count the signed iterations

Similar Questions

• How to count the time exactly?

  I tried to count the time using a VI like the one attached.

  It's that's not couting correctly. There is a possible reason, I have observed.

  The computer isn't able to handle the VI as soon as necessary.

  I thought about this because, when in edit mode the time count was very bad, and, when I created an application and installed, it ran okay, how 'light '. But today, when I tried to use this application with an old computer it did not work. The clock is slow.

  Is it possible to count the time correctly?

  I use a DAQ6009 to make my works, my VI is big enough and I need one iteration to each 1 ms (milliseconds) as I am with digital inputs from 5 events of coders (I know that's not the right way to count the encoders, but it's the only way I can do it, and it works).

  Thank you in advace! I hope you can help me!

  Hugs!

  Ok.  I will try to help you understand certain things.

  The number of cycles and wait (and wait until the next ms Multiple) functions all use a 1 kHz derived from the clock of the processor clock. The accuracy of these clocks is not large, although they are probably similar to the precision of the stopwatch.  Any time generated by these functions will show some differences in the time of the clock as it is derived from a different oscillator.

  Updates from the front panel are time by LabVIEW and the operating system. Most of the screens are updated with 60 to 80 times per second, maximum. What made the operating system, an update of the screen might be delayed by 10s of milliseconds or more.  It is certain that not all of the values at the end of the Add function will be displayed.

  Wait for him until the next ms many will wait more than 1 ms if the other code in the loop takes longer than 1 ms.  I don't know, but I think that the indicator is buffered so that any delay by the operating system to update the display should not slow down the loop. I tried to remove the flag, and it doesn't seem to make a big difference.

  I modified your VI to provide several indications of the performance. First of all, I added to the sequence of three-frame structure to allow synchronization of the loop. Second, I changed to a loop which runs a specified number of iterations. Thirdly, I hooked up the output of the timer until the next ms Multiple to a tunnel of autoindexing allowing a record of the time of each iteration appears in the table of ticks. I calculated the differences between successive instants and poster on a chart, so that you can see the performance.

  I didn't want to sound criticism of your use of English.  You write in English, much better than I could in your language!  What I was trying to make is that such general descriptions that ' Besides correctly ' without quantitative results or evidence in support of the application do not have enough information to help us help you.

  Lynn

• Cannot install the signed file BAR, [if the argument "blackberry - sign - sigfile ' is not GPACACF]

  Hi all

  I have following queries on the use of certificates in BAR files.  Certificates are defined by the user.  [ie. certificates created locally using this link 'http://developer.blackberry.com/native/documentation/core/com.qnx.doc.nfc/topic/manual/t_nfcdevguide...

  Queries are

  1. the '-sigfile "command argument"blackberry-signer", if I have any other purpose than"GPACACF", I get the error message following ' result::failure 880/var/tmp/cgic851170: cannot access the Member ' META-INF/FILEACF.» EC'

   

     2 can I sign several certificates [one after the other] using the command "blackberry-signatory"?

  Forward to your response

  OK, I tested the procedure in the documentation and created a file of key PKCS #12 and gave my key an aliass MYALIAS. See the details here:

