Could not open after upgrade to Yosemite After Effects

Similar Questions

• After Effects CS6 does not open: "after effects warning: an unknown Adobe Player Engine error has occurred." Scripting is disabled. »

  I erased my computer but I managed to get After Effects CS6 return looking in Windows old on my hard drive, every time I try and open AAE I get this error message "after effects warning: an unknown Adobe Player Engine error has occurred." Scripting is disabled. »

  What should I do?

  Thank you.

  He started after this error message?

  Is what version of CS6? 11.0.4? If this is not the case, try to update to it.

  Why not just reinstall from your original disc or download?

• Could not launch After Effects

  When I run the EI is the error message I get:

  "

  After that the effects cannot continue: error when access to the files instead of inside "/Users/ < username > / Library/Preferences/Adobe/After Effects/13.8", please check the file permissions and try again.' "

  I checked on my mac and this path does not exist.

  You must hold down the Alt/Option key when the menu go to finder is selected to go to the library.

• Could not find After Effects on cloud creative Installer

  Downloaded and implemented Creative Cloud Installer found photoshop, illustrator and others, except After Effects.

  Anyone who knows how to download After Effects test?

  T_T

  After Effects is not available for 32-bit operating systems. See the system requirements: system requirements | After Effects

• Problem when filtering creative cloud desktop application: could not find after effects CC (12) version

  I need to export a CC project (2014) After Effects CS5.
  I kept the CC version (12) but now I need after effects CC (12) in order to save the project to the CS6.

  If I have the filter by 'all versions' or 'audio/video' I see after effects CC (2014) but if I filter by "previous versions" I see only Edge animate CC and Gaming SDK

  No way to see after effects CC (12)!

  Maybe because I use the Italian version of the creative cloud? I don't understand how to change the language of creative cloud, if I change the language in English (in the preferences / applications tab) this affects only the language of the downloaded apps, not the creative cloud itself... During the installation of the creative cloud, there isn't any choice to select a language...

  Why a simple thing like this makes it difficult...

  

  

  Hello

  Use this link to update your application.

  Adobe After Effects: For Macintosh: update Adobe after effects CC (12.2.1)

  Thank you

  Arjun

• I am trying to install a scanner treated after installation failed previously and I get the message "Could not open key".

  Could not open key

  How can I give me access to a registry key?  I am trying to install a scanner treated after installation failed previously and I get message "could not open key: UNKNOWN\Components\AFlE7E2767BA2BB41B713A00FB8FACC4\4D7CB2A83D7A5D543B2D9374815CC314.» Verify that you have sufficient access to that key...

  Click Start, type: regedit

  Click with the right button on regedit

  Click on run as administrator

  Make sure that you back up your Windows registry database before you try:

  How to make a backup of the registry in Windows 7
  http://Windows.Microsoft.com/en-us/Windows7/back-up-the-registry

• Adobe Reader could not open my file after trying to print

  I tried to print my Quicken tax report, but Adobe Reader could not open.  What should I do?

  Hi ginak38772402,

  Please refer to this document KB PDF error after 10.1.5 - 11.0.01 update, Adobe Acrobat X and XI.

  Kind regards
  Nicos

• After typing password password protected document (ABSA) I get the following message: "Adobe Reader could not open 'index.html' because it is not a type of file supported or because the file has been corrupted (for example, he was sent as an email.

  After typing password password protected document (ABSA) I get the following message: "Adobe Reader could not open 'index.html' because it is not a supported file type or because the file has been damaged (for example, it was sent as an attachment to e-mail and has not been correctly decoded)" when I send the attachment to my husband that he can open it.  P

  Hi idwa,.

  As I mentioned this file must be opened with the correct application. You will get the best understanding of your problem on this forum link: what is required to read the files .emc of ABSA bank

  Kind regards

  Ajlan Huda

• Firefox does not open after upgrade

  I tried to open firefox and the update message appeared and thenfire fox did not open after so far, I tried to reinstall and that no longer works. I have uninstall before reinstalling

  The problem is that Prevx 3.0, uninstalled, now works fine! Thank you

• Error message: Windows could not open possibly due to a hardware or software upgrade with a black screen and white on Windows XP starts.

  Original title: suddenly Windows XP does not open

  After using the computer someday, he would not start the next time I lit. Windows tried to start but failed and went to a black and white screen saying windows could not open possibly due to a hardware or software upgrade and invites me to try opening windows normally, safe mode, using the last well-known congig, etc... Every choice has ended up doing the same thing, windows tries to start and end up back in the black and white screen.

  Hi Brian,.

  1. you receive messages or error codes?

  2. did you of recent changes on the system?

  You can read the following article and check if it helps.

  Computer stops responding with a black screen when you start Windows XP

  Black screen on startup

  Hope this information is useful.

• Windows could not start after activating the boot.

  Hi all

  I have a very serious problem.

  A few lost technology from Microsoft asked that I have to do the following:

  http://support.Microsoft.com/kb/929135.

