Could not get a sound and webcam along under windows

Similar Questions

• Satellite P200 - 1 K 8 - could not get the display and audio drivers to work

  Hello.
  I'm getting desperate. I tried everything I could imagine.

  First of all - do not get the control center catalyst to work, I don't have the graphics driver installed now (I tried both - Toshiba and Mobility Modder modified driver ATi - none works.)
  Second - when I install the audio driver Realtek audio Manager is encoutering the problem and needs to close every time at startup. And Yes, I updated the BIOS to version 5.20 installed XPSP3, chipset driver installed (the most recent Intel homepage or one of Toshiba, anyone, always the same question).

  Help, please. I don't want to spend the rest of my life trying to get XP on my laptop.
  Thanks in advance.

  Can you please send the number of full model of your laptop?

• Do not get the sound after having moved to windows 7 Windows 8

  No sound in Windows 7

  Sound indication bar is moving, but I can't hear anything. I checked the speaker connections and even tried the plug to headphones, but still no sound. Device Manager does not have any problem, and I don't get the error messages.

  Here is my system information:

  Motherboard: HP183F

  HDAUDIO\FUNC_01 & VEN_8086 & DEV_2806 & SUBSYS_80860101 & REV_1000
  HDAUDIO\FUNC_01 & VEN_8086 & DEV_2806 & SUBSYS_80860101
  HDAUDIO\FUNC_01 & VEN_111D & DEV_76D9 & SUBSYS_103C183F & REV_1001
  HDAUDIO\FUNC_01 & VEN_111D & DEV_76D9 & SUBSYS_103C183F

  Hi Isabelle,.

  I would like to know some information about the problem so that we can help you better.

  What is the brand and model of your computer?

  Thank you for details on the issue.

  I also know that the inconvenience that you are experiencing because of his problem. I will definitely help you.

  This problem can occur either because of corrupt audio driver or incorrect audio settings.

  I would suggest trying the following methods and check if it helps.

  Method 1:
  Troubleshooting of audio playback and check.
  Reference:
  Open the troubleshooting of Audio playback
  http://Windows.Microsoft.com/en-us/Windows7/open-the-playing-audio-Troubleshooter

  It search common problems with your volume settings, your sound card or driver and your speakers or a headset.

  If this does not help, use method 2.

  Method 2:
  Please use the suggestions in this article and check the issue.
  Reference:
  No sound in Windows
  http://Windows.Microsoft.com/en-us/Windows/no-sound-help#no-sound=Windows-7&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  I hope this information helps.

  Please let us know if you need more help.

  Thank you

• Could not get a sound device QED uplay.

  Original title: qed uplay

  Hello. I use Windows 7 64-bit. I bought a bluetooth dongle to connect to a device of QED uplay. To listen to the music from your computer on my stereo.

  Drivers for the dongle seems good work, and the computer recognizes the QED uplay as a headphone unit to listen I guess that's the closest it will get - but no sound of music from the stereo. Do I need to install drivers for the QED unit? Although the QED unit is registered in page units and printers, it is not available as a player unit in the sound properties. What should do? -Aimablement

  Hi LasseFurdal,

  This problem can occur if the device of QED uplay is not defined as device by default.

  I suggest you to set the default device as QED uplay device and check if it helps.

  a. go to Start and click on Control Panel.
  b. click on her, then a new window will open.
  (c) in the new window click on the tab 'read' and right click on the window. d. click Show disabled devices.
  e. check if the speaker or headset is listed here.

  f. right - click top and select Activate.
  g. highlight the headset (QED uplay device) and click on "set as default".

  Hope this information helps. Answer the post with an up-to-date issue report to help you further.

• The next step in my game: could not get integrated sound in my addEventListener

  I tried to put the init() function in my loop in the fire, but it does not work.

