Could not insert the voice above as WAV in Captivate 9

Similar Questions

• Could not create the voice memo

  I just got iphone 6s and restored the backup of my old iphone 4 s. any transfer of property, it works well. but when I opened the voice memo, I see this message: "unable to create the voice memo": "there was a problem creating the application resources. make room by removing existing videos from photos. I don't see any what dictaphone here and I can't make one. all of them are in my computer so it's ok, but I want to be able to make new ones.

  It looks like 30 GB free memory in my phone, so something else is wrong. I tried to sync with itunes, but it did not help.

  everybody knows what I can do to fix this?

  Try these standard troubleshooting steps.

  Reset: hold the Home and Power buttons until you see the Apple logo (10 to 20 seconds).

  If this does not help, you may need to restore your iPhone.

  https://support.Apple.com/en-us/HT204184

  If your backup in iTunes, make sure that it is an encrypted backup.

• FRM-40508: could not insert the record

  Hi guys,.
  
  I'm FRM-40508 when I press the ok button on my form.
  
  My ok button code is:
  
  BEGIN
  Do_Key ('Commit_Form');
  
  IF Form_Success THEN
  Hide_Window ('RELOAD_WINDOW');
  Go_Block ('CREATE_PLANS');
  ON THE OTHER
  RAISE Form_Trigger_Failure;
  END IF;
  END;
  
  Before going to the ok button, a when-validate-trigger fires in my block "CACHE_RELOAD".
  I launch my form in the debugger and found that there is no error in when-validate-trigger...
  
  It does not in a when-validate-trigger is:
  
  UPDATE system_parameters
  SET sysp_refdata_expires =: cache_reload.dsp_refdata_expires;
  
  But after it passes when-validate-item trigger, is faling in the trigger when-button-pressed the OK button.
  
  Strange thing, this is where he tries to update the system_parameters table, but when I check the display error in help, it shows the error:
  
  INSERT INTO SYSTEM_PARAMETERS (DSP_REFDATA_EXPIRES) VALUES (: 1).
  
  ORA-00904: invalid identifier of "DSP_REFDATA_EXPIRES".
  
  Now I'm confused why he tries to INSERT into the table of system_parameters rather than update as it appears in my query above.
  
  Why, he's trying to insert into the column dsp_refdata_expires when I am trying to update the sysp_refdata_Expires column in the system_parameters table.
  
  Table of System_parameters is not any column of dsp_refdata_expires.
  
  I ask all you form gurus for it please help me with this.

  The insert statement is generated by forms. I imagine that your block is based on a database table, and you insert new values. When you do the commit_form, this new record is sent with an insert statement in the database.
  I guess that this DSP_REFDATA_EXPIRES is not a table column.

• Could not get the toolbar above the library, develop, etc to show.

  I have a Macbook Pro and recently bought a second larger screen for development.  Everything worked great until last night.  When I open Lightroom on the big screen, I was unable to get the toolbar that allows me to bridge in Photoshop to show.  The toolbar appears on the screen of the laptop when Lightroom is open.   I googled and google and empty is come.  Abandoned in frustration thinking a stop down and opens again today would set.

  In Lightroom 5, Shift-F will switch between 3 different views, including the full screen without menus. Just press shift - f one or two times to scroll through the views in the desired.

  In Lightroom 4 or an earlier version, the shortcut was just 'f' (not the shift key).

  HD ++

• I have a 64-bit system running Windows 7. I could not get the AutoPlay to open whenever I insert a CD or a DVD.

  I have a 64-bit system running Windows 7. I could not get the AutoPlay to open every time I insert a cd or a dvd, I changed the settings to Ask Me to Windows Media Player to open with Windows Explorer... but nothing I tried introduced the feature of AutoPlay to life.

  Is there a solution

  original title: AutoPlay Windows 7

  It worked for me: I forgot where I got it, could have been here if it's a little different from what I've seen above

  PIECE AUTO REPAIR
  USING GROUP POLICY EDIT
  gpedit.msc in search
  Computer Configuration\ Administrative Templates\ Windows Windows\ Policies\ will disable Autoplay.

  In the REGEDIT HELP: Group Policy Editor is not provided with Windows Home editions, however, you can use regedit to achieve the same result.

  Open regedit and locate the following key:
  HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Policies\Explorer

  Change: NoDriveTypeAutorun to 0 x 91

  If necessary, create this key as a DWORD.

• "Setup could not read the CD you inserted, or the CD is not a valid Windows CD"

  Well, I'm going to install a Windows XP operating system. It is a upgrade disk. However, when I tried, I get error message saying:

  "Setup could not read the CD you inserted, or the CD is not a valid Windows CD", and it gives me a list of other operating systems.
  This is a new computer, so it is not any previous operating system.
  The manual says I can do a fresh install, but it allows me, I get this error message. Any ideas?

