Could not start the system image restore

Similar Questions

• G72-B62US: could not start the system after Go Back Windows 10-7

  I had to go back to Windows 7 from Windows 10 because I couldn't get wireless adapter to work with a Wi - Fi connection.  I was at risk of ending my window a month to roll back.  After the Roll Back Windows 7 Gets an error on startup and the blue screen of death flashes.  Windows is trying to perform the Startup Repair and fails.

  The system, I cannot get Safe Mode.  As soon as I push the power button it gives me two choices - launch Startup Repair) 1 or 2) start Windows normally

  The repair utility says:

  Startup Repair cannot repair this computer automatically.

  Under the heading view problem details, he says:

  Signature of the problem:

  Problem event name: StartupRepairOffline

  Signature of the problem 01: 6.1.7600.16385

  Signature of the problem 02: 6.1.7600.16385

  Signature of the problem 03: unknown

  Signature of the 04:21200680 problem

  Signature of the problem 05: AutoFailover

  Signature of problem 06:5

  Signature of the problem 01: NoRootCause

  The system version: 6.1.7600.2.0.0.256.1

  Locale ID: 1033

  Once I close this window I'm in HP Recovery Manager.  It gives me one of the following options:

  Microsoft System Restore - there is no restore point

  System recovery - it says to restore your computer to out-of-box state

  Reduced Image Recovery - having said that to restore your computer to a Windows clean, the software with minimal and drivers

  So now I'm dead.

  What can be done for me other that start over completely with a cost of Windows 7?

  Unfortunately, the Win10 GoBack function is showing himself to be unreliable, because you're not the only one to declare that use it has left their machine unusable - same thing happened to me and I had to restore my laptop HP recovery HP media.

  You can try following the steps in the post of recovery HP Win7., but my experience has been that the upgrade of Win10 corrupt recovery by-product information: HP PCs - performing a recovery of system HP (Windows 7) | HP® customer support

  If this does not work, you look at using HP recovery media: HP PCs - getting HP discs recovery or a USB HP recovery disc | HP® customer support

• Error message "could not start the system event notification service.

  Original title: windows s event notification service does not start whwn that my PC is started

  Hello

  I'm running on the windows operating system 7, suddenly today I see when my computer starts, he says:

  1. windows event notification service does not start

  2. start menu back to Classic view, all of the aero themes has turned.

  3. right click on desktop seems to not work

  I have not had any installed software recently, don't know why it happened you can help me with this? I've restored a few days again the same question

  can someone help me?

  Sujith Hello,

  Thanks for posting your question on the Forums of community of Microsoft.

  According to the description, you got the error message "windows event notification service cannot start.

  I suggest to follow the suggestions of Bikesh T replied on 1 June 2011 from the link below and check.

  Reference:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-networking/failed-to-start-system-event-notification-service/eec9b5cd-fda9-43eb-B6D0-d2ba92e79413

  Hope the helps of information. Let us know if you need help with Windows related issues. We will be happy to help you.

• "Could not start the system event notification service" windows 7

  My computer started to get this message "Failed to start system event notification service" submarine ball, I have windows 7.

  I tried netsh winsock reset, but the problem persists.

  the sfc/scannow shows no errors.

  I am not able to connect to the internet. Kindly help

  Hello

  I suggest you follow the below methods that can help you resolve your isssue:

  Method 1:

  Restart the system event notification service.

  • Open the Start Menu.
  • In the online search, type services.msc and press enter.
  • If you are prompted, click on continue in the UAC prompt or provide the password for administrator approval.
  • Right click on the service you want to restart.

  Method 2:

  I recommend you perform the clean boot.
   
  Put your boot system helps determine if third-party applications or startup items are causing the problem. If so, you need to maybe contact the manufacturer of the program for updates or uninstall and reinstall the program.
   
  See the following article in the Microsoft KB for more information on how to solve a problem by performing a clean boot in Windows Vista or Windows 7:
   
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135 
   
  Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

• HAB check failed for start / could not validate the boot image

  Hello

  I have neglected my E bike for a few weeks and when I loaded and it fed today, it shows a menu and:

  HAB check failed to start

  could not validate the boot image

  Tried all the menu items and none of them worked. For me, it's very odd behavior, because BONE is not affected since the last Android 5 update, several months ago.

  Are there opportunities for the device?

  If you can't make an external reset via hardware buttons, then your phone will have to service.

