Device driver software was not successfully installed

Similar Questions

• MDR-ZX750BN - device driver software was not successfully installed

  Here my problem, I go to my bluetooth to add a device I turn my headset on "MDR-ZX750BN" it detects and so I add it starts to install the device drivers but then and I encounter the message "device driver software was installed correctly. Now, I tried to man to try and fix this problem, so I hope someone here can help know me fix the. I think it has something to do with the drivers not being do not or are not planned to install the good. I just need to know how to fix it. I'll be very grateful to anyone who can help me with this problem. Thank you.

  Hello Eric,

  Thanks for posting your query on Microsoft Community forum.

  When you connect a new device to your computer, Windows tries to install it for you automatically, and will notify you if a driver for the device is not found. There are several things you can try if this happens:

  I suggest you try the steps in the following article.

  What to do when a device is not installed correctly

  Get back to us with the result of the steps so that we can help you further.

  Kind regards.

• Try to install USB hub, error: device driver software was not successfully installed. Please consult the manufacturer of your device to help get this device installed.

  Software device driver has not been installed successfully. Please consult the manufacturer of your device to help get this device installed.

  Failed. Generic USB hub.  I went to the Device Manager and clicked on update, but it did not work. Can you help me.

  original title: DEVICE DRIVER has NOT been INSTALLED successfully.

  Go to your computer manufacturer's support web site and search for the Windows Vista drivers for your specific model number.

  If there are drivers Windows Vista, then to download to a folder on your hard drive and install all of them, in starting with the card mother/chipset drivers SATA, LAN, Audio, USB, Etc., and so on.

  List of computer manufacturer support sites:
  http://Windows.Microsoft.com/en-us/Windows/help/contact-support/computer-manufacturers

  If you have an Intel motherboard, you can try the Intel driver update utility: http://www.intel.com/support/detect.htm?iid=dc_iduu

  Tips for solving common driver problems
  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-fixing-common-driver-problems

  Graphics/video drivers:
  Check the download site of the manufacture of the graphics card for the latest Windows 7 / Vista drivers for your card.
  ATI: http://support.amd.com/us/gpudownload/Pages/index.aspx
  NVIDIA: http://www.nvidia.com/Download/index5.aspx?lang=en-us

  J W Stuart: http://www.pagestart.com

• We get an error "Device driver software has not been installed successfully" when installing Microsoft LifeCam HD-3000

  * Original title: does not always

  There is a windows 8 there, but I'm trying to download it right now and a red Tin can that appear when it comes to the end and when I click on continue anyway, it restarts just install it?

  Just at the moment where I thought that he had finally worked as he said completing the installation to have fun and enjoy, when I click on finish, that's what I get on my screen "device driver software was not properly installed" the with next to "Microsoft LifeCam HD-3000", he says has failed. ". The LifeCam shortcut on my desktop now will not open.

  Hi Rachel,

  Thank you for your response.

  I suggest you to contact the Microsoft Hardware support for assistance on this issue.

  http://www.Microsoft.com/hardware/en-CA/support/contact-us

  It will be useful.

• device driver software was not installed with success-vista

  I have a hp vista computer and recently, I had the computer have a weird blue screen when he started upward. The blue screen would not go away, and then once it has started to do a windows update automatically. Since this update my drivers usb and cd/dvd player will not work. I tried to uninstall them and restart the computer and on any other thing, I have seen online about this. When I plug something into the port, it shows that something is there, but the window that will normally pop up does not work. Can anyone help me please with this problem?

  Hello

  Try to follow this link.

  A device driver is not installed or a hardware device does not work correctly after you install a Service Pack for Windows Vista

  http://support.Microsoft.com/kb/948187

  Refer.

  Install a USB device: http://windows.microsoft.com/en-us/windows-vista/Install-a-USB-device

  I hope this helps.

• Device driver software was not installed___ TSSTcorp DVD +-RW TS - L632H ATA Device

  My CD drive disappeared. I ran the Microsoft Fix It tool, and he said he solved the problem, but he also says that the software device driver has not been installed successfully.