  $ openssl pkcs12 -in selfsign.p12 -info
  Enter Import Password:
  MAC Iteration 2048
  MAC verified OK
  PKCS7 Encrypted data: pbeWithSHA1And40BitRC2-CBC, Iteration 2048
  Certificate bag
  Bag Attributes
      friendlyName: MYALIAS
      localKeyID: D8 CB 15 E1 B3 30 0C 90 C0 57 EB FA A1 D4 20 BB 1C EF A7 40
  subject=/C=GB/ST=Berkshire/L=Slough/O=BlackBerry/OU=DevReel/CN=Test/[email protected]
  issuer=/C=GB/ST=Berkshire/L=Slough/O=BlackBerry/OU=DevReel/CN=Test/[email protected]
  -----BEGIN CERTIFICATE-----
  MIICgTCCAeoCCQDgvIXlO1lIYDANBgkqhkiG9w0BAQUFADCBhDELMAkGA1UEBhMC
  R0IxEjAQBgNVBAgMCUJlcmtzaGlyZTEPMA0GA1UEBwwGU2xvdWdoMRMwEQYDVQQK
  DApCbGFja0JlcnJ5MRAwDgYDVQQLDAdEZXZSZWVsMQ0wCwYDVQQDDARUZXN0MRow
  GAYJKoZIhvcNAQkBFgtmb29AYmFyLmNvbTAeFw0xMzA4MTYxMTQ0MjFaFw0xNDA4
  MTYxMTQ0MjFaMIGEMQswCQYDVQQGEwJHQjESMBAGA1UECAwJQmVya3NoaXJlMQ8w
  DQYDVQQHDAZTbG91Z2gxEzARBgNVBAoMCkJsYWNrQmVycnkxEDAOBgNVBAsMB0Rl
  dlJlZWwxDTALBgNVBAMMBFRlc3QxGjAYBgkqhkiG9w0BCQEWC2Zvb0BiYXIuY29t
  MIGfMA0GCSqGSIb3DQEBAQUAA4GNADCBiQKBgQDskC5uCv6eGgZvrXpWJsXz11HK
  POCraWH7QfWEaa/d82SusTVVL2UEqcWhRKHGD3ogikyQ+p4MiCKViYKXG2067nfv
  C+yNUupinb7Bsx/YsUp5zv135fpMXn9rSD/P5LegQONxVqeW5ZoSc3br4JAmYoFq
  uwnNQJl+0AeD7HUjUQIDAQABMA0GCSqGSIb3DQEBBQUAA4GBAKSKibcQgvho0kPU
  E53TWjiVTOxxMzpu2F3/y1McEeOwg0bvTvfoGm3fFJnVM/B1509QgEVenSuO4Am8
  CrF9MCdRA8HJeAw2P7YHSwRgc9nn1HqkqF1McRi+DVCwIfWUFCyD9Wllb5PWPlkD
  voqNLCtuuYRyoIGq+gANBXLOlg1m
  -----END CERTIFICATE-----
  PKCS7 Data
  Shrouded Keybag: pbeWithSHA1And3-KeyTripleDES-CBC, Iteration 2048
  Bag Attributes
      friendlyName: MYALIAS
      localKeyID: D8 CB 15 E1 B3 30 0C 90 C0 57 EB FA A1 D4 20 BB 1C EF A7 40
  Key Attributes: 
  

  I then used blackberry - sign to sign a file bar:

  >> blackberry-signer -keystore selfsign.p12 -sigfile GPACACF -sigalg SHA512withRSA -storepass barfoo -verbose NfcChicken-1_0_0_20.bar MYALIAS
  SF Digest =
  4e 0e 9c 25 a5 2e 0a 1a b9 c0 d2 f8 7c 9e 05 e1
  65 39 eb 92 4e 1d db d8 9d 11 f5 8f 84 b0 92 75
  48 3e 53 40 b6 e3 b9 cc bd 6e 7e 61 95 7b ba d5
  6e b1 76 be b6 c5 d9 a7 ac f3 ad c0 1f fd e7 8a
   Updating: META-INF/MANIFEST.MF
     Adding: META-INF/GPACACF.SF
     Adding: META-INF/GPACACF.RSA
    Signing: native/bar-descriptor.xml
    Signing: native/icon.png
    Signing: native/assets/images/brown_egg.png
    Signing: native/assets/images/Thumbs.db
    Signing: native/assets/main.qml
    Signing: native/assets/sounds/chicken1.wav
    Signing: native/qm/NfcChicken.qm
    Signing: native/NfcChicken.so
    Signing: native/assets/.assets.index
  Info: Bar signed.
  

