Could not import Firefox bookmarks
Using the last El Capitan (10.11.6) and Firefox 48.0.1.
I have my favorites in Firefox and want to import them into Safari.
I'm going on Safari, file / import of... / Firefox
Select bookmarks, and then click OK
It hangs for a while, and the CPU usage is 0%
However, no imported Favorites appear in Safari.
If I, instead, export as HTML in Firefox, I can import that uses the file / import of... / bookmarks HTML file.
What I don't want is the 2nd option, because she simply creates a folder of bookmarks in Safari instead of map to good equivalents of Safari (toolbar, etc.)
How can I go on Safari to recognize Firefox bookmarks in native mode?
If the problem is still there, try to boot mode safe using your usual account to see if you can import. Disconnect all devices except those necessary for the test. Shut down the computer and then put it up after a 10 second wait. Immediately after hearing the startup chime, hold down the SHIFT key and continue to hold it until the gray Apple icon and a progress bar appear. Startup is considerably slower than normal. This will reset some caches, forces a check for directory and disables all start-up and connection, among other things. When you restart normally, the initial restart may be slower than normal. If the system is operating normally, there may be 3rd party applications that pose a problem. Try to delete/disable the third-party applications after a reboot using the UN-Installer. For each disable/remove, you need to restart if you do them all at once.
Start Mode without failure-El Capitan.
If it works in safe mode, try to run this program when it is started normally, copy and paste the result in a response. The program was created by Etresoft, a regular contributor. Use please copy and paste the screenshots can be difficult to read. On the screen with the Options, please open Options and tick the boxes in the bottom 2 before the race. Click on the button "Report share" in the toolbar, select "Copy to Clipboard" and then paste into a response. This will show what is running on your computer. No personal information is shown.
Etrecheck - Information System
Tags: Mac OS & System Software
Similar Questions
-
Could not import the bookmarks file large
I recently bought another computer on Windows. I installed Firefox and tried to import my bookmarks (html) file. I could only import files into my favorites and nothing else. Then I open my file of bookmarks in Firefox and bookmarks I want are still there. The bookmarks file is 15.8 mb in size. Do I need to split this file and, if so, how could I do?
Thank you!
If you still have the old computer, you can try backup .json (using the backup instead of export). With the new system, restore the .json file.
-
Using a MacBook Pro laptop. Having read most of the help of suggestions, but still no luck
Import Firefox bookmarks. No import in file Menu bar buttonIf you export Safari bookmarks to an html file, can import you them into Firefox by using import of the 'library' bookmark import and backup menu item window?
-
How can I import Firefox bookmarks, now stored in the folder of the user on the same PC (new), in Firefox? I exported my old PC Firefox bookmarks in a folder [Windows 8] on my new PC.
When I use the ease of importing from Firefox, it will only import a bookmark at a time - and then it inserts the bookmarks all the main pages on the site marked with a bookmark, not just the one I initially put bookmark. Also, it does not matter the information stored in the bookmark tag.Sure thing.
- Open the dialog box run by pressing the Windows key by pressing R
- Type of
%appdata%
in the immediate window and press ok - Open the Mozilla folder
- Open the folder of Firefox
- Open the profiles folder
- Copy the folder that is located in this folder on a USB
- Install and run Firefox on the new computer
- Closing of Firefox
- Repeat steps 1 to 5 on the new computer
- Open the folder that you copied from your old computer
- Copy the contents of this folder into the folder inside the folder of the profile on the new computer
- Allow Windows to replace all records in doubles with those you are copying to the computer is prompted
If you have problems with these instructions, or if you would like more information, feel free to comment below.
-
Could not import the music downloaded from iTunes for Windows Movie Maker.
Could not import the music downloaded from iTunes for Windows Movie Maker. He plays in Windows Live Movie Maker and plays on my computer. Cannot find the codec. Tried the solution to this same question and in help.