• Could not start the Windows Vista firewall

  Hi all

  I can't start the Windows Firewall service in anyway.
  I can't open it via Control Panel, as it is said simply: "the Windows Firewall settings cannot poster because the asscioated service is not running. You want to start the Windows Firewall service? »
  I click "Yes", then he said: 'Windows cannot start the Windows Firewall service. There is no error code indicated.
  I tried running "wf.msc" using the Microsoft Management Console. When this window appears, he says: "there was an error opening the Windows Firewall with advanced snap-in security.; The Windows Firewall with Advanced Security snap could not load. Restart the Windows Firewall service on the computer that you are managing. "Error code: 0x6D9.
  As it seems, I can not start it this way or the other.
  I pressed Ctrl + Alt + Delete and click on the Services tab, then click services on the bottom, and this opens the Services window.
  In the new Services window, I try to start the service "Windows Firewall". I get a message saying: "Windows could not start the Windows Firewall service on the Local computer.; Error 1068: the dependency service or group could start. »
  Therefore, it does not. The service is set to automatic.
  I found another process called 'Base filtering engine', which I discovered is related to the use of the Windows Firewall service. Then, that I try to start this service, and he said: "Windows has no start the engine service of filtering based on Local computer." Error 0 x 80320009: an object with this GUID or LUID already exists. »
  Still, I can't find a way to fix the problem. In addition, the service is set to automatic.
  So if someone could help me, give me ideas or tell me how to solve the problem, it would be greatly appreciated. Thanks in advance.
  P. S. sometimes, when I type things in the command prompt, I get a message saying that "the requested operation requires a rise." What it means
  ?
  EDIT:
  The base filtering engine
  IKE and AuthIPsec Keying Modules

  Internet Connection Sharing (ICS)

  IPsec policy agent

  Routing and remote access

  Windows event collector

  Windows Firewall

  All of these services don't work, with each saying "Windows did not start the * service * service on Local computer.; Error 1068: The dependency service or group could start. ", with the exception of the Base Filtering Engine service.

  EDIT:

  I believe that the motor of filter of Bae is the root cause of the problem, because when I try to start it, it says "Windows cannot start the engine service of filtering based on Local computer. Error 0 x 80320009: an object with this GUID or LUID already exists. ", so that all the other programs on this service, said depedent" Windows did not start the * service * service on Local computer. " ; Error 1068: The dependency service or group could start. ».

  EDIT:

  Hello everyone, I solved the problem. The problem is a corrupted, file called "secdrv.sys. To resolve this problem, I had to first download the file "secdrv.sys' out of my operating system CD. To do this, you must create a partition and "mount" a file on CD, on the newly created partition. The file you have to climb is and is called: "*: \sources\install.wim. Extending .wim means a "file system Windows Image" and to see what files it contains, you will need to download what we call the "Windows Automated Installation Kit". Explicit instructions on the installation procedure and where to get this program, is here: "http://www.vistax64.com/tutorials/86959-access-vista-install-dvd-files.html". Once you have the file mounted, just search the area mounted for "secdrv.sys", then copy and paste it in "C:\Windows\System32\drivers" or that where the drivers from your system. After that, restart and the BFE service and all of its dependencies should work properly. Thanks for the good help like SpiritX.

  Hello everyone, I solved the problem. The problem is a corrupted, file called "secdrv.sys. To resolve this problem, I had to first download the file "secdrv.sys' out of my operating system CD. To do this, you must create a partition and "mount" a file on CD, on the newly created partition. The file you have to climb is and is called: "*: \sources\install.wim. Extending .wim means a "file system Windows Image" and to see what files it contains, you will need to download what we call the "Windows Automated Installation Kit". Explicit instructions on the installation procedure and where to get this program, is here: "http://www.vistax64.com/tutorials/86959-access-vista-install-dvd-files.html". Once you have the file mounted, just search the area mounted for "secdrv.sys", then copy and paste it in "C:\Windows\System32\drivers" or that where the drivers from your system. After that, restart and the BFE service and all of its dependencies should work properly. Thanks for the good help like SpiritX.

• Could not start the desktop Vista after installing Windows Vista SP2, error: 0XC0190036.

  Original title: vista sp2 problem.

  I have a laptop that I haven't used in a while.  I took on a trip and received the message that the updates are available.  One was SP2.  After the update is complete, it failed to start with a message OXC0190036.