  stage.addEventListener (MouseEvent.CLICK, myClickReaction);
  speeds the LONG NYPOTENUSE
  var v: Number = 5;
  var varObject:String;
  var i: Number;
  var arrayObjects:Array;
  var soundClip:Sound;

  complete table and initialize the variables i and varObject
  arrayObjects is ['chocolate', 'ice', 'pizza', 'Burger', 'sandwich', 'egg'];.
  i = 1;
  varObject = arrayObjects [i-1];
  trace (varObject);

  
  mouse click point
  var clickPoint:Point = new focus();
  function myClickReaction(e:MouseEvent):void {}
  clickPoint.x = mouseX;
  clickPoint.y = mouseY;
  addEventListener (Event.ENTER_FRAME, onEnterFrame);
  addEventListener (Event.ENTER_FRAME, enterFrameHandler);
  }
  function onEnterFrame(event:Event):void {}
  var xDistance:Number = clickPoint.x - sunny.x;
  var yDistance:Number = clickPoint.y - sunny.y;
  var angle: Number = Math.atan2 (yDistance, xDistance);
  Sunny.x += v * Math.cos (angle);
  Sunny.y += v * Math.sin (angle);
  If (clickPoint.x > = sunny.x) {}
  sunny.gotoAndPlay ("walk straight");
  trace (Math.ABS (xDistance));
  }
  If (sunny.x > = clickPoint.x) {}
  sunny.gotoAndPlay ("left foot").
  trace (Math.ABS (xDistance));
  }
  If (Math.abs (xDistance) < = 10) {}
  trace ("Works");
  sunny.gotoAndPlay ("static");
  removeEventListener (Event.ENTER_FRAME, onEnterFrame);
  }
  }
  addEventListener (Event.ENTER_FRAME, enterFrameHandler);
  function enterFrameHandler(e:Event):void {}
  If (sunny.hitTestObject (this [varObject])) {/ / this property refers to the referenced mc and it's an array you also need hooks}
  Init();
  i = i + 1; / / ie: he comes to the table object and NOT the string.
  varObject = arrayObjects [i-1];
  trace (varObject); / /, BUT you can draw the STRING IE: no need to use OBJECT (STRING) - that would be the real mc.
  removeEventListener (Event.ENTER_FRAME, enterFrameHandler) ;// IE: you can't do a hitTest on a string, BUT on an object. (The Bay)
  }
  }

  //var soundClip:Sound;
  
  function init() {}

  soundClip = new Sound();
  soundClip.load (new URLRequest ('< sound/chocolate >'));
  soundClip.addEventListener (Event.COMPLETE, soundLoaded);
  soundClip.addEventListener (ProgressEvent.PROGRESS, soundLoading);

  }
  init();
  
  function soundLoaded(e:Event) {}

  soundClip.play ();

  }
  
  function soundLoading(e:ProgressEvent) {}

  Insert here the Preloader information

  }

  If you're only terminates the loop when there is a positive placement test, you will need to use the loop.

• HP envy 7645: could not get the printer and computer to connect

  Have the computer and the printer on the same network.  Have loaded the correct drivers but the computer cannot set up the printer to connect.   Used to work properly.    Have tried with and without USB cable.   Very frustrating.

  Any ideas?

  Thank you

  Jim Gemmer

  Hello

  Thank you for using the HP Forums.

  Please visit this resource:

  software of Sierra to download and install macOS 10.12

  If you need help to connect your wireless printer, please watch this video about setting up the wireless configuration wizard:

  https://goo.GL/adPh0l

  @Time 01:54 to go.

  Hope that helps!

• I installed kies, but could not get my phone must be recognized in Windows XP.

  X / P with a samsung ace

  I am running windows X / House P. I just got a samsung ace, I loaded kies but I can't get my phone to work with it, all I get is Ref to object 'fatal error' not set to an instance of an object. If anyone can help.

  Hello

  I suggest you to contact Samsung support for assistance on the issue.

  http://www.Samsung.com/us/support/contact

• Could not get access to manage extensions / plugins under the help tab.

  I'm working on a desktop Windows OS 8.0. On the help tab, I can't access the line 'manage extensions', but just below the legal notifications. I'm Dutch, so I don't really know if it's the right translation. I use PS CC.

  I think you are talking about CC 2014

  Photoshop CC 2014 release: FAQ

• Good afternoon my windows live has been hacked and unable to access my account, tried to reset my password but still could not get my mail

  Good afternoon my windows live has been hacked and unable to access my account, tried to reset my password but still could not get my mail

  Hello

  The question you posted would be better suited to Windows Live Solution Center. I suggest you to send your application in the Windows Live Solution Center for better support.
   
  http://windowslivehelp.com/product.aspx?ProductID=15

• Impossible to analyze the xml.aspx contained in the main.js.Iam get the following error"could not obtain XML document, and the connection has failed: status 500

  Impossible to analyze the xml.aspx contained in the main.js.Iam get the following error"could not obtain XML document, and the connection has failed: status 500