  The Fix - It tool tried to download the device driver, but it says that it failed. Is there anyway that I can get this device driver that I am able to use my CD-Rom drive again?

  Hello

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  ------------------------------------------------------

  After the foregoing:

  Step 1: Please make all underneath the same if you've done it before as it's often the total of the process which
  solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double-click on the device - driver tab - click
  Update the drivers (this will probably do nothing) - then RIGHT click the drive - UNINSTALL - REBOOT
  This will refresh the default driver stack. Even if the reader does not appear to continue below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a loose cable or
  slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during the installation of Windows Vista after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD burning and)
  Playback of CD and DVD). Therefore, it is not unusual for 1 or 2 rooms with not so work that others do it properly.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are some registry entries
  that the troubleshooter does not, and those who "could" be the cause.

  Check with your system manufacturer Maker and device for possible firmware updates and the good
  Your player registry entries.

  Here are the keys in my opinion, are those in question - for the reader of CD/DVD subkeys of course that he will be
  other subkeys in these keys. Be sure to ask specific keys involved as well as the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even registry settings correct for your CD/DVD drive
  a person with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• Peripheral USB MTP are impossible to install. Error: «device driver has been not correctly installed...» Code 31 ".

  I tried almost every answer nothing is done online.

  Both my Canon T1i and my Nexus 7 Tablet does not connect to my office. Raise them the same error message: device driver has not been installed with success, usually with the error "code 31". My laptop has no problem to connect to two devices, and both are on Windows 7. All USB devices non - MTP, as devices and thin USB drives work.
  I tried to uninstall/reinstall device drivers, as well as my host USB in Device Manager. I also looked in the upperfilters registry, but they aren't there. I don't know if it's important, but my Windows operating system is on a different drive than my account "User". I am very close to reinstall my computer.
   
  Original title: any = s MTP USB device failed to install

  Sorry, I'm impatient and re-formatted by the operating system. Works fine now, if it happens again, or determine the cause, that I re-post.

• USB Mass storage device drivers software has not been installed successfully

  Auto install usb drivers fail

  Hello

  * You are able to get USB devices working in one of your USB ports?

  In addition, please see the following link for steps on how to perform a clean boot on your system to see if this clears this can cause this problem.
  Here is the article that lists the steps to perform a clean boot on your system:
  http://support.Microsoft.com/kb/929135

  Post back and let us know what you are able to find out by performing a clean boot on your system and if all your drivers are up to date and up to date.

  Kind regards
  Clement Kumar. Microsoft Answers Support Engineer. Visit our Microsoft answers feedback Forum and let us know what you think.

• Microsoft ISATAP adapter #28 (device driver software installation problems)

  Hi all:

  Just started getting the following error when I start first in regard to Microsoft ISATAP adapter #28:

  Device driver software was not successfully installed

  Please consult the manufacturer of your device to help get this device installed.

  I'm totally familiar with this device and as a result, I'm not sure what relevance with regard to my OS.  What I need to download and install a special driver manually, or should I just ignore the error message above?  Care of my system:

  CPU:  Intel Core i7 - 4770 K CPU @ 3.50 GHz

  GPU:  EVGA GeForce GTX 770 (last WHQL Logo'd driver installed)

  RAM:  Corsair Vengeance DDR3 1866 MHz (running at 1600 MHz) DRAM Pro

  OS:  Windows 7 Professional 64-bit (6.1, Build 7601) Service Pack 1 (7601.win7sp1_ldr.160408 - 2045)

  Any help would be greatly appreciated.  Thanks in advance!

  Hello

  Peripheral Microsoft ISATAP Inter Site Automatic Tunneling Address Protocol is used to help the transition to an IPv6 infrastructure companies. T he card ISATAP encapsulates IPv6 packets using an IPv4 header. This feature allows the customer to carry IPv6 traffic over an IPv4 infrastructure. This approach allows organizations to migrate slowly to an IPv6 infrastructure without having to spend too much time and financial resources to convert the new infrastructure.

  This means that the Microsoft ISATAP device driver is an update which is specifically designed to connect to the network. This driver is not a requirement for your operating system. It's an extra update for a better network functionality. If your internet connection works fine, then you can ignore this driver. Otherwise, follow the solution below to solve this problem.