HelloSome audio and video file formats are not supported in Windows Movie Maker and cannot be imported. However, if you have a video or audio file that is not taken care of, you can use a non-Microsoft video editing software to convert the file into a format supported by Windows Movie Maker, and then import the video file or an audio resulting in Windows Movie Maker. Some files also require you to install a codec before you can use the files in Windows Movie Maker.Note: The use of third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.Import video, photos and audio on Windows Movie MakerA problem of importing files into Windows Movie MakerWindows Movie Maker uses. WAV file formats and Apple's iTunes use it. AAC format.You can also try saving iTunes songs in the. WAV format instead of Mp3 format and check.For more information, see the link:Hope this information is useful. -
Cannot import songs in Windows Movie Maker, we get an error "could not import.
Original title: wrong to import the music after hard drive now
I downloaded the songs from Amazon in the past and import it onto a movie from Movie Maker without problem. I had to put in a new hard drive on my computer and now I cannot import new songs. Can I use the old songs that I downloaded (I recorded on a USB key), but when I try to add new songs I get an error message "could not import. Any ideas what I am doing wrong?
Hi SHennessey,
(1) what is the complete error message you receive?
(2) what is the format of the file?
Method 1: For files that can be imported into Windows Movie Maker, see the link below.
Can what types of files I import?
Method 2: To check your video filter settings, follow the steps mentioned below
(a) in Windows Movie Maker go to the Tools menu
(b) click on Optionsand then click the compatibility tab
Now, check if the problem persists
See the link below
Problems with importing files into Windows Movie Maker
http://Windows.Microsoft.com/en-us/Windows-Vista/problems-importing-files-into-Windows-Movie-Maker
-
Could not import title animation After effects Bridge
In Adobe Bridge, I click on an animation effect I like, and there's a window saying to burst: after effects error: could not import the random word shuffle in.ffx: unsupported file type or extension (0::1)
If anyone is familiar on how to solve the problem, it would be very useful!
Geneviève
We need the details of the version and the operating system. If you use 13.8 - do you have installed the update on 13.8.1?
After Effects 2015.3 CC (13.8.1) corrections update is now available. Creative blog Cloud by Adobe
-
Could not import raw NEF images in items 10
Can someone help me please? I have already installed an update of the plugin and restarted my computer.
I have a Nikon D 750, which had to be supported with the latest plugin download.
Melissa,
I did some googling, and it seems that your D750 needs 8.7 ACR (Adobe Camera Raw version 8.7). My camera needs ACR 8.3, but apparently 11 elements does not support this update. I have a feeling that your 10 PES is the same (no support ACR 8.7) for your camera.
So, we can:
(1) use the supplied software to Nikon for RAW files, convert to jpeg, and then open in PSE,
(2) download: free Adobe, something called a converter DNG (?) that creates a DNG file to open to post-secondary studies, or
(3) buy a newer version of elements, where the version supported with ACR IS compatible with your camera
I'm not sure 100% accuracy of this info, but so far, that's what I found. Personally, I do not have these options. I want to be able to work in PSE raw, but having to spend ANOTHER $100 or so just for this feature seems wrong.
-
I have about 400 000 pictures of so given the high number of 15 years, I had all my photos in 6 catalogues to avoid potential problems. All photos and catalogs are in a 4 TB Seagate external hard drive. I use Adobe Lightroom 5 and I use a PC with the latest Windows Office 2013.
I wanted to have a NEW catalogue of all my rated 1 star + photos of all years in a single catalog. So I created this I called Catalog + Star and told me the best option is to import a catalog at a time, and because there is no way to filter import them just photos now, I would like to import all the photos and then delete all the photos of UnStared. I did for the catalog of the year 2014, but in the end gave me the message: "lightroom could not import this catalog because of an unknown error. He had in fact imported about 40 k pictures of about 50 k total. I tried again and again and each time I end up with the same thing. I created a new another catalog and looked from scratch and the same ting happened: EXACT 40 k photos or JUST have been imported and others were not! When I imported catalog year 2013 of about 45 photos of k, it worked perfectly. But when I imported catalog year 2012 35 k photos, it's the same thing!
