Could not reconnect all network drives in Vista...

Similar Questions

• Could not reconnect all network drives

  My laptop is getting the message "Could not reconnect all network drives", at startup. I'm running Windows XP, service pack 3. I have a 'Z' allocated network drive, which is marked 'memory_card '.

  Must this drive be connected?

  If so, what are the steps.

  When I try to open this network drive, I get the message "an error has occurred during reconnection 'Z' (: to \\HP(serial number) \memory_card'."

  Thank you

  All of this makes sense now.

  Thanks for your help and happy new year!

  C1

• message "Could not reconnect all network drives" is an error

  I am using windows 7 Home premium, with a small local LAN supporting 3 PC.  There are 2 stores connected to the network on the LAN for backup (a device) and multimedia data archives (the other device).

  Lately at the start, I always get the message "cannot re - connect all network drives", but explore can access the network drive and view the contents of files on this subject.  the following image illustrates this case:

  

  Note see the sharing Y: mapped drive that is not connected with a big red X, even though I can access the contents of the folder of this one (pictured above).

  So next, I selected Y: and properties and got the following picture for the reader (bomb box properties coming to slightly overlap the content of the file):

  

  Now it is said nothing in the drive capacity which should contribute to this (25% of space), but pointed out that only the action get properties has managed to change the y to so-called connection not connected (but still available) by a big X red, supposed to be connected, with a green sticker on the drive icon shows now.

  These 2 images were taken less than 3 minutes apart - the timer it took to snapshot screen not connected, crop the image to remove the spaces empty and save them, and then get the properties one and do the same thing.

  The question is - why windows do this?  It is obviously not something wrong with the devices, and even when it allegedly is 'not connected' the drive mapped a share can still provide content of records of levels 2 and 3 to the bottom of the tree.

  Davidk03

  Hello David,.

  You can see the article mentioned below to solve the problem.

  Drive mapped to the network connection may be lost

  http://support.Microsoft.com/kb/297684/en-us

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  Registry backup
  http://Windows.Microsoft.com/en-GB/Windows/back-up-registry#1TC=Windows-7

  I hope this helps. Otherwise, feel free to write us again for more assistance, and we will be happy to help you come.

• Could not find the network driver: PCI\VEN_14E & DEV_165F & SUBSYS_2133103C & REV_00

  I can't find a driver for a Proliant Server network:

  PCI\VEN_14E & DEV_165F & SUBSYS_2133103C & REV_00

  Hello:

  You are missing a character description of the seller.

  However, my guess is that you need the driver there is the Broadcom NetXtreme Gigabit Ethernet card which has an ID PCI\VEN_14E4 & DEV_165F.

  If HP does not list the driver on the support page for your particular model server, here is the link to the generic drivers of the BCM for this ethernet model.

  The first or the second pilot is probably one you need (32 or 64 bit depending on the case).

  http://www.Broadcom.com/support/Ethernet-NIC-NetXtreme-i-server

  You will need to manually install the driver, because I do not think that these are executable files.

• How to reconnect all network drives?

  the network location and the State of my network disks.
  It shows that wsusoffline.

  Hello

  The question you posted would be better suited to the TechNet community. Please visit the link below to find a community that will provide the support you want.

  http://social.technet.Microsoft.com/forums/en-us/winserverwsus/threads

  Hope this information is useful.

• on startup, I get the message, unable to connect to all network drives

  at startup I get message (unable to connect to all network drives) I use windows 7, intel i3, 64-bit and ie9.

  Hello

  Were there any changes (hardware or software) to the computer before the show?

  Method 1: Perform the steps from the link below and see if it helps.

  Programs may be unable to access some network locations after you turn on user account control in Windows Vista or in Windows 7

  Important:  This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs.

  For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  322756 (http://support.microsoft.com/kb/322756/)

  Method 2: Click on the link below and see if it solves the problem.

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-Networking/cannot-reconnect-all-network-drives/5c5a4492-1634-4479-91f9-b4d2763b31d2

  Hope this information helps.

• "Setup could not detect all the printers.

  I've recently set up a new computer and the network.  The host computer is running Vista.  I have connected a Deskjet 6940 via an ethernet cable into the Linksys router and can print from the host computer.

  I have a laptop which is under XP Pro, and who has a connection with the network.  I downloaded the driver from HP on the laptop to try to connect with the 6940, but during the install process, I get the message "Printer not found - Setup could not detect all the printers on the network."

  Firewalls on both computers is disabled.

  When I type the IP address in the address of the host computer or on the portable bar, I page of the printer, including its SSID.

  I tried to type the IP address in the field suitable for the installation of HP on the portable routine, however and always got the "printer not found."

