Could not open the defender who is off error code 800106ba

Similar Questions

• Windows could not set the offline locale information. Error code: 0x80FE0000

  Windows could not set the offline locale information. Error code: 0x80FE0000

  Handsome,

  Found that I got the same error (0x80fe0000) while trying to reinstall Windows Vista, Service Pack 1 on a Dell Inspiron 1545. Originally, the BSOD's happened and repair Windows has been in vain. Formatting the drive did not resolve the issue

  Replace the player has solved this problem for me. It seems that the disc has been/is damaged and would fail to resettlement.

  time of installation of $60 later and two hours and everything is fine.

  I hope this helps!

  DrMardo

• Could not open the file of muse: 3125 error cannot open database file

  Muse crashed on me a couple of times last night, I went ahead and installed the new update. Now, I can't open my files of muse and I get the error message "cannot open this file in the Adobe Muse site. Error #3125: could not open the database file. »

  Is it because I've updated? I can open some files in muse, but not those that I really need to work on.

  Hello

  Take a look at this thread: http://forums.adobe.com/message/5041864#5041864

  See you soon
  Parikshit

• BDP-N460 stuck in WELCOME, could not open the drawer, or switch off.

  BDP-N460 is stuck on WELCOME with an insdie drive.  I couldn't open the drawer or disable by using the buttons on the device.  Pulled the power cord, now not power up at all, even if the drive inside is making noises. I need #1 - out disc (manually?) and #2 Troubleshooting drive.

  Thank you for your post and welcome to the forums.

  If you have no power please have the unit plugged into a power outlet and not a power strip. Hold down the POWER and EJECT button for 10 seconds.

  If these procedures do not work please contact Sony Customer Support by clicking on the following link:

  http://eSupport.Sony.com/us/p/support-contacts.pl?MDL=BDPN460&loc=3

• My cloud of Adobe is not updates. The message: "could not update the Office of creative cloud (error code: 2)" can you help me?. Thank you.

  Cloud of meu nao esta recebendo atualizacoes Adobe. Appears a mensagem: "da of atualizacao Falha na Creative Cloud Desktop (erro code: 2)" Voces can me help?.»» Obrigado.

  Please try: error code 2 or 50: failure updating Creative Cloud desktop app

• When I try to install Firefox, I get an error "could not open the output file. I used Firefox before and it doesn't work anymore, so I uninstalled. Cannot re - install now.

  When I try to install Firefox, I get an error "could not open the output file. I used Firefox before and it doesn't work anymore, so I uninstalled. Cannot re - install now.

  This has happened

  Each time Firefox opened

  I tried to download firefox.

  User Agent

  Mozilla/4.0 (compatible; INTERNET EXPLORER 6.0; Windows NT 5.1; SV1; AntivirXP08; GTB6.3; .NET CLR 2.0.50727; MS - RTC LM 8)

  When you click on the download link on GetFirefox.com, you should be asked if you want to run or save the file. If this situation occurs when you try to run the download, try instead to record and put the file on your desktop or in a similar place, where you are certain that you can find.

  When the download is complete, try double-clicking on the downloaded file in the normal Windows Explorer (browse your way to the file from the desktop). This should start the installation.

  If, in the Explorer window, you notice that the file seems to be missing the Firefox icon orange/blue, right click the file and select Properties. The image should look like the attached picture (except that mine is in Danish, but that is irrelevant) if saved correctly - if it don't look like this, would you please describe the content or attach a screenshot of the box. Especially what it says under "File Type" - it must be 'program '. If this isn't the case, will have to focus on what could be the problem here.

  A bit off-topic, your Internet Explorer seems to be quite a bit outdated (IE 6, where the current version is IE 8), so I highly recommend that you try to run Windows Update to get your system up to date. Is it as a society (such as a thin client Terminal Server computer) system, this is not possible, and most likely, your system administrator will have to help you.

• Cannot send e-mail in Outlook Express. Message "could not open the message from the Outbox folder. 0x800420C8 error number.

  Cannot send e-mail in Outlook Express. Message "could not open the message from the Outbox folder. Account email Sympatico Server SMTPHM.sympatico.ca Protocol SMTP Port 25 secure (SSL) Yes, error number0x800420C8

  original title: 0x800420C8 error NUMBER

  Never seen a port 25, who wanted to use SSL, but by checking, Sympatico's apparently.

  1. This account has already worked? Is it simply to start?
  2. What is the exact verbatim error message? Otherwise, copy & paste it into a response.
  3. Have you tried to send a message and the message stuck in the Outbox?

• Windows Mail & Windows Live Mail does not start, could not open the message store

  Windows Mail & Windows Live Mail will not start. In both cases, I get an error message "Windows Mail could not be started. The application could not open the windows mail message store. Your Windows Mail mailbox data is currently used by another program, such as a virus scanner. Close the program or wait so he could complete its operation, then open Windows Mail again. (0x800C0155, 2). Waiting and turning off antivirus program do not solve the problem. For Windows Mail, I also have the message (Windows Mail could not be started because MSDE.) "DLL cannot be initialized). This message is not displayed for Windows Live.