  If you look at the signed file bar, you can see the GPACACF. SF and. RSA files in the manifesto bar.

  

  If I use the following command

  >>blackberry-signer -keystore selfsign.p12 -sigfile XYZ -sigalg SHA512withRSA
  -storepass barfoo -verbose NfcChicken-1_0_0_20.bar MYALIAS
  SF Digest =
  4e 0e 9c 25 a5 2e 0a 1a b9 c0 d2 f8 7c 9e 05 e1
  65 39 eb 92 4e 1d db d8 9d 11 f5 8f 84 b0 92 75
  48 3e 53 40 b6 e3 b9 cc bd 6e 7e 61 95 7b ba d5
  6e b1 76 be b6 c5 d9 a7 ac f3 ad c0 1f fd e7 8a
   Updating: META-INF/MANIFEST.MF
     Adding: META-INF/XYZ.SF
     Adding: META-INF/XYZ.RSA
    Signing: native/bar-descriptor.xml
    Signing: native/icon.png
    Signing: native/assets/images/brown_egg.png
    Signing: native/assets/images/Thumbs.db
    Signing: native/assets/main.qml
    Signing: native/assets/sounds/chicken1.wav
    Signing: native/qm/NfcChicken.qm
    Signing: native/NfcChicken.so
    Signing: native/assets/.assets.index
  Info: Bar signed.
  

  using a sigfile - XYZ to sign the file bar and the bar file contains:

  

  showing the XYZ. SF and. RSA files added to the clear bar.

  I don't see the error that you notice.

  The documentation notes that this form of blackberry-signer syntax is available only on recent versions of th emost of this command. I ran these commands on the current beta version 10.2 public but it should work with 10.1.

  What version of the SDK yuou use?

• How to count the number of updates in a loop Forall

  Hi friends

  I want to know is - it possible to count the number of updates occurred in FORALL. I share the codes below. His only return the iteration number. If I spend 5 through the values of the PARAMETERS and 2 updates the values in the table then return 5 instead of 2.  My requirement is to count the number of updates have taken place and return this value to OUTPUT parameter. If possible, please share codes. Thank you very much...

  CREATE OR REPLACE PROCEDURE UPDATE_PROCESS_RATE 
            (
             V_HOSPITAL_ID IN HOSPITAL_SERVICE_MASTER.HOSPITAL_ID%TYPE,
             V_USER IN VARCHAR2,
             V_DATE IN DATE,
             V_PROCESS_ID  IN VARR_ARRAY,
             V_PROCESS_RATE IN NUM_ARRAY,
             V_NUM OUT NUMBER
             )
  
  
              IS
  
                  V_ERROR_CODE NUMBER(15);
                  V_ERROR_MSG VARCHAR2(200);
                  V_ARRAY_ID NUMBER(10,2);
                  V_TOTAL NUMBER:=0;                                            
     BEGIN
                SAVEPOINT Sp1;
           BEGIN
     
                 FORALL i IN V_PROCESS_RATE.FIRST..V_PROCESS_RATE.LAST
               
                             UPDATE HOSPITAL_SUBSERVICE_PROCESS M 
                             SET M.PROCESS_CHARGE=V_PROCESS_RATE(i)
                             WHERE M.HOSPITAL_ID=V_HOSPITAL_ID
                             AND M.HOSPITAL_PROCESS_ID =V_PROCESS_ID(i);
                                                      
                 FOR i IN V_PROCESS_RATE.FIRST..V_PROCESS_RATE.LAST LOOP
              
                     V_TOTAL:=V_TOTAL + SQL%BULK_ROWCOUNT(i);
                 End loop;
             
                     COMMIT;  
                     V_NUM:=V_TOTAL;           
  
  
  
  
  

  IndiMinds wrote:

  But my requirement is: it must count the update only when it detects a different value from array. When it detects a different value in the table must be updated and count it and if the update of the table value is similar the TI should not count it.

