Could not map drive network - network 0x800704cf error

Similar Questions

• Could not reconnect all network drives

  My laptop is getting the message "Could not reconnect all network drives", at startup. I'm running Windows XP, service pack 3. I have a 'Z' allocated network drive, which is marked 'memory_card '.

  Must this drive be connected?

  If so, what are the steps.

  When I try to open this network drive, I get the message "an error has occurred during reconnection 'Z' (: to \\HP(serial number) \memory_card'."

  Thank you

  All of this makes sense now.

  Thanks for your help and happy new year!

  C1

• Could not reconnect all network drives in Vista...

  On startup, I get the message, form the notification area: "Could not reconnect all network drives.".  How to connect readers.  I have an Epson printer connected.

  Hello

  (1) what firewall are you using?

  You are connected to a Modem/Router? If so have them turn it off for 30 seconds and turn it back on.

  Let us know if that helps.

• Error 1606: 'could not access location network & AppData%.

  Please help with Error 1606, "could not access location network & APPDATA%\.»  Can someone please provide a fix?

  This problem occurs because there is incorrect entries in the Shell folder of the user who is logged on to Microsoft Windows. When Windows Installer goes to the sale of Shell folder of the user who is logged on to the computer, Windows Installer cannot locate the correct entry. The solution is inhttp://support.microsoft.com/default.aspx/kb/886549.

  The steps to correct this problem involve editing the Windows registry.  Change the settings of the REGISTRY can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the REGISTRY settings configuration can be solved. Changes to these settings are at your own risk. I suggest that you first back up your registry as follows: http://windows.microsoft.com/en-US/windows-vista/Back-up-the-registry.

  Here are the steps to fix it.

  1. click on start, run, typeregedit in the Open box, and then click OK.

  2. look for the following registry key:

  HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\User Shell dossiers\

  3 remove the entries that show the path that is listed in the error message.

  886549 KBhttp://support.microsoft.com/default.aspx/kb/886549: Regedit open again. In the left pane, click User Shell Folders, point tonew, click expandable string value, type the value name that you want to restore (AppData) and then press ENTER. Right click on this value, clickchange, type the value in the value data for the value name box, and then clickOK. The value data must be: % USERPROFILE%\AppData\Roaming.

  Step 8 KB 886549 suggests that you also check the values in HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Explorer\User Shell Folders. However, by fixing my problem, I had not to change values in the registry key. If this does not work, follow ALL the steps in the referenced article.

  Good luck. Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Storage migration fails with the error: could not complete the network copy to path to the file

  Hello

  I have two hosts ESXi 5.5 with local storage and VMware vCenter device which manage them. Everything worked well until that time.

  Now when I try to make the host migration and storage, processing or power off the virtual machine, I get the error message:

  Could not complete the network for file /vmfs/volumes/.../path/to/file.vmdk copy

  The situation is the same when I try to deploy VM on ESXi-2 model that is on ESXi-1.

  All with the network configuration is correct. I have ping between the hosts on ESXi and ESXi and vCenter. No firewall hosts ESXi and vcenter. No physical firewall between hosts.

  The network latency is less than 1 ms. No packet loss.

  I read this VMware KB article: Storage migration fails with the error: could not complete network file copy and I tried solutions explained here, but the results are the same.

  You have ideas where the problem may be?

  Hello guys,.

  I finally found the problem.

  ESXi servers are configured with MTU 9000, but the switch where the hosts are connected was a bug documented with frames. I found the problem after finding this article http://kb.vmware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalId=1003734

  I run the command of ESXi-1:

  vmkping - d-s 8972 192.168.10.12 where 192.168.10.12 is the ip address of ESXi-2

  The result was:

  3 packets transmitted, 0 packets received, 100% packet loss

  as a workaround, I reduce the MTU to 1500, then I patched the problematic switch.

• Windows 7 could not search for new updates code error C80003FA

  I just activated Windows 7. When I tried to update, I have "Windows 7 could not search for new updates C80003FA error code".

