Could not reserve enough space for lots of things

Similar Questions

• WebLogic 11.1.1.7 could not reserve enough space for lots of things

  This message is for weblogic startup after installing soa suite/weblogic.  When you start Weblogic it fails immediately and you get this message (if you are using windows, the just command window dies, then open a prompt back, cd to the directory of your startWebLogic.cmd and run it from the command line).

  The generated error will be:

  Error occurred during initialization of VM

  Could not reserve enough space for lots of things

  Update:
  The first time I tried this I was in every way because I didn't know which configurations would work. This time, I did only these values, and it worked fine.

  in the setDomainEnv.cmd file

  Changed
  Set XMS_SUN_64BIT = 256
  Set XMS_SUN_32BIT = 256
  Set XMX_SUN_64BIT = 512
  Set XMX_SUN_32BIT = 512
  etc...

  Changed to
  Set XMS_SUN_64BIT = 512
  Set XMS_SUN_32BIT = 512
  Set XMX_SUN_64BIT = 1024
  Set XMX_SUN_32BIT = 1024
  Set XMS_JROCKIT_64BIT = 512
  Set XMS_JROCKIT_32BIT = 512
  Set XMX_JROCKIT_64BIT = 1024
  Set XMX_JROCKIT_32BIT = 1024

  I also commented on the section rolling too these values under section USER_MEM_ARGS

  @REMif is NOT () "% USER_MEM_ARGS %"is.

  @REM set MEM_ARGS = % USER_MEM_ARGS %

  @REM)

  Original post___
  I just installed soa suite 11.1.1.7, but downloaded from the OSB page, if it is different from the SOA download page. I'm on a windows 7 64-bit machine, but installed the 32-bit version.

  I couldn't start weblogic with the setDomainEnv.cmd original settings and found this post Heap Size for weblogic Server

  My original settings where
  Set XMS_SUN_64BIT = 256
  Set XMS_SUN_32BIT = 256
  Set XMX_SUN_64BIT = 512
  Set XMX_SUN_32BIT = 512
  etc...

  That position suggested upping the parameters to 2048. He has not worked for me. Instead, when I finally reduced values to 1024 it worked. (I wasn't clear what parameters must be defined on anything, so I put almost all 1024, although the permsize I read somewhere should be half the other parameters.)

  I was kind of all over the place because there were so many different xmx or xms values, so

  If you make these changes, but when to start weblogic, they do not appear on the first part, then look at commenting on article that refers to USER_MEM_ARGS, which go up the settings too much you can do.

  
  Here's the result when you run weblogic at Xms2048m-Xmx2048m - XX: CompileThreshold = 8000 - XX: PermSize = 512 m (which didn't work - she also did not work with the original settings).

