Windows could not load the backup selected for the following reasons

Similar Questions

• Windows could not load the profile of the user

  When I start my PC, is to show the windows user environment could not load the profile of the user, but you connected on default profile for details of the corrupted system registry.

  Please reply me with the solution that I use win xp sp2

  Hi citycc,

  1. did you of recent changes on the computer?

  2 when was the last time it was working fine?

  3. are you able to connect to Windows?

  4. how many accounts do you have on the computer?

  See the Microsoft article below and check if it helps.

  Error message "Windows cannot load your profile because it may be corrupted" when you try to log on Windows XP

  http://support.Microsoft.com/kb/318011

• Windows could not load the NLS being missing or corrupt data.

  I reinstalled Windows Vista 32 bit on my laptop Gateway using the OEM install cd that comes with it, but now, when I boot, I have the following window:

  Windows Boot Manager

  Windows could not start. A recent hardware or software change might be the cause. To resolve this problem:
  1. Insert your Windows installation disc and restart your computer.
  2. choose your language settings, and then click "next".
  3. click on "Repair your computer."

  If you do not have the disk, contact your system administrator or computer manufacturer for assistance.

  Status: 0xc000000f
  Info: Windows failed to load the NLS being missing or corrupt data.

  Reading a similar post, I tried kites 3 methods of WinRE (Startup Repair, Bootrec /RebuildBcd, System Recovery) but they didn't work. I ran the WinRE Windows memory diagnostic tool and no error on my hard drive.

  I went to the gateway support site & also tried to access the recovery partition by pressing ALT + F10 to reboot, but it didn't work either. I tried pressing F8 safe mode, but I don't have the option "Repair your computer" that would have gotten me in the window of the gateway recovery management. I can't get in either safe mode, load a list of files and stops on Loaded: \Windows\system32\drivers\crcdisk.sys, then the message Windows Boot Manager window reappears again (see above).

  Reading another post, perhaps to copy files .nls of my installation on my hard drive cd would do the trick, but I don't know how to do this. I need the old data, I want to just my laptop to boot and run without having to buy a new hard drive.

  Thanks in advance for your help.

  Here is an answer I've found: http://www.eggheadcafe.com/software/aspnet/34039669/nls-data-is-missing--cannot-repair.aspx of Gary Velvet:

  I set up an instance of Vista virtual machine and copied since all the
  *.nls in/Windows/System32 files and all *.fon files of the
  Windows/Fonts.  I then put on a USB key and inserted in
  the breakage of the machine.

  I didn't know that this WindowsRE could read USB drives. It does things
  easier. I then crushed the files on the area damaged with those of the
  clean installation and a reboot took me directly in Vista.

  If may also be possible to copy corrupted files of a true Vista Installation DiskLhttp://www.vistax64.com/tutorials/261616-extract-files-vista-installation-dvd.html.

  To find out which kid are corrupt, we need to run a program to find the corrupted system files. If you use the drive, go to the prompt controls and cd to C:\Windows\System32. Type sfc/scannow, go and let it run.  It will scan and try to correct some of your system files.  If all goes well he comes complete with no corruption, it could not repair (if it has these post of corruption here or try to analyze it to find the problem or files usinghttp://support.microsoft.com/kb/928228.  Try to put all the files corrupt here so that we can see if they can be repaired with good copies of the installation disc if we can identify those who go there where replace them correctly.

  Let's see how these options work before considering anything else.

  I hope this helps.  Keep me in the loop.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Windows could not load the installer for the display

  Whenever I try to open the NVIDIA settings, it gives me the error message "Windows has no load installer for display. I did what some post said and went to the Device Manager and tried to find the graphics card. To realize that I could not find them. Then I went down to the unknown tab and there was my NVIDIA GeForce video card, so when I try to update my drivers, it gives me this error even. Help! D:

  Do you have downloaded screensavers, etc...

  1) click on 'Start' > select 'Control panel' > double-click "Add Hardware".
  Select ' Yes, "I have already connected the hardware" > click "next".
  Find and click on your device and click "next".
  If a driver is necessary, it should have with your hard drive.
  You can select "Disk" and load the driver from there.
   
  If successful, go no further
   
  (2) when you install new video drivers
  Uninstall the old ones
  Restart in vga mode
  disable a / v
  Install new drivers
  Reset
   
  If successful, no further
   
  (3) search for "desk.cpl" in the cache c:\windows\system32\dll and copy it to system32.
  Retry installation
   

• Windows could not load the installer of the image. Help please!

