Could not load the HP Solution Center
I had to reload my HP PC of the image of manufacturers, Windows update and upgrade to Windows 7. I followed all the steps to load the full software features several times. My impressions C4780, but the scan function has an error which suggests the scan from the PC. Never loaded repeated loads and HP solutions Center does not get the responsible Solution Center.
I hope not to repeat the full recovery. Is it possible to get the PC based Centre of Solution without making the full restore?
Welcome to the forums, @captbill99
I understand that you're having trouble installing the software for the printer on your Windows 7 system, and can I just have a few suggestions to help out you!
I suggest a level 3 uninstall first. This "deeper" uninstall will remove all the files on your PC printer.
1. Click Start and type %temp% enforcement, press ENTER to open the temp folder
2. Locate and open the folder starting with 7z (example: 7zS2356) (if there is more than one, choose the most recent folder)
3 open the Util folder
4 open the CCC folder
5. run the L3uninstall.exe
6. once the uninstall is complete, restart the computer
7 run the Accessories\ System Tools Disk Cleanup
8. download and install the latest version of Adobe flash player
http://www.Adobe.com/support/flashplayer/downloads.html
9 download drivers and full software features: HP Photosmart C4700 all-in-One Printer series Full Feature Software and Driver
10. run the download to reinstall the printer
I hope that does the trick and gets the installation completes successfully. If there are any problems during the process, save a screenshot or write me back with the details.
Good luck
Tags: HP Printers
Similar Questions
-
Windows could not load the profile of the user
When I start my PC, is to show the windows user environment could not load the profile of the user, but you connected on default profile for details of the corrupted system registry.
Please reply me with the solution that I use win xp sp2Hi citycc,
1. did you of recent changes on the computer?
2 when was the last time it was working fine?
3. are you able to connect to Windows?
4. how many accounts do you have on the computer?
See the Microsoft article below and check if it helps.
Error message "Windows cannot load your profile because it may be corrupted" when you try to log on Windows XP
-
Hi Experts,
I am really evil with Opatch following error... any suggestions would be very appreciated. ! Thank you!
am version of database upgrade R12.1.1 Vision of 11.1.0.7 for 11 GR 2 following this Doc.
Doc-ID 1585578.1 (Interoperability notes Oracle EBS R12 with Oracle Database 11 g 2 (11.2.0.3) )and I checked this as understanding OPatch tool and patch [1451669.1 ID]!
After you apply the patches on apps and db level pre-installation and Installation of 11.2.0.3 home.
When I tried to apply the Patch getting following error. Also, I can't apply any Opatch or Patch DB with each Patch am getting the same error
[oracle@ebs 14229857] $ /11.2.0.3/OPatch/opatch apply
Setup Oracle interim Patch version 11.2.0.3.6
Copyright (c) 2013, Oracle Corporation. All rights reserved.
Oracle homepage: /11.2.0.3
Inventory Center: / oracle/oraInventory
from: /11.2.0.3/oraInst.loc
OPatch version: 11.2.0.3.6
YES version: 11.2.0.3.0
Location of the log file: /11.2.0.3/cfgtoollogs/opatch/opatch2014-05-08_18-58-59PM_1.log
Could not load the patch object. Possible causes are:
The specified path is not an intermediary shiphome Patch
Metadata files are missing in the region of patch
Patch location = / oracle/14229857
Details = PatchObject manufacturer: Input file ' / oracle/14229857/etc/config/actions "or" / oracle/14229857/etc/config/inventory "does not exist.
OPatch failed: PatchObject manufacturer: Input file ' / oracle/14229857/etc/config/actions "or" / oracle/14229857/etc/config/inventory "does not exist.
Location of the log file: /11.2.0.3/cfgtoollogs/opatch/opatch2014-05-08_18-58-59PM_1.log
OPatch failed with the error code 73even if the patch 6880880 is successfully applied to the updated version OPtach also I set the Path variable for export PATH = $ORACLE_HOME/OPatch: $PATH
There is no problem with the permissions on files and directories. as I have cross checked.
