Countdown to deadline date

Similar Questions

• Determine the next deadline Date

  I have a table that contains the definition of the schedule, a schedule defines when a document should be submitted to a specific part. The definition of annex contains a start date and end date, a type of recurrence (is pointed it out a time or on a recurring schedule) and the frequency to which the document should be filed. The second table provides a history of comments, this option stores while it was due and when it was received. Earlier this month, pre-fill us the layout table with a list of records that will be due for the month. For example, on 1 September look us through all schedules and determine which ones would have a record due to a certain point in the 9/12 and then to create a record in the presentation table.
  
  I have questions, the calculated the tender documents list to work properly.
  
  The DDL and DML will be in a follow up post
  
  Here's the query I use currently and is unable to work properly.
  

       with schedules as (
         -- generate a list of valid permit schedules
         select s.schedule_id,s.submittal_frequency_months,s.recurrence_type,
         s.first_due_date,s.requires_approval,
         round(round(months_between(to_date('09/01/2012','mm/dd/yyyy'),s.first_due_date))/decode(s.submittal_frequency_months,0,1,s.submittal_frequency_months)) recurrence_number
         from permit p join schedule s on (p.permit_id=s.permit_id)
         where p.permit_id=nvl(:p_permit_id,p.permit_id)
         and p.permit_status_type_id=1 -- only active permit
         and s.recurrence_type in ('One Time', 'Recurring') -- submittals with a defined schedule
         and coalesce(s.last_due_date,sysdate) >= sysdate -- only submittals whose last due date has not passed, null last date included
         and trunc(s.first_due_date,'mm') <= to_date('09/01/2012','mm/dd/yyyy') -- only valid start dates
         --and round(round(months_between(to_date('09/01/2012','mm/dd/yyyy'),s.first_due_date))/decode(s.submittal_frequency_months,0,1,s.submittal_frequency_months)) >0
         )
       -- create a list of all potential due dates for these schedules
       select submittal_id_seq.nextval,schedule_Id,8,requires_approval,
       case 
        when recurrence_type='One Time' 
          then first_due_date
        when recurrence_type='Recurring' and trunc(first_due_date)=to_date('09/01/2012','mm/dd/yyyy')
          then first_due_date
        else add_months(first_due_date,(submittal_frequency_months*d.iteration)) 
       end next_due_Date,user,sysdate,user,sysdate
       from schedules cross join (select level iteration from dual connect by level <= (select max(schedules.recurrence_number) from schedules)) d
       where schedules.recurrence_number <=d.iteration
       and 
       trunc(case 
        when recurrence_type='One Time' 
          then first_due_date
        when recurrence_type='Recurring' and trunc(first_due_date)=to_date('09/01/2012','mm/dd/yyyy')
          then first_due_date
        else add_months(first_due_date,(submittal_frequency_months*d.iteration)) end,'mm') = to_date('09/01/2012','mm/dd/yyyy') -- limit the records to the date in question
       and not exists
       (select null from submittal sub
        where sub.schedule_id=schedules.schedule_id
        and trunc(sub.due_date,'mm')=to_date('09/01/2012','mm/dd/yyyy'))
        -- exclude those that already have a submittal record
  ;

  Basically I found all possible records in the table in the annex that could have a record expected in September, and then generate a result for all possible instances and then look at only those whose calculated due date is 01/09/2012. I have determined that the root problem, I have right now is this line:
  
  
  (select level iteration of double connect by level < = (select max (schedules.recurrence_number) of planning)) d
  
  ID of the 469907 planning has a start date of 15/05/1992 and a frequency of all 2 months. I calculate what I call the number of recurrence, i.e. the number of times that the calendar has occurred since its beginning now. I use to make a calculation of add_months from the start date and then finally compare the start dates of these calculated with my month of target (09/12). In this one case records the calculated number of recurrence is 122. Then when I generate the connect by level is 122 records for each schedule, so I end up with duplicate records in the presentation for many schedule table. This current request could probably work if I could find a way to make the specific annex level ID, but I did not that far.
  
  Besides the fact that it returns erroneous results, I think that there must be a better, more efficient method to determine which records are due for a given month. I thought there are probably some great way to use the clause type here, but I don't have a knowledge on that one yet.
  