  C:\WlsSOA\JDK160~1\bin\java-client-Xms2048m-Xmx2048m - XX : CompileThreshold = 8000 - XX : PermSize = 512m - XX : MaxPermSize = 512m-Dweblogic.Name=AdminServer-Djava.security.policy=C:\WlsSOA\WLSERV~1.3\server\lib\weblogic.policy - Xverify : none - Xverify : aucun-da-Dplatform.home=C:\WlsSOA\WLSERV~1.3-Dwls.home=C:\WlsSOA\WLSERV~1.3\server-Dweblogic.home=C:\WlsSOA\WLSERV~1.3\server-Dcommon.components.home=C:\WlsSOA\ORACLE~1-Djrf.version=11.1.1-Dorg.apache.commons.logging.Log=org.apache.commons.logging.impl.Jdk14Logger-Ddomain.home=C:\WlsSOA\USER_P~1\SOA\domains\SOA_DO~1-Djrockit.optfile=C:\WlsSO
  A\ORACLE~1\modules\oracle.jrf_11.1.1\jrocket_optfile.txt-Doracle.server.config.dir=C:\WlsSOA\USER_P~1\SOA\domains\SOA_DO~1\config\FMWCON~1\servers\AdminServer-Doracle.domain.config.dir=C:\WlsSOA\USER_P~1\SOA\domains\SOA_DO~1\config\FMWCON~1-Digf.arisidbeans.carmlloc=C:\WlsSOA\USER_P~1\SOA\domains\SOA_DO~1\config\FMWCON~1\carml-Digf.arisidstack.home=C:\WlsSOA\USER_P~1\SOA\domains\SOA_DO~1\config\FMWCON~1\arisidprovider-Doracle.security.jps.config=C:\WlsSOA\USER_P~1\SOA\domains\SOA_DO~1\config\ -Doracle.deployed.app.dir=C:\WlsSOA\USER_ P ~ 1\SOA\domains\SOA_DO ~ 1\serve fmwconfig\jps-config. XML
  rs\AdminServer\tmp\_WL_user-Doracle.deployed.app.ext=\--Dweblogic.alternateTypesDirectory=C:\WlsSOA\ORACLE~1\modules\oracle.ossoiap_11.1.1,C:\WlsSOA\ORACLE~1\modules\oracle.oamprovider_11.1.1,C:\WlsSOA\ORACLE~1\modules\oracle.jps_11.1.1-Djava.protocol.handler.pkgs=oracle.mds.net.protocol"| "Oracle.fabric.Common.classloaderurl.Handler" | " "Oracle.fabric.Common.uddiurl.Handler" | " "Oracle.BPM.IO.FS.Protocol - Dweblogic.jdbc.remoteEnabled = false - da: org.apache.xmlbeans... - Dbpm.enabled=true-Dsoa.archives.dir=C:\WlsSOA\Oracle_SOA1\soa-Dsoa.oracle.home=C:\WlsSOA\Oracle_SOA1-Dsoa.instance.home=C:\Wls
  SOA\USER_P ~ 1\SOA\domains\SOA_DO ~ 1 - Dtangosol.coherence.clusteraddress=227.7.7.9-Dtangosol.coherence.clusterport=9778-Dtangosol.coherence.log=jdk-Djavax.xml.soap.MessageFactory=oracle.j2ee.ws.saaj.soap.MessageFactoryImpl-Dweblogic.transaction.blocking.commit=true-Dweblogic.transaction.blocking.rollback=true-Djavax.net.ssl.trustStore=C:\WlsSOA\WLSERV~1.3\server\lib\DemoTrust.jks-Dem.oracle.home=C:\WlsSOA\oracle_common-Djava.awt.headless=true-Dums.oracle.home=C:\WlsSOA\Oracle_SOA1-Dweblogic.management.discover=true-Dwlw.iterativeDev=-Dwlw.testConsole=-Dwlw.logErrorsToConsole= - Dwebl
  OGIC.ext.dirs=C:\WlsSOA\patch_wls1036\profiles\default\sysext_manifest_classpath; C:\WlsSOA\patch_oepe180\profiles\default\sysext_manifest_classpath; C:\WlsSOA\patch_ocp371\profiles\default\sysext_manifest_classpath; C:\WlsSOA\patch_adfr1111\profiles\default\sysext_manifest_classpath weblogic. Server
  Error occurred during initialization of VM
  Could not reserve enough space for lots of things

  Published by: Stuart Fleming on 14 April 2013 06:24

  Published by: Stuart Fleming on 21 April 2013 06:08

  Published by: Stuart Fleming on 7 may 2013 18:05 - added the name of the file!

  Published by: Stuart Fleming on 7 may 2013 18:22

  Post edited by: StuartFleming

  Hi Stuart,

  You may be using hardware 32 bit or a 32-bit JDK and therefore the error occurred during initialization of VM
  ERROR: "could not reserve enough space for lots of things.

  If you use a 32-bit with WLS JDK and try to allocate more than 2 GB (or according to the limitations of the operating system: for certain combinations of OS/FMV is greater or less than 2 GB) memory for the java process, allocating memory fails and throws the exception specified.