  My main.js resembles

  xmlDataSource var = {}
   
  URL: 'dcds. - symbianxml.aspx", etc. (sample).
   
  init: function() {}
  URL, successful reminder, the reminder of failure
  This.Connect (this.) (URL, this.responseHandler, this.failureHandler);
  },
   
  /**
  * Analyzes the XML document in an array of JS objects
  @param xmlDoc XML Document
  * @returns {table} array of objects of the device
  */
  parseResponse: {function (xmlDoc)}
      
  var chElements = xmlDoc.getElementsByTagName ("channel");
     
  channels of var = [];
    
  Console.log (chElements.Length);
    
  for (var i = 0; i)< chelements.length;="">
      
  var channel = {};
     
  for (var j = 0; j)< chelements[i].childnodes.length;="">
      
  var node = Sublst.ChildNodes(1).ChildNodes(0) chElements [i] [j];
              
  If (node.nodeType! = 1) {//not an element node}
  continue;
  }
         
  Channel [node. TagName] = node.textContent;
  }
     
  Channels.push (Channel);
  }
  Console.log (Channels.Length);
  return the strings;
  },
   
  /**
  Manages the response and displays the data from device web app
  @param xmlDoc
  */
  responseHandler: {function (xmlDoc)}
    
  var channel = this.parseResponse (xmlDoc);
  var markup = "";
     
  for (i = 0; i< channels.length;="">
     
  markup += this.generateHTMLMarkup (i, channels [i]);
  }
  document.getElementById("accordian").innerHTML = mark-up;
  },
   
  /**
  Generates HTML tags to insert in to the DOM Web App.
  * @index i, index of the device
  @param device, device object
  */
  /*
  generateHTMLMarkup: function (i, channel) {}
    
  var str ="";
  "Str += '.

  
  ' onclick =-"mwl.setGroupTarget ('#accordian ',' #items_" + i + "', 'ui-show ',' ui - hide');" + ".
  "mwl.setGroupTarget ('#accordian ',' item_title_ #" + i + "', 'ui-open', 'ui-farm'); Returns false; \ » > » ;
  "" Str += "" + channel ['name'] + ' ";
  "Str += '.
  ";
  "Str += '.

  ";
  "Str += '.

  "+" id: "+ channel ['id'] +" ' "

  ";
  "Str += '.

  "+" type: "+ channel ['type'] +" ' "

  ";
  "Str += '.

  "+" language: "+ channel ['language'] +" ' "

  ";
  "Str += '.

  «+ "bandwidth:" + "fast" channel + "»»

  ";
  "Str += '.

  "+" cellnapid: "+ channel ["cellnapid"] +". "

  ";
  "Str += '.

  «+ ' link: '+'start the video »»

  ";
  "Str += '.
  ";
  return str;
  },*/
  generateHTMLMarkup: function (i, channel) {}
     
  var str ="";
  "Str += '.
  ";
  str +=  "" +
  "" + channel ['name'] + ""+""
  ";
  "Str += '.
  «+ ' link: '+'start the video »»
  ";
       
  return str;

  },
   
  failureHandler: {function (reason)}
  document.getElementById("accordian").innerHTML = "could not get XML document.
  '+ reason;
  },
   
  /**
  Retrieves a resource XML in the given URL using XMLHttpRequest.
  @param url URL of the XML resource to retrieve
  @param called successCb, in the XML resourece is recovered successfully. Retrieved XML document is passed as an argument.
  @param failCb called, if something goes wrong. Reasons, in text format, is passed as an argument.
  */

  Connect: {function (url, successCb, failCb)
    
  var XMLHTTP = new XMLHttpRequest();
    
  XMLHTTP. Open ("GET", url, true);

  xmlhttp.setRequestHeader("Accept","text/xml,application/xml");
  xmlhttp.setRequestHeader ("Cache-Control", "non-cache");
  xmlhttp.setRequestHeader ("Pragma", "non-cache" "");
    
  var that = this;
  XMLHTTP.onreadystatechange = function() {}
     
  If (xmlhttp.readyState == 4) {}
      
  If (XMLHTTP. Status == 200) {}
       
  {if (!) XMLHTTP.responseXML)}
  try {}
  If server has not responded with good an XML MIME type.
  var domParser = new DOMParser();
  var xmlDoc = domParser.parseFromString(xmlhttp.responseText,"text/xml");
         
  successCb.call (that, xmlDoc);
         
  } catch (e) {}
  failCb.call (, "answer was not in an XML format.");
  }
            
  } else {}
  successCb.call (that, xmlhttp.responseXML);
  }
  } else {}
  failCb.call (this, "connection failed: status"+ xmlhttp.status ");
  }
  }
  };
  XMLHTTP. Send();
  }
  };

  Please see the content in main.js is fully analyzed.