  Tried three times with the same result. Could someone, please?

  C80003FA ReadVerifyFailure - a read verification error occurred.

  1. What is the suite of security/antivirus installed?
  2 is a 3rd party firewall installed?
  3 - is an upgrade to another edition of Windows?

  Please click on the round of departure. In the search field type programs and files in wups2.dll

  Under programs right click wups2.dll and choose Properties, when the Properties window opens, click the Details tab.
  Version of the file and the product should be showing 7.4.7600.226
  Now do the same for c:\windows\system32\wuaueng.dll
  He, too, should show file version and product like 7.4.7600.226
   
  If the version is earlier than that, you will need to install the more recent Version of the Windows Update Agent.
  The easiest way to do this is therefore download and Save the Fixit found here - How to reset the Windows Update components?
  Once the download completes close all open programs and browsers.
  Run MicrosoftFixit50202.msi and choose its default mode.

  BUT, if the installed firewall antivirus/security suite or a 3rd party is causing the "reading check error" then the Fixit may/does not work.
  If this is the case, then Configure the system to boot after download and Save the Fixit.
  Then, run the Fixit after the reboot to clean boot state.
  Restart and Cancel the clean boot steps, restart again to normal Windows mode.
  
  NOTE: in the boot minimum state all the 3rd party firewalls will be disabled. When you run the Fixit either unplug the system from it is the network connection or make sure the native firewall of Windows 7 is now on by opening the control panel > Windows Firewall.

  Expert MowGreen Windows IT Pro - consumer safety

• ORA-12518: TNS:listener could not hand off client connection (DBD ERROR: OCIServerAttach)

  Hi again,

  I'm on my business management console and the database Instance and the headset shows the green arrow, but the connection of the Agent of the Forum shows a red arrow down and the error:

  Status: failed

  Details: ORA-12518: TNS:listener could not hand off client connection (DBD ERROR: OCIServerAttach)

  My OraClrAgnt service is up and running (using winxp pro, oracle 11 g 2), I'm on my pc at home, all my ports are open (name of my machine's "abigail" and it's dmzhost)

  Any suggestions to solve this error?

  My Tnsnames ora file:

  ABIGAIL =

  (DESCRIPTION =

  (ADDRESS_LIST =

  (ADDRESS = (PROTOCOL = TCP) (HOST = ABIGAIL)(PORT = 1521))

  )

  (CONNECT_DATA =

  (SERVICE_NAME = orcl.0.0.10)

  )

  )

  LISTENER_ORCL =

  (DESCRIPTION =

  (ADDRESS_LIST =

  (ADDRESS = (PROTOCOL = TCP) (HOST = ABIGAIL)(PORT = 1521))

  )

  (CONNECT_DATA =

  (SID = ORCL)

  )

  )

  RMAN =

  (DESCRIPTION =

  (ADDRESS = (PROTOCOL = TCP) (HOST = ABIGAIL)(PORT = 1521))

  (CONNECT_DATA =

  (SERVER = DEDICATED)

  (SERVICE_NAME = rman.abigail)

  )

  )

  My listener.ora

  SID_LIST_LISTENER =

  (SID_LIST =

  (SID_DESC =

  (SID_NAME = CLRExtProc)

  (ORACLE_HOME = E:\app\abigail\product\11.2.0\dbhome_1)

  (= Extproc PROGRAM)

  (ENVS = "EXTPROC_DLLS=ONLY:E:\app\abigail\product\11.2.0\dbhome_1\bin\oraclr11.dll")

  )

  )

  LISTENER =

  (DESCRIPTION_LIST =

  (DESCRIPTION =

  (ADDRESS = (PROTOCOL = CIP)(KEY = EXTPROC1521))

  (ADDRESS = (PROTOCOL = TCP) (HOST = ABIGAIL)(PORT = 1521))

  )

  )

  ADR_BASE_LISTENER = E:\app\abigail

  My SQLNET. ORA

  SQLNET. AUTHENTICATION_SERVICES = (NTS)

