on November 6, 2008 09:31
  corrected "orcl" to "myodb.

• Could not mount the file. It has not been possible to find a filter for the requested command.

  Get the error message:

  Could not mount the file. It has not been possible to find a filter for the requested command.

  Why is - this happens when I open documents using Mac advertising agency and I'm on PC?

  Hi Mikael,

  files have been archived in archive zip-file when transferred via the ftp protocol? I guess, not.

  If the files were already placed in a document, InDesign on the agency side the following workflow might be the solution:

  Office on Mac OSX:

  1 package the InDesign document, as well as placed images and fonts of the necessary document with InDesign packing device.

  2. the folder packed in a zip zip file.

  3. download the zip file to an ftp server

  You on Windows:

  1. download the zipfile to your own workload.

  2 unzip the zip on your workload. Do not delete the zip file.

  3. rename the folder of the package to fit your scheme of naming of jobs (option)

  4 rename the InDesign document to adapt to your schema naming of jobs (option)

  5. open the InDesign file in the packed file.

  Do not move or save somewhere else.

  Alternative:

  Work with Dropbox to share documents on a shared volume of Dropbox, if documents must move forward and backward between you and the Agency.

  Uwe

• Illustrator could not find the linked file

  When I open an Illustrator file that uses linked pictures, I get a warning that it could not find the linked files and asking me to fix all the links one by one! Linked images are sitting in the same folder as the Illustrator file that uses. HAVE this problem only occurs when I need to open the file on another computer (PC or Mac) and I guess that's because Illustrator uses an absolute path to the loading of the images related rather than a relative path based on the location of the file.

  Everyone knows the same problem? All solutions?

  Software: Adobe Illustrator CS3

  Hardware: Windows XP PC and Mac OSX

  Thank you

  Saeid

  Are all the files in the same folder and they create and save this

  document with all in the same folder. If they created the

  the document with files in other places and then moved the files to the

  good record, it will not work.

• Pop - up screen "cannot find the file swflash.ocx.

  I frequently get a pop up screen that says 'could not find the swflash.ocx file' - how can I get rid of this?

  You posted on a forum for users of the software program anti-malware for Microsoft Security Essentials (MSE).

  Your problem is related to Flash Player.

  Suggest that you uninstall your current version of flash player to include the use of the Flash Player uninstaller and then download/install the latest version of Flash Player.

  Suggest that you only contact http://www.adobe.com/support/flashplayer/

• Error code 28: could not find the drivers. Windows 7 64 bit could not find the drivers for my Seagate Expansion Portable Drive. The same system works for another 32-bit version of windows 7.

  Hi, I would be grateful for help on this, I bought a new seagate expansion external hard drive not too long ago (abt 3 months old) and tried to use the device only recently (to back up my files). Windows has detected the drive but says that it could not find the drivers. (code 28)

  When I tried the drive on a 32-bit computer, it showed up working find and dandy. When it is plugged in the computer of the alien-ware, same error.
  Tried the uninstall from Device Manager and restart the computer, still the same error.
  Services.msc open and found windows install offshore. He turned on automatic, but the same error came out. Plug and play Windows was already working.
  Checked Windows SP1 worked, still the same error.
  He got me completely baffled.
  Before this, I had other problems with USB and disabled driver signature Verifier (I think that's what it was called) before you boot into windows. Worked very well for my flash drives each time that I did.
  I also had another external HARD drive which was held only 160G and it worked, so I'm not sure what the problem is with this particular external hard drive.
  Please help, I'm going crazy on this problem...

  The specifications of my devices are as follows:

  Computer

  Model:

  Alienware M14x

  Type of system:

  64-bit operating system

  Hard drive model:

  Portable Seagate Expansion 1 TB drive

  Hello

  28 error code means that the device was not fully installed.

  Method 1: Connect the device, run the hardware and devices Troubleshooter and check if that helps.

  To open the Troubleshoot utility equipment follow the given link:

  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

  Method 2: You can update the drivers and check out them.

  Updated a hardware driver that is not working properly:

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  Additional information.

  Install a USB device:

  http://Windows.Microsoft.com/en-us/Windows7/install-a-USB-device

  Hope this information helps.

• could not find the drivers for window7 32 bit 15-d018TU hp

  Dear Sir, I recently bought 15-d018TU with window 8.

  I installed 32 bit Windows 7.

  but I could not find the drivers for window7 32 bit.

  I need drivers now

  1 network cards

  Bluetooth 2 controller

  3 network controller

  4 PCI simple communication controller

  5 SM bus controller

  USB 6 bus controllers

  7 Ethernet controller

  Hello:

  You should be able to use all the W7 32-bit drivers and software from the HP Probook 450 G0 on your model, except the audio.

  Your model uses the Intel HD graphics driver.

  DO NOT USE ANY BIOS OR THE FIRMWARE OF THIS MODEL FILES

  http://h20565.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdHome/?sp4ts.oid=5359407&spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3DswEnvOID%253D4052%257CswLang%253D%257Caction%253DlistDriver&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

  Audio: Accept the agreement.  Download and install the driver first on the list.

  http://www.Realtek.com.tw/downloads/downloadsView.aspx?langid=1&PNid=24&PFID=24&level=4&Conn=3&DownTypeID=3&GETDOWN=false

• HP Pavilion 15-p031st: I could not find the drivers for Win7

  Hello!

  I could not find the drivers for win7. Except these things, my computer works perfectly with win7.

  BCM43142A0: USB\VID_0A5C & PID_216C & REV_0112 (I think it's a bluetooth driver)

  Unknown device: ACPI\HPQ6007 (I don't know, but it is a driver of Wi - fi button)

  Driver Finder online from HP could not find those too. I don't want to use win8 on my laptop because ı couldn't figured out. So please help as soon as possible...

  Greetings from the Turkey

  Hello:

  You need this driver for the 6007:

  This package provides the HP 3D Driveguard software (HP ProtectSmart hard drive Protection) for the laptop models running a supported operating system. HP 3D Driveguard protects the drive hard by parking the heads if cell phone accidentally falls, or is suddenly struck by another object.

  File name: sp67280.exe

• The system could not find the environment option that was entered.

  I have Vista Home Premium. I must have met a significant corruption or a virus. Here's what the system won't let me do.

  System restore
  Launch any program exe
  run cmd as administrator
  launch msconfig
  Basically, everything I download don't throw (including several ladies virus recommended this forum and others)
  If it's a virus, he got by AVG free edition
  Safe mode does not enable all the options I get always "the system could not find the environment option that was entered."
  It of almost as if someone really took time to reflect on how to thwart an attack and then implemented in the opposite direction.

  Is blowing the entire disk and back at my only option?

  Help!; 0

  Zitouni,

  Thanks for your reply, good point on the File Checker, I didn't know that. Unforuneatly I have not see your reply until I decided it was time to re - install the system. One thing to note, I couldn't do a 'run as administrator' anyway possible. This system was really corrupt which leads me to believe that he may have been a NTFS/Fat 32 Co-mingling question. Just a guess, but I really don't see how it could have happened otherwise.

  Another thing to note, if you have a Dell Inspiron 1720 with a 250Gig HD-make sure that you format the partition, you then load the SATA drivers! Also, make sure that the restore partition does not primary. Make sure that you format (assuming that you have backed up your data before!). Otherwise, it hangs on Setup to complete the installation. Who took me ahwhile to understand.

  Everything is cool now (reinstalled Vista), just thank ful there is a site like this to run things by! ;)

  Concerning

  Jeff