How do you know if there are more positive or negative numbers?
I'll try to explain my problem with an example, because I do not have labVIEW installed in the computer.
I have 10 numbers and multiply to 10 other numbers
and of course I get 10 results, after I have to show the value of meddium of this 10 results and must show the signal that most seem (+ or-)
My problem is to show the signal, if I have 7 positive 3 numbers and negative numbers, how to measure and display the negative signal to the final?
example:
-0,3-0,8 1 0.3 0.6-0.7 - 0.1-0.5 0.3-0.4
If I have to put in the final:
-0.5
Thank you
You can do something similar (Simplified) altenbach proposed:
If the output is true your table has more positive values.
Tags: NI Software
Similar Questions
-
I try to install Service pack 3 on my windows XP system when I try to download I have the C:\windows\ssystem32\ntdll.dll message is opened or currently in use by another application you approach other applications & try again, I'm connected only to Microsoft, how know if there are other applications running.
I hope it's because you just made a new installation of Windows XP?
Through these two articles:
- Steps to take before you install Windows XP Service Pack 3
- Windows XP SP3 - read all the prerequisites for a successful installation
What I propose is the following...
- Go to this web page: How to reset the Windows Update components? and use the FixIt utility in aggressive mode.
- Reset.
- Download here all the SP3 Setup file: Windows XP Service Pack 3 Package of Network Installation for developers and information technology professionals and save it to the Office of the administrator of the user account on the computer in question.
- Reset.
- Double-click the installation file downloaded in step 3 and follow the instructions.
-
How do you know if there is any fragmentation
How do you know if there are any fragmentation of the cube of OSB?Go to the properties of database-> statistics tab
If the average ratio of clustering is 1 - there is no fragmentation. (virtually impossible)
If the average ratio of clustering is greater than 0.6 - then it's ok
If the average of clustering ratio is less than 0.5 - then there is considerable fragmentation in the cube and you must defragment the cube. -
How can we know if there are two or one router processor (RP) in ASR1006?
How can we know if there are two or one router processor (RP) in ASR1006? Is the RP located in ASR1K inside or it's like a map? Thank you
'show the inventory' or 'display the platform '.
The RP is "embedded" / "shipped" in ASR1001/1002 and 1004, 6, 9, 13 card.
-
How do you know which sites are open through my WiFi.
Hello
I want to know if there is a way by which I can find-out sites of my network connection. I also have a WiFi modem.Help, pleaseTraffic logging is a fairly common feature of commercial routers but generates a large amount of data that can not hold a little home router. Some will allow you to define a syslog server where the data are sent to another device to be stored and evaluated however this will be in addition to the destination IP addresses which does not easily translate to the names of the sites on the fly.
-
How do you know what screw are running?
When I stop my Main.vi all the subVIs should be stopped. But when I go to close my project, it says some screws are still running? How I know which screws are running? Where can I get a list of these?
-
My all-in-one printer scanner Canon MX 860 lost the ability to print from the computer, now that I've upgraded to El Capitan. It didn't happen immediately, but now the buttons 'research' went to Canon interface, and the interface of the Apple System. (I spent half a day on troubleshooting, reset and download the drivers from Canon without success.)
I want to buy a new all-in-one printer... (not Canon, thank you). I need to be sure that there is a 'friendly' pilot El Capitan before I buy and connect my printer. Interfaces for printer drivers are configured to "detect" my printer before the printer list is revealed. I checked Apple's site, but the model numbers are not exactly the same as the units that I compare before you buy.
I am currently in Singapore where items back isn't something they do unless it is non-functional. You have chosen it, it works, you buy it, it's yours. I need to be sure about the drivers before you have the machine.
See this link for compatible printers.
Printer and scanner software available for download for your Mac - Apple Support
Personally, I use Epson, configured as Airprint and have no problem.
-
How do you know if there is a specific "volume label"?
I am running Windows 7, and I have several external connected to my PC HARD drive. Volume name 'BOOTLOADER' a HARD drive.