  My HP4010 scanner has stopped working. I tried to reload the software, but now get message ' windows has no load installer for the image. I have uninstalled and reinstalled the HP software and tried as far as I know. I downloaded the latest HP drivers but no change. I should be grateful if you would help.

  Thank you

  John

  Hello

  Step 1: This could also be a problem with the driver. I suggest you to install the right driver for your scanner from the manufacturer's Web site and check if it works very well.

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  Step 2: Install the latest version of DirectX on your computer.

  Reinstall the latest version of Microsoft DirectX. For more information about troubleshooting and installing DirectX click the numbers below to view the articles in the Microsoft Knowledge Base:
  (http://support.microsoft.com/kb/179113/ ) How to download and install DirectX

  (http://support.microsoft.com/kb/157730/ ) How to determine the version of DirectX using the DirectX Diagnostic tool

  Step 3: You can also delete the upper and lower of your registry filters and check if it works.

  WARNING:

  Change the settings of the REGISTRY can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the REGISTRY settings configuration can be solved. Changes to these settings are at your own risk.

  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-the-registry

  a. Click Start and then click all programs.

  b. click Accessories and then click Run.

  c. type regedit and then click OK.

  d. If you are prompted for an administrator password or a confirmation, type the password, or click on allow.

  e. in the navigation pane, locate and then click the registry key under:

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  f. in the right pane, click UpperFilters.

  Note You can also see an UpperFilters.bak registry entry. You don't have to delete this entry. Click UpperFilters. If you do not see the UpperFilters registry entry, you may still have to delete the LowerFilters registry entry. To do this, go to step i.

  g. in the Edit menu, click on delete.

  h. When you are prompted to confirm the deletion, click Yes.

  i. in the right pane, click LowerFilters.

  j. in the Edit menu, click on delete.

  k. When you are prompted to confirm the deletion, click Yes.

  Exit Registry Editor.

  Mr., restart the computer.

• Windows could not load the installer for wpd

  Hello

  Load Windows XP Pro on an Acer Aspire 9410.

  I received the above error code.

  Unit boots to the desktop. After a few minutes, I get the blue screen of death. The error report is damaged.

  All ideas

  John

  XP forums:

  http://social.answers.Microsoft.com/forums/en-us/category/WindowsXP

  Link above is for XP Forums.

  There is a list of the different Forums XP to the link above to help you.

  You get the help you need there.

  Here is the Vista Forums.

  See you soon

  Mick Murphy - Microsoft partner

• Windows could not load the kernel mode driver service

  How can I fix the service of kernel mode driver

  Hi danielh818,

  1. are you able to log on to the office after receiving the error message? (Without the error message)

  This error could be related to one of the pilots is not able to load. It could be related to the graphics card driver or any other driver.

  You can try to start in safe mode and check if the problem occurs or not.

  Check out the link for more information on starting your computer in SafeMode below:

  http://support.Microsoft.com/kb/315222

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• suddenly, when starting InDesign, I got this window: "could not load the Indesign because it requires Layout UI.please install available to the interface plugin user and restart InDesign.» I tried to reinstall, it did not help. I use CS4 on PC windos 7. a

  

  Finaly

  I copied the plugin: layout of the user interface of another PC and pasted into my PC to: c: Program Files (x 86) \Adobe\Adobe InDesign CS4\Required

  and ii work!

• Error: "Windows could not update the configuration to start the computer. Installation cannot move forward"during the installation of Windows 8 64-bit OEM System Builder on Macbook Pro for help using Boot Camp

  Hello

  I have a brand new Macbook pro and I bought the OEM System Builder of 64-bit Windows 8 driver in a store. My problem is that I have not only not able to install it using Boot Camp. At the end of the installation, a message appears with the following text "Windows could not update the configuration to start the computer. Installation cannot continue.

  I'm not really a tech guy but I also tried to download virtual box and the same error comes back.

  Can someone help me please?

  Thank you!

  Original title: Windows 8 64-bit English OEM System Builder

  The thread is old now, but it is for those who always have this problem.

  When I got the error, I cancelled and restarted the machine. I pressed the 'option' button when starting upwards and he grew the boot partitions. You should see a 'EFI Boot' partition. Choose that and you restart the installation process, but this time it works.

  Supposedly the boot EFI and WinInstall partition should do the same thing. Manually, select one or the other.