  Hi Branden,

  It is quite possible that the CD you are trying to use is corrupted. Wipe the disc with a clean cloth.

  In addition, it may be due to the fact that you are using a CD to upgrade and you are trying to do a clean install.

  ·         You have an earlier version of Windows CD?

  If so, you need to first install the previous version and then upgrade to Windows XP.

  Also, check for a similar description here.

  Not a valid Windows CD - Microsoft Answers

• I can hear a wav file, but could not get the video from my camera.

  original title: file WAV on Vista

  I can hear a wav file, but could not get the video from my camera.

  I have windows vista?

  Hello
  WAV files will be audio only.
  You can save this file as an MP4.
  B Eddie

• Could not resolve the property in a stream, or a property nested in a stream

  Hello
  
  I have a CEP of the following structure project.
  
  Entry card1-> Stream-> Processor1-> Stream2 1-> output adapter
  
  Input adapter takes in the events of type OrderLine that has lineid as one of the fields.
  
  In the processor I wrote code like
  
  Insert into OrderLine
  Select *.
  Of
  OrderLine as lineEvent
  where
  sandr.utils.ProcessorUtility.isbefore (lineEvent.requestdate, lineEvent.scheduleshipdate) = 'TRUE '.
  
  In the code above sandr.utils.ProcessorUtility.isbefore is a java method that returns a string.
  
  When I try to deploy, I get an error saying
  
  Could not resolve the property 'lineEvent.requestdate' in a stream or property nested in a stream
  
  But requestdate is a valid field of entity class OrderLine.
  
  I am not able to trace what could be the reason for this. Please help resolve this error.
  
  Thanks in advance for your time,
  Regnier
  
  Published by: Raja Kumar on April 16, 2010 04:04

  Hello

  Can you post the JAXB generated Java class code?

  Seth

• I have some problems with a ONE_TO_MANY relationship, can not insert the record

  I have some problems with a ONE_TO_MANY relationship:
  
  Imagine the following entities:
  
  -J' have an operational entity with a relationship to workers one_to_many something like:
  

  @SecondaryKey(relate = Relationship.ONE_TO_MANY,
      relatedEntity = Worker.class)
      private Set<String> workers;

  -The category of workers is a simple annotated entity.
  
  
  Now, I want to do the following and I get the error:
  
  -Create a bunch of tasks
  -Insert tasks into the entitystore
  -create a set containing all the tasks of primary key
  -involve workers to tasks
  -Insert the task in the database
  
  
  The above procedure works fine, but when I try to associate the same set of workers with another task I get an exception like:
  

  com.sleepycat.je.DatabaseException: (JE 3.3.75) Could not insert secondary key in persist#Sample#sample.Task#workers OperationStatus.KEYEXIST
          at com.sleepycat.je.SecondaryDatabase.insertKey(SecondaryDatabase.java:887)
          at com.sleepycat.je.SecondaryDatabase.updateSecondary(SecondaryDatabase.java:807)
          at com.sleepycat.je.SecondaryTrigger.databaseUpdated(SecondaryTrigger.java:42)
          at com.sleepycat.je.Database.notifyTriggers(Database.java:1735)
          at com.sleepycat.je.Cursor.putInternal(Cursor.java:1368)
          at com.sleepycat.je.Cursor.putNoOverwrite(Cursor.java:498)
          at com.sleepycat.persist.PrimaryIndex.put(PrimaryIndex.java:366)
          at com.sleepycat.persist.PrimaryIndex.put(PrimaryIndex.java:315)

  Can someone please clarify what my problem is and where I should change for this case study work?
  
  Thank you

  The above procedure works fine, but when I try to associate the same set of workers with another task I get an exception like:

  The table in this javadoc should help. Please think about whether they are 1 of many, many 1 or many is the appropriate link.

  http://www.Oracle.com/technology/documentation/Berkeley-DB/je/Java/COM/Sleepycat/persist/model/SecondaryKey.html#relate)

  -mark

• The use of the battery has increased since the update to ios 10. Also, why can not disable the voice command. It's the most boring on the new update.

  The use of the battery has increased since the update to ios 10. Also, why can not disable the voice command. It's the most boring on the new update.