  If you run the insert statement what follows, you will see that it inserts more than 2,400 records:

  insert into submittal (submittal_id,schedule_id,submittal_status_type_id,requires_approval,due_date,created_by,created_date,modified_by,modified_Date)
       with schedules as (
         -- generate a list of valid permit schedules
         select s.schedule_id,s.submittal_frequency_months,s.recurrence_type,
         s.first_due_date,s.requires_approval,
         round(round(months_between(to_date('09/01/2012','mm/dd/yyyy'),s.first_due_date))/decode(s.submittal_frequency_months,0,1,s.submittal_frequency_months)) recurrence_number
         from permit p join schedule s on (p.permit_id=s.permit_id)
         where p.permit_id=nvl(:p_permit_id,p.permit_id)
         and p.permit_status_type_id=1 -- only active permit
         and s.recurrence_type in ('One Time', 'Recurring') -- submittals with a defined schedule
         and coalesce(s.last_due_date,sysdate) >= sysdate -- only submittals whose last due date has not passed, null last date included
         and trunc(s.first_due_date,'mm') <= to_date('09/01/2012','mm/dd/yyyy') -- only valid start dates
         --and round(round(months_between(to_date('09/01/2012','mm/dd/yyyy'),s.first_due_date))/decode(s.submittal_frequency_months,0,1,s.submittal_frequency_months)) >0
         )
       -- create a list of all potential due dates for these schedules
       select submittal_id_seq.nextval,schedule_Id,8,requires_approval,
       case 
        when recurrence_type='One Time' 
          then first_due_date
        when recurrence_type='Recurring' and trunc(first_due_date)=to_date('09/01/2012','mm/dd/yyyy')
          then first_due_date
        else add_months(first_due_date,(submittal_frequency_months*d.iteration)) 
       end next_due_Date,user,sysdate,user,sysdate
       from schedules cross join (select level iteration from dual connect by level <= (select max(schedules.recurrence_number) from schedules)) d
       where schedules.recurrence_number <=d.iteration
       and 
       trunc(case 
        when recurrence_type='One Time' 
          then first_due_date
        when recurrence_type='Recurring' and trunc(first_due_date)=to_date('09/01/2012','mm/dd/yyyy')
          then first_due_date
        else add_months(first_due_date,(submittal_frequency_months*d.iteration)) end,'mm') = to_date('09/01/2012','mm/dd/yyyy') -- limit the records to the date in question
       and not exists
       (select null from submittal sub
        where sub.schedule_id=schedules.schedule_id
        and trunc(sub.due_date,'mm')=to_date('09/01/2012','mm/dd/yyyy'))
  ;

  You can see the problem after the words:

  select schedule_id,count(0)
  from submittal
  where trunc(due_date,'mm')=to_date('09/01/2012','mm/dd/yyyy')
  and submittal_status_type_id=8
  having count(0) >1
  group by schedule_id;

  Tony

  Hello

  I think you want something like Bob solution. To avoid any computation MONTHS_BETWEEN again and again, you can do it once, in a subquery, like this:

  WITH     got_month_num     AS
  (
       SELECT     schedule_id, rec_type, rec_months, first_due_date
       ,     MONTHS_BETWEEN ( TRUNC (SYSDATE,        'MONTH')
                        , TRUNC (first_due_date, 'MONTH')
                        )       AS month_num
       FROM    schedule
  --     WHERE     ...     -- If you need any filtering, put it here
  )
  SELECT     schedule_id, rec_type, rec_months, first_due_date
  ,     ADD_MONTHS (first_due_date, month_num)     AS this_due_date
  ,     FLOOR ((month_num + 1) / rec_months)     AS iteration
  FROM     got_month_num
  WHERE     MOD ( month_num
           , CASE
                 WHEN  rec_type = 'Rec'  THEN  rec_months
                                  ELSE  month_num + 1
             END
           ) = 0
  ;
  

  The WHERE clause in the main query ensures that you will only get results that have a current month end_date.

  Using the sample data that Bob posted, the result is:

  SCHEDULE_ID REC REC_MONTHS FIRST_DUE THIS_DUE_  ITERATION
  ----------- --- ---------- --------- --------- ----------
            4 One          1 16-SEP-12 16-SEP-12          1
  

  Schedule_id = 1 is not due until January and schedule_id = 2 is not due until November.

  Published by: Frank Kulash, Sep 12, 2012 13:08
  Column corrected iteration. (You can't that column, anyway.)

• in the query and parent/child relationship

  WITH the data AS

  (

  SELECT '213NY1' lfrom, NULL, '215ZVD' mi lto, "215ZV9 ' id, 1 January 2014' sdate, January 2, 2014' edate, 3 January, 2014 'mdate' January 5, 2014 medate double UNION ALL.