  NAMES. DIRECTORY_PATH = (EZCONNECT, TNSNAMES, LOCALHOST)

  NAMES. TRACE_LEVEL = ADMIN

  My alert file

  < time msg = "2013-10 - T 10, 20: 47:02.687 - 04:00 ' org_id = 'oracle' id_comp = 'tnslsnr'"

  type = 'UNKNOWN' level = '16' = host_id "ABIGAIL."

  host_addr =': 1' >

  < txt > 10 October 2013 20:47:01 * (CONNECT_DATA = (CID = (PROGRAM =)(HOST=__jdbc__) (USER = SYSTEM)) (SERVICE_NAME = orcl.0.0.10)) * (ADDRESS = (PROTOCOL = tcp (PORT = 38289))(HOST=127.0.0.1)) * establish * orcl.0.0.10 * 12518

  < / txt >

  < / msg >

  < time msg = "2013-10 - T 10, 20: 47:02.687 - 04:00 ' org_id = 'oracle' id_comp = 'tnslsnr'"

  type = 'UNKNOWN' level = '16' = host_id "ABIGAIL."

  host_addr =': 1' >

  < txt > TNS-12518: TNS:listener could not hand off client connection

  AMT-12560: TNS:protocol adapter error

  < / txt >

  < / msg >

  My listener status and services

  LSNRCTL > status

  Connection to (DESCRIPTION = (ADDRESS = (PROTOCOL = IPC) (KEY = EXTPROC1521)))

  STATUS of the LISTENER

  ------------------------

  Alias LISTENER

  Version TNSLSNR for 32-bit Windows: Version 11.2.0.1.0 - Prod

  ction

  Start date October 10, 2013 22:47:58

  Uptime 0 days 0 h 2 min 1 sec

  Draw level off

  Security ON: OS Local Authentication

  SNMP OFF

  Listener parameter File E:\app\abigail\product\11.2.0\dbhome_1\network\admin\l

  istener.ora

  E:\app\abigail\diag\tnslsnr\ABIGAIL\listener\ale log listener

  rt\log. XML

  Summary of endpoints listening...

  (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\EXTPROC1521ipc)))

  (DESCRIPTION = (ADDRESS = (PROTOCOL = tcp)(HOST=ABIGAIL) (PORT = 1521)))

  Summary of services...

  Service 'CLRExtProc' has 1 instance (s).

  Instance of 'CLRExtProc', status UNKNOWN, has 1 operation for this service...

  Service 'orcl.0.0.10' has 1 instance (s).

  Instance "orcl", State LOAN, has 8 managers of this service...

  The command completed successfully

  LSNRCTL > services

  Connection to (DESCRIPTION = (ADDRESS = (PROTOCOL = IPC) (KEY = EXTPROC1521)))

  Summary of services...

  Service 'CLRExtProc' has 1 instance (s).

  Instance of 'CLRExtProc', status UNKNOWN, has 1 operation for this service...

  Managers:

  "DEDICATED" set up: 0 denied: 0

  LOCAL SERVER

  Service 'orcl.0.0.10' has 1 instance (s).

  Instance "orcl", State LOAN, has 8 managers of this service...

  Managers:

  "D006" put in place: 0 denied: current: 0 0 max: 800 status: loan

  DISPATCHER < machine: ABIGAIL, pid: 1312 >

  (ADDRESS = (PROTOCOL =)(HOST=ABIGAIL) (PORT = 1060) CST)

  "D005" put in place: 0 denied: 12 current: 0 max: 800 status: ready

  DISPATCHER < machine: ABIGAIL, pid: 1288 >

  (ADDRESS = (PROTOCOL =)(HOST=ABIGAIL) (PORT = 1061) CST)

  "D004" put in place: 0 denied: 1 current: 1 max: 16383 State: loan

  DISPATCHER < machine: ABIGAIL, pid: 1260 >

  (ADDRESS = (PROTOCOL = tcp)(HOST=ABIGAIL) (PORT = 1063))