  Hello

  1. did you of recent changes to the system before the show?

  I suggest you to follow the methods mentioned below and check if it helps.

  Method 1: Troubleshoot Windows Mail

  Follow the link below and troubleshoot Windows Mail and check if the problem persists.

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-Windows-Mail

  Method 2:

  (a) open the windows Explorer.

  (b) make a right click on the user C: folder, click Properties.

  (c) uncheck the 'read only' option, and remember that there is no blue rear field in the box.

  (d) apply to all subfolders.

  (e) let run its course.

  Method 3:

   

  EDITING REGISTRY WARNING:

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following link.

  Back up the registry

  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-the-registry

  (a) go to Start, type regedit in the search box.

  (b) expand this registry key: HKEY_CURRENT_USER\Software\Microsoft\Windows Mail.

  (c) right-click and choose export to back it up.

  (d) then make sure that Windows Mail is closed and right click on the key again and choose Remove.

  (e) then try to start Windows mail.

   

  Also, I suggest you to send your application in the Windows Live Solution Center for better support.
  http://windowslivehelp.com/solutions.aspx?ProductID=15

  It will be useful.

• ERROR: Could not open the file %s

  I try to use Consolidator or converter P2V enterprise multi-server Windows 2003 64-Bit.  But I get the following error:

  ERROR: Could not open the file %s

  I'm under VC 2.3 U2 and Converter Enterprise 3.0.3 Build 89816

  I have attached the log of the converter.

  Is there an ideal, which may be causing my problem?

  Thanks in advance,

  -geob

  geob,

  top line of this file indicates something else for the version of converter in use:

  Journal for the VMware Converter, pid = 1892, Agent version = 3.0.2u1, build = build-62456, option = release, section = 2

  Cannot open the %s file is trying to open the VMDK file to copy the data in.

  VMFolder = clone-essapd020-w085/clone-essapd020 - w085.vmdk

  ESX Server: essvmp020 - 006.emrcorp.local:902

  Everywhere where the converter works from cannot do the following:

  Resolve the hostname ESX (essvmp020 - 006.emrcorp.local)

  * There is a NAT between the ESX host and the source system

  * There is a blockage of port on TCP 902

  These are the most common problems.

  Kind regards

  EvilOne

  1 - verification of documents

  2 - search the forums

  3 - Question post

  And don't forget to award points to those who help you.

• Satellite U405 - S2833 Fingerprint error: could not open the sensor

  Hello, I am very new to the forums so I apologize in advance if I don't give all the necessary accurate information in this thread.

  I have a Toshiba U405-S2833 and it came with the TrueSuite Access Fingerprint Software.

  I downloaded an update a few days ago, but I don't remember if it's for Vista or Toshiba. Since then, my fingerprints were all removed from the system, and when I try re - save, I get this error message "error: could not open the sensor" I can't find the material to fix the sensor manually without going through the TrueSuite software.

  Any help would be greatly appreciated.
  Thanks in advance

  I am also having the same problem.

  My boss uses a Satellite U405-2628 fingerprinting and with the sensor TrueSuite Access Manager. It worked fine, then I updated windows and it has stopped working. I was on the updates and noticed an update of TrueSuite and thought that maybe that was messed up things.

  Then there were other issues that went past me locked out of the machine (anti-virus and loss of relationship with the field... also my fault). So I decided to wipe the machine and install fresh Vista.

  I installed everything but the TrueSuite software still not able to open the sensor. After hitting my head on it, I decided enough was enough and I restored it using Toshiba recovery disks.

  It took a few hours and here I am logged in as administrator and the TrueSuite software still cannot open the sensor. I don't know what I can do, since it is to return to the factory settings.

  As the above poster said, HELP!

  Thank you.

  ... a little later...

  Well, I managed to do work, and this can be useful for some people out there since I found no easy answers. I can't guarantee anything, and it's really complicated... so here go us.

  First, I downloaded the latest update from Toshiba (util_fingerprint_27460A.exe) and nothing has worked.
  Then I uninstalled the sensor since (click right, uninstalled) Device Manager to uninstall the driver as well (it should invite you to do so)
  Then, still in the Device Manager, I scanned for new hardware and it came with my sensor. I said to look for drivers and when he could not find, I think it gave me an option for windows search for an answer... or something like that. He came back with a link to Authentec (www.authentec.com/win7update/w7wbf32.exe, I think). So I downloaded that and installed. He rose through the device under "Biometric devices" then before... I think it's under the "Personall security device" or something like that. But alas, still no luck. So I uninstalled all the device from the Device Manager (taking care of uninstalling the driver as well) and of the TrueSuite software. Then came the break I was looking for.