/oracle/VIS/db/tech_st/11.2.0.3/OPatch/opatch lsinventory-details
Setup Oracle interim Patch version 11.2.0.3.6
Copyright (c) 2013, Oracle Corporation. All rights reserved.
Oracle homepage: /11.2.0.3
Inventory Center: / oracle/oraInventory
from: /11.2.0.3/oraInst.loc
OPatch version: 11.2.0.3.6
YES version: 11.2.0.3.0
Location of the log file: /11.2.0.3/cfgtoollogs/opatch/opatch2014-05-08_19-26-02PM_1.logLocation of the output file Lsinventory: /11.2.0.3/cfgtoollogs/opatch/lsinv/lsinventory2014-05-08_19-26-02PM.txt
--------------------------------------------------------------------------------
Installed products of higher level (2):Oracle Database 11g 11.2.0.3.0
Oracle Database 11 g examples 11.2.0.3.0
There are 2 product (s) installed in the home of Oracle.
Here are the details of Patch Log!
YES location: /11.2.0.3/oui
Location of the log file: /11.2.0.3/cfgtoollogs/opatch/opatch2014-05-08_18-58-59PM_1.log
[May 8, 2014 18:58:59] History of patch file: /11.2.0.3/cfgtoollogs/opatch/opatch_history.txt
[May 8, 2014 18:58:59] From ApplySession Thu May 08 18:58:59 IST 2014
[May 8, 2014 18:58:59] Starting apply Session at Thu May 08 18:58:59 IST 2014
[May 8, 2014 18:58:59] YES-67075: cannot load the patch object. Possible causes are:
The specified path is not an intermediary shiphome Patch
Metadata files are missing in the region of patch
Patch location = / oracle/14229857
Details = PatchObject manufacturer: Input file ' / oracle/14229857/etc/config/actions "or" / oracle/14229857/etc/config/inventory "does not exist.
[May 8, 2014 18:58:59] OPatch will clean the files 'restore.sh, make.txt' and "backup cars, scratch," directories.
You will always be able to restore patches after this cleaning.
Do you want? [y | n]
[May 8, 2014 18:59:02] Y (auto-répondu by - silence)
[May 8, 2014 18:59:02] The user responded with: Y
[May 8, 2014 18:59:02] Size of the directory "/11.2.0.3/.patch_storage"before cleaning is 269296 bytes. "
[May 8, 2014 18:59:02] Size of the directory "/11.2.0.3/.patch_storage"after the cleaning is 269296 bytes. "
[May 8, 2014 18:59:02] UtilSession: Save for the restoration area was cleaned. For a complete list of files/directories
removed, please see the log file.
[May 8, 2014 18:59:02] YES - 67073:OPatch failed: PatchObject manufacturer: Input file ' / oracle/14229857/etc/config/actions "or" / oracle/14229857/etc/config/inventory "does not exist.
[May 8, 2014 18:59:02] YES - 67035:System is intact, OPatch will not restore the system
[May 8, 2014 18:59:02] Finishing ApplySession at Fri May 08 18:59:02 IST 2014
[May 8, 2014 18:59:02] Total time spent waiting for user input is 0 seconds. End at Thu May 08 18:59:02 IST 2014
[May 8, 2014 18:59:02] Location of the log file: /11.2.0.3/cfgtoollogs/opatch/opatch2014-05-08_18-58-59PM_1.log
[May 8, 2014 18:59:02] Description of the battery: java.lang.RuntimeException: PatchObject manufacturer: Input file "/ oracle/14229857/etc/config/actions" or "/ oracle/14229857/etc/config/inventory" does not exist.
[May 8, 2014 18:59:02] StackTrace: oracle.opatch.PatchObject.createPatchObject(PatchObject.java:2433)
[May 8, 2014 18:59:02] StackTrace: oracle.opatch.PatchObject. < init > (PatchObject.java:2000)
[May 8, 2014 18:59:02] StackTrace: oracle.opatch.PatchObjectUtil.loadPatch(PatchObjectUtil.java:2188)
[May 8, 2014 18:59:02] StackTrace: oracle.opatch.ApplySession.loadAndInitPatchObject(ApplySession.java:1553)
[May 8, 2014 18:59:02] StackTrace: oracle.opatch.ApplySession.process(ApplySession.java:5850)
[May 8, 2014 18:59:02] StackTrace: oracle.opatch.OPatchSession.main(OPatchSession.java:2060)
[May 8, 2014 18:59:02] StackTrace: oracle.opatch.OPatch.main(OPatch.java:614)
~Thank you
Priya
Priya,
You try to apply (Patch 14229857)? If so, it's for Exadata then is it applicable?