  Lfrom SELECT NULL, '215ZVD' mi, id "213NY1", "215ZV9" lto 4 January 2014 'sdate', 6 January 2014 edate, January 7, 2014 'mdate', 8 January 2014 medate double UNION ALL

  SELECT '216TVZ' lfrom, NULL, "213JW7" e "217LVQ" id lto, 21 January, 2014 'sdate' January 9, 2014 edate, 10 January 2014 'mdate', 11 January 2014 medate double UNION ALL

  SELECT lfrom "215Y71", "217LVQ" lto, mi, "216TVZ" id "213JW7", 22 January, 2014 'sdate' January 23, 2014 edate, 24 January, 2014 'mdate' January 25, 2014 medate double UNION ALL

  SELECT '234IJF' lfrom, NULL, "234YU" e "3IUED" id lto, 26 January 2014 'sdate', 27 January 2014 edate, 28 January 2014 'mdate', 29 January 2014 medate OF double

  )

  some lines have parent/child relationship and some does not. for example, the first two query (data) are link together. online, the value of lto (215ZV9) corresponds to the id value

  in line 1.  the value of lfrom in row1 (213NY1) corresponds to the value of online id.

  the same scenario occurs in rows 3 and 4.  5th doesn't have any line which is a child. tier 5 is a single parent

  I want to WRITE a query that gives the following result.

  Mid id initial_date final_date

  =======================================

  215ZVD 215ZV9 1 January 2014 "January 5, 2014"

  "215ZVD 213NY1 7 January 2014" January 6, 2014 "

  "213JW7 217LVQ 21 January 2014 ' 11 January 2014"

  "213JW7 216TVZ 24 January 2014 ' 23 January 2014"

  "234YU 3IUED 26 January 2014 ' 27 January 2014"

  ONLY WHEN there is a parent/child relationship, initial DATE AND follow the final data WHAT such as

  FIRST date of deadline DATE

  < Mdate > < EDate > - for child

  < SDate > < MEDate > - for parent

  WHEN there is no relationship of parent/child (e.g. ONLY a parent ROW) THEN

  FIRST date of deadline DATE

  < SDate > < EDate-> parent

  can someone help me write a query for the above output

  with tt AS

  (SELECT a.*,

  ROW_NUMBER () ON LV (MIDDLE ORDER BY SDATE PARTITION),

  CASE

  WHEN ID = NVL (ADVANCE (lto, 1) OVER (PARTITION BY Middle ORDER BY sdate), LAG (lfrom) OVER (ORDER BY sdate Middle PARTITION))

  THEN 1

  END flg

  DATA one

  )

  SELECT THE MIDDLE,

  ID,

  CASE

  WHEN flg IS NOT NULL

  THEN

  CASE

  WHAT LV = 1

  THEN SDATE

  WHAT LV = 2

  THEN mDATE

  END

  Of ANOTHER sdate

  END INITIALDATE

  CASE

  WHEN flg IS NOT NULL

  THEN

  CASE

  WHAT LV = 1

  THEN mEDATE

  WHAT LV = 2

  THEN EDATE

  END

  Of ANOTHER edate

  END FINALDATE

  TT;

  Output:

  -------------

  MID ID INITIALDATE FINALDATE

  213JW7 217LVQ 21 January 2014 January 11, 2014

  213JW7 216TVZ 24 January 2014 23 January 2014

  215ZVD 215ZV9 January 1, 2014 5 January 2014

  215ZVD 213NY1 January 7, 2014 6 January 2014

  234YU 3IUED 26 January 2014 January 27, 2014

• Create a button link URL in AS3 when outside the class is used.

  I need help!

  Quick background - I'm the guy at work who has the most basic understanding, base, base of Flash and was installed.  Makes me the guy ' go to ' now.  I've been avoiding AS3 for a few years now because I'm not a software engineer and my coding knowledge is quite limited. I have googled around for an hour and get something in AS2.  Not so much with AS3.  We have recently upgraded to Flash CC and had removed all previous versions, so now I have no choice.  I can follow directions but the technical jargon associated with AS3 is a learning curve steep for me when I do something like that, maybe twice a year.

  Now, what I'm trying to accomplish:

  It is simple stupid.  I have a flash web-banner.  The background is a static image of the PNG.  It has a countdown to a date.  I need the whole banner to function as a button so that when you click on it, it takes the user to a Web site.  That's all.  That's all I need.  I was able to do this in AS2 before without much of a fight.