  If you use a 32-bit JDK, then the following OS limitations exist:

  Windows OS
  32-bit: address space of 4 GB (232-1)
  For the core 2G + 2G for space Application
  1.5 G Max heap size (remaining natives + battery)
  64-bit: address space 16 terabytes
  No limit on the size of the heap

  For all other UNIX machines:
  Linux OS:
  32-bit: address space of 4 GB (232-1)
  1.3 G for nucleus + 2.7 G for space Application
  2.0 G max heap size (remaining natives + battery)
  64-bit: address space 16 terabytes
  No limit on the size of the heap

  SOLARIS:
  32-bit: address space of 4 GB (232-1)
  2.0 g per core + 2.0 G of Application space
  1.5 G Max heap size (remaining natives + battery)
  64-bit: address space 16 terabytes
  No limit on the size of the heap

  AIX:
  32-bit: address space of 4 GB (232-1)
  1.0 G for nucleus + 3.0 G of Application space
  2.4 G max heap size (remaining natives + battery)
  64-bit: address space 16 terabytes
  No limit on the size of the heap

  HP - UX:
  32-bit: address space of 4 GB (232-1)
  0.2 G core + 3.8 G for space Application
  3.0 G max heap size (remaining natives + battery)
  64-bit: address space 16 terabytes
  No limit on the size of the heap

  Also check the available physical memory on the computer. Cannot set the segment size to more than 75% of the available physical memory.

  Here is the Solution to your problem

  Upgrade to a 64 bit JDK.

  OR

  If you cannot upgrade to hardware 64-bit and a 64-bit JDK *, and then set the maximum segment size to one of the following based on the operating system:

  Windows: 1.5 G
  Linux: 2.0 G
  Solaris: 1.5 G
  AIX: 2.4 G
  HP - UX: 3.0 G

  Hope this helps!

  Thank you
  Vijaya

  Published by: Vijaya_Gopal on May 8, 2013 09:59

• When will install Server 2008 Windows OS. Error Msg 0 x coming 80070070: "do not have enough space for the installation..." Even if I have 20 GB of space? Pls solve this problem immediately.

  When will install Server 2008 Windows OS. Error Msg 0 x coming 80070070: "do not have enough space for the installation..." Even if I have 20 GB of space? Pls solve this problem immediately.

  Hey Shiva,

  I suggest that you post the application on Microsoft TechNet forum because we have experts working on these issues. You can check the link to post the same query on TechNet:

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?Forum=windowsserver2008r2general

  Please do not hesitate to contact us if you have other questions related to Windows.

• I started the download of el capitan and did not have enough space for the upgrade - I released space, but now the upgrade is blocked for download

  I'm on 10.10.5 and try to upgrade to el capitan via the App Store.  I don't have enough space at the beginning and upgrade wouldn't start - I got error message says not enough disk space.  Once I released space, download hangs and will not end.  I have restarted the download several times and have rebooted as well.

  Hello

  Take a look in your Applications folder to install Mac OS X El Capitan.app. If you find move him to the trash, then empty/remove it. Another thing you could try is to go to Launchpad and look an article with the 'X' Mac OS X logo on it,

  Click and hold on it until it wiggles, and then click the little 'x' and then delete.

  Restart the Mac, relaunch the App Store and see if you can download now El Capitan.

  Another thing you can do, when the download is complete and what is important before you begin the installation process, do a copy to install Mac OS X El Capitan.app and keep them safe, to an external drive or USB key, the original in the Application folder item is deleted once the installation is complete. It is snack and practice have this spare copy so that you can install on other Macs if you want you will need to re - install the system should anything go wrong in the future.

  And always, always make a backup before making major changes to your system.

• Sansa Fuze 2 GB keeps closing "not enough space for music db" then it stops?

  Not say 'enough space for music DB'... then it stops is not allowing me to remove?

