Could not load any Windows OS on ESX 3.5

Similar Questions

• When I try to use the parental controls, I tells me that this page could not load any ideas

  When I try to use the parental controls, I tells me that this page could not load any ideas

  Hello

  Since when are you facing this problem?

  If it worked before, then do a system restore to restore the computer to an earlier point in time before the problem started.

  See these articles for help:
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-system-restore
  http://Windows.Microsoft.com/en-us/Windows-Vista/system-restore-frequently-asked-questions

  Kind regards
  Afzal Taher
  Microsoft technical support engineer

• Could not load any websites. I don't get any 'error message', the 'enter' key has no effect in the address bar. Works fine in FF and IE search box.

  Entering a URL in the address bar and pressing on enter does nothing. Or the 'enter' key or 'address arrow bar', to go to the site function. Web site does not load and no error message appears. 'Enter' key works very well in the FF and IE search box, is not my keyboard.

   Tried most of the recommended fixes under the "Error loading websites" article with the exception of "DNS refetching", as typing "about:config" in the location bar does no good as the "enter button" won't function. I've removed and re-added FF back into the windows firewall, removed ZoneAlarm from my system, edited proxy settings, deleted and reinstalled FF several times. NOTHING WORKS!!! I'm a die hard FF fan and this is KILLING me. Please HELP!!!
  

  Start Firefox in Firefox to solve the issues in Safe Mode to check if one of the extensions or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > appearance/themes).

  • Makes no changes on the start safe mode window.
  • https://support.Mozilla.com/kb/safe+mode

• Want x 360 m6 w103dx: could not load on Windows 7 x 64 usb drivers

  I have a HP Envy laptop 360 m6 x. It came with 10 Windows installed which I don't want to keep, so I installed Windows 7 x 64 in a space different than HD, and not all that I'm fine. After understand I had to DISABLE Wecure Boot, I installed Windows 7, and most everything OK, except Windows 7 on this desire x 360 does not recognize my USB ports. I tried looking for the HP sites for chipsets and usb drivers but none will allow me to install them on the Windows 7 operating system. Other sites have said I can't install Windows 7 on this laptop, but it's not true, just that I can not load the USB drivers for it.

  Is this possible?

  Thank you

  Ed

  Hi, Ed:

  Try the USB3 directly from Intel driver.

  Download, unzip and run the setup.exe file...

  https://Downloadcenter.Intel.com/download/22824/USB-3-0-driver-Intel-USB-3-0-Extensible-host-controller-driver-for-Intel-8-9-100-series-and-C220-C610-chipset-family

• HP Pavilion dv9330us STOP: 0 X 00000116 (0X872C4AB0, 0X8A9C30, 0x00000000, 0x00000002)... Could not load even windows in safe mode after full system restore.

  I have a Pavillion dv9330us laptop.  My computer crashed after an update has been installed automatically.  I did a complete system restore.  After completing the restoration I was downloading all updates.  after SP2 updates are available.  The computer crashed again after the installation of one of the most recent updates.  The update was probably an update of graphs, I have done research.  Now my computer does not load windows.  I get the BSOD and cannot access the windows at all, not even in safe mode.  I can't do anything for drivers or anything else because I can't even access my computer in cmd mode.  The error code is STOP: 0 X 00000116 (0X872C4AB0, 0X8A9C30, 0x00000000, 0x00000002)...

  NVLDDMKM. SYS - address 8A9C30 base at 8A9C0000, DateStamp 4578eca9

  Help, please... HP says they can do a refurb more money that the laptop is worth.

  Hi Volatus,

  I would say lets you do a system restore using the Windows Vista DVD to one hour before the update that has the problem of the installation and check if you are able to boot.

  What are the system recovery options in Windows Vista?

  I hope this helps.

• Canon MP620 install launches the error message "Could not load any file of resource".

  I reinstalled Windows XP on a fresh partition a few days previously.  I applied SP3 and all updates of windows until no updates are available.  I applied the motherboard and video drivers & s/w.  Windows updates applied an update to the CPU driver, if I'm not mistaken.  I didn't have many other things still installed at this point beyond Panda, office and a few utilities simple, affluent (Notepad ++, Total Commander, etc - things without installs pretty simple).

  When I try to install the printer driver Canon MP620 (md8l-victory-mp620-1_04 - ea24a.exe, for use on local network), after the one the switch over and half dozen clicks later software is about to install but then get the following error:

  INSTALLATION PROGRAM. EXE

  Unable to load a resource file.

