Couldn't go to the mode "Eve"

Similar Questions

• my vista pc turns on itself when I put it on the mode "Eve"

  my vista turns on itself when I put it on the mode 'sleep' and when he turns on the led lights of my early internet modem flashes as if someone were to hack my pc because when he turns on the screen resolution and the police is changed if im connected component software plug-in or not... This could be due to updates? or infection by the virus in my pc?
  It is a basic family vista...

  http://www.Vistax64.com/tutorials/63567-power-options-sleep-mode-problems.HTML?filter [11] = power % 20Management

  How to solve a problem of Mode for Vista and find a Solution

  Read the above and the "related links":

  http://www.Vistax64.com/tutorials/198047-power-plan-restore-default-settings.html

  See you soon.

  Mick Murphy - Microsoft partner

• Windows 7 hangs 3.5 minutes after the mode "Eve"

  Install Windows 7 upgrade from vista. Everything works well, but crashes after the mode 'sleep'. takes 3.5 minutes to thaw. Have a hp pavilion a6707c. Vista was faster to return to that.

  Don't know if this helps, but after I disabled the hybrid sleep I can hibernate and that it only takes 35-40 seconds to resume and everything seems to work fine.

• Does Toshiba Canvio Basics 2.5"HARD drive is supported and the mode" Eve "?"

  Hello

  I have to buy this drive Canvio Basics - 2.5 500 GB to connect it to a satellite digital decoder humax HD-5400 s 5600 s Tivùsat or digital terrestrial receiver.

  Have the Toshiba HDTB305EK3AA 500 GB HDD standby idle mode?

  Thank you.

  Yes. This hd goes into mode after 3 minutes.
  I'm very happy, because this hd is connected to my humax and goes on standby after 3 minutes.

• Satellite Pro 6100: USB port does not work after the return of the mode "Eve"

  I have a strange error on my USB ports on Satttelite Pro 6100 with XP SP2.

  Two USB 1.1 ports work fine after cranking up what the laptop goes into mode 'sleep' (automatically or manually).
  The restart afret optical mouse connected to the USB port does not illuminate and the XP system displays the error message on the device not recognized on USB port.

  Plug the mouse on or off doesn't change anything. Only restart helps.

  Any ideas?

  It's very strange, but it will be interesting to see if the same problem persists with other USB devices. Can you test and post again on the results?

• Satellite P850-30W - the fan does not work after returning from the mode "Eve"

  I have a Toshiba Satellite P850 30W with bios 1.90.

  Sometimes the fan does not work at all after back mode standby on windows 7.
  What happened twice (perhaps several times without knowing me), and Ive had the computers for a month.

  Normally the fan starts to run when the CPU gets more than 50 degrees celsius and stops less than 50 celisus...

  I tried running Prime95 when this fan-this occurs and the time of the computer got dangerously high (near 100 degrees)! the fan did not start at all
  .. .This error could damage the laptop potentinally...
  to get the fan turns once again I have to restart windows

  anyone experienced this?
  I guess that the fix would be to never use standby... or toshiba needs to fix it with an update of the bios.

  > Sometimes the fan does not work at all after back mode standby on windows 7.
  > What has happened twice (perhaps several times without knowing me), and Ive had the computers for a month.

  You said it's happened twice and only sometimes done this means that above all the fans are working well?
  In this case, this would mean that it of difficult to reproduce this problem, but you might be right: maybe a BIOS update would help solve this problem permanently

  I found some discussions on the stand-by mode and fan activity and in most cases, the update of the BIOS was the key.

• All computer crashes if I leave it for a few minutes or exit the mode "Eve"

  My computer has had this problem for a few days now. Every time I have let a few minutes by himself or pass in mode 'sleep' it freezes. I can not even ALT-CTRL + DELETE, most of the time when I try nothing happens, but sometimes it comes up with an error of reading window

  «The login process failed create the dialog security.» Failure - Security Options.
  Now Microsoft update told me that the solution to this problem was a patch which I down loaded. I restarted and then let my computer go to sleep. It revives and my computer worked but since then, then she came back. If anyone can help me with this I would really appreciate it. I have a deadline coming and I can't afford to have this ongoing problem.
  Thank you
  Brian

  Hi Brian,.