All the tips: 1) on how to solve this problem? and (2) if there is a way better and easier to create this main catalog of all looked at them Photos of all my catalogs?
Okay, my starting point is that LR can contain fortunately 400000 + photos, and it's a mistake to create a 1 star and catalogue as you suggest. Instead, I would recommend that you create a master catalog of all your photos, you can then question however you want - 2 stars, or a certain keyword, or with "xyz" in the title, etc.
If you are intent on going this way, you could try a slight change in what you have done so far. Instead of trying to import a complete catalogue and then delete photos of TSE, take the 2012 and 2014 catalogs and select only the photos 1 star. Then to Export in the catalog for these items and import the 2014-1star and 2012-1star in your new catalog. Can pass the problem images that I think are the problem.
If this does not work, or if you follow my initial advice, you're going to need identify the image where the failure occurs. You may have a corrupted image file, and replacement of your backup can be enough to solve the problem. Alternatively, it may be a corrupted in the catalog folder, and in this case, it may be sufficient to remove the image from the catalog and import it again. You can try to select everything in the catalog of 2014 and see if you can do an export as catalog, creating a 2014 clean and delete file previews of 2014 could also get rid of a potential problem. Another thing is to try exporting in the catalog for images 1-40000, then a second export as catalog images 40002 - 50 k.
So a few things that you need to try, rather than a magic bullet and a recommendation to change the underlying meaning.
John
-
Could not import the RAW with LR4
I have done the trial LR4... before LR3 and 1. Could not import raw with 4 files. MSG comes up saying, "After files were imported not because they cannot be read." The reason I try it is because Canon 5 d Mk III and I was told HAD to get it for the treatment of the raw with this device. Fine imports by iphoto. I must admit, though, as a dunce, this morning, I put in a new CF card and forgot to format... but I don't think it's because I tried a few weeks previously and had same problem with a card which has BEEN formatted. I had with iphoto, but they import them in a file on my desktop and then import from the desktop. Tried this time, but the import column does not appear same office option. And when I try the end of iphoto, and it arrives at its destination, I'm going under applications, and Adobe photoshop LR 4 is grey so I can't click on it to send pictures... Help! (PLEEEZZZ!) Thank you!
Oh, BTW, I downloaded DNG Converter, but have no idea how it works, don't see a help file with it, and Yes, the version of LR 4 I'm trying is 4.3.
King Tut mummy
Post edited by: mother of King Tut\
Quote 'Suite of files were not imported because they cannot be read.
Make sure you have all the permissions read and write for all locations that you are trying to import the files. (for example if you try to import/copy files to a drive/folder where you have only read access, you will get this message) I think you see this message it is because before LR can read files is they must first be written/copied to the destination.
Make sure you have full read/write access to all drives/folders, you work with.
-
Could not import any type of audio file in my project in AECS5 files
I am trying to add sound effects to an animation of titles for the first time. When I tried to import a .wav file, I got this error:
after effects error. Could not import the file (filename.wav) not taken supported filetype or extension
I have converted the file to .mp3. Still did not work. I converted the file .aiff, wma and nothing worked.
What is the problem? Better to simply animate in AE and sound effects of entry into first?
Help, please!
Z
> Why is it better to have the project files on an external drive?
It is best to have your operating system and the applications running a disc, your source media read on the other, and written to another export your files. In this way, the hard drive doesn't have to jump around to read and write from several different locations at the same time essentially.
There are many tips to improve performance here, including a response to your question about proxies.
> Can you put the link where I can dl the AE 10.0.1 update
Choose Help > updates. You should do quite often. Here is a page with the details of the recent updates.