  I contacted Canon support.  Not surprisingly, they said it wasn't their problem and that my system was to blame.  To be honest, I was able to run the same configuration file, without getting that error, on another machine.

  ... Any other relevant details of the _potentially_...

  I already had a problem with es.dll (do not have the details on me).  I got an error message (twice) which suggests that it might be corrupted, so I ran sfc/scannow.  After clicking on several attempts on my original Windows XP disc in the analysis, it finally finished without reporting problems or corrective action.  Never seen the error once again since.

  ... then...

  I can't find all the other tracks on the internet that take me somewhere.  I used to be quite a geek, but I think that I'm not dumber as I get older.  Without a solution, I can't use this printer.  I need to use it as both a printer and a scanner, so I would use Canon software provided.  Can anyone suggest it please what else I should try?

  Other details which may be relevant:

  -Windows XP Professional Service Pack 3 (build 2600); the system is up to date with windows updates

  -You try to run md8l-victory-mp620-1_04 - ea24a.exe (network for printer Canon MP620 multifunction driver) downloaded fromhttp://www.canon.ca/inetCA/serviceDetail?m=load&id=5&sid=27&mid=0002200452&type=D&opt=1

  -I have not found a driver for Canon in the 'Add printer' wizard standard who recognized the printer.

  Hello

  ·        What version of the XP operating system do you use? 32-bit or 64-bit?

  I suggest trying to install the printer using the wizard for adding and deleting printer and check if you are able to install the printer on the system or not.

  What Add Printer Wizard does not complete the installation of your printer

  http://support.Microsoft.com/kb/823447

  It could be that an application is in conflict with the installer. I suggest to perform a clean boot on the system, then try to load the drivers from the printer and check if the problem is resolved.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Note: I suggest you uninstall the drivers that are already present on the system and the installation of new drivers on the system from the link below.

  http://www.USA.Canon.com/Cusa/support/consumer/printers_multifunction/pixma_mp_series/pixma_mp620#DriversAndSoftware

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• scanner of foto G3110 scanner could not load on windows 7 OS

  Mr President.

  I had XP Professional as the operating system on my computer.  Recently, I upgraded my OS to Windows 7 Professional.  I have scanner HP Scanjet G 3110 version 11.5.  Now, I want to load the solfatware referred to above on my cumputer, but failed.

  Please advise.

  With respect,

  Inderjeet Singh

  Mr President.

  I had XP OX on my laptop HP dv Clubhouse 2000.  Now, I've updated for win 7 Professional dow.  I am unable

  Download from the software CD for scanner 3110 G on my system.

  Please advise.

  Inderjeet Singh

• Could not load the Windows wireless service

  When finished the windows startup, it cannot load the service windows wireless. Then I run repair and solve the problem until I turn off the phone or appears the same problem and so on...

  Hi Gustavo,

  Are a. When you facing this problem?

  B. you get errors?

  C. you are able to connect using the wired connection?

  Try the suggestions in the article below.
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-finding-wireless-networks

  If the problem persists, you will need to uninstall the network driver and restart the computer for the generic drivers loaded on the computer.

  1. click on Start

  2 type devmgmt.msc in the start search box and press on enter.

  3. right click on the network driver and choose Uninstall.

  4 restart the computer and check the status.

  Previous post: the result.

  Bindu S - Microsoft Support

  [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

• BlackBerry Bold 9000 Blackberry Smartphones - could not load any software and unable to use the phone

  Hello

  I have a blackberry bold 9000 and has been updated from the last app on this subject yesterday. Due to the low battrey my laptop turns off until the software has been installed to prperly. I tried the following:

  (1) to take the battrey and turn on the phone and tried to load the software again but that doesn't seem to work because the software does not recognize my phone it says unknown device.

  (2) I tried to use the option of updating the Web site, but also, which doesn't seem to work

  The display shows the following message appears when turned on.

  The application's permissions:

  The driving security application tries to access the information from the phone. I can't move the trackball on the appropriate option.

  Not really sure if there is a way to solve this problem.

  Help will be very appreciated. Thanks in advance.