  Startup Repair said that he could not solve the problem.  Restoration of the system has not only restore - labeled SP1 and it allows you to finalize the restoration of files and stays there.  (I waited for 3 hours without change).
  I have a XP install disc that I used before installing Win 7 on my desktop, but it does not give me the opportunity to do an installation.
  Can enter the command prompt, I'm perplexed as to what to do.
  I want to get this laptop that works so I can give to someone who needs a faster machine.
  Thank you.
  Harold Menzel

  Hello

  XP disk will not help you to fix Vista

  As the system restore does not try a startup repair and / or a restoration of the system using a Microsoft Vista DVD

  Manufacturers recovery disks normally do not have Service Options; they are normally a relocation to the factory only settings option.

  Here is the guide to repair Options using a Vista DVD from Microsoft.

  If a friend or a work acquantance of yours has one, you can borrow and use it for repairs.

  http://www.bleepingcomputer.com/tutorials/repair-Windows-with-Windows-Startup-Repair/

  Table of contents

  1. Overview of Windows Vista repair options
  2. How to perform an automatic repair of Windows Vista using Startup Repair
  3. Advanced Tools Overview
  4. Conclusion

  If you do not or can not borrow a Microsoft DVD there is a download of a file ISO of Vista Startup Repair available that you can put on a Bootable floppy to make the above startup repair and that the method is recommended by a large number of posters in these Forums.

  Unfortunately, you have to buy it.

  Here is a link to it:

  http://NeoSmart.net/blog/2011/Windows-Recovery-discs-updated-reinstated/

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  And here are a few ways to reinstall Vista.

  There is no Windows Vista downloads available from Microsoft.

  You can contact your computer manufacturer and ask them to send you a set of recovery disks.

  They should do this for a small fee.

  And if you have never received a recovery disk when you bought your computer, there should be a recovery Partition on the hard drive to reinstall Vista on how you purchased your computer.

  The recovery process can be started by pressing a particular combination of the key or keys at startup. (Power on / start)

  Maybe it's F10, F11, Alt + F10, etc., depending on the manufacturer.

  Ask them to the proper key sequence.

  You can also borrow and use a Microsoft Vista DVD, which contains the files for the different editions of Vista (Home Basic, Home Premium, Business and Ultimate) must be installed. The product key on your computer / Laptop box determines what Edition is installed.

  Other manufacturers recovery DVDs are should not be used for this purpose.

  And you need to know the version of 'bit' for Vista, as 32-bit and 64-bit editions come on different DVDs

  Here's how to do a clean install of Vista using a DVD of Vista from Microsoft:

  "How to do a clean install and configure with a full Version of Vista '

  http://www.Vistax64.com/tutorials/117366-clean-install-full-version-Vista.html

  And once the operating system is installed, go to your computer manufacturer's website and get the latest drivers for your particular model or laptop computer.

  And phone Activation may be necessary when you use the above installation method.

  "How to activate Vista normally and by Activation of the phone '

  http://www.Vistax64.com/tutorials/84488-activate-Vista-phone.html

  See you soon.

• Could not start the Windows Security Center service.

  Could not start the Windows Security Center service. Tried to go to Services, but this message. Help me please!

  the error code says...

  one or more ActiveX controls could not be displayed because that is:

  1. your current prohibiti of security settings on this page activex controls running or,

  2. you have blocked an editor of one of the controls.

  Hello

  ·        Since when are you facing this problem?

  ·        Remember to make changes to the system?

  Note: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following link. http://Windows.Microsoft.com/en-us/Windows7/back-up-the-registry

  I suggest you follow the steps mentioned below.

  a. click on Start menu and type regedit.exe in the start search box and press ENTER.

  b. navigate to the following location. You must remove 1 (parasite) of additional area

  HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Internet Settings\Zones\
  with number Pseudo-graphique, you will see before the number of zone 0.

  c. check to see if the problem is resolved;

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows could not start the windows on the Local computer firewall

  Original title: I don't have the first response says.then the following error code came.
  Windows could not start the ICF on local Computer.For more information, review the system event Log.If this is a service not microsoft, the supplier of service relationship and refer to the specific service 5 error code

  Hello

  Thanks for posting the request in the Microsoft community forums.
  The problem description, I understand that you receive the error "Windows has no start the firewall windows on the Local computer. To resolve this problem, please answer the questions.

  1. what anti-virus software is installed on the computer?
  2. do you have a third party security/firewall on the computer?

  If Yes, then you may not be able to start Windows Firewall, since you have a 3rd group of firewall installed.

  Even if you can re-enable the Windows Firewall, you can not run two firewalls at the same time.

  Try the troubleshooting suggestions provided to start the Windows Firewall.

  Method 1:

  Run the fix it from the link to the problems of the Windows Firewall Service and check.