  Depending on what you mean by "voice command", either:

  Settings / general / accessibility / VoiceOver / OFF, or

  Settings / Siri / OFF

  As for your use of the battery, you can check what app pulls most of its use in the settings / battery.  A new version of the app is sometimes problematic, not necessarily iOS or iPhone.  If you see a unusual % of use of a particular application, or force-to leave it removal/reinstalling it or remove it until an update comes.  If anything seems unusual, it might be a problematic installation of iOS, in which case, you could backup your iPhone and restore it:

  Restore your iPhone, iPad or iPod touch from a backup - Apple Support

• HP 4620: HP 4620 scans very well, but could not save the analysis in a file

  The scanner scans very well, but could not save the analysis in a file. Whenever I try to save, it crashes.

  Hey @motikama,

  Welcome to the Forums of HP Support!

  I see that you encounter some problems with the scanning of your Officejet 4620 e-all-in-one for your Windows 7 PC. I can help you with that.

  To start, make sure that the printer is plugged directly into a wall outlet, not a surge protector. Once done:

  1. Uninstall all software associated with the printer to your computer.
  2. Restart your PC.
  3. Download and install the latest drivers by clicking on this link.

  Please let me know the results after following the above. If you can scan, click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.

• Satellite U405 - S2833 Fingerprint error: could not open the sensor

  Hello, I am very new to the forums so I apologize in advance if I don't give all the necessary accurate information in this thread.

  I have a Toshiba U405-S2833 and it came with the TrueSuite Access Fingerprint Software.

  I downloaded an update a few days ago, but I don't remember if it's for Vista or Toshiba. Since then, my fingerprints were all removed from the system, and when I try re - save, I get this error message "error: could not open the sensor" I can't find the material to fix the sensor manually without going through the TrueSuite software.

  Any help would be greatly appreciated.
  Thanks in advance

  I am also having the same problem.

  My boss uses a Satellite U405-2628 fingerprinting and with the sensor TrueSuite Access Manager. It worked fine, then I updated windows and it has stopped working. I was on the updates and noticed an update of TrueSuite and thought that maybe that was messed up things.

  Then there were other issues that went past me locked out of the machine (anti-virus and loss of relationship with the field... also my fault). So I decided to wipe the machine and install fresh Vista.

  I installed everything but the TrueSuite software still not able to open the sensor. After hitting my head on it, I decided enough was enough and I restored it using Toshiba recovery disks.

  It took a few hours and here I am logged in as administrator and the TrueSuite software still cannot open the sensor. I don't know what I can do, since it is to return to the factory settings.

  As the above poster said, HELP!

  Thank you.

  ... a little later...

  Well, I managed to do work, and this can be useful for some people out there since I found no easy answers. I can't guarantee anything, and it's really complicated... so here go us.

  First, I downloaded the latest update from Toshiba (util_fingerprint_27460A.exe) and nothing has worked.
  Then I uninstalled the sensor since (click right, uninstalled) Device Manager to uninstall the driver as well (it should invite you to do so)
  Then, still in the Device Manager, I scanned for new hardware and it came with my sensor. I said to look for drivers and when he could not find, I think it gave me an option for windows search for an answer... or something like that. He came back with a link to Authentec (www.authentec.com/win7update/w7wbf32.exe, I think). So I downloaded that and installed. He rose through the device under "Biometric devices" then before... I think it's under the "Personall security device" or something like that. But alas, still no luck. So I uninstalled all the device from the Device Manager (taking care of uninstalling the driver as well) and of the TrueSuite software. Then came the break I was looking for.

  Online research I came across this page... http://members.driverguide.com/driver/detail.php?action=download&driverid=1194755. I had the chance before to DriverGuide.com so I thought what the heck. It is a driver of HP for the same sensor and it is dated 2006. So I downloaded and installed. Still nothing...

  Disgusted, I thought, well let's try to install util_fingerprint_27460A.exe on top of that. So I did, restarted and I couldn't believe my eyes when he said to connect and register fingerprints not seriously. And so I did. I hope this helps people, I don't really know how the sensor I so messed up, but I'm glad it worked.

  Yet one thing... and this may be important. When I took TrueSuite first after doing all this, he told me that the storage of fingerprints was full... or something in that sense. So I clicked the button remove all traces of fingers button and it I would like to register my fingerprints. I'm starting to wonder if that was all I had to do in the first place... Guess I'll never know.

  Good luck.

  Post edited by: rewind22x

• ORA-12154 tns could not resolve the specified correct identifier

  I am facing the following problem:

  labVIEW 2012 32 bits 64 bits of Windows 7, 10.2.0.1.0 oracle client (32-bit).

  I created a DSN from Data Sources (ODBC) (32-bit version of what in % windir%\syswow64\odbcad32.exe) pointing to an instance of Oracle 10 g.

  I have test the DSN in this way (IE. Data sources (ODBC) and the connection is successful (which means that the tnsnames.ora is correct).