  For example, if the V_PROCESS_RATE table have these 3 values (10,20,30) and we need to update these 3 values with (10,40,50), so no update, it should return is 2 not 3.

  Thank you

  And then don't update these lines, change your update statement

  UPDATE HOSPITAL_SUBSERVICE_PROCESS M
  SET M.PROCESS_CHARGE=V_PROCESS_RATE(i)
  WHERE M.HOSPITAL_ID=V_HOSPITAL_ID
  AND M.HOSPITAL_PROCESS_ID =V_PROCESS_ID(i)
  AND DECODE(M.PROCESS_CHARGE,V_PROCESS_RATE(i),0,1) = 1;
  

• Simple counting the stopwatch will not stop.

  Hello

  I made a simple countdown timer, it works fine but I wish I had the sign next to the number % so it would look like a pre-order. But as I add the '%' sign to the function, the counting stops (100% more) ever and continues to count.

  What Miss me?

  var count: Number = 1;
  var myTimer:Timer = new Timer (10);

  myTimer.addEventListener (TimerEvent.TIMER, count);
  myTimer.start ();

  function countdown(event:TimerEvent):void {}

  myText_txt.text = String ((count) + myTimer.currentCount);

  myText_txt.text = String ((count) + myTimer.currentCount)+'%';

  
  If (uint (myText_txt.text) > = 100) {}
  myTimer.removeEventListener (TimerEvent.TIMER, count);
  }

  
  }

  Thank you!

  You should learn to use the trace() function to see why things don't work as expected.   The '%' is converting it to a uint not what you expect.  Trace uint (myText_txt.text) and you'll see why comparing the value of a string uint digital a number isn't going to work.  Try instead the following...

  var count: Number = 1;
  var myTimer:Timer = new Timer (10);

  myTimer.addEventListener (TimerEvent.TIMER, count);

  myTimer.start ();

  function countdown(event:TimerEvent):void {}

  myText_txt.text = String ((count) + myTimer.currentCount) + '% ';

  If (uint (String (+ myTimer.currentCount (County))) > = 100) {}
  myTimer.removeEventListener (TimerEvent.TIMER, count);
  }

  }

• How to shorten the height of the sign of worms there used one - less button to click on and it's gone!

  The panel indicating question and answer that is too high and takes too much space. There was formerly a - (less) button to shorten and he went to this new version. How can I get that back?

  This longer, less the signs were there if you have installed the add-in on Compact records.
  Maybe the update disabled Thunderbird this addition on / add must be updated also.
  Check your add tab to see what is said about this add on.

• When I click on the sign more to open a new tab. The tab opens with bing pg and I hate bing. How can I stop thiis doesn't happen.

  When I click on the sign more to open a new tab. The tab opens with bing pg and I hate bing. How can I stop thiis doesn't happen. I can find nothing to help even had a computer tech friend check.

  Looks like your pref browser.newtab.url has been changed.

  This extension will reset some prefs to the value default - browser.newtab.url - is covered. See "on this add-on" for more details.
  https://addons.Mozilla.org/en-us/Firefox/addon/SearchReset/

  It will run automatically and then disappear.

• the sign "more" to open a new tab disappeared. That's happened?

  the sign "more" to open a new tab disappeared. That's happened? How can this be repaired?

  Try clicking on default settings in the palette to customize window.

  • Firefox '3-bar' menu button > customize
  • View > toolbars > customize
  • https://support.Mozilla.org/KB/customize-Firefox-controls-buttons-and-toolbars

• the sign less, shrink, & out the buttons at the top right of the page is missing? How to make a comeback. In their place, it is only black?

  the sign less, shrink, & out the buttons at the top right of the page is missing? How to make a comeback. In their place, it is only black? I can click where I know everyone is & it works, but I need to be able to see them. Thanks for your help.

  
  

• When I click on the + sign, I don't get another tab even if an extra tab open if, for example, I click on a link in an e-mail or on a website.