How can I write a LabVIEW vi, to know if volume label exist, IE if the HARD drive is connected to my PC?
I tried the solution in the link below:
but I couldn't get the batch file to work.
In regards to the .NET solution, I copy and paste the block diagram of my VI, which does not... See my earlier post in this forum. Running the original VI works well...
It is pretty easy to get the list of drives by letter with list dir, but I could not find a clean way to LabVIEW, if you want to check for a specific drive, maybe you can test the size and the size of sector... I know it's just a workaround of shit...
hope this helps
-
Don't know why there are more than 1 choice of update for AReader update?
Dear friends in Adobe Reader for IOS,
I'm quite a beginner and still more than a beginner to ask questions in this type of forum, so I hope that you will stick with me please. I think I should put more in the question, but I didn't. I am sure I will learn from this experience. I hope. I have a... MacBook Air w / 10.7.5 OS trying to update Adobe Reader for IOS ENGLISH and it gives me two different choices and I don't know what to do because I've never seen more than one choice. Do need to be done in order or what, I'm really confused. Two different choices were (AR 11.0.03 or 10.1.4) any help you would be kind enough to share with me (and maybe even others), I would be very grateful for your time and your help.
Have a great day... GOSH, I hope I did this right. Thanks, Tai
No problem, Tai. But you say you're a MacBook Air, so I've moved your question to the regular Adobe Reader forum. (iOS is used to run an iPad or an iPhone).
-
I want to buy an iBook. There are 2 different books with the same name, author, and the book cover. They are different number of pages with different prices. Specifically, all the light that we do not see. " How do you know that we purchase?
I would get one that has 4700 comments already.
-
can someone let me know how to print a scanned document. In printing only the 1st page prints fine as I know that there is more than one document. This is the version Adobe photoshop cc 2014. Someone said it you use printing quick button but who can't find anywhere.
Carolyn
Carolyn,
I don't know if Photoshop is the best solution for the printing of DOCUMENTS scanned. Photoshop opens a page of a DOCUMENT at a time, let's say you have a MultiPage PDF Document, when you open with the PS, tell him what page you want to open. Once you do, it will convert this page into basically a picture, a raster file that can be edited like a photo. So if you go to print, it prints only one page, you have open... So, if you have opened the first page of your document and go to print it, which explains why it only prints the first page.
So is what file type of the document that you are trying to print? If it's a PDF file, I opened it with Acrobat/Reader, depending on whether you have and that FILE you > PRINT it like that. Or is there a particular reason (Lighten/Darken/increase contrast etc...) you are needing to go first to Photoshop?
Give me a little more information on exactly what you're trying to do and I'll do my best to provide a workflow easier to achieve your final goal.
I hope this helps.
-
Original title: completely clueless
I'm totally clueless when it comes to computers, but I try very hard to learn. I am using the help section a LOT, but I can't seem to find an answer to the only thing that makes me crazy. How can you know what drivers and programs are essential and those that can be deleted without harming my computer? I have a very basic net accountant I learn on before I screw up a portable more expensive and I do a cleaning on my C and D drives to improve performance because it runs so slow but it tells me I have the drivers who slow down Windows. I would greatky appreciate any assistance from someone who has the patience of a saint and is willing to take the time to explain it to me, in terms laymans. Thanks in advance
Drivers: you should know what you bought (in your machine) and what * you * want out of it. If you want stability and things work properly - let alone the drivers. If you want more performance check (and other games) in the drivers of motherboard chipset and video network from the manufacturers Web site... For more stability stick with the OEM website (HP, Dell, Lenovo - the assembler of the whole machine) and slightly more performance/push the limits (even if they want to work too - so still some stability) - access to websites of its components manufacturer.
With regard to the programs: you can decide what you use and do not use. If you are not sure, look it up (Google) or ask.
-
I think I know how to uninstall programs; However, how can you say that programs are essential to the functioning of my laptop and who are just garbage programs or programs that I rarely use. Some are obvious (such as games and other), but there is so much and I'm not computer savvy. Help, please. Give me a list for computer idiots or something. Thanx.