  So I did the countdown using the script from this site:

  http://blog.anselmbradford.com/2009/08/03/creating-a-date-countdown-timer-in-ActionScript-3-Flash /.

  It works by referencing classes by external script.  It took me a bit of tinkering, but I got it together, no problem.
  So I'm going to make a button.  I create a button object.  Invisible, place it on a layer above all the rest.  I apply this code in action:

  MyButton.addEventListener (MouseEvent.CLICK, f);

  function f (e: Event) {}

  navigateToURL (new URLRequest ("http://www.adobe.com"));   Use the url of your choice.

  }

  And then it breaks.  The SWF up errors and will not compile.
  First of all, he says:
  1180: call to a method may be undefined, event.

  So I import flash.events.Event. Then, I get:
  1180: call to a method may be undefined navigateToURL.

  1180: call to a method maybe not defined URLRequest.

  1180: call to a method may be undefined addFrameScript.

  1120: access of undefined property MouseEvent.

  So I add:

  import flash.net.navigateToURL;

  import flash.net.URLRequest;

  import flash.events.MouseEvent;

  Who clears all errors except the 1180: addFrameScript.  What I've read, when there is an external class used, I can't apply action in a frame on the timeline script?
  It is so far above my head.  I tried for hours yesterday to find a way to add the script to the button to the main class, but the closest I had been set on my button never compile errors.  I don't know what I'm doing here and why it is so difficult to do two things at the same time in AS3.  I'm just frustrated with all this now.

  Could someone take pity on me and tell me what I need to do to get this working?  Try to use small words and talk to me like I'm the fool of the village, which is how I feel right now.

  Thank you!

  change this to the following and retest:

  Joshua Fowler wrote:

  I think you're right. Under the parameters of the publication, that's what 'Class' is pointing.

  This is the first main part of the code:

  package com.anselmbradford

  {

  import flash.display.MovieClip;

  import flash.events.TimerEvent;

  import flash.utils.Timer;

  SerializableAttribute public class Main extends MovieClip

  {

  /**

  Create a new object of Countdown, listen to updates and pass the date to countdown to.

  */

  public void Main()

  {

  var cd:CountDown = new CountDown();

  cd.addEventListener (CountDownEvent.UPDATE, _updateDisplay);

  CD.init (new Date (2015,3,9,20,00));

  }

  /**

  * Update the display.

  */

  private void _updateDisplay (evt:CountDownEvent): void

  Does this sound correct?

  Thanks again!

• Timer for youtube player?

  Hi, I was wondering if it was possible to display the elapsed time and total time of a video in flash on youtube? I have a reader built chromeless currently on the scene, and it's the only thing missing, thanks!

  Here is a plan of work for her:

  import flash.display.Sprite;
  import flash.events.MouseEvent;
  import flash.events.TimerEvent;
  import flash.geom.Rectangle;
  import flash.system.Security;
  import flash.text.TextField;
  import flash.text.TextFieldAutoSize;
  import flash.text.TextFormat;
  import flash.utils.Timer;
  
  var loader:Loader;
  var seekBarWidth:Number = 500;
  var timeRE:RegExp = /\d+\d+:\d+\d+\s/;
  var seekBar:Sprite;
  var seekHead:Sprite;
  var progressTimer:Timer;
  var countdown:TextField;
  // This will hold the API player instance once it is initialized.
  var player:Object;
  
  init();
  
  function init():void
  {
            Security.allowInsecureDomain("*");
            Security.allowDomain("*");
            initButtons();
            drawSeekBar();
            drawCountdown();
            initTimer();
            loadVideo();
  }
  
  function loadVideo():void
  {
            loader = new Loader();
            loader.contentLoaderInfo.addEventListener(Event.INIT, onLoaderInit);
            loader.load(new URLRequest("http://www.youtube.com/apiplayer?version=3"));
  }
  
  function drawCountdown():void
  {
            countdown = new TextField();
            countdown.defaultTextFormat = new TextFormat("Arial", 10);
            countdown.autoSize = TextFieldAutoSize.LEFT;
            countdown.multiline = countdown.wordWrap = false;
            countdown.text = "00:00 / 00:00";
  }
  
  function initButtons():void
  {
            unMuteBtn.addEventListener(MouseEvent.CLICK, unMuteVideo);
            muteBtn.addEventListener(MouseEvent.CLICK, muteVideo);
            pauseBtn.addEventListener(MouseEvent.CLICK, pauseVideo);
            playBtn.addEventListener(MouseEvent.CLICK, playVideo);
  }
  