  Before the last update, I could open a new tab by clicking on the + sign to the right of any open tabs. None. Nothing happens. If I click on a link in an e-mail or on a Web site, however, a new tab opens. For example, if I get an email from Facebook that says that someone has posted, and I click on the link, I'll get a new tab open, and Facebook will be there. Then I have two tabs open and can navigate on either without problem. If I click on the + sign, all nothing happens. I am perfectly able to open Safari with Firefox running and I get several tabs to get there without effect on Firefox. In other words, I can come and go.

  I'm grateful for any help! Thank you.

  Get rid of this extension.
  Produtools Manual 2.1 Community Toolbar 3.21.0.1

  Community toolbar extensions are known to cause that in Firefox 30.

• I use a Mac and Apple for some reason any since yesterday, I am unable to open new browser windows by pressing on the + sign on my top bar can help you please

  I download the new version of Firefox 2 days until then I could open the windows of the browser at the top of the page by clicking on the + sign, however, if I need a new window now I have to go for example on facebook, click on an ad that will open a new browser page and use it?

  Hello

  I'm glad to hear that your problem has been resolved.

  If you have not already the case, please mark this thread as solved by the solution of marking.
  
  This will help other users experience similar problems helps to find faster and more efficiently.

  I hope that you will continue using our products and we thank you for contacting the Mozilla Support.

• How can I count the custom order?

  I'm counting the number of names that appear in all the columns in the table

  Each cell contains the name of a single individual, like the first column: 1-01, the second columns: 1-02, etc.

  Can someone help me with the formula to measure? What would be the correct formula for this?

  Thank you very much.

  Hi the learner,

  "I'm trying to count the number of names that appear in all the columns in the table

  Each cell contains the name of a single individual, like the first column: 1-01, the second columns: 1-02, etc.. »

  Your goal is not clear.

  What do you mean by ' count number per ordercustom?

  You want a single indictment which only has the names that appear in each column?

  Do you want counts of the number of names appearing in each column (ie. a separate head for each column)?

  You want a counter of the number of all the names on the table?

  Or is that what you want different from all this?

  "Each cell contains the name of a single individual."

  Not mean there is no empty cell?

  This means that there are no cells that contain data that is not the name of an individual?

  I do not understand the connection between "1-01", "1-02 ' and the names in the cells.

  Please specify.

  Kind regards

  Barry

• By using the sign + in the toolbar

  By using the sign + in the top right of my screen to view my favorites. Now it shows apples sales Page, every time I click on it. How can I change it to watch my favorites?

  I guess you are in Safari and you're clicking on the sign '+' opens a new tab.

  If that's true, you have to go on Safari-> Preferences-> general and set the option "open new tabs with ' to 'Top Sites '.

  

• When I click on the + sign to open a new tab, all of my most visited sites are empty

  When I click on the sign + to open a new tab all my most visited sites are the blank page. I know that there is a parameter in the config which is set to false, and must change. I don't remember who it is, can you help me?

  1. In the address bar, type Subject: config and press enter. The subject: config "this might void your warranty!" warning page may appear.
  2. Click on I'll be careful, I promise!, to continue on the subject: config page.

  Search for the string "browser.newtabpage.enabled" and set the value to 'true '.

  Solved?

• I used to be able to click on the sign in tab + and it should open up a window with my sites most visted. After update now if it opens on a blank page. Why?

  I used to be able to click on the sign in tab + and it should open up a window with my sites most visted. After update now if it opens on a blank page. Why?

  1. In the address bar, type Subject: config and press enter. The subject: config "this might void your warranty!" warning page may appear.
  2. Click on I'll be careful, I promise!, to continue on the subject: config page.

  Then search for the string "browser.newtabpage.enabled" right click, click Reset.
  Also search "browser.newtab.url" right click, click Reset. Restart firefox. Now it must wok