  Diagnose and automatically fix problems of Windows Firewall service

  http://support.Microsoft.com/mats/windows_firewall_diagnostic/en-us

  Method 2:
  You can check the service for the Service of Windows Firewall if it is started or not.

  a. Click Start.

  b. in the start search box, type Services.

  c. click right on - run as admin.

  Check if the below mentioned services has mentioned State and type start.

  Firewall Windows started Automatic\Manual.

  base filtering engine Automatic\Manual has begun.

  driver authorization Windows Firewall started Automatic\Manual.

  Also check the dependency services that are required for the execution of the Service Windows Firewall.

  Method 3:
  You can scan System File Checker to fix corrupted files.
  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
  http://support.Microsoft.com/kb/929833

  Method 4:
  If the problem persists then, try the steps from the link.
  Some services do not start in Windows Vista and Windows 7

  http://support.Microsoft.com/kb/943996

  Registry warning: Important this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  322756 (http://support.microsoft.com/kb/322756/ )

  How to back up and restore the registry in Windows

  Hope the information is useful. If you need help with the Windows Firewall, feel free to post you question in the forum. We will be happy to help you.

• (95%) FAILED: Could not find the system volume, reconfiguration is not possible.

  Hello

  I'm trying to virtualize a physical machine to my VMware infrastructure. I success to another machine, but this time it crashes.

  Here are the features:

  Software: Client VMware Converter standalone 4.0.1

  Machine: Microsoft Windows Server 2003 Enterprise with Exchange 2003 SP1

  Disks: 2 * 80 GB drives used in RAID 1 software mirror (2 partitions C: & D: cross the two discs)

  VMware farm: ESXi 4.1

  Configuration of the converter: http://image.bayimg.com/faackaadc.jpg

  I try to convert the machine but I get the following message "FAILED: could not find the system volume, reconfiguration is not possible." 95 per cent at the stage of reconfiguration (he create only a single vmdk).

  My research, it is likely due to software mirror, implying to dynamic disks.

  But I must not modify the physical machine, I have to migrate the computer because it is unchanged.

  A machine appears in vCenter. When I started it, it does not start. With QParted, I activated the flag of "boot". Now the machine starts, but I immediately get a blue screen even in safe mode. ( http://image.bayimg.com/faacaaadc.jpg )

  I've added the vmdk to another machine, and run diskmgmt.msc to convert dynamic disk to basic disk, but he saw disc base already.

  Initial configuration of the drives here: http://image.bayimg.com/eaacoaadc.jpg

  Attached files: boot.ini and newspapers

  What can I do to convert my machine?

  Thank you and sorry for my English

  =====================================================================================================

  Hello

  I try to virtualize a physical machine to my VMware infrastructure. I successful already have to pay another machine, but it it crashes.

  Here are the features:

  Software: Client VMware converter standalone 4.0.1

  Machine: Microsoft Windows Server 2003 Enterprise SP1 with Exchange 2003

  Disks: 2 80 GB drives used software mirror RAID 1 (2 partitions C: and D: cross on two discs)

  VMware farm: ESXi 4.1

  Conversion of configuration: http://image.bayimg.com/faackaadc.jpg

  I try to convert the machine but I get the following message "FAILED: could not find the system volume, reconfiguration is not possible." 95%, stage of Reconfiguration (it has created only a single vmdk).

  According to my research, it is probably due to the software mirror, which created from dynamic disks.

  Alternatively, in I am not touching the physical machine, I have to migrate the machine what without changing.

  A machine appears well in vCenter, when I start, it does not start. With QParted I activated the 'boot' flag The machine boot now, but I get a blue screen immediately, same en safe mode. ( http://image.bayimg.com/faacaaadc.jpg )

  I added the vmdk on another machine, with diskmgmt.msc I wanted to convert the dynamic disk to basic disk, but he was already seen as a basic disk.

  Here is the initial configuration of the discs: http://image.bayimg.com/eaacoaadc.jpg

  What can I do pour machine to convert my?

  Thank you

  Have you tried

  Try the option "set up the machine" of the converter against the vmx file that you already have.
  
  _________________________

  VMX-settings- WS FAQ -[MOAcd | http://sanbarrow.com/moa241.html]- VMDK-manual

• Could not start the time service windows on the local computer 2 error

  Cannot update the system clock of time Internet.

  After double click to display the time in the taskbar, the Date and time properties window appears.