  "D003" put in place: 0 denied: 1 current: 1 max: 16383 State: loan

  DISPATCHER < machine: ABIGAIL, pid: 1140 >

  (ADDRESS = (PROTOCOL = tcp (PORT = 1062))(HOST=ABIGAIL))

  "D002" put in place: 0 denied: 1 current: 1 max: 16383 State: loan

  DISPATCHER < machine: ABIGAIL, pid: 140 >

  (ADDRESS = (PROTOCOL = tcp (PORT = 1059))(HOST=ABIGAIL))

  "D001" put in place: 0 denied: 1 current: 1 max: 16383 State: loan

  DISPATCHER < machine: ABIGAIL, pid: 1072 >

  (ADDRESS = (PROTOCOL = tcp (PORT = 1057))(HOST=ABIGAIL))

  "D000" put in place: 0 denied: 1 current: 1 max: 16383 State: loan

  DISPATCHER < machine: ABIGAIL, pid: 748 >

  (ADDRESS = (PROTOCOL = tcp (PORT = 1058))(HOST=ABIGAIL))

  "DEDICATED" set up: 0 denied: 0 status: ready

  LOCAL SERVER

  The command completed successfully

  I added this on my listener.ora

  DIRECT_HANDOFF_TTC_LISTENER = OFF

  Now it works!

  Moral of the story, google is your friend lol. Thanks for replying tho!

• Storage VMotion - a general error occurred: could not wait for the data.  Error bad0007.

  People,

  I searched through this forum and have not found an answer that works in many positions out there, I say to myself that I would ask him once again.

  Here's the context:

  We have 12 identical Dell M600 blades in 2 chassis with 16 GB of Ram, 2 x Xeon E5430, they are all connected to an Equallogic PS 5000XV iSCSI SAN on a separate iSCSI (vswitch1) with 2 cards network dedicated network and dedicated switch, console svc iscsi dedicated, dedicated VMkernel port for iscsi access. Net access (vswitch0) contains port groups VM for our various networks and a console port and vmkernel svc for VMotion with 2 separate NETWORK cards as well.

  We are running ESX 3.5 U3 and VCenter 2.5 U3 on Win2k3 R2

  VMotion works between all servers, Storage Vmotion works for most machines, HA works and the value 2 host failurs with no monitoring of vm, DRS is set to manual for now I have a few machines on the local stores that I complete my rebuilt LUN, there is no set of rules for DRS and VMware EVC is enabled for guests of the Intel. However, I'll just describe one machine to do svmotion below.

  Here's the problem:

  I'm trying to Svmotion via svmotion.pl - interactive, a Machine to Windows 2000 with a virtual disk and a virtual RDM. I am aware of the requirements for the RDM and required parameters for svmotion, independent is not selected for the RDM, and I also have svmotioned several machines linux and win2k3 with the same configuration without problem. In the interactive session, I choose to individually place the disks and I chose the virtual disk to only the virtual machine to be moved, essentially, as I saw it move vdisk virtual machine and then copy to the pointer of the RDM.

  The use of the processor in this machine is about 25% average. but I try to run migrations at the time the lowest. and The Host it itself shows only about 5.5 GB of the 16 GB of RAM used. so I think we're good on the RAM. the volume/datastore that I'm migrating from has 485 GB free and the volume/datastore I migration towards a 145 GB free. the VM virtual disk is only about 33 GB.

  I run the script the windows version of the RCLI svmotion. and when to begin the process, I get the following error at around 2 percent of the progress:

  "Since the server has encountered an error: a general error occurred: could not wait for the data."  Error bad0007. Invalid parameter. »

  After searching around, I found the following hotfixes to the U2 release notes

  • Migrate.PageInTimeoutResetOnProgress: Set the value to 1.

  • Migrate.PageInProgress: The value 30, if you get an error even after the setting of the Migrate.PageInTimeoutResetOnProgress variable.

  I've made these changes, and I still get the same error.

