Windows 8 | Cannot start windows after the mode "Eve" [Mobile]

Similar Questions

• Windows 7 hangs 3.5 minutes after the mode "Eve"

  Install Windows 7 upgrade from vista. Everything works well, but crashes after the mode 'sleep'. takes 3.5 minutes to thaw. Have a hp pavilion a6707c. Vista was faster to return to that.

  Don't know if this helps, but after I disabled the hybrid sleep I can hibernate and that it only takes 35-40 seconds to resume and everything seems to work fine.

• Windows 8 will start only after the mode 'sleep'

  Hello

  64-bit Windows 8 start I get the Windows logo first. It disappears and then a gray windows appears. Then nothing happens, no drive activity whatsoever. In the continuous boot order I put the laptop in standby mode. After getting it finally starts.

  I'm running Windows 8 64 bits on a Medion Akoya E6221.

  I disabled the closure of the hybrid, but this does not solve the problem.

  Thank you in advance for your help!

  Hans

  Problem solved!
  For some reason I couldn't find a BIOS update. An email on this subject for Medion remained unsanwered.
  Luckily a Microsoft employee on this forum told me that there is a. Applying it did the trick.

• Cannot start weblogic after the change of the control indicator

  I read the article on http://edocs.weblogicfans.net/wls/docs81/secmanage/providers.html#1187595
  I create 2 SQLAuthenticators, MySQLAuthenticator and testSQLAuthenticator (someone told me that it is not necessary to do so. But I just give it a try). In my weblogic 10.3.5, he has 2 authenticators by default, DefaultAuthenticator and DefaultIdentityAsserter.
  
  1, MySQLAuthenticator = testSQLAuthenticator = DefaultAuthenticator = OPTIONAL, weblogic may be starting
  
  2, MySQLAuthenticator = STATUS testSQLAuthenticator = DefaultAuthenticator = OPTIONAL, weblogic is impossible start
  
  3, MySQLAuthenticator is ENOUGH, testSQLAuthenticator is DefaultAuthenticator = OPTIONAL, weblogic may be starting
  
  4, MySQLAuthenticator = testSQLAuthenticator = SUFFICIENT, DefaultAuthenticator = OPTIONAL, weblogic may be starting
  
  5, MySQLAuthenticator = testSQLAuthenticator = DefaultAuthenticator = SUFFICIENT, weblogic may be starting
  
  6, MySQLAuthenticator = REQUIRED testSQLAuthenticator = DefaultAuthenticator = SUFFICIENT, weblogic is impossible start
  
  7, MySQLAuthenticator = REQUIRED testSQLAuthenticator = DefaultAuthenticator = OPTIONAL, weblogic is impossible start
  
  In the article: REQUIRED - if the user passes the test of authentication this authentication provider, other providers are executed, but may fail (with the exception of the authentication providers with control JAAS value REQUIRED indicator)
  
  Why can't I just put REQUIRED and NECESSARY for the authenticators. Where's the harm?

  You can create a group called administrators in your SQLAuthenticator. In this group you can add users, for example,
  WebLogic or other users.

  But as posted before that not really it is recommended that a group of Admins other authenticators that
  the default authenticator.

  Best is to simply add users of the application to your SQLAuthenticator and leave administrators in embedded WebLogic LDAP.

• Cannot start applications after the stolen credit card

  My credit card was stolen and cancelled. I'll probably get a new card tomorrow. Unfortunately I was not aware of the rejected payment my subscription to Adobe.  Although, if I check my online account, it says I need to update my payment information with my new credit card details or my subbscription stop at funtionning on 3 June. Unfortunately, this information was false. Today, May 9, my apps stop functioning. I am unable to continue working on my video projects.

  Is there a way to access my request, while I'm waiting for a new credit card? 50% chance I can update paying info tomorrow, 90% I can update Monday (Bank holliday gives unpredictable delays for a new credit card)

  I'm sorry to hear your credit card and we understand it takes lost time to get a replacement. When you receive your new card, you can update your account information. Instructions to be found in the following document: http://helpx.adobe.com/x-productkb/policy-pricing/membership-subscription-troubleshooting-creative-cloud.html

  However, to solve your problem in the interim, you will need to contact Adobe Support. If you open the link above, you will see a Chat option at the bottom of the document. Click on this button. The agent will be the best person to figure out what to do.

• The VIsta calendar reminder is not pop up after the mode "Eve"

  Hello

  I had put a task reminder in the calendar from Windows Vista program.  But did not recall. I put usually PC mode 'sleep' when finished. So I tested if that did anything. So, I had an appointment for 12:15 and had reminder 5 minutes before.  Put the PC in 'sleep' to 12:00 and he works at 12:20, but the reminder of the calendar has no pop up, even after some time. It arises in place when I open the calendar program.  Even if instead of mode 'sleep', if I shut down the PC and start the reminder immediately opens. If "sleep" mode somehow put reminders in the sleep forever.