  Forward for the solution to my request all members of the community...

• Could not get the Source monitor and program to display together

  Hi, I use Premiere Pro constantly for about 6 or 7 years and have never had problems with the monitors Source and program appearing side by side in my workspace.  I've recently updated to CC and, in addition to having one monitor 'fixed' and a sudden 'floating' (I've unable to paste the two up, but would have a run on my second monitor) it was working OK. The last two days, I can't set both monitors. I double click on a clip in the project, and it is not displayed anywhere.

  My preference is to set the workspace to imitate CS5.5, but this option is sorting is no longer the problem.  I'm trying to go back to the previous workspace and it tells me that there is not.  I tried control boxes and uncheck the menu window. Any help would be appreciated.

  

  Source monitor can normally be added to any 'panel' by clicking on the Panel, then in the menu dropdown you show, by clicking on the Source monitor... then navigate to it by selecting the tab is in the Panel that was highlighted when you clicked.

  You can change the panels by "entering" a title as source or scopes or whatnot too and drag in or to another palette, with the possibility of having always appear (for example, if you then release in the area left highlighted a Panel, you drag in) to the left of other things in the control panel... or if you say leave in the Middle then it displays when you select the tab at the top of the Panel. Others cover it when you click on the tabs. I think that the help pages following (they aren't long) could you get:

  Use and customize workspaces in Premiere Pro

  Working with panels in Premiere Pro

  Using the Source program monitor in Premiere Pro

  Things have changed a lot since 5.5...

  Neil

• Received a flashing alarm indicating that I had a virus on my MacBook pro.  Could not get rid of it, until I did a hard reboot.  Deemed scan of Malware for Mac software?  All this experience?

  I just got an alarm flashing indicating that I had a virus on my MacBook pro.  Could not get rid of it, until I did a hard reboot.  Deemed scan of Malware for Mac software?  All this experience?

  These alarms are generally scam popups loaded from the Internet and is not caused by malicious software, but you should always look for other odd behavior or unexplained slowness.

  (140573)

• Need sound and webcam drivers for Satellite A660-156

  Hi all

  my hard drive is physically damaged and replaced with a new one. All the data and setting have been copied.

  But I found that you no sound and webcam drivers are installed. I had found them and correctly installed, but still no change. See its icon with indication 'no sound', click on it to solve the problem, but no problems were discovered.

  Offered to see additional information or close the window. The Toshiba site found two audio drivers, but it does not help.

  No idea how to solve this problem?

  Thnx in advance!

  Satellite A660-156 belongs to the PSAW3E series.
  Did you find this series on the Toshiba driver page?

  This series is in the list and you can find the drivers for Win 7 64 bit it.

  You can find the Webcam driver v 1.1.1.16 for Win 7 64-bit and two different audio drivers;
  It is NVIDIA v 1.0.10.0 and the other is v Realtek 6.0.1.6069

  I think you need the first v 1.0.10.0

• Password: can not get in line and my laptop will not accept my password

  yesterday morning I went online with no problems, but when I tried later in the day that my phone does not accept that my password so could not get online - tried again this morning without modification.

  Thank you Mick for your repl to my problem, the problem is I can't on line at all. I use now the phone my wife to try to get help.

  Eddie

  It has nothing to do with getting online with your computer.

  Use portable your wife to read, what you arereading here.

  Everything I told you to do it was to read what was at this link to try a ssolve your problem:

  If you can't do it, comsider reinstall Vista.

  If you are unable to connect to Windows 7 or Windows Vista, you can use the Windows Vista System Restore feature, or the Windows 7 system restore feature.

  You may be unable to connect to Windows Vista or Windows 7 in the following scenarios:

  • Scenario 1: You recently set a new password for the protected administrator account. However, you don't remember the password.
  • Scenario 2: You type the correct password. However, Windows Vista or Windows 7 does not accept the password because the system is damaged.
  • Scenario 3: You delete a protected administrator account. Now, you cannot connect to another administrator account.
  • Scenario 4: You change an administrator account protected with a standard user account. Now, you cannot connect to another administrator account.