  Here are the steps you can try:

  1. follow the steps on this link to update the driver: update a hardware driver that is not working properly.

  2. run the troubleshooting of autopilot: hardware devices do not work or are not detected in Windows.

  3 try to uninstall and reinstall the driver.

  To uninstall:

  1. Click Startand then click Control Panel.
  2. Click hardware and sound.
  3. Click on Device Manager.
  4. Double-click the type of device you want to uninstall.
  5. Right-click on the desired specific device, and then click Uninstall. You can also double-click on the device and then on the driver tab, click Uninstall.
  6. Click OK to complete the uninstall. (Restart your computer so that the changes take effect).

  To reinstall:

  1. Open Windows Update by clicking the Start button. In the search box, type Update, and then in the list of results, click Windows Update.
  2. In the left pane, click check for updates. If there are any available updates, click the links to see more information about each update. Windows Update tells you if an update is important, recommended, or optional. Each type of update might include drivers.
  3. On the Select the updates you want to install page, look for updates for your hardware devices, select the check box for each driver you want to install and then click OK. There could be no available driver updates.
  4. On the Windows Update page, click install updates. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation. Windows Update will tell you if the updates have been installed correctly.

  Let us know how it goes.

  Thank you.

• Get the error message: "driver software was installed correctly" and failed to get the Samsung Galaxy S to connect to my computer.

  Original title: Samsung Galaxy S

  Cannot connect Samsung galaxy s to computer says software driver has not been installed successfully

  Original title: UBS connection I can't get my samsung galaxy s to connect to my computer, it keeps giving me an error message that says the driver software was not successfully installed

  Previous page Next Page

  Hi Jeehadave,

  1 have you tried the steps by Sandeep GNT replied on March 13, 2013?

  2. you receive the specific error codes with the message?

  Usually after installing the Samsung Kies software, you will be able to connect the Samsung Galaxy with Windows.

  Samsung provides the Kies software to communicate with Windows.

  You can try to connect to another USB port and check if it helps.

  If the problem persists even after installing the Samsung's Kies software, then you must get in touch with support from Samsung to get help.

  Hope the helps of information.

• Windows was able to successfully install device driver software, but the driver has encountered a problem when he tried to run. The problem code is 43.

  Windows was able to successfully install device driver software, but the driver has encountered a problem when he tried to run. The problem code is 43.

  Signature of the problem:
  Problem event name: PnPDeviceProblemCode
  Architecture: x 86
  Hardware ID: PCI\VEN_10DE & DEV_0428 & SUBSYS_110B1734 & REV_A1
  Configure the class GUID: {4d36e968-e325-11ce-bfc1-08002be10318}
  PnP problem code: 0000002B
  Driver name: nvlddmkm.sys
  Driver version: 8.17.13.142
  Driver date: 15/05/2012
  OS version: 6.0.6001.2.1.0.768.2
  Locale ID: 1033

  Hi, Senga,

  Start > right click on computer

  Select manage

  Click on continue in the UAC window

  Click on Device Manager

  Click on the + sign next to the device

  Right click on driver and select rollback

  If the cancellation is dimmed, select uninstall

  Close Device Manager

  Back to zero computer and Windows will reinstall the driver

  Go to the manufacturer website, download the updated driver to update and save it to the desktop

  Double-click the .exe file to install

  You can also try booting in safe mode with network.  Download the following tool and run a scan complete to rule out malware.

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=16

• Problems installing Windows 7 64-bit SP1: "The Installation was not successful" DS_S_SUCCESS (0x0)

  I'm unable to install the Windows 7 SP1 on my laptop.  I am running Win 7 64 bit and tried to install the 64-bit SP1 via the feature updates automatic first, then with the SP1 download manually (Windows6. 1 - KB976932 - X 64 .exe).   The progresses to install SP1 to the point where it shuts down the system and it is charging but when I log in I get the dialog Setup SP1 reporting "the Installation was not successful".  By clicking on the link error display shows DS_S_SUCCESS (0x0).