  I suggest you send the link.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-performance/Vista-freezes-after-resume-from-long-sleep/ac9126a3-C116-4a6f-87ca-171301d23f34

• The VIsta calendar reminder is not pop up after the mode "Eve"

  Hello

  I had put a task reminder in the calendar from Windows Vista program.  But did not recall. I put usually PC mode 'sleep' when finished. So I tested if that did anything. So, I had an appointment for 12:15 and had reminder 5 minutes before.  Put the PC in 'sleep' to 12:00 and he works at 12:20, but the reminder of the calendar has no pop up, even after some time. It arises in place when I open the calendar program.  Even if instead of mode 'sleep', if I shut down the PC and start the reminder immediately opens. If "sleep" mode somehow put reminders in the sleep forever.

  Does anyone have idea about this bug?

  Thank you

  I don't know a solution. It does the same thing for me. I use the Outlook calendar. The Live, or Google Calendar likely would do anything as well.

  Messages rating helps other users

  Mark L. Ferguson MS - MVP

• Precision 7510 - crashes on the application of the mode "Eve"

  My 7510 accuracy crashes when you try to switch from "sleep". When I try to get to sleep, I get the screen "Windows has recovered from a serious error" and the whole system needs to restart.

  Update order Dell tells me everything is up-to-date (including the update of the BIOS) and Windows Update says the same thing. If it is a driver problem, I'll have to restore a previous version. I have not yet run a diagnosis of the BIOS, but I will.

  What newspapers should I look at to diagnose this problem? What steps should I take / what the driver update should I be back for this problem?

  I feel like such a fool. My laptop was not in hibernation mode. I put it in "standby" mode, thinking it was put into hibernation, and it lacked power.

  I'm sorry to have wasted your time.

  If someone else happens to come here, see this article for the solution to get involved as a Hibernate option if it has been disabled:

  support.Microsoft.com/.../920730

• Vista wireless loses Internet access after the mode "Eve".

  Environment:
  HP Pavilion dv2610ca notebook PC, broadcom 802. 11 b / g adapter, Vista Home Premium 32 bit SP2, Siemens Gigaset SE567 router/modem.

  Problem:
  I can usually connect wirelessly to my home network and to the Internet whenever I start my computer. However, I have close the lid and leave it in standby mode, I can't access Internet after I opened the lid and the system wakes up. The system connects to my home network but cannot access the Internet. It shows a Local access only.

  Diagnosis and repair fails generally, telling me that I have a problem with my router. Disconnect, then reconnect usually works. My router power market also works.

  I saw lots and lots of issues with Vista wireless networks and I followed several of the recommended actions:
  -updated the driver broadcom
  -reset the IP stack by using the tool "Fixit" of Microsoft
  -disabled the use of IPv6 in two by disabling the check marks in the related devices and changing the registry TCPIP6 parameters
  -modified the registry to activate/disable the DHCP broadcast flag in the TCPIP Interfaces
  -J' tell the system not to disable the card Broadcom, but the "Power management" tab mentioned in some articles does not appear in its properties. The only reference to power is "Minimum energy" under the "Advanced" tab, then I disabled who.

  Nothing has solved the problem.

  Has anyone else had this problem and fixed it?

  I'm not a technical Wizard, so please provide instructions for any action that you suggest.

  Thank you.

  I replaced the Siemens router/modem provided by my ISP (Telus) with an old D-Link router and separate modem 3Comm I had been using a couple of years and the problem seems to have disappeared.

  I'll close this thread on the assumption that the problem will not rear its ugly head again.

• Windows hangs after the return of the mode "Eve". Illustrated with BCCode 9f errors

  I have laptop Dell Studio 1555 under Windows 7 Ultimate x 64. The laptop crashes whenever I wake up to "sleep mode" and Windows displays a notification of error with BCCode 9f when restarting. I downloaded a couple of minidumps in this zip-

  https://SkyDrive.live.com/redir?RESID=47083524E19E379D! 132 & authkey =! ALBdqX08T28zvQY

  Need help!

  Hello

  Blue screen can be caused by problems hardware and software, the code of error BCCode: 9f (0x0000009F) occurs because of a mismatch of generation count.

  Refer to the steps in the following Microsoft article.