  Does anyone have idea about this bug?

  Thank you

  I don't know a solution. It does the same thing for me. I use the Outlook calendar. The Live, or Google Calendar likely would do anything as well.

  Messages rating helps other users

  Mark L. Ferguson MS - MVP

• HP ProBook s 4540: the screen goes black after the mode "Eve"

  Hello!

  My computer works fine but there is a problem, when I do not use it for a few hours or maybe an hour my screen goes black and it is nothing to do, but closed and then turn it back on.

  I have disabled all parameters almostly, screenshots here:

  #1- http://i.imgur.com/zelMPLD.png

  #2- http://i.imgur.com/FJNyLzi.png

  I don't know what to do, I think it goes to sleep after a certain time and then he don't wake up, I need to remove the battery and then turn again, he started arrive about 2 days ago when I updated my radeon HD7650 to 15.11.1 Crimson video card driver or sth.

  Hello

  Try disabling the startup of Windows 10 hybrid - you can do the following.

  Open settings and select System.  Select food and sleep, and then click additional power settings - in the next window, click on "Choose what the power button" in the left pane.

  In the next window, click on "Change settings that are currently unavailable" (close), then Remove the check mark from the box against 'Turn on a quick start (recommended) '.  Click on the button Save the settings, close all open windows, and then restart the laptop.

  Kind regards

  DP - K

• Vista wireless loses Internet access after the mode "Eve".

  Environment:
  HP Pavilion dv2610ca notebook PC, broadcom 802. 11 b / g adapter, Vista Home Premium 32 bit SP2, Siemens Gigaset SE567 router/modem.

  Problem:
  I can usually connect wirelessly to my home network and to the Internet whenever I start my computer. However, I have close the lid and leave it in standby mode, I can't access Internet after I opened the lid and the system wakes up. The system connects to my home network but cannot access the Internet. It shows a Local access only.

  Diagnosis and repair fails generally, telling me that I have a problem with my router. Disconnect, then reconnect usually works. My router power market also works.

  I saw lots and lots of issues with Vista wireless networks and I followed several of the recommended actions:
  -updated the driver broadcom
  -reset the IP stack by using the tool "Fixit" of Microsoft
  -disabled the use of IPv6 in two by disabling the check marks in the related devices and changing the registry TCPIP6 parameters
  -modified the registry to activate/disable the DHCP broadcast flag in the TCPIP Interfaces
  -J' tell the system not to disable the card Broadcom, but the "Power management" tab mentioned in some articles does not appear in its properties. The only reference to power is "Minimum energy" under the "Advanced" tab, then I disabled who.

  Nothing has solved the problem.

  Has anyone else had this problem and fixed it?

  I'm not a technical Wizard, so please provide instructions for any action that you suggest.

  Thank you.

  I replaced the Siemens router/modem provided by my ISP (Telus) with an old D-Link router and separate modem 3Comm I had been using a couple of years and the problem seems to have disappeared.

  I'll close this thread on the assumption that the problem will not rear its ugly head again.

• keyboard & mouse freeze after the mode 'sleep', using Windows Vista 64 home premium

  keyboard & mouse freeze after the mode "sleep", using Windows Vista 64 home premium.  I received once posted this question, an answer of "fix" to a thread that has worked.  Unfortunately, I deleted the thread. I swapped the USB connectors for mouse and keyboard, but that didn't change anything.  Could someone please re - send the wire?  I promise you that I'm deleting it this time.

  Thank you very much

  E-mail address is removed from the privacy *.

  Hi RICH0214,

  Follow these methods.

  Method 1: Follow the steps in the article.

  Device Manager does not display devices that are not connected to the Windows XP-based computer

  http://support.Microsoft.com/kb/315539 (applies to Windows Vista)

  Method 2: Scan the file system (CFS) auditor to repair corrupted files.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  Method 3: Create a new user account.

  Create a user account

  http://Windows.Microsoft.com/en-us/Windows-Vista/create-a-user-account

  If the problem is resolved in a new user account, and then follow the article on how to fix a corrupted user account.

  Difficulty of a corrupted user profile

  http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profile

• Missing "Libraries" in the drop-down window after the 2015.1.2 exit. How can I fix it? Thank you.

  Missing "Libraries" in the drop-down window after the 2015.1.2 exit. How can I fix it? Thank you.

  Hi penn,.