  Ideas?  TIA

  The Deskjet 6940 being on the network, we will try to add the printer manually. Here is the sequence to XP:

  1. Click on the button 'Start'--> Printers and fax machines.
  2. Under print jobs, click on "Add Printer".
  3. Click 'Next' in the Add Printer Wizard window.
  4. Select " printer local to this computer. Deselect "automatically detect and install my Plug and play printer." Click "next".
  5. Under Select a printer Port option, select "Create a new port" and choose "Standard TCP/IP Port" and click "Next".
  6. In the "Welcome to the Add Standard TCP/IP printer port Wizard" make sure that the printer is turned on and connected to the same network that your computer is connected to. click on the button "next".
  7. Under "Add Standard TCP/IP printer Port", enter the host name of the printer . You can also use the IP address of the printer if it is static. Click 'Next' and then click 'Finish '.
  8. Now, select HP in the manufacturers list, select your printer from the printer model list and click the button "next".
  9. If you can't find your printer, you will need to find the installation CD and use the 'Disc' option to select one of the files hp*.ini. You can also select another model of the same type HP printer.
  10. Add the name of print spooler and click on "next".
  11. Click "next".
  12. Click "Next" and "Finish."

• Satellite A200 could not recognize the HARD drive during XP installation

  Hi all
  I need help with my laptop, please...

  My problem is,
  I have a notebook by Satellite A200, and the operating system is Vista, am not satisfied with Vista at all so I bought a Windows XP bootable CD... When I tried to install it it gave me a massage that he could not recognize my hard drive...

  I checked the Web from Toshiba site and downloaded the files from the storage for XP Manager as someone told me it could be the SATA problem and you must apply on your hard disk for XP will see it?

  The question is:
  How much is real?
  How can I install XP on my PC now?
  can I install Storage Manager while I'm on Vista and then install XP?
  I put the Storage Manager on a CD and boot from it?

  am really confused because when I extracted the Storage Manager and view the files I found the setup button and a few other folders, and I do not know what those to use because I don't know what is my hard drive... and any help will be much appreciated

  Thanking you a lot in advance

  Hi abu´s,

  Here´s a suggestion: Please use the search function in the forum because this subject has been discussed about 1000 times!

  Here´s a link to a thread were talking about installing XP on their machines with the need of the SATA drivers. Furthermore, it is important to doesn´t if you have a different machine, the procedure is always the same:

  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=26040

  Cheers and good luck

• Error 1606: 'could not access location network & AppData%.

  Please help with Error 1606, "could not access location network & APPDATA%\.»  Can someone please provide a fix?

  This problem occurs because there is incorrect entries in the Shell folder of the user who is logged on to Microsoft Windows. When Windows Installer goes to the sale of Shell folder of the user who is logged on to the computer, Windows Installer cannot locate the correct entry. The solution is inhttp://support.microsoft.com/default.aspx/kb/886549.

  The steps to correct this problem involve editing the Windows registry.  Change the settings of the REGISTRY can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the REGISTRY settings configuration can be solved. Changes to these settings are at your own risk. I suggest that you first back up your registry as follows: http://windows.microsoft.com/en-US/windows-vista/Back-up-the-registry.

  Here are the steps to fix it.

  1. click on start, run, typeregedit in the Open box, and then click OK.

  2. look for the following registry key:

  HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\User Shell dossiers\

  3 remove the entries that show the path that is listed in the error message.

  886549 KBhttp://support.microsoft.com/default.aspx/kb/886549: Regedit open again. In the left pane, click User Shell Folders, point tonew, click expandable string value, type the value name that you want to restore (AppData) and then press ENTER. Right click on this value, clickchange, type the value in the value data for the value name box, and then clickOK. The value data must be: % USERPROFILE%\AppData\Roaming.

  Step 8 KB 886549 suggests that you also check the values in HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Explorer\User Shell Folders. However, by fixing my problem, I had not to change values in the registry key. If this does not work, follow ALL the steps in the referenced article.

  Good luck. Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Setup could not find all of the products available for installation. Windows Update suggests to install 125KO Office 2007 SP1 repeatedly.

  Hello!
  Update for Windows Vista x 64 to Windows 7 x 64 caused the following errors:
  By clicking on the "Edit" button in "Programs and features" with Office 2007 trial selected gives an error "Setup error".
  Setup could not find all of the products available for installation. Please contact your systm administrator. "in Windows 7 x 64. Run the installation of Office 2007 trial version downloaded the file to change the components OK works.
  How to operate the button "Edit"?
  Windows Update suggests to install 125KO Office 2007 SP1 repeatedly. I agree to install each time, updates installs "successfully", but suggest Windows Update to install next time. It started to happen after uninstallation and reinstallation of Office 2007.
  Kind regards
  Dima

  125 KB is obviously not a ServicePack because this would be much MB in size, you have a number of KB (knowledge base) to go with the annoying update?