  Resolve stop (blue screen) errors in Windows 7: http://windows.microsoft.com/en-US/windows7/Resolving-stop-blue-screen-errors-in-Windows-7

  "0x0000009F" stop error message when a computer enters and fate of putting into hibernation in Windows 7 or Windows Server 2008 R2: http://support.microsoft.com/kb/981848

  Notes:

  Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data can be lost.

  When you perform the system restore to restore the computer to a previous state, programs and updates that you have installed are removed.

  Before you perform the upgrade on the spot, I would recommend you to back your files using windows backup.

  Keep us informed on the status of the issue.

• HP ProBook s 4540: the screen goes black after the mode "Eve"

  Hello!

  My computer works fine but there is a problem, when I do not use it for a few hours or maybe an hour my screen goes black and it is nothing to do, but closed and then turn it back on.

  I have disabled all parameters almostly, screenshots here:

  #1- http://i.imgur.com/zelMPLD.png

  #2- http://i.imgur.com/FJNyLzi.png

  I don't know what to do, I think it goes to sleep after a certain time and then he don't wake up, I need to remove the battery and then turn again, he started arrive about 2 days ago when I updated my radeon HD7650 to 15.11.1 Crimson video card driver or sth.

  Hello

  Try disabling the startup of Windows 10 hybrid - you can do the following.

  Open settings and select System.  Select food and sleep, and then click additional power settings - in the next window, click on "Choose what the power button" in the left pane.

  In the next window, click on "Change settings that are currently unavailable" (close), then Remove the check mark from the box against 'Turn on a quick start (recommended) '.  Click on the button Save the settings, close all open windows, and then restart the laptop.

  Kind regards

  DP - K

• Windows 8 | Cannot start windows after the mode "Eve" [Mobile]

  Separated from this thread.

  Hello

  I have the same problem. I put my laptop (windows 8) to sleep and after a few hours when I tried to open it, it was just a white screen. I tried everything you mentioned (windows + w, windows + x, windows + r), but all in vain. Only thing that responds is increase/decrease brightness and volume. Help, please. Also when I try to stop him, he falls asleep.

  Hello

  Thanks for posting the query on Microsoft Community. You have reached the right place. Let us work together to find the cause of this problem and try to solve.

  Update you the drivers for graphics cards?

  If you have not updated the graphic card drivers, then I suggest you to update the drivers of graphics card on the manufacturers website and see if that helps.

  Troubleshoot video card
  http://Windows.Microsoft.com/en-AU/Windows-8/find-install-display-drivers

  I hope this helps. Let us know if you have other problems with Windows in the future.

• L750D-1DQ satellite - black screen after the mode 'sleep'

  My new laptop L750D 1DQ does not start correctly after the return of the mode "Eve".
  The screen is very dark, I can't seem to clear up.

  I tried the combination FN + F7, but it does not work (and other shortcut keys do not work ether).
  When I restart, the screen works again.

  What must I do, so I can start to work after returning from the mode "sleep"?

  Hello

  You are able to change the brightness in Power Options Win 7?

  Check this box:
  http://APS2.toshiba-tro.de/KB0/HTD12017W0001R01.htm

  You can choose a power plant that is enabled in the profile of power you use.
  You will see the option to adjust the brightness of the plan.
  Set the control to the right to increase the brightness. Do this for setting battery and area setting

  In addition, you should go to advanced-> display settings
  Here, you must choose the brightness of the display and need to change the value of %. This defined the default display brightness when battery and AC power running

• T520 not resumed after the mode 'sleep'.

  Hello

  When I close the lid of the machine goes into mode 'sleep'. When I open it back it does not. This happened 2 days ago, and before that everything worked very well. I can hear the fans/hdd from when I open the cover, but the statys display dark and the power button flashes. No matter what I press it does not appear from the mode "Eve". I have to press and hold the power button to force the reboot the machine lose all my currently open applications and documents. Any suggestions on what could be the problem and a fix?

  Thank you!

  Thanks for your reply. I solved the problem, but I'm not exactly sure how. I think that it started after I used it on battery until what drain you completely. It was working fine before that. I have lots of update on the system since the Lenovo Update Manager, shut down the computer, took battery and AC and pressed the power button. All assembled again and booted up normally. Now everything works. I can close the lid causing the laptop to go to sleep and he took over when I open it. No more problems at startup.