11.2.0.3 patch # is 10404530
11 GR 2 11.2.0.3 database certified with E-Business Suite
https://blogs.Oracle.com/stevenChan/entry/11gr2_11_2_0_3
Please note that 11.2.0.4 is the Group of hotfixes later certified 11 GR 2.
11.2.0.4 database certified with E-Business Suite
https://blogs.Oracle.com/stevenChan/entry/11_2_0_4_database
Thank you
Hussein
-
Could not load the Norton power Eraser
Installed Norton Security. Everything works well except a pop up window that says error 5013,3.
Following the instructions I downloaded Norton Power Eraser. When you are finished, the pop-up with the addon window said I need a newer version of Power Eraser and "click here".
No mater how many times I try, could not load the new version.
Don't know what I was doing wrong before, but when the pop-up window came this time it worked.
I'm glad that it worked, but I wish I knew why.
-
I have W XP, SP3. Suddenly, Adobe reader showed the error: Acrobat could not load the DLL base. Have Adobe reader X (10.0.1) who refuses to be carried away. Other than a drive X (10.1.0) has been reinstalled. Also have Acrobat reader 5.0 is installed from a CD of the Canon scanner slide. The error remains. If anyone can help. Leif Stg
Hi Leif,
Where do you get this error message?
I suggest you to follow the steps and check if it helps.
Method 1: Uninstall all the instance of Adobe reader and Acrobat reader and install the latest version of one of the drive and check if it helps.
http://get.Adobe.com/reader/?promoid=DINRS
Method 2: If the problem persists, perform a system restore and check if that helps.
-
When my computer is on suddenly power went and my system also closed that crashed without logging my user account. now, I started my computer and I tried to open a session in my account (having only one user account) but he goes to the temporary login account, it displays "could not load the profile user and loading of temporary user account if you make changes to this user account it will be erased when you connect after." What can I do? How can I solve it? I use windows xp.
Original title: Temp user login
Hi indhru,
- Did you the latest changes on the computer?
- You have security software installed on the computer?
Try the step after the connection to the temporary account below.
- Click on the Start menu.
- Type Regedit in the Run dialog box, and then press enter
- Access
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\ProfileList - There is 1 line for each profile. Especially if a profile is bad there are 3 things worth visiting:
- Make sure that the name of the key are not ends in ".bad".
- Make sure the RefCount value is 0
- Ensure that the status value is 0
-
Could not load the dll target, the error code 126
A "runner error" box keeps popping up saying "could not load the dll target, error 126" code. This appears at all different times, even when I'm not using the computer. I don't know why it gives me this error or how I can get rid of him for good.
Hello Tracy,.
Try to configure your system to boot into boot mode (Ref: http://support.microsoft.com/kb/310353) will help you identify the problem.
I hope this helps.
-
Could not load the profile user (XP OS) and lost files
Hello
I tried to connect to my help my profile on XP last night and message box came up saying that my profile cannot be loaded. I am currently in the temporary profile that was created automatically by the system for this profile. It seems that files on another profile missing now and I can't get back my original profile. This profile has been my administrator profile that I created to replace the supplied profile admin system.
I checked the event log and I see an error event ID: 7026 "could not load the driver system or next start: Lbd." recently, I used the 'delete' function to get rid of one or two programs but was able to connect after you remove these two programs, so I don't think that was my problem with profile.
I've seen a few comments on the forums, but they are especially for non XP OS. Is it possible to retrieve the profile and files.
Please notify.
Thank you for your time.
