Could not load because it requires version 10.1 or later of documents.indesignplugin Dynamics plugin adobe indesign cc 2014. Contact the vendor for a compatible version of documents.indesignplugin dynamic

Similar Questions

• Could not load file or Assembly runtime being more recent than currently loaded run time

  I've recently upgraded to TestStand 2010 and Visual Studio 2010 TestStand 4.2.1 and Visual Studio 2008. I now get the following error in the analysis of the sequence for all calls to my .net dll.

  "Step"My_StepType"not loadable module. Could not load file or Assembly or one of its dependencies. This Assembly is built by a runtime newer than the runtime currently loaded and cannot be loaded. »

  I don't know how LONG it is. All of this worked previously. I tried to go back to the dll, but that makes no difference.

  Any ideas?

  Thank you.

  I found where this topic is discussed in detail a bit more.  It is in the TestStand reference manual that is installed with TS.  TS 2010 it's on page 5-12 and the section labeled using .NET Framework under section adapter .NET of Chapter 5 (Module adapters).

• Error: operating system could not be loaded because a required file is missing or contains errors. Error code: 0oxc0000185

  Hello my dear,

  I need your help if you can as soon as possible.

  My problem was unexpected, when I turned on my laptop computer and received the following message:

  "Your pc needs to be repaired the application ot operating system could not be loaded because a required file is missing or contains errors.

  File: \Windows\system32\winload. EFI

  Error code: 0oxc0000185

  You will need to use tools of recovery on your installation media. »

  Here some useful information can by important for you:

  * my laptop is dell inspiron 15R.

  Operating system is windows 8.

  * windows has been installed on the laptop (by the company) and I DID NOT CHANGE IT.

  * I don't have a windows CD.

  * The problem occurs the first time.

  I am ready to give all forgotten information.

  Help, please.

  Thank you very much.

  Original title: recovery

  Companies who pre-install Windows on your computer usually have a generally accessible, integrated conservation program by rebooting and press a special recovery as F2, delete, or escape.

  You want to contact Dell or refer to the manual of your laptop to find out how to start the repair process.

  You can go to http://support.dell.com to discuss with their technical support directly too.

• Could not load file or assembly ' NationalInstruments.VisaNS, Version = 8.9.20.108

  I have an app VS c# that references the assembly OR world.  It worked fine in 32-bit Windows XP environment.  However, when I installed and ran the application in the Windows 7 64-bit environment.  The app was the following text:

  System.IO.FileNotFoundException: Could not load file or assembly 'NationalInstruments.VisaNS, Version = 8.9.20.108, Culture = neutral, PublicKeyToken = 4544464cdeaab541' or one of its dependencies. The system cannot find the specified file.
  "File name: ' NationalInstruments.VisaNS, Version = 8.9.20.108, Culture = neutral, PublicKeyToken = 4544464cdeaab541"

  Where can I find this assembly file version and why did not he ask you when I ran into the Windows XP 32-bit platform?  It's the same application binary.

  Thanks for your help!

  Another reason, you can get this error if you have your target, the value 'Any CPU' platform in the project properties. "Any CPU" setting causes the application runs in 32-bit on a 32-bit system and 64-bit on a 64 bit system mode. It would be a problem or a 64-bit system because you don't have the 64-bit installed assemblies and a 64-bit application cannot load a 32-bit assembly. You must change this setting to 'x 86' which will force to run in 32-bit mode on 32-bit and 64-bit systems.

• "Error: could not load file or assembly ' WMIControlLibrary, Version = 1.0.0.0, Culture = neutral, PublicKeyToken = null ' or one of its dependencies. The system cannot find the specified file

  Hey all,.

  I have a user running windows Xp Professional with service pack 3. The user gets the following error message when it connects to the computer every morning. "Error: could not load file or assembly ' WMIControlLibrary, Version = 1.0.0.0, Culture = neutral, PublicKeyToken = null ' or one of its dependencies. The system cannot find the specified file. The only thing that seems to not work is calendar Office Print Wizard. I deleted this file and the problem persists. Also, I have not found anything in the case where the viewer that relates to this error. The only mistake I found was an issue with the .net framework. I removed all the facilities framework and their updates. Restarted the computer and ther error disappeared and was replaced by errors in programs that require this file to work. I reinstalled .net framework 2 and returns the error. I left all the machine off separation executives. I did a repair on the .net framework without change. I'm not quite sure that the .net framework is the problem though. I guess that if just. At this point I don't know where to go from here how to solve this problem. Anyone got ideas?