  Connect the player to pc and delete some songs in the player using the pc. Be sure to always leave a reasonable amount of free space on the drive (perhaps 70 meg?) then the player can build the database. If I had written the firmware, I would probably have reserved a certain amount of memory for the database, so when people full of songs as much as possible in the drive it would not encounter this problem.

• How we get enough space for a column in the SQL report?

  How did one reserves enough spaces for a column in the SQL report?
  
  Ex: 2 columns defined as follows
  
  projectNo varchar2 (10)
  ProjectName varchar2 (50)
  
  When creating a sql, the report header report will show below. If my project name is 'Tire force Test site R987654'. I need to show in a single line, since it has been defined as varchar2 (50)

  projectNo     ProjectName
  A0001         Tire Strength
                Test At Site
                R987654 

  It have a way to get around here. Thanks in advance.
  
  Tai

  You can enter "space: nowrap;" in the CSS Style of the column, or, better yet, to set a CSS class to it.

  HTH,
  Chris

• Problem with m230: not enough space for music DB. Please free 8 MB.

  OK, so. Hi, I'm new in this forum.

  Then.  I wanted to listen to music. SanDisk initialize arrived, then the 512 MB Sansa m230 and then the error:

  Not enough space for music DB. Please free 8 MB.

  And then you can see: no files 0/0. And the battery is fully charged. I thought that the...

  So I decided to connect m230 to my computer. First initialization, then the error came, had to wait a bit and then... the Sansa screen shows:

  USB connected MTP (and this popped into my computer: http://i30.tinypic.com/2i9jo82.png)

  Then. I open Sansa m230 in my computer and the folder that I saw was: RECORDING

  Well... I'm sure many of you could suggest me to format or reset. But... There is a problem:

  Where is the format button? (http://i31.tinypic.com/dvoky9.png)

  Then. I tried to format it in computer management. Device Manager > portable devices >
  Sansa m230. But... where is the format? (http://i31.tinypic.com/10x7q06.png)

  I went through a few topics, and someone suggested to format under removable storage, but there is no m230.

  Then I thought that I try the FirmWare update. But... the error popped up:

  The following error occurred: your device is in MTP mode. It can only be updated in MSC mode. Please disconnect your device and switch to MSC mode if you want to check the updates.

  But good... How can I change the mode MSC, coz... If I press the menu button on my m230, always pops up an error:

  Not enough space for music DB. Please free 8 MB. I can't do nothing in the menus. Aaand by the way, I have this player mp3 more than a year, so there is no guarantee or something for me I guess.

  Then. is there a way to do the hard reset or something? Is there a way to fix my m230? Feel free to ask me questions. I would be very happy if you answer.

  Aaand... Sorry for my English. I'm not from English speaking countries

  All the best,

  MagicIsland

  Hello MagicIsland, you may need to format your device, but it will delete everything on your player to try to see if you can always save the files when you connect your device by following these steps.

  http://KB.SanDisk.com/app/answers/detail/A_ID/1/kW/not%20enough%20space%20For%20Music%20dB%20error%20For%20m200/r_id/101834

  hope this work

• Why I see Runtime Error R6016-not enough space for thread data?

  All of a sudden when I try to launch Google Chrome, I get "error R6016-not enough space for thread data? ' like Chrome stops. Plenty of hard disk, disk defragmented, no viruses or malware. Never seen this message before.

  I think you're on the right track to reinstall Chrome... but they have a method of choice for the best results and that the information is here:

  http://support.Google.com/chrome/bin/answer.py?hl=en&answer=111899

  Just FYI, running sfc/scannow won't help, but it will waste your time and you will not be able to determine which file is causing the problem because...

  When sfc/scannow runs successfully, you will see a start and complete message in the Event Viewer log system.

  It can take a long time to run and slow down your system.  When it starts and stops correctly you can only see events like this in the case where the system log viewer:

  Event type: Information
  Event source: Windows File Protection
  Event category: no
  Event ID: 64016
  Analysis of file File Protection Windows has been started.