  To use system restore to log on Windows 7 or Windows Vista when you lose access to an account, follow these steps.

  Note To do this, there must be a restore point from the system in which the connection was successful.

  1. Insert the Windows Vista or Windows 7 DVD, and restart the computer.
  2. When you receive the following message appears, press a key:
     Press any key to start from the CD or DVD.
  3. Set the following preferences and then click Next:
     • To install language
     • Time and currency formats
     • Keyboard or input method
  4. Click repair your computerand select the operating system you want to repair, and then clickNext.
  5. Click System Restore, and then click Next.
  6. Click on the food that you want to use, and then click Next.

     Note Click a restore point that will return the computer to a State where the connection is successful. After you use the system restore feature, reinstall all programs or updates that can be removed. You won't lose any personal documents. However, you may have to reinstall programs. You may also need to reset some personal settings.

  7. Confirm the disks that you want to restore, and then click Next.
  8. Click Finish, and then click Yes when you are prompted.
  9. When the system restore process is complete, click restart to restart the computer.
  10. Once the computer restarts, click close to confirm that the system restore process has finished successfully.
  11. Use an appropriate method to open a session. For example, log in using an older password, or log in using another computer account.

  After you connect, you must follow additional steps, depending on the scenario you encounter.

  Back to top

  Additional steps for scenario 1

  1. After you log on, change the password for the protected administrator account.
  2. After you change the password, restart the computer. Make sure that you can connect by using the new password.
  Back to top

  Additional steps for scenario 2

  1. After you log on, make sure that each user account can log in using the appropriate credentials.
  2. Change the password for the user account that cannot log on.
  Back to top

  Additional steps for scenario 3

  1. After you log on, use the element user accounts in Control Panel to create a new protected administrator account.
  2. Log in using the new protected administrator account. Then delete the older protected administrator account which has been restored.

     Note For security reasons, do not use the restored protected administrator account.

  Back to top

  Additional steps for scenario 4

  1. After you log on, use the element user accounts in Control Panel to create a new protected administrator account.
  2. Log in using the new protected administrator account.
  3. Change the old administrator account protected with a standard user account.

  Mick Murphy - Microsoft partner

• Windows could not get a list of devices from Windows Update. Try again later

  Original title: Windows 7 list printers cannot be updated
  I installed a windows 32 bit 7 OS several weeks ago on my workstation Futitsu-Siemens and followed the instructions on the HP Wizard to try to install the HP Deskjet 990c printer driver for my HP 6122 printer. According to the HP Wizard, the only way to do is to update the list of printers by clicking on the "Windows Update" button in the dialog "add a printer".  I clicked on this button several dozen times in recent weeks, and every time I get the message "Windows could not get a list of devices from Windows Update. Try again later.

  I installed a windows 32 bit 7 BONES of several months on my HP laptop and the printer list updated without a hitch to include many more HP printers that are on my computer Futitsu-Siemens including HP 990c.

  What should I do?

  Here's what I found my system which is an Z210 64 HP running windows7. I just updated my Bios to v1.35

  What I did to get the update to work once and what I have to do each time to add another printer by using the Update window.

  1. open (Ctrl-Alt-Del) Task Manager

  2. click on tab of abuse, then Services button (bottom-right)

  3. under the name to find "Windows Update".

  4. right click "Windows Update" and select stop. do not close

  5. open the Exploper window and browse to C:\Windows

  6 delete the folder "C:\Windows\SoftwareDistribution".

  7. go back to served, right click on "Windows Update", and then select start

  Now the "Windows Update" button should work. For me I have to do every time I have to install a printer that requires me to use windows update

  Looking for what casues the error

  at the bottom of a file named WindowUpdate.log located in C:\Windows after that I get the message "Windows was unabel to...» "I have this text below.