  Please try and reset the Photoshop preferences to default.

  To re-create the Photoshop preferences files, start the application while pressing Ctrl + Alt + Shift (Windows) or command + Option + shift (Mac OS). Then, click Yes to the message, "Delete the Adobe Photoshop settings file?"

  In addition, let us know the version of operating system that you are using now.

  Let us know if that helps.

  Kind regards

  Mohit

• ulitmate local Vista only after the mode "sleep" loses the IP address each time.

  Ulitmate Vista wired ethernet.  After the mode 'sleep', 'local only' on awake.  Loses to IP address each time.  IP address needs to be reset.

  Hi C.Jaye,

  You can check out the following link and try the steps to solve the problem:

  http://social.answers.Microsoft.com/forums/en-us/vistanetworking/thread/f21fcdda-4372-469d-b983-f4bd50d7f81d

  You can also read the following article and check if it helps:

  Windows Vista cannot obtain an IP address from certain routers or some non-Microsoft DHCP servers

  http://support.Microsoft.com/kb/928233

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• L750D-1DQ satellite - black screen after the mode 'sleep'

  My new laptop L750D 1DQ does not start correctly after the return of the mode "Eve".
  The screen is very dark, I can't seem to clear up.

  I tried the combination FN + F7, but it does not work (and other shortcut keys do not work ether).
  When I restart, the screen works again.

  What must I do, so I can start to work after returning from the mode "sleep"?

  Hello

  You are able to change the brightness in Power Options Win 7?

  Check this box:
  http://APS2.toshiba-tro.de/KB0/HTD12017W0001R01.htm

  You can choose a power plant that is enabled in the profile of power you use.
  You will see the option to adjust the brightness of the plan.
  Set the control to the right to increase the brightness. Do this for setting battery and area setting

  In addition, you should go to advanced-> display settings
  Here, you must choose the brightness of the display and need to change the value of %. This defined the default display brightness when battery and AC power running

• T520 not resumed after the mode 'sleep'.

  Hello

  When I close the lid of the machine goes into mode 'sleep'. When I open it back it does not. This happened 2 days ago, and before that everything worked very well. I can hear the fans/hdd from when I open the cover, but the statys display dark and the power button flashes. No matter what I press it does not appear from the mode "Eve". I have to press and hold the power button to force the reboot the machine lose all my currently open applications and documents. Any suggestions on what could be the problem and a fix?

  Thank you!

  Thanks for your reply. I solved the problem, but I'm not exactly sure how. I think that it started after I used it on battery until what drain you completely. It was working fine before that. I have lots of update on the system since the Lenovo Update Manager, shut down the computer, took battery and AC and pressed the power button. All assembled again and booted up normally. Now everything works. I can close the lid causing the laptop to go to sleep and he took over when I open it. No more problems at startup.

• Satellite A210-199 does not start successfully after the BIOS update

  Hello

  I've got Sat A210-199.
  Yesterday I updated the BIOS, and after that problems occurred:

  While restarting my computer does not start. When I enter the BIOS after a while, it shuts down.
  I guess all this because the temperature of the CPU:

  When I do nothing it is 77 C. I don't think it's normal: (.)
  Computer is very recent, so it's probably not dust inside. And it's so hot from the start, but after the new BIOS, something bad happens.

  Why this temp is so high?
  There is no any process background or something.
  Is this normal?
  And what about this new BIOS?

  To be honest, something like this should not happen. I really don't understand why this is happening. I have updated the BIOS on friends A200 and mine P200 and everything works fine. Here on this forum we can only speculate on this issue, but what you need exactly's professional opinion.

  This probably not help but install recovery image and check with the factory settings. Make sure you also on the lower side cooling fan is not blocked and the laptop can be cooled properly. If the problem persists, you should contact the nearest authorized maintainer and clarify this issue.

  Sorry, but I don't really know what you can do in this situation. I don't see any other way to solve this problem.

  Good luck!

• Problem with XNET start VI after the creation of sessions

  I have a timed loop sending CAN messages via XNET screws. It works great, but I always lose the very first message. It matters little, I send the first message immediately after you create the XNET session or after a few milliseconds.

  The attached screenshot shows the initialization of my four sessions XNET. Although I am starting before the session with an XNET start VI, there is without success to get the first message.

  It seems that the sessions/CAN (selectable cards and HS CAN) interfaces are initialized only after the first call to write XNET. XNET write seems to imply XNET start (see documentation), but the appellant XNET start manually after the creation of sessions does not help.

  What I'm missing to get the interfaces online and ready before you send anything?

  I was able to solve this problem because they did not actually XNET screw sorry for this post.