  function drawSeekBar():void
  {
            seekBar = new Sprite();
            seekBar.graphics.lineStyle(2);
            seekBar.graphics.moveTo(0, 0);
            seekBar.graphics.lineTo(seekBarWidth, 0);
            drawSeekHead();
  }
  
  function drawSeekHead():void
  {
            seekHead = new Sprite();
            seekHead.graphics.beginFill(0xff0000);
            seekHead.graphics.drawCircle(0, 0, 7);
            seekBar.addChild(seekHead);
            seekHead.mouseEnabled = true;
            seekHead.buttonMode = true;
            seekHead.useHandCursor = true;
            seekHead.addEventListener(MouseEvent.MOUSE_DOWN, startSeek);
  }
  
  function startSeek(e:MouseEvent):void
  {
            stage.addEventListener(MouseEvent.MOUSE_UP, stopSeek);
            stage.addEventListener(MouseEvent.MOUSE_MOVE, onMouseMove);
            seekHead.startDrag(true, new Rectangle(0, 0, seekBarWidth, 0));
            progressTimer.stop();
  }
  
  function onMouseMove(e:MouseEvent):void
  {
            player.seekTo(player.getDuration() * seekHead.x / seekBarWidth);
            e.updateAfterEvent();
  }
  
  function stopSeek(e:MouseEvent):void
  {
            stage.removeEventListener(MouseEvent.MOUSE_UP, stopSeek);
            stage.removeEventListener(MouseEvent.MOUSE_MOVE, onMouseMove);
            seekHead.stopDrag();
            progressTimer.start();
  }
  
  function initTimer():void
  {
            progressTimer = new Timer(50);
            progressTimer.addEventListener(TimerEvent.TIMER, updateSeekBar);
  }
  
  function updateSeekBar(e:TimerEvent):void
  {
            countdown.text = new Date(player.getCurrentTime() * 1000).toUTCString().match(timeRE)[0] + "/ " + new Date(player.getDuration() * 1000).toUTCString().match(timeRE)[0];
            seekHead.x = seekBarWidth * player.getCurrentTime() / player.getDuration();
            e.updateAfterEvent();
  }
  
  function onLoaderInit(e:Event):void
  {
            addChild(loader);
            loader.content.addEventListener("onReady", onPlayerReady);
            loader.content.addEventListener("onError", onPlayerError);
            loader.content.addEventListener("onStateChange", onPlayerStateChange);
            loader.content.addEventListener("onPlaybackQualityChange", onVideoPlaybackQualityChange);
  }
  
  function onPlayerReady(e:Event):void
  {
            // Event.data contains the event parameter, which is the Player API ID
            // Once this event has been dispatched by the player, we can use
            // cueVideoById, loadVideoById, cueVideoByUrl and loadVideoByUrl
            // to load a particular YouTube video.
            player = loader.content;
            player.cueVideoById("FDbP71p4W4g");
            player.setSize(640, 360);
            player.x = 20;
            player.y = 30;
  
            seekBar.x = player.x;
            seekBar.y = player.y + player.height + 10;
  
            countdown.x = seekBar.x + seekBar.width + 10;
            countdown.y = seekBar.y - seekBar.height * .5;
  
            addChild(seekBar);
            addChild(countdown);
  }
  
  function onPlayerError(e:Event):void
  {
            // Event.data contains the event parameter, which is the error code
            trace("player error:", Object(e).data);
  }
  
  function onPlayerStateChange(e:Event):void
  {
            // Event.data contains the event parameter, which is the new player state
            switch (Object(e).data)
            {
                      case 1:
                                progressTimer.start();
                                break;
  
                      case 2:
                      case 0:
                                progressTimer.stop();
                                break;
            }
  }
  
  function onVideoPlaybackQualityChange(e:Event):void
  {
            // Event.data contains the event parameter, which is the new video quality
            trace("video quality:", Object(e).data);
  }
  
  function createFeaturedButtons(player:Object, featuredVideos:Array):Array
  {
            var results:Array = [];
            for each (var id:String in featuredVideos)
                      results.push(player.getClickToPlayButton(id));
            return results;
  }
  
  function playVideo(e:MouseEvent):void
  {
            if (player)
                      player.playVideo();
  }
  
  function pauseVideo(e:MouseEvent):void
  {
            if (player)
                      player.pauseVideo();
  }
  
  function muteVideo(e:MouseEvent):void
  {
            if (player)
                      player.mute();
  }
  
  function unMuteVideo(e:MouseEvent):void
  {
            if (player)
                      player.unMute();
  }
  

• AS count down at the time?