  2012-04-30 14:20:18:782 284 5cc Agent *.
  2012-04-30 14:20:18:782 284 5cc Agent * START * Agent: finding updates [CallerId = CDM] of
  2012-04-30 14:20:18:782 284 5cc Agent *.
  2012-04-30 14:20:18:782 284 5cc Agent * Online = Yes; Ignore download priority = No
  2012-04-30 14:20:18:782 284 5cc Agent * criteria = "Type ="Driver"and DeploymentAction = 'Installation' and DriverClass = 'Printer' and DriverMatch = 'Catalogue'"
  2012-04-30 14:20:18:782 284 5cc Agent * ServiceID = {9482F4B4-E343-43B6-B170-9A65BC822C77} Windows Update
  2012-04-30 14:20:18:782 284 5cc Agent * scope of search = {Machine}
  2012-04-30 14:20:19:952 284 5cc Misc validation signature for C:\Windows\SoftwareDistribution\WuRedir\9482F4B4-E343-43B6-B170-9A65BC822C77\muv4wuredir.cab:
  2012-04-30 14:20:19:952 284 5cc Misc Microsoft signed: Yes
  2012-04-30 14:20:20:030 284 5cc Misc validation signature for C:\Windows\SoftwareDistribution\WuRedir\9482F4B4-E343-43B6-B170-9A65BC822C77\muv4wuredir.cab:
  2012-04-30 14:20:20:030 284 5cc Misc Microsoft signed: Yes
  2012-04-30 14:20:20:030 284 5cc PT +++ PT: Synchronizing server updates +++
  2012-04-30 14:20:20:030 284 5cc PT + ServiceId = {9482F4B4-E343-43B6-B170-9A65BC822C77}, URL of the server = https://www.update.microsoft.com/v6/ClientWebService/client.asmx
  2012-04-30 14:20:22:183 284 5cc Misc validation signature for C:\Windows\SoftwareDistribution\WuRedir\9482F4B4-E343-43B6-B170-9A65BC822C77\muv4wuredir.cab:
  2012-04-30 14:20:22:183 284 5cc Misc Microsoft signed: Yes
  2012-04-30 14:20:22:214 284 5cc Misc validation signature for C:\Windows\SoftwareDistribution\WuRedir\9482F4B4-E343-43B6-B170-9A65BC822C77\muv4wuredir.cab:
  2012-04-30 14:20:22:214 284 5cc Misc Microsoft signed: Yes
  2012-04-30 14:20:22:214 284 5cc PT +++ PT: synchronization of applicable printers +++
  2012-04-30 14:20:22:214 284 5cc PT + ServiceId = {9482F4B4-E343-43B6-B170-9A65BC822C77}, URL of the server = https://www.update.microsoft.com/v6/ClientWebService/client.asmx
  2012-04-30 14:20:23:072 284 5cc PT WARNING: SyncPrinterCatalog failed, error is 0x8024400D, the soap client error = 7, soap = 300, HTTP = 200 status code error code
  2012-04-30 14:20:23:072 284 5cc PT WARNING: SOAP fault: 0x00012c
  2012-04-30 14:20:23:072 284 5cc PT WARNING: faultstring:Fault has occurred
  2012-04-30 14:20:23:072 284 5cc PT WARNING: ErrorCode:InvalidParameters (7)
  2012-04-30 14:20:23:072 284 5cc PT WARNING: Message: printerUpdateIDs
  "" 2012-04-30 14:20:23:072 284 5cc PT WARNING: method: "http://www.microsoft.com/SoftwareDistribution/Server/ClientWebService/SyncPrinterCatalog"
  2012-04-30 14:20:23:072 284 5cc PT WARNING: ID:fd5a6897-e20b-4a8f-a118-c9c791da6851
  2012-04-30 14:20:23:072 284 5cc PT WARNING: PTError: 0x8024400d
  2012-04-30 14:20:23:072 284 5cc PT WARNING: PTError: 0x8024400d
  2012-04-30 14:20:23:150 284 72 c to THE cannot perform scan non-interactive if AU is interactive only
  2012-04-30 14:20:23:150 284 5cc Agent * found 0 updates and 17 categories of research; rules apply rated 193 on 660 deployed entities
  2012-04-30 14:20:23:150 284 5cc Agent *.
  2012-04-30 14:20:23:150 284 5cc Agent * END * Agent: finding updates [CallerId = CDM] of
  2012-04-30 14:20:23:150 284 5cc Agent *.
  2012-04-30 14:20:28:162 284 5cc report REPORT EVENT: {C7177063-6BAB-4A17-AC0B-74B0D47355FA} 2012-04-30 14:20:23:150 - 0700 1 147 101 {00000000-0000-0000-0000-000000000000} 0 0 success CDM Windows Update Client synchronization software detected 0 updates successfully.
  2012-04-30 14:20:28:162 284 5cc CWERReporter finish event management report. (00000000)