• Message says: "Windows could not load correctly" then he got the error: "0xa0000001.

  So I recently got these computer errors on my laptop. The pixels on the screen start to panic and it still restarts my computer.

  The first time, he started was when I was playing a game called League of Legends and it worked perfectly fine on my laptop, and he had always run around 70 fps. I played this game for a long time. Then, in the middle of an online game the screen flipped out and restarted my PC! He sent me a message saying: "your PC has encountered a problem :(. "

  After it restarts my laptop and then after restarting the pixels on the screen start to panic again and it restarted. After that restart again once he sent me a message saying he will "fix the problem on my PC. I clicked on 'Repair' and then it restarted again. After the restart he freaked out again and then it restarted and it gave me a message saying "your PC will convert at an early stage when it doesn't have this problem. This can remove files that have been installed recently. So, I allowed it do and after 3 hours of waiting he brought me to an earlier stage if my laptop was not the problem. He only come back in a few hours. Then the next day, I decided to try again in League of Legends, it was working fine and it launched the game. I was running on my normal fps then he started trolling and it fell to 12 frames per second and the screen flipped out again and then my computer restarted. Once restarted, it it worked fine after 5 minutes it restarted again, and then he gave me a message saying: "Windows could not load correctly" then he said I got the error: "0xa0000001. I turned on my PC and my screen has panic when he started, and then it restarted again give the same message and tell you have the error: 'DRIVER_OVERRAN_STACK_BUFFER '. It came on again and it was worse still panic then it restarted and it gave me the same message saying that you have the error: "BAD_POOL_HEADER". It restarts and several times with lit the screen always freak out so I decided to just remove the plug and ask for help. I went on the computer of my brother and sought a solution for these errors. Turns out Im not the only one to these errors. They say that '0xa0000001' error is caused primarily by an AMD graphics card and my graphics card is an AMD graphics card. The solution for this error is to uninstall the graphics card and reinstall it directly from the manufacturer's website. I could have made this solution and corrected my graphics card, but there is a problem. Whenever I turn on my laptop the pixels panic and sometimes the screen turns black and then it restarts. I can't access anything whatsoever, and he keeps just restarting. Please help me and tell me how to fix my phone :( I really need a solution to this problem.

  Please answer quickly :(

  Thank you

  There is an old saying that if it ain't broke, don't fix it.

  It works again.

  Read this information

  You need to get the Driver of your laptop computer software or a hardware manufacturer, not through Windows Update (with the exception of Microsoft put updated material), as Microsoft normally does nor those have the most recent drivers available as Microsoft leverages the hardware manufacturer 3rd party to provide them.

  Go to the website for your laptop or manufacturing equipment > Driver and Software Support Section > search your laptop or material style number > then your operating system > locate the correct drivers > download and install.

  ______________________________________________________

  But this is no guarantee that this won't happen again.

  Also, it would be that the game hardware requirements are higher than supports the hardware in your laptop.

  It could also be due to lack of graphic material.

  All you can do is search for the latest drivers and play games that require only a material that has your Lapyop.

  See you soon.

• Could not load the navigation for subject area? What does this error mean

  When I run the overall consistency check in my RPD. I get this error.
  Could not load the navigation for the business area.
  Source of the dimensional table has no column mapping.
  -What it means and how should I solve this problem?

  Hi friend

  Check if you have correctly joined on LTS (joins between the source tables: facts and dimensions). If you do not have joins on LTS you must create it.

  And also check if the BMML table columns are mapped to the correct table (propierties of each source table and select the tab "column mapping").

  Kind regards.

  Published by: Hammett81 on December 3, 2010 10:10

• Problems installing drivers for printer EPSON L110. Error message "Windows could not determine the language to use for the installation: CODE of ERROR: 0x80004005.»

  Original title: trouble installing the drivers for my printer.

  Hello

  I am trying to install an EPSON L110 and eveytime I try to run the CD, it appears this error message.

  Windows could not determine the language to use for the installation: CODE of ERROR: 0x80004005.

  I have windows 7 32 bit OS. What I'm doing. A quick response will be very useful.

  TKS

  Gerard

  Hi, Germain,.

  This problem could occur due to corrupted files. We will try to download and install the latest printer driver on the site of the manufacturer of the printer. Check if it helps.

  http://www.Epson.co.in/epson_india/ink_tank_system_printers/product.page?product_name=Epson_L110&tab_index=4

  See the articles for more information.