  Concerning

  Ashish

  (1) make sure that you have Blackberry Desktop Manager installed.
  http://NA.BlackBerry.com/eng/services/desktop/
  (2) on your PC, go to start > run and copy and paste the following line exactly (i.e. with quotation marks):

  'c:\program files\common research in motion\apploader\loader.exe' /nojvm

  (3) the Application Loader Wizard will appear - click on "next".
  (4) in the ' connection: ' drop-down menu, you should see "USB - PIN: UNKNOWN". Click on the button "next".
  (5) you should see a list of applications ready to be installed for your Blackberry. Press Next and finish, and that you are well on your way to get your Blackberry to life.

  Just unplug and let the process finish completely.

  NOTE: If you do not display the list of applications mentioned in step 5 and instead to see the message "the Blackberry Desktop Software has no Blackberry Device Software for the device you have connected to the computer. Contact your wireless service provider or system administrator', then you must download the Blackberry operating system for your support and your device.
  http://www.BlackBerryFAQ.com/index.php/BlackBerry_Operating_System_Downloads
  Just select the appropriate type of carrier and network, select your Blackberry model from the list and download the latest version. Install this download and follow the steps above again and you should be on the right track.

• Windows could not load the profile of the user

  When I start my PC, is to show the windows user environment could not load the profile of the user, but you connected on default profile for details of the corrupted system registry.

  Please reply me with the solution that I use win xp sp2

  Hi citycc,

  1. did you of recent changes on the computer?

  2 when was the last time it was working fine?

  3. are you able to connect to Windows?

  4. how many accounts do you have on the computer?

  See the Microsoft article below and check if it helps.

  Error message "Windows cannot load your profile because it may be corrupted" when you try to log on Windows XP

  http://support.Microsoft.com/kb/318011

• SE error message: user account Service failed to connect. Windows could not load user data while trying to connect to windows

  Original title: I can't access my user account

  I went to to connect my user on my laptop and a message popped up saying the service user account Service failed to connect.

  Windows could not load user data.

  Someone please help!

  Hi tozza92,

  1. you remember to make changes to the computer before this problem?

  2. are you able to connect by using a different account?

  You can consult the following Microsoft KB article and check if it helps to solve the problem:

  Error message when you log a computer Windows Vista-based or Windows 7 by using a temporary profile: "the user profile Service has no logon. Unable to load the user profile.

  http://support.Microsoft.com/kb/947215

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Backup files Vista - "Windows could not find any backup sets [file path]."

  I have a Vista computer.  The hard drive broke so until I replaced it I backed up all the files on the computer to another computer running Windows 7. I did it in the backup and Restore Center.  I made a backup of files, not a full backup of the system (I've seen the full backup of the system mentioned in other posts, but that was not an option... maybe which is only available on Vista Premium).  In any case, I replaced the hard drive and then try to restore the files, but I get the message "Windows could not find any backup sets [file path]."  Anyone have any ideas?  Thank you.

  Here is an article on the restore procedure:http://www.vista4beginners.com/How-to-restore-files to make sure you do this right.  It's a selective restore of a full or selective backup (not a full restore from a full backup) - but since you did a full backup, it matches your process more closely than would a full restore.

  Here is an article on the advanced use of restoration (during normal restore does not work):http://www.mayankraichura.com/post/2009/08/06/Avdvanced-Restore-via-Windows-Vista-Backup-and-Restore-Center.aspx.

  Restore files from a backup
  http://Windows.Microsoft.com/en-us/Windows-Vista/restore-files-from-a-backup

  Back up and restore: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-and-restore-frequently-asked-questions

  I also found the following (but don't know if it of true or not):

  1. after the start of "backup and Restore Center."

  2. I chose "Advanced Restore"

  3. I was did not an administrator password... maybe because my account is an administrator account.

  4 choose "files from a backup made on a different computer.

  5. in the dialog box indicating "Select the location of the backup to restore", select "hard drive, CD or DVD...". »

  6. under the drop-down list box, select your drive/partition and continue

  7. If all the backups on your drive, it will show a list of them.

  8. in my case, he showed a backup, but in the backup location, it will show "backup location is not available."

  9. I was frustrated, but then I somehow just select this backup (Yes... even if he said that thebackup location is not available " ")

  10. and you press "next".

  11 guess what... no error!

  12. a window appeared asking me if I wanted to do a full restore, or I want to select specific folders or files.