  Hi tripleb316,

  ·         Did you do changes on the computer before the show?

  Follow these methods.

  Method 1: Follow these steps:

  Step 1: Start the computer in safe mode and check if the problem persists.

  A description of the options to start in Windows XP Mode

  http://support.Microsoft.com/kb/315222

  Step 2: If the problem does not still in safe mode, perform a clean boot to see if there is a software conflict as the clean boot helps eliminate software conflicts.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Note: After completing the steps in the clean boot troubleshooting, follow the section How to configure Windows to use a Normal startup state of the link to return the computer to a Normal startupmode.

  After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.

  (a) click Start, run.

  (b) type msconfigand click OK.

  (c) the System Configuration Utility dialog box appears.

  (d) click the general tab, click Normal startup - load all services and device drivers and then click OK.

  (e) when you are prompted, click on restart to restart the computer.

  Method 2: Scan the file system (CFS) auditor to repair corrupted files.

  Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe)

  http://support.Microsoft.com/kb/310747

• Just rec had delivered Lightroom 5 w / new camera.   Could not load the disc to my OS10.9 [said coverage requirements = 10.7 and 10.8] advice?

  Just rec had delivered Lightroom 5 w / new camera.   Could not load the disc to my OS10.9 [said coverage requirements = 10.7 and 10.8] advice?

  Hello

  You can simply download the latest version version here and install.

• Could not load file or assembly ' System.Data.SqlServerCe, Version = 3.5.1.0, Culture = neutral, PublicKeyToken = 89845dcd8080cc91 "... error so that the HD writer AE 3.0 graphic opening programme"

  Original title: could not load file or assembly 'System.Data.SqlServerCe, Version = 3.5.1.0, Culture = neutral, PublicKeyToken = 89845dcd8080cc91' or one of its dependencies

  Hello I am looking for a way to solve:

  Could not load file or assembly 'System.Data.SqlServerCe, Version = 3.5.1.0, Culture = neutral, PublicKeyToken = 89845dcd8080cc91' or one of its dependencies.

  This message appears whenever I try to open a graphics program HD writer AE 3.0

  I'm running xpsp3 and all updates are underway according to Microsoft

  Hello

  1. were you able to use the program without any problem before?

  2. don't you make changes on the computer before this problem?

  Step 1: Repair of .net framework and check.

  Reference: http://blogs.msdn.com/b/astebner/archive/2008/08/28/8904493.aspx

  Step 2: Uninstall and reinstall this program.

• Norton network adapter "Microsoft ISATAP map2" diagnostic reports works do not correctly-could not load the required device driver (code 31)

  Original title: System reports the NIC does not properly

  Using Vista Home premium on HP pavillion m8075a model RZ555AA-ABG. Norton network adapter "Microsoft ISATAP map2" diagnostic reports works do not correctly-could not load the required device driver (code 31)

  As none of the problems are met with connection network, do I ignore this warning or try to update the driver?

  Hi eucalyptussurfer,

  You can ignore this error message. This error message does not indicate a problem with the adapter. The adapter will continue to function correctly.

  Please see the following article:

  On a Windows Vista-based computer or on a Windows Server 2008-based computer, the Microsoft ISATAP map appears with a yellow exclamation mark next to it in Device Manager, and you also receive an error message

  http://support.Microsoft.com/kb/932520

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Could not load file or assembly ' Oracle.DataAccess, Version = 4.112.4.0?

  Hi guys,.

  As the title says "could not load file or assembly ' Oracle.DataAccess, Version = 4.112.4.0. The program crashes when I try to run the following code.