  Event type: Information
  Event source: Windows File Protection
  Event category: no
  Event ID: 64017
  Windows File Protection file analysis completed successfully.

  There is no information about what he did or what he did not.

  Even if sfc/scannow finds something to do, you will not know about it.

  That's why try again more than a waste of time.

• Not enough space for DB - formatted - now FAT is corrupted

  I received an error message after the music to transfer to my Sansa Fuze.  The message indicate that there was not enough space for DB and supposed to free 90 MB.  I have read the instructions on the website and formatted the drive.  Now, I get an error message saying that FAT is corrupted and say to connect it to the PC to get FAT.  I reconnected it to the computer without modification.  Then, I downloaded the firmware zip file and uploaded the file on the disk.  Still no change.  Please notify.

  You can try the player formatting MSC mode.  To connect the player in MSC mode, with the player to the wide, slide the switch down to the locked position (you will see an orange color it), and then press and hold the< or="" back="" button="" while="" you="" connect="" the="" fuze="" to="" the="" pc.  ="" you="" may="" have="" to="" continue="" holding="" the="">< button="" down="" for="" a="" while="" until="" you="" get="" a="">

  If the computer recognizes the player in form through the computer.  If your drive is a one, fornat 2 GB as FAT.  For a 4 GB or 8 GB, formatted in FAT32.

  If it formats correctly and the drive does not operate normally, reformat through the player settings to optimize the memory.

  Another thing, sometimes the 'diskspace for DB' message appears due to a bad music file (s).  You can check the files that you have transferred before the trouble began.

• Not enough space for music DB and must free up space

  My Sansa was working fine and then I downloaded music on the sansa. Then it says not enough space for music DB and I need to clear 90 MB. I was downloading music on the sd card in the mp3. Now when I plug it into my computer it will not sync with my Media Player. I deleted all my music from my Media Player and synchronize it manually upwards and it will not always remove the song on the sansa. Please help someone!

  Use the Format function in the settings menu to erase the memory completely and read this FAQ.

• Not enough space for music DB error message.

  Hello. Whenever I try to open my Sansa clip mp3 player continues to display the message: "not enough space for music DB. Please free 30 MB. And I have 2 GB. It happened when my brother said he tried to better the music so he can get over. That's all what he says is reached. Now I can't fix it. I tried to remove even the files that are on it that did not help. It comes only to return when I reopen it the Clip. Is there someone who knows the solution to this? Thank you very much.

  PromisedPlanet wrote:
  Select "Format" in the menu "settings".  (Careful, this will delete all the music on the video.)

  It's the extreme solution. Try this first.

• Not enough space for music db

  After I reformatted and loaded new firmware, I get a message ' ot enough space for music DB Please free 6 MB storage "when I select my player on my computor it says no disc. In disk manage ment is 0 space used gig s/b 8. Any help would be apprieciated.

  Yes I do in MSC mode. In fact I did it in through the Windows Recovery mode: switch to orange, press record and start at the same time. I'm not aware of sansa.fmt I'll look into it. What worries me the most, is that I'm only seeing 16mg of storage on a 8gig machine, I am afraid I can have blown memory storage. I had all kinds of problems with this machine mainly MTP mode and message code 10 on machines running Vista sp1 and 11 units media center. So I tried to format it and that's how I got here. I tried all the suggestions for the problem of PSG in FAQ nothing helps. It worked fine on XP and Vista A pre - sp1 machine. I think something has changed with media center 11 and PSG maybe a new driver. I have the same problem with my wifes (PSG 10 code) sansa, except that I have not formatted so it always works. I think we can be directed to the ipod if I can't get this resolved.

• "Clips do not have enough media for the transition?

  I have two clips between which I want to insert a cross fade.  The first clip is 19 seconds long, the second is 16 seconds.