I think I know how to uninstall programs; However, how can you say that programs are essential to the operation of my laptop and who are just garbage programs or programs that I rarely use. Some are obvious (such as games and other), but there is so much and I'm not computer savvy. Help, please. Give me a list of idiots to computer or something. Thanx.
Hello
There is no list of what you don't need.
We don't know what programs you have, or what you use.
It is your personal choice.
@@@@@@@@@@@@@@@@@@@@@
See if this helps you improve performance.
Search for malicious software with the FREE version of this program.
And does not accept the option "Pay for the version" trial installation
Download, install, update and scan your system with the free version of Malwarebytes AntiMalware:
http://www.Malwarebytes.org/products/malwarebytes_free
@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
You can clean your hard drive using these two methods.
"Delete files using Disk Cleanup"
Using the free CCleaner program:
http://www.Piriform.com/CCleaner
In NO case use the registry cleaning Option in CCleaner
@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
Make sure you have the latest updated drivers:
Access the site on your computer or equipment manufacturing > Driver and Software Support Section > search your computer or hardware model number > then your operating system > locate the correct drivers > download and install.
@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
"How to optimize the performance of Windows 8 and 8.1" . "
http://www.eightforums.com/tutorials/37511-optimize-performance-Windows-8-a.html
@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
Worth the read as:
"How to optimize Windows 8.1 for a desktop PC.
http://www.howtogeek.com/167013/how-to-optimize-Windows-8.1-for-a-desktop-PC/
@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
" " Performance & maintenance"
@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
And I would check to see if it has damaged system files.
Each method/step below progresses to another if the first does not all corrupted files which are, etc..
«Use the System File Checker tool to repair missing or corrupted system files»
https://support.Microsoft.com/en-us/KB/929833
_________________________________________________
And these eightforums.com tutorials are very detailed for the problems resulting from Scan SFC:
"How to run the command" SFC/scannow"at the start or in Windows 8 and 8.1" . "
http://www.eightforums.com/tutorials/3047-sfc-scannow-command-run-Windows-8-a.html
Read it in conjunction with the rest of the information they give link above.
Note
If SFC could not fix something, then run the new command to see if it can be able to next time. Sometimes, it can take by running the sfc/scannow command 3 times restart the PC after each time completely fix everything what he is capable of.
If this isn't the case, then run Dism/online/Cleanup-Image /RestoreHealth to repair any corruption component store, restart the PC later and try the sfc/scannow command.
If still no, then try using ONE OPTION above to run the command sfc/scannow at the start
If still no, then you could do a Refresh of Windows 8, or run a System Restore using a restore point dated before the wrong file occurred to fix. You may need to repeat doing a restore of the system until you find a restore point that is older that may work.
If not yet, then you can use the steps in the TIP box in the section THREE OPTION to manually replace the files SFC could not fix.
__________________________________________________
"How to update windows 8 and 8.1" . "
http://www.eightforums.com/tutorials/2293-refresh-Windows-8-a.html
Refresh your PC goes like this:
- The PC starts in Windows RE (Recovery Eenvironment).
- Windows RE scans the hard drive for your data, settings, and applications and puts them aside (on the same drive).
- Windows RE installs a new copy of Windows.
- Windows RE restores the data, settings, and applications, which it set aside in the newly installed copy of Windows.
- The PC reboots into the newly installed copy of Windows.
_________________________________________________
"How to reset Windows 8 and Windows 8.1" . "
http://www.eightforums.com/tutorials/2302-reset-Windows-8-a.html
"When you reboot your PC, the drive will be completely reset and all your applications and your files will be removed it." Windows 8 will be reinstalled, and you need to change any settings, and then reinstall all the apps you want to come back after the reset. If you know if all the files you don't want to lose, then you must back up these files before you start resetting.
See you soon.
-
Original title: Windows 7 Media Player
How do I know if I have more than one of the same song in my library, and if I do how do I remove it without deleting both copies?