  OracleConnection Con = new OracleConnection (ConfigurationManager.ConnectionStrings ["ConnectionString1"]. (ToString());

  SqlCmd OracleCommand = new OracleCommand();

  OracleDataReader dr;

  sqlCmd.Connection = Con;

  Con.Open ();

  sqlCmd.CommandText = "INSERT INTO ADFG values (0, 0, 0, ' ', sysdate);

  sqlCmd.ExecuteNonQuery ();

  sqlCmd.Clone ();

  MessageBox.Show ("inserted record!");

  Any help would be appreciated.

  Hello

  This occurs generally when there is an inconsistency in the application of ILO version and the version of ODP.NET bits.

  If you compiled/built the application with Any CPU option, please modify X 86 or X 64 and build and run the code.

  Thanks and greetings

  Vincent

  Support of Oracle

• I have can´t initialize photoshop for this reason could not load actions because an unexpected end of file was encountered. "Could not initialize Photoshop because the preferences file was invalid (removed)" How can I solve this problem?

  I have can´t initialize photoshop for this reason could not load actions because an unexpected end of file was encountered. "Could not initialize Photoshop because the preferences file was invalid (removed)" How can I solve this problem?

  I have a MacBook Pro.

  App - Adobe Creative suite 5.5

  The only application that initialize does´t is photoshop

  Solve the problem

  FAQ: How to reset my preferences?

  Thank you Jeffrey Tranberry

• Plug-ins that could not load: VERSION No. 3 - d

  After installing PS CS5X on my new Win 7-64 system, I get this message when I open PS64bit:

  Plug-ins that could not load:

  VERSION No. 3 - d - from the file '3 - D.8bf '.

  I have not yet tried anything in the 3-d scene in PS - 64 bit.

  There is no reference to this in the search.

  Appreciate any suggestions to solve them.

  Thank you

  RON C

  Hi Ron,

  I'm sure this is a third party that is not 64-bit compatible plug-in. Did you copy plug-ins alumni for your installation of CS5 or point the other plug-ins preferably to a directory of plug-ins? Try running the 32-bit version of Ps, then go to help > about plug-in to see what third party plaug-ins are there.

  Kind regards

  Steve

• Could not load file or assembly ' Oracle.DataAccess, Version = 2.111.6.20

  I have visual Studio 2008 and ODAC installed Winows 7, my VS2008 application recovers data from Db Oracle 10 g xe. I get this error report wih spare no effort to connect and interact wih the database:
  
  "Could not load file or assembly ' Oracle.DataAccess, Version = 2.111.6.20,
  Culture = neutral, PublicKeyToken = 89b483f429c47342' or one of its dependencies.
  The system cannot find the specified file. »
  
  What could be the problem? The same code that worked on Vista is returning to this error report.

  Hello

  Oracle 11 g 2 32 and 64-bit client are available for download on:

  http://www.Oracle.com/technology/tech/dotnet/index.html

  That should solve the problem you have

  Thank you

  Mrinal

• Could not load library nationalinstruments.ui

  Received this error message: could not load file or assembly 'NationalInstruments.UI, Version = 8.6.35.465, Culture = neutral, PublicKeyToken = 18cbae0f9955702a' or one of its dependencies. The system cannot find the specified file.

  This app works fine on XP 32-bit with software "eval", but when I move to Vista64 I get the above error.  App is VS2008 Visual Basic.NET under. NET3.5.

  The dll is properly referenced in VS2008 project references and file exists in the specified location.  Don't just open.  It is a problem of execution - app built without errors or warnings.

  Thank you.

  Tom.

  Hey Tom,

  This is probably because your project is configured to target AnyCPU and not x 86 (Measurement Studio assembled currently only support the x 86 platform).  See the help topic using Measurement Studio on 64-bit operating systems for more information.

  NickB

  National Instruments

• Error 14: could not load data space type card

  Hello

  I wrote a program in Labview 8.5 on a single computer, saved and copied to another computer. Here, I got this error message when I open the vi: Labview: memory is full, Labview support code 14 error: could not load type mapping of spatial data. I try to start the vi one the first computer again and it crashed. Then that crashed it corrupted each associated with the main vi vi. Even those I've recorded previously and which were not open at the time (I closed haven´t Labview between then that they were likely in the memory of Labview). I have encounter this error several times and each time I used the package inside the vi IMAQ. Is there a solution?