  13. I selected the folders I wanted to restore and bingo... it their restored smoothly.

  14. so that the next time see a mistake, try to continue with him... ;)

  I don't know if this will help, but it does not provide much information about the process (when it works).  I hope you find any error or discrepancy in your procedure and it will clear up and allow you to restore.

  I hope this helps.

  Good luck!
  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• How to access the USB secure key on windows vista, I get the message that application 10004 could not find any JumpDrive Secure device connected to your system

  Original title: how access key USB secure Windows vista

  I have a lexar player sure to jump that I used with an old computer that has Windows XP.  I now have a new computer with Windows Vista and I can't access the secure part of the USB key.  When I try to access the part secure the USB key I have the following message "Application [-10004] could not find any JumpDrive Secure device connected to your system. Please make sure that your JumpDrive Secure device is inserted into a USB port".

  Of course, the USB key is inserted into the USB port.  If anyone can help find me a way to access the part secure the USB key I would appreciate it.  Thank you.

  Hi Jon0909,

  The error that you received can be for several reasons. I suggest you try the following steps:

  Method 1: Run the fixit available in the link below and check if that makes a difference

  Tips for solving problems of USB devices

  Method 2: This normal matter as a result of a conflict between the USB and other USB (Universal Serial Bus) connected to the computer.

  (a) disconnect all the external devices connected to the computer to expect the mouse and keyboard, check if your USB key works.

  (b) If this solves the problem, and then add back both devices until you discover the piece of hardware causing the issue.

  If the problem persists, you can contact the manufacturer of the device for any known issues
  http://www.Lexar.com/support

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer
  ---------------------------------------------------------------------------------------------------------
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows could not load the backup selected for the following reasons

  I'm having a problem, try to restore a backup set

  A failure of HD I had to wipe my computer.

  Now I'm tyring to restore and it doesn't give me the error on the title of this thread with 0x810000E3 error code

  I have windows vista Home premium

  I can see the ZIP files on my external USB hard drive, but when I double click using windows compress or winzip files are not open.

  I tried the restore (basic and advanced) the windows backup and restore program nothing works.

  I have crucial information on this drive I need to recover.

  Any information is greatly appreciated.

  Thank you

  I could not find any information on this specific error code - so it will have to address the situation in a generic way.

  Here is an article on the restore procedure: http://www.vista4beginners.com/How-to-restore-files to make sure you do this right.  It's a selective restore of a full or selective backup (not a full restore from a full backup) - but since you did a full backup, it matches your process more closely than would a full restore.

  This is a GREAT article on the backup and restore processes in Vista http://technet.microsoft.com/en-us/magazine/2007.09.backup.aspx , but he won't go into detail about the restoration process - considering almost as easy, of course.  But it teaches you a lot about what is possible and how to do it.

  Here is an article on the advanced use of restoration (during normal restore does not work): http://www.mayankraichura.com/post/2009/08/06/Avdvanced-Restore-via-Windows-Vista-Backup-and-Restore-Center.aspx.

  I also found the following (but don't know if it of true or not):

  1. after the start of "backup and Restore Center."

  2. I chose "Advanced Restore"

  3. I was did not an administrator password... maybe because my account is an administrator account.

  4 choose "files from a backup made on a different computer.

  5. in the dialog box indicating "Select the location of the backup to restore", select "hard drive, CD or DVD...". »

  6. under the drop-down list box, select your drive/partition and continue

  7. If all the backups on your drive, it will show a list of them.

  8. in my case, he showed a backup, but in the backup location, it will show "backup location is not available."

  9. I was frustrated, but then I somehow just select this backup (Yes... even if he said that the backup location is not available " ")

  10. and you press "next".

  11 guess what... no error!

  12. a window appeared asking me if I wanted to do a full restore, or I want to select specific folders or files.

  13. I selected the folders I wanted to restore and bingo... it their restored smoothly.

  14. so that the next time see a mistake, try to continue with him... ;)

  I don't know if this will help, but it does not provide much information about the process (when it works).  I hope you find any error or discrepancy in your procedure and it will clear up and allow you to restore.

  I hope this helps.

  Good luck! Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• I could not find download Windows Mobile Device Center 6.1 so I can download pic & videos from my phone to my computer. I need assistance with their phone is off and on computer any ideas please help.

  I could not find download Windows Mobile Device Center 6.1 so I can download pic & videos from my phone to my computer. I need assistance with their phone is off and on computer any ideas please help.

  See http://support.microsoft.com/kb/931937