  Online research I came across this page... http://members.driverguide.com/driver/detail.php?action=download&driverid=1194755. I had the chance before to DriverGuide.com so I thought what the heck. It is a driver of HP for the same sensor and it is dated 2006. So I downloaded and installed. Still nothing...

  Disgusted, I thought, well let's try to install util_fingerprint_27460A.exe on top of that. So I did, restarted and I couldn't believe my eyes when he said to connect and register fingerprints not seriously. And so I did. I hope this helps people, I don't really know how the sensor I so messed up, but I'm glad it worked.

  Yet one thing... and this may be important. When I took TrueSuite first after doing all this, he told me that the storage of fingerprints was full... or something in that sense. So I clicked the button remove all traces of fingers button and it I would like to register my fingerprints. I'm starting to wonder if that was all I had to do in the first place... Guess I'll never know.

  Good luck.

  Post edited by: rewind22x

• Satellite U300 PSU3DA: error: could not open the file attribute execution of concept maps

  I have a PSU3DA-U300 which I changed from Vista to XP.
  This is because my main computer use will be for navigation (boat) and I was told that most navigation programs will work better with XP. I have almost nothing on my laptop so far, and the system already seems to be slow and freezing too often.

  My question is now on the program of concept maps which I just installed and which does not open. He repeats to me "Eorror: could not open the file attribute.

  What does that mean? I uninstall and reinstall the program, and he comes back with this message.
  I had a glance at the Device Manager, and the only thing that seems incorrect is the PCI memory controller.
  I did a bit of research on this and it seems that this driver is not required for XP? Is this true?

  Would this be a cause of C-Maps program does not?

  Thanks in advance.

  > I did a bit of research on this and it seems that this driver is not required for XP? Is this true?
  Where did you read this info?
  I put t know if the driver is not required, but you get all the drivers on the Toshiba site.

  For your problem with concept maps, I think that it is best to contact you that support the conceptual maps. Here, this is a forum for Toshiba laptops.

• Could not open the file sml nokia

  Could not open the file sml nokia

  Hello

  The operating system that you are running on your computer?

  You must identify a program to open the file. Associate the fily type with a program, and check if it helps.

  Refer to this article for help:
  http://Windows.Microsoft.com/en-us/Windows-Vista/change-which-programs-Windows-uses-by-default

• Could not open the page to update windows with the error 80072efe

  Could not open the page to update windows with the error 80072efe

  0x80072EFE - ERROR_INTERNET_CONNECTION_ABORTED - the connection with the server has been terminated.

  How to reset the Windows Update components?
  http://support.Microsoft.com/kb/971058

  TaurArian [MVP] 2005-2010 - Update Services

• I've attached a scan to an email, but it says "could not open the file C:\users\My Windows\AppData\Local\Microsoft\Windows |" Temporary Internet Files\Content.IE5\TQDLSO1A\etc, etc.

  I've attached a scan to an email, but it says "could not open the file C:\users\My Windows\AppData\Local\Microsoft\Windows |" Temporary Internet Files\Content.IE5\TQDLSO1A\etc, etc.

  I'm probably not explaining my problem fairly - well, I scanned something in - I used Nuance Paperport.  I have it attached to an email and sent to six people - including myself.  I always open the attached file to make sure that the computer has sent the right thing.  When I tried to open the attachment I got the message "cannot open the file - I have already sent you."  I think that Norton Security got rid of the file I need.  I think I will contact them.  I tried to contact Nuance - but alas, my warranty has expired, so no help there unless I want to pay for it.  If I can't have the problem solved through Norton, I will contact you again.  Thank you very much for taking the time to try to help me.  Have a great Thanksgiving action!

  ================================================
  Your explanation was nice... that was my answer that failed.

  I was hoping that you would simply copy the scan of your temporary
  Internet files folder and paste it on your desktop. Then you might
  evaluate what is the problem. I thought that trying to open
  with such a long way email could be a problem. And also... it's possible
  be a file association problem. And it could be a matter of file size.

  I understand that you care why the attachment to the email
  failure and I think you need to find what is the problem with the scan
  before fastening will be successful.

• Windows Live Mail could not be started. The application could not open the Windows Live Mail message store error code: 0x800C0155

  Origianl title: windows live does not open

  My Windows Live Mail has recently stopped working, by double-clicking on the desktop icon top of page does not open the program, appears it the "Windows Live Mail" logo and then a message saying:-"Windows Live Mail could not be started. The application could not open the Windows Live Mail message store. Your Windows Live Mail mailbox is currently being used by another program, such as a virus scanner. close the program or wait so he could complete its operation, then open Windows Live Mail again. (0x800C0155).

  I tried to reinstall WLM, restore my computer, remove anti virus protection. Nothing works

  Help, please!

  Hi B Clinton,

  For a more specialized on issue of Windows Live Mail help, send your query on the Windows Live Forum.

  Windows Live Forum -http://windowslivehelp.com/