  Hi Alex,

  Unfortunately there seems to be another similar problem which prevents the LV2009 of savings for version 8.5 or earlier if the vi contains a structure of the event. (AS 183005).

  The solution is to use the 2009 SP1 version where this bug has been fixed.

  The solution for the other BECAUSE I mentioned has not been set so that the upgrade to SP1 and re-registration in version 8.2 is the way to do it for the moment.

  I apologise for the inconvenience this is causing. Let me know if you are able to fix it with that.

  Kind regards

• Once I turned on the computer I got the following message: Windows could not start because the following file is missing or damaged. System32\Drivers\Ntfs.sys

  I just download Microsoft Office 2010 Professional and then turns off the computer with XP operating system. Once I turned on the computer I got the following message:

  Windows could not start because the following file is missing or damaged;

  System32\Drivers\Ntfs.sys

  You can try to repair this file by starting Windows Setup using the original Setup CD

  Select 'r' in the first screen to start repair.

  Then, I started the computer with the Original installation CD and press 'r' by following the instructions. Then, I received this message:

  1: C:\WINDOWS

  Which Windows installation you want to connect?

  (to cancel, press enter)

  What do I put here?

  You must first start on doing something so USB drive a bootable Hiren.

  Here's how:

  I'll recommend you use Hiren boot CD (it will go also to a flash/USB stick/USB).

  It's good for you, because there a lot of tools more on that on the Recovery Console CD of XP, doesn't your administrator passwords and you will not have to futz round in your BIOS, if any afflicted system has SATA drives - Hiren can deal with this.

  You will have a bunch of great tools that you have in XP... Recovery Console an editor of the register, adjustable password and an office that resembles Windows XP so you will feel comfortable flexibility.

  You can easily copy your personal data (documents, pictures, music) to an external drive.

  A system of work, start by downloading the latest version on Hiren Boot CD from here (it is a substantial download but worth it):
  http://www.hirensbootcd.org/download/    (look to the bottom of the page).

  Unzip the Hiren to a folder where you can find it.  There's a Hiren. BootCD.15.x.iso that you have to then.

  Hiren was instructed to make a bootable USB drive that you can use, but it takes you first burn the .iso to a CD image file and a few other measures, so I suggest another way and here's how:

  Download RUFUS 1.3.2 or whatever the latest version is here (read a few things on the page so you can learn more on this subject):

  http://Rufus.AKEO.IE/

  I will warn to be careful that don't accidentally format you a hard disk - don't forget your USB key is in and know what the drive letter!  This part makes me still a little nervous, so be careful.

  Launch of RUFUS and all default values should be fine for the device, choose letter of your USB drive, quick tag format FAT32, it if you want and in the Format options box, click on the little icon that looks like a CD and a window will open.  Navigate through this dialogue to point to the folder that contains the Hiren. BootCD.15.x.iso that you have unpacked above and the box should change to say the image ISO (RUFUS includes the Hiren ISO file).

  Double check you have the right device selected in the top (NOT you HDD) click Start, acknowledge receipt of the warning and let it finish (it will take a little time) it copies the files.   Hiren ISO is also a good size.

  When RUFUS is finished, it will say "DONE" at the bottom.

  Put the USB in the afflicted machine and reset/reboot and regardless of the button you press to get a boot menu where you can select the USB drive as first boot device (it's F11 for me).  If you do not see a start menu choice, you will need to set your BIOS to boot from USB first instead of the HARD disk.

  When the Hiren menu displays, choose the XP Mode of Mini and it will start loading (slowly from a USB key) and finally, you should see a windowsy looking for office.  You should recognize the part and feel uncomfortable, but it is not your office - the office of the Hiren!

  Remember: you do not start on your hard drive, - you started in the Office of the Hiren.

  A way to check the drive for errors is to open my computer and right-click on your afflicted player and choose Properties, tools, error, check checking now... put a check mark in the boxes and then start.

  Sometimes that works, then you can also click on start, run and in the type box:

  cmd

  Click OK to open a command prompt window and enter the following command (assuming that XP is installed on your C drive)

  CHKDSK c: /r

  This disk check can last a long time (perhaps several to several hours) depending on the size of the volume, the amount of data on the volume and what the disk check finds to do.  You may need to run more than once.