  How to use a Setup log file to troubleshoot installation in Office
  http://support.Microsoft.com/default.aspx/KB/826511

  How to read the Windowsupdate.log file
  http://support.Microsoft.com/kb/902093#appliesTo

  Try running ChkDsk to check your drive for errors. Right click on your drive icon / properties / tools / error checking.  Try first by checking do not each box (that it will run in read-only mode) to see if it reports any problems file or hard drive.  If so, restart it by checking both boxes and restart to allow him to attempt to fix any problems found.

  As for the "Changes" problem that I have no real solution for this, only that you remove every bit of desktop of your machine and everything don't reinstall desktop applications you need.  It could be a corrupted registry which is behind this problem.

• LabVIEW can not detect the network drive so that other applications can.

  All network drives are mapped correctly and another application such as micro soft office or windows explore can see the correct mapping LabVIEW can not see the mapping? No idea how to solve this problem?

  -VS

  The solution: Add EnabledLinkedConnections to the registry

  https://TechNet.Microsoft.com/en-us/library/ee844140 (v = ws.10) .aspx

• Storage migration fails with the error: could not complete the network copy to path to the file

  Hello

  I have two hosts ESXi 5.5 with local storage and VMware vCenter device which manage them. Everything worked well until that time.

  Now when I try to make the host migration and storage, processing or power off the virtual machine, I get the error message:

  Could not complete the network for file /vmfs/volumes/.../path/to/file.vmdk copy

  The situation is the same when I try to deploy VM on ESXi-2 model that is on ESXi-1.

  All with the network configuration is correct. I have ping between the hosts on ESXi and ESXi and vCenter. No firewall hosts ESXi and vcenter. No physical firewall between hosts.

  The network latency is less than 1 ms. No packet loss.

  I read this VMware KB article: Storage migration fails with the error: could not complete network file copy and I tried solutions explained here, but the results are the same.

  You have ideas where the problem may be?

  Hello guys,.

  I finally found the problem.

  ESXi servers are configured with MTU 9000, but the switch where the hosts are connected was a bug documented with frames. I found the problem after finding this article http://kb.vmware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalId=1003734

  I run the command of ESXi-1:

  vmkping - d-s 8972 192.168.10.12 where 192.168.10.12 is the ip address of ESXi-2

  The result was:

  3 packets transmitted, 0 packets received, 100% packet loss

  as a workaround, I reduce the MTU to 1500, then I patched the problematic switch.

• Could not initialize all required WMI Classes

  My programs that rely on WMI function do not work properly. When I checked the WMI settings (went to Device Manager > WMI Control > properties), I get the following error:

  Could not initialize all required WMI classes.
  
  
  Win32_Processor: Win32: the system cannot find the specified file.
  Win32_WMISetting: success
  Security information: success
  Win32_OperatingSystem: The system cannot find the specified file.
  I already tried to re-enroll the WMI, but that doesn't seem to do the trick. I also confirmed that the processor appears in Device Manager. Any thoughts? Any help would be appreciated.

  Hi Mattabedi,

  Thanks for posting your query in the Microsoft Community Forums.

  Help me with more information.

  1 are. what program you referring?

  2 is specific to the program the issue?

  You can run WMIdiag tool and check if it helps.

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=7684

  See also:

  http://msdn.Microsoft.com/en-us/library/aa394603 (vs.85) .aspx

  It will be useful.

  Let us know if you encounter problems under windows in the future. We will be happy to help you.

• Boot failure: REM could not detect 2 hard drives

  Hello. I bought a HP Pavilion G6 series laptop (LX273EA #ABU) last year and he stopped to load correctly. When I click on "Repair (recommended)" I get an error messaqe saying "REM could not detect 2 hard drives. I tried to start in safe mode and it will not work.

  The laptop is two months out of warranty, and the only support option I found is a phone call from £30 with no guarantee of assistance. Any input would be appreciated.

  Thank you

  Michael McDonald

  You are welcome Michaelmcd85.

  The 305 error indicates that the hard drive has failed. You will need to replace the hard drive.

  This is an easy repair so I'll give you the information you need to fix yourself. It's your interview Guide &. It contains information on how to disassemble the laptop. The guide also contains information that will allow you to choose a replacement hard drive.

  If you do not want to repair the laptop you can contact HP Support directly to the 1-800-4474-6836 if you are in the USA / Canada. If you are in another country, you must first visit HP's Support around the world to find the coordinates for your region.

  I hope this information is useful.

• accidentally not uninstalled the network driver no internet network card. Windows Vista, suggest how to fix it?

  I accidentally uninstalled my network driver and now my computer says I don't have a network card and it does not connect to the internet. I currently use a windows vista, can anyone please suggest how to fix it?

  I accidentally uninstalled my network driver and now my computer says I don't have a network card and it does not connect to the internet. I currently use a windows vista, can anyone please suggest how to fix it?

  Hey Femi92

  I suggest that you use a friends computer to go to your computer manufacturers website and search for your model number for the network vista drivers

  Download and save to drive flash and then reinstall them using your computer

  Voila

  Walter, the time zone traveller