  When I dig in the newspaper, I see these entries in the journal of vmkwarning:

  (Feb 24 00:17:32 vmkernel iq-virt-c2-b6: 82:04:13:56.794 cpu4:1394) WARNING: bunch: 1397: migHeap0 already at its maximumSize bunch. Cannot extend.

  (Feb 24 00:17:32 vmkernel iq-virt-c2-b6: 82:04:13:56.794 cpu4:1394) WARNING: bunch: 1522: Heap_Align (migHeap0, 1030120338/1030120338 bytes, 4 align) failed.  calling: 0x988f61

  (Feb 24 00:17:32 vmkernel iq-virt-c2-b6: 82:04:13:56.794 cpu4:1394) WARNING: migrate: 1243: 1235452646235015: failure: out of memory (0xbad0014) @0x98da8b

  (Feb 24 00:17:32 vmkernel iq-virt-c2-b6: 82:04:13:56.794 cpu2:1395) WARNING: MigrateNet: 309: 1235452646235015: 5 - 0xa023818: sent only 4096 bytes of data in message 0: Broken pipe

  (Feb 24 00:17:32 vmkernel iq-virt-c2-b6: 82:04:13:56.794 cpu6:1396) WARNING: migrate: 1243: 1235452646235015: failed: Migration protocol error (0xbad003e) @0x98da8b

  (Feb 24 00:17:32 vmkernel iq-virt-c2-b6: 82:04:13:56.794 cpu2:1395) WARNING: migrate: 6776: 1235452646235015: could not send data for 56486: Broken pipe

  At this point, I'm stuck... What is Windows RCLI? the vcenter Server? or the service console with not enough of RAM? We have already increased all our consoles service 512 MB...

  Any help would be greatly appreciated...

  Thanks in advance.

  Alvin

  The vmkernel on out of memory error, I had that before. And vmware support recommends setting 800M Max service console memory. And I did it and have no problems after that.

  See if that helps the issue.

  Mike

• VISTA: backup application could not start due to an internal error: (0 x 80080005) Server execution failed

  The backup application could not start due to an internal error:
  Server execution failed (0 x 80080005)

  Vista Ultimate - trying to COMPLETE the backup of a computer

  Hi people,

  I had a similar problem with Vista (64-bit edition complete edition) machine. I run automatic backups for more than a year. Suddenly, backups started fail with the following error code:

  "The file or directory is corrupted and unreadable 0 x 80070570.

  I thought it would be my external drive - so I tried an another one - same error. After a search of different topics around, I tried various fixes (similar to above), but none of them worked.

  I managed to find the problem though. The issue is not with the drive being written - it's the current backup disc that is the problem. If you want to save your primary drive (C:, for example), try to perform a check of the errors on this drive (right click on your drive home, you are trying to save, choose 'Properties' then go to 'tools' - click 'Check now' under the control of errors - and check both boxes). Since this is the current drive, you must stop and restart - the system then automatically checks the system files and windows files on the next boot.

  After doing this, my problem cleared up. Apparently, the backup software was crashing trying to read a corrupted file or a sector of the hard disk, that he was backing.

• "The iPod could not be restored. An unknown error occurred (1433). »

  During an attempted - unsuccessfully - to restore an iPod Classic 160 GB end 2009 (model number A1238, 2173 EMC) model to its factory settings, I repeatedly met the following error message:

  "The '< name >' iPod could not be restored. An unknown error occurred (1433). »

  What can I do to fix this?

  Do the following If you find an error in the 1400 range when you restore or update iPod in iTunes - Apple Support

• Microsoft Outlook 2016 "could not read the calendar. Unknown error.

  iCloud version 5.1 Windows last 10 develop Outlook 2016 Dell XPS8300

  iCloud moved very well and without error messages. iCloud Contacts and reminders are OK, but when I access iCloud calendar I get this message: "could not read the calendar. Unknown error'

  Three facilities on other similar configuration PCs were flawless with every feature works perfectly.

  Have reinstalled Office 365 and iCloud 5.1 on affected PC several times with the same error when access iCloud calendar.