  Install a printer

  Find and install printer drivers in Windows 7

  Hope this information helps. Answer the post with an up-to-date issue report to help you further.

• Windows could not start the IKE and Authip IPsec keying service modules on the local computer. Error 1075 the dependency service does not exist or has been marked for deletion.

  Hi, I'm trying start the IKE and AUTHOP service from the SERVICES screen but I get this error:

  Windows could not start the IKE and Authip IPsec keying service modules on the local computer.  Error 1075 the dependency service does not exist or has been marked for deletion.

  original title: ike and authip error 1075 the dependency service does not exist or has been marked for deletion

  Hello

  Remember to make changes to the computer before the show?

  You can follow the below methods:

  Method 1: Restart Windows and try to start the Security Center service.

  If you still receive the same error, make sure that the WMI service is launched and running:

  (a) click Start, run , and then type Services.msc

  (b) double-click Windows Management Instrumentation

  (c) set its startup type to Automatic

  (d) click Start to start the service, and then click OK

  (e) restart Windows.

  Method 2: Restart the service

  Windows logs an error if the service IKE and AuthIP IPsec Keying Modules or the driver does not start, or suddenly, they end.

  To restart the IKE and AuthIP IPsec Keying Modules service:

  To perform this procedure, you must have membership in the local Administrators group, or must you have been delegated the appropriate authority.

  (a) restart the service. You can do this from a command prompt or in the snap-snap-in Services Microsoft Management Console (MMC). Do one of the following:

  ·         Start an administrative command prompt. Click Start, click principally made programs, Accessories, right-click guest, and then click run as administrator. At the command prompt, run the command net start ikeext.

  ·         Click Start, type services.msc in the Search box and press ENTER. In the column name of the Services snap-in, right-click on IKE and AuthIP IPsec Keying Modulesand then click Start.

  (b) if the attempt to restart the service fails, restart the computer. This forces all related and dependent services to restart.

  (c) if the error persists after restarting the computer, then the executable files for the driver or service may be damaged, and the operating system must be reinstalled.

  Note:

  You can check that the IKE and AuthIP IPsec Keying Modules (IKEEXT) service runs by using the Component Services Microsoft Management Console (MMC) or the net start command line tool.

  You can check the link: http://technet.microsoft.com/en-us/library/cc733299 (WS.10) .aspx

  Method 3: Run a scan of the System File Checker.

  http://support.Microsoft.com/kb/929833

  It will be useful.

• whenever I re - start the computer I get this error: could not load the file nta0104.dll.

  "original title: NTA0104.dll.

  whenever I re - start the computer I get this error: could not load the file nta0104.dll. How can I fix?

  HM

  Hello

  Google who provides virtually no information that suggests it might be the malicious program or a start remains for her entry search

  Download update and scan with the free version of malwarebytes anti-malware

  http://www.Malwarebytes.org/MBAM.php

  You can also download and run rkill to stop the process of problem before you download and scan with malwarebytes

  http://www.bleepingcomputer.com/download/anti-virus/rkill

  If it does not remove the problem and or work correctly in normal mode do work above in safe mode with networking

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode with networking with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  If the error persists after scanning use this program to out startup

  This utility, which has a knowledge of auto-starting locations of any startup monitor, shows you what programs configured to run at system startup or login and that the entries in the order of processing windows. These programs include those in your startup folder, Run, RunOnce, and other registry keys. You can configure Autoruns to show other locations, including Explorer shell, toolbar extensions, helper objects to the browser, Winlogon notifications, auto and many start-up services even more.

  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902

• HP deskjet 6122 could not load the driver on the CD, he says is no longer supported

  Original title: printer HP Printer driver

  I have an old printer of HP deskjet 6122.  It works very well.

  However, when I plugged in a new desktop computer, I could not load the driver for the CD.  He said that it is more compatible.

  Later, I learned that the driver for HP 990 will work as a substitute.

  When I go to the HP site, there is no help as it attempts to identify my printer before you download the driver.  It identifies my printer 6122 as obsolete and will not load the driver down 6122 or 990.

  Where can I go to download the HP 990 regardless of HP driver?

  It's the HP 990c driver you want?

  If so have you tried selecting the update of Windows while in the Add Printer Wizard?

  It will take more than 5 minutes to get an updated list of printers and the 990c is.

  You can get them here too:

  Drivers HP for Windows update