  (I followed the steps of troubleshooting 1) by using the Troubleshoot Utility "Difficulty of problems with Windows Update" and 2) installed tool Rediness of updating system, but the installation of SP1 still fails with the same error.

  I have successfully applied the SP1 on a different system.  No idea why I have problems with my laptop.

  Any ideas?

  C thx.

  Have you checked your hard drive to find errors? Another obscure, you might try is to disable User Account Control temporarily.

  Its possible, you need to perform an update of the BIOS if one is available for your ThinkPad T60p. Also, check the updated chipset drivers.

  Furthermore, disconnect any non-essential device, you may have attached to the system.

  Its possible the SP1 download may be corrupted, I would like to download another copy and try again.

  Releasing it's easy: with Windows | ActiveWin | Laptops | Microsoft MVP

• Photosmart Premium C309-g: the drivers and the printer software will not be installed.

  My network all-in-one Photosmart Premium C309-g worked very well on my desk until recently, when suddenly the HP software could still see and connect to the printer, but Windows 10 could not. I tried to remove the printer and uninstall all associated software, then tried to reinstall the software. Unfortunately, the installation will not get to the point where it starts and then suddenly disappears with no trace of her still running in the background. I can deviate from the default installation and bring to the top of the page to select the components that I want to install, but when I do the button 'ok' on this page does not work. No matter how many times I click on it, the page remains open and the installation will not so fast. If I click Cancel on this page, it disappears and the installation back to the previous page, where I can choose to continue and happen almost immediately out of sight again. This happens whenever I try to install selected software and drivers. I deleted the printer from the devices page in the Panel, I made sure to this it is not is more listed in the Manager of peripheral devices (printers and imaging devices), I removed the Windows 10 print queue and I deleted all the data of the folder under the Program Files (x 86) HP folder on my hard drive. I also disabled Windows Defender and run the installer as administrator, yet none of these steps help the process at all. I have never, in my 20 + years using nothing other than printers HP, encountered a problem like this. I'm used to receive error messages during the installation of software to fail, but I have never had a process simply disappear from the computer without leaving any trace of never having run. I hope that someone out there has an idea, that I have not thought yet, transferring files to my tablet to print from becomes a pain in the rear.

  A man who took the freedom of another man is a prisoner of hatred, he is locked behind bars of prejudices and narrow-mindedness. I am not truly free if I take freedom away from someone else, as surely as I am not free when my freedom is taken from me. The oppressed and the oppressor similar are stripped of their humanity.
  ~ Nelson Mandela

  Welcome to the HP Forums @GarfieldFan1969,

  I understand the printing software will not fully installed for your Photosmart C309 on your system Windows 10, and I wanted to answer with my suggestions for trying to help! Here are my suggestions for you to try. When you are finished, please let me know the results and problems or errors that you may encounter!

  First step: clean boot, restart the PC and try the install again.

  1. start by typing "msconfig" in the search box of Cortana, and then click MSConfig (run command)
  On your keyboard press Windows + R key at same time and type Msconfig in the run window, and then click OK or press ENTER.

  2. now, choose Selective startup

  3. Remove the check of the Load Startup items

  4. click on the Services tab

  5. check "hide all Microsoft Services" and then click on disable all

  6. click apply , then OK

  7 restart the PC and temporarily disable firewalls or antivirus programs

  8 run the Installation Wizard for Windows HP printer to install the printer

  9 turn on the firewall and start services

  Second step: you unregister and re-register the Windows Installer Service:

  1. hold down the Windows key + R to fill the box "Run" and type cmd.exe, and then click OK.
  2. at the command prompt, type msiexec /Unregister , and then press ENTER.
  3. at the command prompt, type msiexec/regserver, and then press ENTER.
  4. at the command prompt, type exit and press ENTER to close the command prompt.
  5. run the Wizard for Windows HP printer installation

  Step 3: run System File Checker Scan (up to 3 times) to repair the corrupted system files:
  1. go to start
  2. type CMD
  3 right-click and run as administrator
  4. to check and repair the OS type sfc/scannow (note the space between sfc and ' / ')

  You may need to run this upward to 3 times to solve all the problems

  When finished, it will say one of three things
  Windows did not find any breach of integrity (a good thing)
  Windows resource protection found corrupt files and repair the (good)
  Windows resource protection found corrupt files but was unable to fix some (or all) of them (not a good thing)

  Try to reinstall the printer.