  Corrections and troubleshooting suggestions are most appreciated.

  Surprisingly, all that was necessary to solve this problem was to select the iCloud in 2016 Outlook tab and press the button refresh!

• Windows Update could not be installed due to the error 2149842967 (KB958559-x 86.msu)

  Hello
  I am trying to install Windows Virtual PC and Windows XP mode on my computer toshiba laptop. The compatibility tool h/w PC said that my PC is h/w support, assisted virtualization (BIOS and processor support for virtualization extensions).

  I installed Windows XP Mode.

  I am trying to install Windows Virtual PC on my Tablet RTM of Windows 7 Enterprise Edition 32 bit and it fails with below:
  Windows Update could not be installed due to the error 2149842967 "' (command line:""C:\WINDOWS\system32\wusa.exe" "C:\Users\vishalt\Downloads\Windows6.1-KB958559-x86.msu" ")
  
  I tried several options suggested as
  (a) restarts - did not work
  (b) netstop wuauserv, wicks, rename the softwaredistributionfolder, netstart these services (the two) and try windows complete update - windows update has started but I still couldn't install the KB958559
  (c) try cmdprompt in a high of UAC cmd window.

  I was wondering if there is something else that needs to be done to install this package KB.

  Thanks in advance
  Vishal-

  ... The link for Windows Module game and the registry size limit could not be tried because the links on these threads do not seem to work.

  I know. You will see that I asked a moderator to post a valid link for this thread.

  Have you seen http://social.technet.microsoft.com/Forums/en/w7itproappcompat/thread/61e16760-a500-481e-a90c-9b933f0fced8 ?

  I'll keep you posted if I hear anything new. ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• I want to uninstall this program but it says that it could not be removed because of the error, it is the program (/ Applications/exPressit H.E. 2.1/UninstallerData/Uninstall exPressit H.E. 2.1.app)

  I want to uninstall this program but it says that it could not be removed because of the error, it is the program (/ Applications/exPressit H.E. 2.1/UninstallerData/Uninstall exPressit H.E. 2.1.app)

  Hello

  What is the exact error you receive everything trying to uninstall this program?

  Try to Uninstall the program in a clean boot state.

  From your computer by using a minimal set of drivers and startup programs so that you can determine if a background program is interfering with your game or program. This type of boot is known as a "clean boot".

  Reference:

  How to configure Windows XP to start in a "clean boot" State
  http://support.Microsoft.com/kb/310353

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  1. click on start and then click Run.

  2. type msconfig and click OK.

  The System Configuration Utility dialog box appears.

  3. click on the tab general, click Normal Startup - load all services and device drivers and then click OK.

  4. When prompted, click on restart to restart the computer.

• Could not open windows live mail, message error 0 x 80004002

  Could not open windows live mail, message error 0 x 80004002 your calendar contains corrupt data that forcing windows live mail to close.  I have all the updates installed, drivers, etc.  Ran auditor of viruses and malware, nothing.  What is the problem?  Thank you, Charlotte

  Hello

  As you are facing problems with Windows Live Mail, I suggest you to report your application in the Windows Live Mail forums for assistance.

  http://www.windowslivehelp.com/product.aspx?ProductID=15

• "The phone"iphone"could not be restored. An unknown error occurred (6)"when I try to restore/sync my iphone to my itunes.

  RESET INTERNET PROTOCOL

  I'm following a convenience store from apple that I get this message:

  "The phone"iphone"could not be restored. An unknown error occurred (6).

  When I try to restore/sync my iphone to my itunes (first time I did it because it's a new phone - not new so I have no guarantee Apple).

  I have no problems with the internet, only the problem of the iphone/itunes. Reset the internet protocol allows, as says apple? It is not sensible, but if I decide to do, it will cause me problems internet, if in fact it wasn't the question in the first place?

  Thank you

  Hello CorZT

  Windows answers is not the appropriate forum for your question about Apple products. For the systematized with Apple and its products, please visit the link below.
  http://www.Apple.com/support/iPhone/