  I need to create a countdown to a date and time. I created a timer with the following online tutorial code. Problem is that I can't find a way to reverse at a time like 08:00 on that date. Here's the code I'm working with. can someone help me?

  this.onEnterFrame = function() {}
  
  var today: Date = new Date();
  Those of var = today.getFullYear ();
  currentTime var = today.getTime ();
  
  var targetDate:Date = new Date (currentYear, 05, 13);
  var Date_cible = targetDate.getTime ();
  
  var Date_cible = timeLeft - currentTime;
  
  var s = Math.floor (timeLeft/1000);
  var min = Math.floor (sec/60);
  var h = Math.floor (minutes/60);
  var days = Math.floor (hrs/24);
  sec = String (s % 60);
  If (sec.length < 2) {}
  s = '0' + seconds;
  }
  min = string (min % 60);
  If (min.length < 2) {}
  min = "0" + min;
  }
  h = string (h % 60);
  If (hrs.length < 2) {}
  h = "0" + hrs;
  }
  days = string (days);
  
  var counter: String = days + ":" + h + ":" + min + ":" + seconds;
  time_txt. Text = counter;

  }

  The constructor for an instance of Date is...

  (YearOrTimevalue, month, date, hour, minute, second and millisecond)

  If you want to have it countdown from 08:00 so you can add the designation of the time and more...

  var targetDate:Date = new Date (those, 5, 13, 8);

• Validation: date deadline should be superior then sysdate.

  Dear all,

  I use Apex 4.2 worm.

  I apply validation on P12_TARGET_RESOLUTION_DATE who target date should be higher resolution then sysdate.

  So I used code below

  TO_CHAR (to_date (: P12_TARGET_RESOLUTION_DATE, 'DD-MON-YYYY HH:MIPM'), "HH:MIPM MON-DD-YYYY") > = TO_char (SYSDATE,' HH:MIPM MON-DD-YYYY "")

  TARGET_RESOLUTION_DATE column's TIMESTAMP in the table.

  
  

  That validation does not validate correctly.

  How can I validate the date deadline for resolution.

  
  

  Thank you
  

  Hi Maxence,

  CORINE wrote:

  I use Apex 4.2 worm.

  I apply validation on P12_TARGET_RESOLUTION_DATE that target date should be higher resolution then sysdate.

  So I used code below

  TO_CHAR (to_date (: P12_TARGET_RESOLUTION_DATE, 'DD-MON-YYYY HH:MIPM'), "HH:MIPM MON-DD-YYYY") > = TO_char (SYSDATE,' HH:MIPM MON-DD-YYYY "")

  TARGET_RESOLUTION_DATE column's TIMESTAMP in the table.

  That validation does not validate correctly.

  How can I validate the date deadline for resolution.

  You are not comparing date date instead you're conversion date to string and comparing.

  Your validation expression must be:

  to_date(:P12_TARGET_RESOLUTION_DATE,'DD-MON-YYYY HH:MI PM') > SYSDATE
  

  I tried the same validation (type SQL Expression and expression as stated above) on apex.oracle.com. Examples:

  https://Apex.Oracle.com/pls/Apex/f?p=52380:15

  I hope this helps!

  Kind regards

  Kiran

• Implementation of date deadline for the approval workflow step

  Hello! I'm trying to set up the deadline for a date of approval workflow. I was thinking of using tokens, so that the user/author enters at this date (using the calendar tool) the custom metadata field, and then this value token can be used in the custom script iDoc in the case of update of the step.
  
  Even if I found something similar in the documentation, I can't understand how to extract the date out of this custom field value:
  
  < parseDate (wfCurrentGet ("lastEntryTs")) $if < $ dateCurrent (-7) >
  DO SOMETHING
  < $endif$ >
  
  I guess that dateCurrent-(7) will have to use my value of token instead of the value (-7)? But how can I configure the token for the date (I know how to user) and how to get here?
  
  Thank you very much!