  Step 4: activate the built-in Windows administrator account

  source

  1. first of all, you'll need to open an administrator mode command prompt by right-clicking and choosing "run as Administrator" (or use the shortcut Ctrl + Shift + Enter in the search box).

  Note that it works the same in all versions of Windows. It just search for cmd and then do a right-click on the icon of the command prompt in the start menu or the boot screen.

  

  2. If you are in Windows 8.x or 10 you can click on the Start button and choose to open a command prompt in this way.

  

  3. now type the following command:

  NET user administrator / Active: Yes

  

  4. you should see a message that the command completed successfully. Log out, and you will now see the administrator as a choice account.

  (Note that this screenshot is for Vista, but it works on Windows 7 and Windows 8 and Windows 10)

  

  You will notice that there is no password for this account, so if you want to leave it enabled, you must change the password.

  Try to reinstall the printer.

  

  Testify of my answer by hitting the thumbs to the top slot

  Click on the button "Accept as Solution" if I helped you reach a solution.

• The operation of e/s specified on Device\Harddisk2\DR4 was not completed before the expiry of the time-out period

  The operation of e/s specified on Device\Harddisk2\DR4 was not completed before the expiry of the time-out period

  I did no changes on my computer for functionality, commissioning due to above mentioned problem goes & long

  Hi KarlMaskery,

  1. When you receive the error message?

  2. you have any external hard drive connected to the computer?

  3. do you have security software installed on the computer?

  4 when was the last time it was working fine?

  It is possible that some third-party programs installed on the computer is causing the problem.

  I suggest that you put the computer in a clean boot state and check if it helps.

  To help resolve the error and other messages, you can start Windows XP by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  See the link below to learn more about how to clean boot.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  (a) click Start, type msconfig in the search box and press ENTER.

  (b) If you are prompted for an administrator password or for confirmation, type your password or click on continue.

  (c) under the general tab, click the Normal startup option, and then click OK.

  (d) when you are prompted to restart the computer, click on restart.

• Windows installation was not successful. Your previous version of Windows is being restored. Do not restart your computer during this time.

  Windows installation was not successful. Your previous version of Windows is being restored. Do not restart your computer during this time.     I have a small Toshiba laptop which has installed Windows 7.  I uninstalled my Norton (that I was instructed to do so by a friend); tried to reinstall Windows 8; and got the same message.  Any suggestions?

  Hi Dreah117,

  Thanks for choosing Windows 8!

  I understand that you get this error trying to upgrade to Windows 8. Its good that
  you have removed your anti-virus software are there is a possiblity of it
  causing problems with installation

  I have a few questions about your system

  1. what operating system (OS) you upgrade?
  2 what is a 32 or 64 bit OS?
  3. you try to install a 32-bit or 64-bit of Windows 8?

  You can try these methods to see if it solves the problem

  Method 1:
  Run the upgrade wizard and check to see if your system is compliant with the minimum requuirements.

  http://Windows.Microsoft.com/en-us/Windows-8/upgrade-to-Windows-8

  Method 2:
  Disable or uninstall a software such as CD/DVD burning utility or third-party disk utility to defragment programs such as perfect disk / Daemon Tools

  (a) in the notification area, next to the time looking for icons of software disk utility

  (b) pass the mouse over it to check the name

  (c) right-click on the icon and select "Exit/Disable" or a similar option.

  Method 3:
  Make sure your computer is updated through Windows Update.

  http://Windows.Microsoft.com/en-us/Windows7/products/features/Windows-Update

  Method 4:

  Disconnect all unnecessary external devices such as printers / joysticks etc.

  Method 5:
  Put the computer to boot is a way to solve problems

  http://support.Microsoft.com/kb/929135

  Note: Please follow step 3 on the link if upgradation fails to return your system to a normal startup.

  We know what's going on and if we can be of any other assistance.