Recovering from a corrupted or damaged user profile is a relatively simple operation. Follow the instructions in the following article:
"How to recover damaged Windows XP user profile"
<>http://support.Microsoft.com/kb/555473 >HTH,
JW -
MY LAPTOP STOPPED ABRUPTLY AND APPEARED A BLUE SCREEN AFTER I HAVE INSERT USB NETCONNECT. IT IS THE FIRST TIME HE TOUCHED WITH THIS ERROR. I DON'T KNOW WHAT AND WHY, ON THIS SUBJECT. PLEASE HELP ME TO GET RID OF HER... THANQ
Hello1. using a Sony Vaio laptop?2. don't you get also 'VzCdbSvc' and level: 'error '?If the answer is Yes to these questions, you can do the following.vzcdbsvc.exe is a process belonging to VAIO Entertainment studio. 'S called it VAIO Entertainment Database Service belonging to VAIO Entertainment studio.DESC. : Could not load the plug-in module.Step 1:a. Click Start > runb. Type "msconfig" and press enterc. Selective startup > Startup tabd. UNCHECK this process > apply > OKStep 2:Change the startup type of the Service:a. Click Start > run >b. Type "services.msc".c. right-click on VzCdbSvc. > properties > change manual start > apply > OK.d. right-click on the connection manager automatic remote access > manual change > OK.I don't know if this will solve your problem or not, but it is worth trying.Aziz Nadeem - Microsoft Support -
Could not load the faile to logon user profile service, the user profile.
Could not load the faile to logon user profile service, the user profile
That's what I have to answer when I try to log on to my PC Window Vista with my password.
Need help please.
Hello
1st thing to try is the system in safe mode restore to before the problem
http://www.windowsvistauserguide.com/system_restore.htm
Windows Vista
Using the F8 method:
- Restart your computer.
- When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
- Select the Safe Mode option with the arrow keys.
- Then press enter on your keyboard to start mode without failure of Vista.
- To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
- Do whatever tasks you need and when you are done, reboot to return to normal mode.
If that does not solve it read more
read the tutorial below
When you log on a Windows Vista-based or a Windows 7 computer by using a temporary profile, you receive the following error message:
The user profile Service has not logon. User profile cannot be loaded.http://support.Microsoft.com/kb/947215#letmefixit
Your user profile was not loaded correctly! You have been logged on with a temporary profile.
http://support.Microsoft.com/kb/947242
If you tried to log on to Windows and received an error message telling you that your user profile is damaged, you can try to fix it. You will need to create a new profile and then copy the files from the existing to the new profile. You must have at least three user accounts on the computer to perform these operations, including the new account that you created.
http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profile
-
"original title: NTA0104.dll.
whenever I re - start the computer I get this error: could not load the file nta0104.dll. How can I fix?
HM
Hello
Google who provides virtually no information that suggests it might be the malicious program or a start remains for her entry search
Download update and scan with the free version of malwarebytes anti-malware
http://www.Malwarebytes.org/MBAM.php
You can also download and run rkill to stop the process of problem before you download and scan with malwarebytes
http://www.bleepingcomputer.com/download/anti-virus/rkill
If it does not remove the problem and or work correctly in normal mode do work above in safe mode with networking
Windows Vista
Using the F8 method:
- Restart your computer.
- When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
- Select the Safe Mode with networking with the arrow keys.
- Then press enter on your keyboard to start mode without failure of Vista.
- To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
- Do whatever tasks you need and when you are done, reboot to return to normal mode.
If the error persists after scanning use this program to out startup
This utility, which has a knowledge of auto-starting locations of any startup monitor, shows you what programs configured to run at system startup or login and that the entries in the order of processing windows. These programs include those in your startup folder, Run, RunOnce, and other registry keys. You can configure Autoruns to show other locations, including Explorer shell, toolbar extensions, helper objects to the browser, Winlogon notifications, auto and many start-up services even more.