  It would not be a token, but just a reference to the field that contains the date value. Assuming that your custom date domain name is "xCustomDate", something like this should work:

  <$if parsedate="" (wfcurrentget="" ("lastentryts"))="">< parsedate(#active.xcustomdate)$="">
  DO SOMETHING
  <$endif$>

• The countdown reset date

  I have been using the code for a countdown, which ends April 5, 2012, below. However when the timer reaches this date I will like that it starts automatically countdown to April 5, 2013. Currently, he spends in less numbers. Thanks in advance for any help.

  this.onEnterFrame = function() {}

  var today: Date = new Date();

  Those of var = today.getFullYear ();

  currentTime var = today.getTime ();

  var targetDate:Date = new Date (currentYear, 3, 5);

  var Date_cible = targetDate.getTime ();

  var Date_cible = timeLeft - currentTime;

  var s = Math.floor (timeLeft/1000);

  var min = Math.floor (sec/60);

  var h = Math.floor (minutes/60);

  var days = Math.floor (hrs/24);

  sec = String (s % 60);

  If (sec.length < 2) {}

  s = '0' + seconds;

  }

  min = String (min % 60);

  If (min.length < 2) {}

  min = "0" + min;

  }

  h = String (24 hrs %);

  If (hrs.length < 2) {}

  h = "0" + hrs;

  }

  days = String (days);

  var counter: String = days + "" + hrs + "" + min + "" + seconds;

  time_txt. Text = counter;

  }

  Those has not been defined in my last post.  It is a countdown more effective that does not require the repeated creation of new dates:

  var today: Date = new Date();

  Those of var = today.getFullYear ();

  currentTime var = today.getTime ();

  var targetDate:Date = new Date (those, 3, 5);

  var Date_cible = targetDate.getTime ();

  var startTime:Number = getTimer();

  this.onEnterFrame = function() {}

  timeLeft = Date_cible-currentTime-getTimer () + startTime;

  If (timeLeft<0)>

  Date_cible = new Date (those + 1, 3, 5);

  Date_cible = targetDate.getTime ();

  timeLeft = Date_cible-currentTime;

  startTime = getTimer();

  }

  timeLeft / 1000 =;

  var days: Number = Math.floor (timeLeft /(60*60*24));

  var hrs:Number = Math.floor ((timeLeft-days*24*60*60) /(60*60));

  var min:Number = Math.floor ((timeLeft-days*60*60*24-hrs*60*60)/60);

  var s = Math.floor(timeLeft-days*60*60*24-hrs*60*60-min*60);

  time_txt. "Text = formatF (days) + ' ' + formatF (hrs) + ' ' + formatF (min) + ' '+ formatF (sec);

  };

  function formatF(n:Number):String {}

  var s:String = n.toString ();

  While (s.length<2)>

  s = « 0 » + s ;

  }

  return s;

  }

• The number of column date deadline - please explain

  I have a requirement where I have to save YYMMDD (source varchar) in MMDDYY (target date). How can I do that. Is it possible to save MMDDYY to the date data type.

  Hello

  958218 wrote:
  I have a requirement where I have to save YYMMDD (source varchar) in MMDDYY (target date). How can I do that. Is it possible to save MMDDYY to the date data type.

  No.; YYMMDD MMDDYY format apply only to broadcasters; all DATE columns are in the same internal format.
  If you have a string (in one of the predefined formats), you can use TO_DATE to convert it to a DATE. So if you found the information of date in YYMMDD format, you can do something like:

  INSERT INTO  table_x (entry_date)
  VALUES (TO_DATE, 'YYMMDD'));
  

  If you want to display a DATE in a particular format, use TO_CHAR. For example

  SELECT  TO_CHAR (entry_date, 'MMDDYYYY')  AS entry_date
  FROM    table_x;
  

  Avoid numbers 2 years where possible. They cause a lot of errors.

  Published by: Frank Kulash, 19 March 2013 14:56
  TO_CHAR TO_DATE examples added

• I need to print the browser history to confirm a date deadline, the answer has been published a day more late cost $

  I did a select all and copy, but it would not paste to word. may be able to paste it elsewhere, but I need proof that I consulted a Web site, and cancelled last Monday, then their response has been on my, lost a substantive right. I'd like something that is not easily altered, as a paste to word or notepad might be.

  Maybe use a screenshot of the window history Manager (library) which shows this tour.