  When I try to put in the transition (I did two seconds of time), I get a message saying "Clips do not have enough media for the transition."  He will accept no transition more than 0.1 seconds.

  It makes no sense to me.  There are a lot of media for the transition time.  Can someone find out who's the problem and a possible solution?  Thank you.

  If it's important, the first clip is a mp4 video, and the second is a jpg photo.

• Cannot open the Windows Gallery with error message: "you may not have enough space on your hard drive or critical files may be lack of Windows.

  Original title: Windows Photo Gallery problems

  I have a problem trying to open Windows Photo Gallery, when I click on the program tab I get an error message saying: Photo Gallery cannot start. You can have enough space on your hard drive or critical files may be lack of Windows.

  • NO Mahesh B G , is not windows live photo gallery, windows photo gallery & is the message I get "could not open the Windows Gallery with error message: 'You may not have enough space on your hard drive or critical files may be lack of Windows'." Thank you Dave 07/11/2012

  Hi David,

  1. have you made changes on the computer before this problem?
  2. are you referring to the Windows Live Photo Gallery?

  Please follow the methods and mark the question below:

  Method 1:

  Fixed problems with Windows Live Photo Gallery that does not:
  http://support.Microsoft.com/mats/windows_photo_and_slideshow_diag/

  Method 2:

  You need perform a clean boot to prevent any third party conflicting application from interfering with your computer.

  To put the computer in a clean boot State, you must follow the steps in the article mentioned below and check with the question.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7:
  http://support.Microsoft.com/kb/929135

  Note: You must follow step 7 of the article mentioned above to recover your computer to a Normal startup after you complete all the steps.

  I hope this helps.

• ohasd could not start: ioctl inappropriate for device - standalone grid root.sh installation is not

  Hi all

  During the installation of grid software Oracle 11 g root.sh (11.2.0.4) 2 (standalone) OL6.3 failed with the below mentioned error.

  ===========Error============

  
  Assistant configuration database when a database is created
  Finished to turn the generic part of the root.sh script.
  Now root product-specific actions will be performed.
  2015-07-08 15:09:27: verification of superuser privileges
  2015-07-08 15:09:27: user has superuser privileges
  2015-07-08 15:09:27: analyzing the host name
  Using the configuration settings file:

  /U01/app/grid/product/11.2.0/grid/CRS/install/crsconfig_params
  Create the trace directory
  ADD LOCAL MODE
  Creating OCR keys for the user 'oracle', privgrp 'oinstall '...
  Successful operation.
  CRS-4664: node kchjovm42 pinned successfully.
  Adding to inittab demon
  CRS-4124: Oracle high availability Services startup failed.
  CRS-4000: Start command has failed, or completed with errors.
  ohasd could not start: Inappropriate ioctl for device
  ohasd could not start: Inappropriate ioctl for this device

  /U01/app/grid/product/11.2.0/grid/CRS/install/roothas.pl line 296.
  [grid root@kchjovm42] #.

  ===============================

  Given that the error has been corresponding exactly to Doc-ID 1607600.1 I tried to follow the steps mentioned but he couldn't go well, release pasted below,

  [root@kchjovm42 bin] # initctl reload configuration

  [root@kchjovm42 bin] # initctl start oracle-ohasd

  initctl: unknown employment: oracle-ohasd

  [root@kchjovm42 bin] # initctl list | grep oracle

  [root@kchjovm42 bin] #.

  While they inspected I found that initctl has no service oracle-ohasd that there are listed.

  Manual start of service has also failed,

  [root@kchjovm42 init] # initctl start oracle-ohasd

  initctl: unknown employment: oracle-ohasd

  [init root@kchjovm42] #.

  There are a lot of notes and documents available on the community & MOS but not get a voucher for my case. Grateful if you can help with this problem.

  Thank you

  Abhijit

  Refer to OHASD could not start: Inappropriate ioctl for device [1069182.1 ID]

  HTH

  -Pavan Kumar N