  I use the "DB tools Open Connection.vi" in order to get connected to this database, passing as parameters the DSN above, the user name and password.

  I get the error:

  ADO error: 0x80040E4D
  Exception occurred in the Microsoft OLE DB provider for ODBC drivers:

  [Oracle] [ODBC] [Ora] ORA-12154: TNS could not resolve the specified correct identifier

  all will help much appreciated

  Thanks in advance

  Hello everyone.

  I already solved the problem (work until late Saturday).

  the solution was to install the latest version of the Oracle customer, namely: Oracle 11 g Release 2 CLIENT for Windows 32 (11.2.0.1.0).

  Now everything works OK.

  I also tested in Windows 7 32 bit (the .vi even and the same Oracle client). This will also OK.

  Thans a lot.

• Could not create the work file. Check the temp environment

  After I did my Vista SP2 update, the only thing I could do was to reformat the HD. After all, including Office 2007 reloading, Outlook and work has worked well. Again, I went through the updates, Vista and Office SP 2 and now in Outlook and Word I get this error message Outlook (Word) could not create the work file. Check the temp environment

  variable. I am alos having other problems in Word. Help, I can't find all the answers!

  Follow the steps below at our own risk.  Set a restore point before doing this. Make a mistake in the registry can have bad results

  In your registry HKEY_CURRENT_USER\Software\Microsoft\Windows\Current Version\Explorer\User Shell Folders\Cache Database Cache data value must be %USERPROFILE%\Local Settings\Temporary Internet Files

  Close all programs. Then in the registry editor, once you get in the folder above, right click on "Cache", make a left-click on "Change", paste in "%USERPROFILE%\Local Settings\Temporary Internet Files" (without the quotes), on the left, click 'Ok' close the editor of the register. Restart the PC.

  This should solve your problem.

  - Http://blogs.msdn.com/powlo/archive/2007/01/01/fix-for-error-outlook-could-not-create-the-work-file.aspx

  a. start-> Run-> enter "regedit" and press "Enter" to run the program to change registry variables.

  b. navigate to the folder-> "HKEY_CURRENT_USER\Software\Microsoft\Windows\Current Version\Explorer\User Shell Folders\Cache"

  c. check the values of variables [for everything in the "User Shell Folders" folder] - all the variable should have values from '% USERPROFILE%\ '. ». Any variable that is not of this starting point is probably damaged. In my case, all variables corrupt has been a correspondent of "Backup_VariableName". Example: my variable "cache" was damaged when there is a variable called 'backup_cache' with the correct values

  d. change the value of variables corrupt to correct the values. Example of change variable value "cache" in "%USERPROFILE%\Local Settings\Temporary Internet Files" and so on.

  e. close all of Ms Office programs, and turn. The problem should be solved now.

  I added the text in square brackets [] above.

  Microsoft partner - "gentlemen, you can't fight in here! This is the war room. »

• Outlook Express 6: could not resolve the name of the beneficiary - abandoned user command

  original title: could not resolve the name of the beneficiary - abandoned user command

  When trying to send outside of Outlook Express 6 (right click, send to or by clicking on a hyperlink email), the above message appears.

  I lived http://support.microsoft.com/kb/2398839 with nothing next set-by-step does not.
  Any idea?

  AVG is known to cause problems with OE.  One thing that must be done is to ensure that is NOT set to scan the mail.  I know that the only way in the past to avoid this problem is to uninstall AVG and then reinstall it with the email Scanner option is disabled.  I don't understand what else could be blocking, unless it is another program running in the background.  I have recently spent 6 hours trying to resolve a problem where a program installed on a computer just wouldn't work, and I tested it on another computer and it worked fine.  I turned off and installed in safemode, and he still wouldn't run on this computer.  I told my friend that computer, it is that the only thing left that I could think of to try to uninstall the anti-virus software (which will move without a name) and see if it would make a difference (I had already turned off all its services) and of course the program executed instantly as soon as the machine was gone.  So I put MSE (www.microsoft.com/security_essentials/) about it, and gave it to my friend.  The moral of this story is that the running software can interact with windows to break and sometimes the only way to identify the culprit is to get rid of all works we can imagine.

  That said, I can't really fault necessarily on dysfunction something else installed on your computer, but if you went through all the hoops and it still doesn't, which suggests a background process running blocking things.  It is in any case my point of view on this.

  Another thing.  Under this key:

  HKEY_CLASSES_ROOT\mailto

  the hull | Open | order value must indicate:

  /Mailurl:%1 "%ProgramFiles%\Outlook Express\msimn.exe".

  but it is probably already.

  Steve