  Then I time tab-click Internet, and then click Update now - this produces the following message...
  "Year error occurred getting the status of the last synchronization." The RPC server is unavailable ".
  Then I clicked on start > Control Panel > Administrative Services > Services > time Windows
  I click Start the service and get the following message...
  "Could not start the time service windows on local computer."
  "error 2: the system cannot find the file specified."
  Help!  What now?

  Hello

  Glad to know that the problem has been resolved. If you have additional questions on the computer, please ask your question about Windows and we will be happy to help you.

• Receive automatic updates for Windows XP "error 127: the specified procedure could not be found." Also "error 0 x 80240036: could not start the service automatic updates on local computer»

  Update CPU which proved later to be bad.  Replaced by original CPU.  Re-installed Windows XP Home using a slipstreamed CD that I burned the original non - OEM drive that has Service Pack 2.  Integrated Service Pack 3 which I got from the MS. site  Everything works well except for Windows Update.  The setting seem to be correct in Administrative Tools/Services.  The status of the Service is "stopped".  When I try to start the automatic updates from Administrative Tools/Services I receive "error 127: the specified procedure could not be found."  Also "error 0 x 80240036: could not start the service automatic updates on local computer»  Used the range of anti-virus and malware and found nothing.  Currently using Avast 7.0.1426.  I also used various tools of Fix - It MS nothing helps.  Any help would be greatly appreciated.  Thank you.

  Hello

  1. what application or antivirus security suite is installed and your current subscription?

  2 Norton (another) or a McAfee application ever installed on this machine?

  3. What are the fix applications that you used so far to try to fix this problem?

  Try the next method and check if that helps you with the question of the 127 error you receive.

  Method 1: Rdding the DLL file by doing the following:

  1. Click Start and click Run, in the search box type CMD and press to enter.
  2. right click on CMD in the list and click "Run as Administrator".
  3. type the following command and press ENTER. Regsvr32 msvcp71.dll
  4. close the command prompt window.

  Method 2: run the file system (CFS) Checker:

  (Note: you need an XP installation disk to start the System File Checker search.)

  The SFC command is used to detect and resolve problems with the files on Windows XP and Windows Vista computers. This command allows you to launch the Windows File Protection Service and allows you to analyze all integrity-protected Windows files and replace all problematic files identified.

  1. click on start, and in the box to start, search type CMD
  2. right click on CMD in the list and click "Run as Administrator"
  3. type the following command and press ENTER. Sfc/scannow
  4. close the command prompt window.

  For more information on scan SFC (System File Checker), please look in the link mentioned below.

  http://support.Microsoft.com/kb/310747

  I hope this helps.

• Windows could not start the background service Itelligent transfer service on local computer. 87 error: The parameter is incorrect

  I had a crash dump blue screen, tried solutiions to the problem and told me to go to windows update and download all windows updates. downlownloading all updates failed and I got the error.

  Code 80246008

  Click on get help with this error and was instructed to go to services and start the background intelligent service services, it gave me the error message;

  Windows could not start the background service Itelligent transfer service on local computer. 87 error: The parameter is incorrect

  Not very computer savvy! no idea what it all means or what I would do to this topic! Thanks a lot for any help

  Try this:

  To change or restart the Service (BITS) Background Intelligent Transfer

  1. Open administrative tools by clicking the start , clicking Control Panel, clicking system and Maintenance, and then clicking Administrative Tools.

  2. Double-click Services. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  3. Right click on the service of Intelligent Transfer (BITS) background and then click Properties.

  4. Under the tab general, next to startup type, make sure that automatic (delayed start) is selected.

  5. Next to Service status, check whether the service is started. If not, click Start.

• try to start the bonjour service, but get the error message: windows could not start the Bonjour service on local computer

  error message
  Windows could not start the Bonjour service on local computer
  Error 5 access is denied

  I have Vista Home.

  This prevents me to update I have tunes.

  Completely uninstall iTunes. Download the update manually from Apple or here. Restart the system and then install the software you have downloaded.

• Disk Defragmenter could not start the service task scheduler is not running. Start the Task Scheduler service, and then try again.

  im getting this message if I want to run Disk Defragmenter... "Disk Defragmenter cannot start the Task Scheduler service is not running. Start the Task Scheduler service and try again. "tried to start the Task Scheduler on services.msc, but it gives me the message" windows could not start the Task Scheduler on the computer local error 2: the system cannot find the file specified. '. »

  Hello

  See if run the checker (SFC.exe) system files using the parameter/scannow help.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7:
  http://support.Microsoft.com/default.aspx/KB/929833
  Ramesh Srinivasan, Microsoft MVP [Windows Desktop Experience]