  Immediately after the restart, I was confronted with the following message:

  Windows could not start.

  Status: 0xc000000e

  Info: A required device is not connected or is not accessible.

  Startup Repair does not work. -Root cause found: the partition table has not a Sys component validates.

  System Restore does not work - the system cannot find the specified file (0 x 80070002)

  Bootrec - rebuildbcd works no item was not found.

  Bootcfg does not work - could not open the TRUNK. INI file.

  Bcdedit does not work - the requested system device cannot be found.

  GParted does not work - cannot load the ntfs module: invalid argument.

  How can it be fixed, please?

  It is an extremely urgent situation which must be resolved immediately, because I use this computer for work and need to return to work on a large commercial project Monday. Forget the original question that MS tech was trying to 'help' with, everything what I need now is to be able to get into Windows, or even just make this record available and accessible on the LAN computer.

  Hi all, thank you for the advice.

  Problem has been resolved after a cold start.

• My InDesign CS6 does not open after expiration of CC 15 day trial.

  My InDesign CS6 does not open after expiration of CC 15 day trial. The only option is to subscribe to the CC. I don't want to subscribe, I want to use my copy of the CS6. I uninstalled and reinstalled ~ no still no chance.  Anyone know how to open it?

  If you have installed cs6 install the subscription, it will capture your license CS6. Common sense would have been to disable CS6 before install CC as CS6 contains its own (and better kind) CS6 software with more upgrades and possibilities than the old version in a box.

  If you can not install CS6 with your own serial number for this reason, you will need to contact Adobe to reset the activations.

• Adobe Premiere Elements does not open after installation

  Hello

  
  I've written before last week. I bought Adobe Photoshop elements 11 and Adobe Premiere elements 11.

  I had a trial version of Photoshop elements 11 and with the code I could access the full version.

  
  However, Premiere Elements did not open after installation. I have a trial version, so I downloaded the full program. I went through the installation process and everything seemed ok, no error message. But when I tried to open Adobe Premiere Elements after you restart the computer, it did not open at all. Nothing happened.
  I uninstalled and reinstalled the program for a couple of times over and over again, but no result. Also tried to download the free trial first, and also it does not work. I checked my Quicktime and updated to the latest version.

  I use a Windows laptop: Asus Intel Core i5 - 2430M, 2.4 GHz
  I hope you can help me!

  Thank you!

  Inge

  Have you seen the answer you received in post http://forums.adobe.com/thread/1226832 your course from last week ?

• .bat file changed in an .exe file that opens a file linked to the main program does not open after packed

  Here's what's happening.

  I have an add on package I wanted to pack with a main program.  The problem is that the add-on is not an .exe file so I had to make a .bat file to open it, which, unfortunately, is not recognized as a user entry point.   So I converted the file .bat to .exe file so that I could create a user to this file entry point.

  It is a situation similar to opening a word document and it will automatically open Microsoft word.  Only in my case I create a batch file for this word document and then convert it into a .exe file so I could create a user for this document entry point.

  So in my case after it's all packed to the top and I run the user entry point, I get an error could not open file.  Is that what I would call a linked file?  I'm packing up under copy writing/isolation mode and not in merged mode.

  Any ideas?

  Hi Christopher2222,

  In most cases, you won't need to run the application during the capture process. In some scenarios it will probably a solution to set some values "first round" for an application.

  In this case, you try to start a batch (bat) file. All Thinstall/ThinApp scenarios with a bat file to add this to your package.ini

  giveitaname.exe

  Source=%SystemSystem%\cmd.exe

  Shortcut = YourPackageContainer.dat

  CommandLine=%SystemSystem%\cmd.exe/k C:\PathToYourBatchFile\start.bat OptionalParameter1 OptionalParameter2

  The UNC path is not recommended.

  Best regards

  Christian Janssen

  CIS - Group.nl - VMware and Thinstall partner

• Firefox does not open after the update. Cannot open the profile technical, even when you use the directory in cmd line path

  I'm using Firefox on a Windows 7 computer. Firefox does not open after the last update. I read the help articles and it seems that I need to create a new profile because my settings were probably corrupted. I'm unable to open the profile technical, even when you use the directory in cmd line path. I tried the following commands in the command line:

  Firefox Pei
  "C:\Program Files (x 86) \Mozilla" PEI

  Nothing happens with every order.

  I am also running Norton Internet Security. I read a help of virtual navigation features Re article that can cause a problem. The article says to check the setting of virtualization in the internet security software and to clear the virtual cache. I went through all the menus of settings in Norton Internet Security version 21.6.0.32 and I don't see anything that looked like in "virtualization" settings, so I guess that does not apply to me. "

  If you have any ideas, I had appreaciate that your expertise!

  Hello arcandl, at the launch of the firefox is not after you double-click the shortcut, it is sometimes also a sign of active malware on a system.
  you might want to try running a scan with some various other security like the free version of malwarebytes and adwcleaner tools that are specialized to remove the adware and browser hijackers.

  Fix Firefox problems caused by malicious software