-
original title: I need to know what means this message and I can remove it from my computer
doess someone knows what this message means? Could not load the manifest attribute of the main class of C; \program files\frostwire\commons-logging, pot every time I look at this subject in my file, it appears, I'm not good at all with computers but I know im short-term memory or space on this computer and I tried to go into my programs and delete, can you please help me understand what I can and can not delete to give me more space? Thanks, im running Windows Vista! If you would like more information, I'm sorry, just ask me? Thanks again, I hope someone can help me! :(
This discussion forum on Microsoft Security Essentials antimalware. You can get help in the Microsoft Vista answers forums - http://answers.microsoft.com/en-us/windows/forum/windows_vista
Jim
-
Original title: System reports the NIC does not properly
Using Vista Home premium on HP pavillion m8075a model RZ555AA-ABG. Norton network adapter "Microsoft ISATAP map2" diagnostic reports works do not correctly-could not load the required device driver (code 31)
As none of the problems are met with connection network, do I ignore this warning or try to update the driver?
Hi eucalyptussurfer,
You can ignore this error message. This error message does not indicate a problem with the adapter. The adapter will continue to function correctly.
Please see the following article:
On a Windows Vista-based computer or on a Windows Server 2008-based computer, the Microsoft ISATAP map appears with a yellow exclamation mark next to it in Device Manager, and you also receive an error message
http://support.Microsoft.com/kb/932520
Hope this information is useful.
Jeremy K
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think.If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.
-
HP deskjet 6122 could not load the driver on the CD, he says is no longer supported
Original title: printer HP Printer driver
I have an old printer of HP deskjet 6122. It works very well.
However, when I plugged in a new desktop computer, I could not load the driver for the CD. He said that it is more compatible.
Later, I learned that the driver for HP 990 will work as a substitute.
When I go to the HP site, there is no help as it attempts to identify my printer before you download the driver. It identifies my printer 6122 as obsolete and will not load the driver down 6122 or 990.
Where can I go to download the HP 990 regardless of HP driver?
It's the HP 990c driver you want?
If so have you tried selecting the update of Windows while in the Add Printer Wizard?
It will take more than 5 minutes to get an updated list of printers and the 990c is.
You can get them here too:
-
Could not start the Windows Security Center service.
Could not start the Windows Security Center service. Tried to go to Services, but this message. Help me please!
the error code says...
one or more ActiveX controls could not be displayed because that is:
1. your current prohibiti of security settings on this page activex controls running or,
2. you have blocked an editor of one of the controls.
Hello
· Since when are you facing this problem?
· Remember to make changes to the system?
Note: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following link. http://Windows.Microsoft.com/en-us/Windows7/back-up-the-registry
I suggest you follow the steps mentioned below.
a. click on Start menu and type regedit.exe in the start search box and press ENTER.
b. navigate to the following location. You must remove 1 (parasite) of additional area
HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Internet Settings\Zones\
with number Pseudo-graphique, you will see before the number of zone 0.c. check to see if the problem is resolved;
Thanks and regards.
Thahaseena M
Microsoft Answers Support Engineer.
Visit our Microsoft answers feedback Forum and let us know what you think.
Maybe you are looking for
-
Satellite L300D - TEMPRO alert reader D capacity WARNING
I have a Satellite L300D. It has been little used, but I get TEMPRO alert that says that "data stored on drive D has reached 75 percent or more capacity: space 149,01 GB total disk and disk space GB 37.73.» Can anyone tell what it is and I can do som
-
Satellite M40-145: CD/DVD player will not play some DVD
Hello! I am the owner of a Satellite M40-145 bought a little over a year; DVD driver worked perfectly until three days ago, but today I discovered something... strange. Still, it reads the DVD business and burned the DVD + r, but apparently it does n
-
I built a labview moderately complex program to connect with a new parser that I build. To briefly describe the application, the main VI is a user interface which, in an initialization step, asynchronously calls a dozen other screws each called VI i
-
different sous-schemas of a case of structures Concat strings
I use a case structure, which has about 8-10 different cases and each case has a string constant. I want to show the strings in a single indicator. Suppose that if 3 cases runs first, then second and third then. Then, the indicator should show "first
-
After a clean install of Windows XP my system crashes.
Maybe a bad SATA hard drive? I formatted my hard drive to install xp pro sp1It formatted properly (I did a full install, not a quick)I set up the network, time and others.just after that, he says stay 29 mins. I look back about 5 minutes later and it