  • History > show all history

  See also:

  • Export of history: https://addons.mozilla.org/firefox/addon/history-export/
  • [835204/questions/835204]

• My computer date deadline and I get a blue screen message

  My computer is less than 60 days old, and now for a week, he stops (crashes) at least once a day. When I reboot, I get a blue screen message. I have vista with all kinds of measures to protect against viruses and worms. Automatically, it downloads and installs the updates daily and other than that I have not downloaded or installed anything from the internet.
  Microsoft Geeeeeee, I am not a Curmudgeon and don't know how to fix my machine. I just need (and wait) a reliable system that works! What is the problem and how to fix it? Thank you.

  Thank you very much for your answer, but I have read far more after my post and understood how to correct the problem. Microsoft has created two UPDATES of BAD August 27. in safe mode and I went to my control panel, see updates, uninstalled the 2 bad edits. I don't remember the exact numbers, but one was 36xx and the other was 29erxx.  Now, my computer is fine. If anyone who reads this message is having the same problem, go to the blue screen and updates of messages to read on how to solve the problem.

  How is BTW, that microsoft has put 2 updates of bad anyway? You should be ashamed for causing problems for your customers!

• With A Sync please help (I'm on a date deadline)

  OK, so here's the deal. Shoot us with two cameras at the same time, both cameras synchronized with a free run time code. Both cameras do not always start and stop recording at the same time, so multiple sequences recorded throughout the day should be synchronized during the editing process. The final video is a sequence multiclip with two camera angles, at the same time (scaled and repositioned) on-screen display and synchronized between them. I am able to bring the first clip of camera A and the first clip of camera B and synchronize both at a time even if we can get anywhere from 40-100 camera clips every day. Final cut pro (not X) had a feature that automatically synchronized clips of two cameras and placed in a sequence with the timecode for clips corresponding to the sequence of timecode.

  Is this possible with premiere pro, and if so, how does one?

  I've often warned users away PluralEyes from red giant, mainly because of many problems reported here of people who use it.  But recently, I found myself in a situation that really need this software.  So, I tried.

  Version 4.0 has worked brilliantly, inside PP.  Took me four hours to synchronize half a recital of dance by hand.  PE did the whole 10-minute sequence.

  Give the trial a go.

• Desperate to delay function - date deadline approaching...

  I'm doing what I suspect is easy, and I searched but not come up with what I do.
  
  In my project, I have 4 buttons nav in a navigation bar. Press on, he calls a .swf file that animates the picture real button pressed more large on the main area of the screen, so therefore it is more part of the main navigation bar. I would like the user to click on another button nav (still in the navigation bar) and the animation is reversed - the big picture goes back to a small icon in the navigation bar, and then the button clicked recently expanded in the main area. Make sense?
  
  What I've done until now is to add the code below:
  
  It works fine to call the correct swf by clicking a button. Unfortunately, I do not know how to leave time for the inversion of the animation before jumping to the newly selected area.
  
  From now on, each called swf anime the button image enlarge an on-screen slide of submenus out of it, then it hits a 'stop' in the timeline panel. What I want to do is when a different nav bar button is clicked, it releases the head of reading of the judgment in the loaded swf file, it plays through images reversed, making the big picture shrink in its place in the navigation bar, and the subsequent new button expands to fill the region. Maybe not the best way to achieve what I want, but all I came up with this day.
  
  So, is there a way to tell Flash to release the read head (in the .swf file is called), playing 105 executives and THEN access the appropriate section based on what the user has clicked in the navigation bar?
  
  Please be gentle with me. I'm quite new to THAT, please TALK SLOWLY :) I have experimented with getTimer and setInterval, but those who are above my head. I don't understand how to use them and how to integrate it with my existing code as shown above. I think what I want is pretty easy, but I'm getting very frustrated, implemented.
  
  Any help is greatly appreciated. My hair is gray turning pretty fast on his own - I don't need Flash help with that!
  
  Hope it makes sense. I would like to know if it doesn't and I'll try to explain better.

  Thanks for the help Rob!

• Problems with a countdown

  So, I'm looking at this issue and that's how I started this thread:

  Countdown animated onboard

  I use the example provided by the user files: dharmk

  So here's my project file: Dropbox - simplecountdown.zip

  I started with this example, but I wanted to countdown to the countdown for a specific day, so I went from the proposed variable is therefore:

  var so = new Date (Date.UTC (2015, 0, 11, 12, 6, 7));

  However what makes the report rude: Imgur: the most impressive images on Internet

  What I'm doing wrong here?

  You must use this format for your date deadline.

  Date.UTC (year, month [, date [, hour [, minute [, second [, millisecond]]]]])

  var so = new Date (Date.UTC (2015, 12, 25, 10, 50, 0));