Regarding your first question: you can't import audio files? This type of video files that you have imported successfully?
-
Could not import bookmarks of IE9 for Firefox
OS: Windows 7
From: IE9 browser
To: Firefox (version 14.0.1)When I try to import favorites of IE9, only a few folders and URLs are imported (maybe 200 to 1000) to favorite Firefox. Is there a limit on this procedure? Also, I have about 4 levels of depth of folders in my bookmarks. This could be a problem?
I appreciate any suggestions.
Fixed! Once I found the procedure below. It was easy and worked perfectly.
(I did not understand the explanation I read yesterday by someone else.)http://KB.mozillazine.org/Import_bookmarks (the link for help)
To export your IE Favorites to a file:
1. Open Internet Explorer
2. Press the "Alt" key to show the IE menu toolbar, if the menu bar is hidden (File, Edit, View, Favorites, Tools, and Help menu items).
3. In the IE menu bar, go to "File -> Import and Export..." Follow the prompts to export your IE favorites to a file, which will be named "bookmark.htm" by default. 4. After you've finished exporting your IE Favorites to a file, use the Mozilla Suite/SeaMonkey or Firefox Bookmarks Manager and import the file.
-
I accidentally replaced my backup with current bookmarks while trying to import from it. The original bookmarks were not present to Bookmark Backup in the profiles, so I used Recuva for recovering. Now, Firefox gives the "unable to process backup file" thingy.
System Restore didn't help either.
I managed to recover intact bookmarked using Recuva, deep search in the Profiles folder.
-
I just installed Firefox a second time on an OSX computer. The first time I did it, I was prompt toimport bookmarks in Safari. The problem was that I had not imported my favorites Windows in Safari and therfore did not to import. I uninstalled Firefox to allow me to import bookmarks in Safari. Now, I installed Firefox, a second time but this time I wasn't fast import Safari bookmarks. I have lloked autour among drop-down menus and preferences, but cannot find where can I import bookmarks from. What Miss me? Will I import hardcoded to copy and paste in the Finder, or is there a way to do Firefox. I will say that I have installed the Swedish Firefox version since I am Swedish. Y at - it assistance awailable?
See:
-
Could not import the 5S for macbook pro
Since the last update of my 5s, two days ago I can no longer import pictures for macbook pro.
"Pictures in the film"the ___ iphone cannot be imported because the device is locked with a password"but it is not." Can and would someone please help. "Thanks I also:" iTunes could not connect to the iphone '-iPhone "because an invalid response was received from the device.
On the phone, try pressing these buttons at the same time for at least ten seconds, until the Apple logo appear: the sleep/wake button and the Home button. On Mac, it just reboot and then try again.
Maybe you are looking for
-
Satellite A200 - how to get a new AC/DC adapter?
Hi all My AC/DC power adapter has a faulty wire. As the insulation plastic had hot real and had a light burning plastic smell. I can't get power him when the cord is in certain positions. The problem is near wher I plug it into the laptop. What can I
-
How to make the current façade, as values of standard values (in an exe file)?
There are a few posts about this, but I couldn't find a satisfactory solution to this. Just an example of what I'm looking for a solution: the fronpanel includes a digital input element. I start the VI, change the value of the element of digital inpu
-
When you use the search for a window, the files are not listed in the search index
Original title: question of Windows search When you use windows search, records that are not not in the search index are searced. Why?
-
Solutions of J611 HP 3051 icon disappeared and can not handle the Scanner
I looked for a solution online. I called HP Support and they are not helpful at ALL. I uninstalled and reinstalled the whole program by using the original CD. The HP icon shows only a few items online. There is no scan option manage AT ALL. How can
-
I'm running 32-bit Windows Vista Home Premium on a Dell Dimension E520 PC desktop with processor Pentium dual core and 3 GB of RAM. Reasonably up-to-date hardware. Well protected and all software security entirely to so far. My problem that goes from