Hello
Duplicates would be revealed by the observation. If found you are probably followed the same
record twice.Add items to the Windows Media Player library - see the monitoring records - and delete a folder
controlled by the player.
http://Windows.Microsoft.com/en-us/Windows7/add-items-to-the-Windows-Media-Player-libraryRemove items from the Windows Media Player library
http://Windows.Microsoft.com/en-us/Windows7/remove-items-from-the-Windows-Media-Player-libraryAdd or edit media information in Windows Media Player
http://Windows.Microsoft.com/en-us/Windows7/add-or-edit-media-information-in-Windows-Media-PlayerThe Windows Media Player library: frequently asked questions
http://Windows.Microsoft.com/en-us/Windows7/Windows-Media-Player-library-frequently-asked-questionsGetting started with Windows Media Player
http://Windows.Microsoft.com/en-us/Windows7/getting-started-with-Windows-Media-Player#section_4--------------------------------------------------------
The library may be corrupted if necessary, after the media library - advanced - restore tools above...
Reset the library will result in the loss of all of the counties of game and probably both sides.================================================================
If you think there is duplicate in separate folders files:
Here are a few utilities to help, be sure to remove duplicates once and good
folder. If If doubt copy the file to another folder, delete and then check WMP.Here are several free utilities and they have all their benefits and their methods.
Auslogics Duplicate File Finder is the MD5 search engine that allows you to find duplicate
files content, without worrying other matching criteria. It would be useful, for example, when two identical
MP3 tracks or video files
have different names
http://www.Auslogics.com/en/software/duplicate-file-FinderEasy Duplicate Finder - find and delete the duplicate - free
http://www.easyduplicatefinder.com/AntiTwin - Installer and Portable versions - search files in double or similar-
same binary - free
http://www.Joerg-Rosenthal.com/en/antitwin/Fast Duplicate File Finder-Free - quickly find all the files in a folder and its subfolders duplicate
http://www.Mindgems.com/products/fast-duplicate-file-Finder/fast-duplicate-file-Finder-about.htmDuplicate File Finder - Smart Port Forwarding - TCP Port Scanner - TCP Tunnel Port-
Multi-minuterie-free
http://www.brooksyounce.com/Duplicate File Finder software (pictures, mp3, iTunes)
http://www.Moleskinsoft.com/SearchMyFiles - free - an alternative to the "Search for files and folders" module standard
Windows. It allows you to easily search files in your system by wildcard, by last modification/creation/last accessed: time, by file attributes, by the content of a file (text or binary search),
and by the size of the file. SearchMyFiles allows you to make a very specific search that cannot be
done with Windows search.
http://www.NirSoft.NET/utils/search_my_files.htmlI hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" experience :="" bicycle="" -="" mark="" twain="" said="" it="">->
-
How do I know what programs are safe stop execution or remove it from the startup of Windows 7?
original title: start up programs?Hello
You can use these to control which startup programs. Many others settle
start-up haven't really needed to be there. Such as Acrobat Reader (Adobe), WinAmp
Agent and many others who are responsible for pieces of themselves to get started more quickly (not a problem
on the machines of today ' hui) and of course they can control the files they support (to be
course you continue to use only). Those who are only common examples and didn't want to not say
as a slam on these programs very well.How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7
http://support.Microsoft.com/kb/929135How to change, add or remove startup programs in Windows 7
http://www.SevenForums.com/tutorials/1401-startup-programs-change.htmlAutoruns - free - see what programs are configured so that it starts automatically when your
system boots and you log in. Autoruns is also the full list of registry and files
locations where applications can configure start automatic settings.
http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx-------------------------------------------------------------------------
Performance and maintenance tips
http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-performance/welcome-to-the-performance-and-maintenance-Forum/19e5d6c3-BF07-49ac-a2fa-6718c988f125I hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="">-><- mark="" twain="" said="" it="">->
Maybe you are looking for
-
Hi all...Good so I want to connect my HP Pavilion 6814ca [entertainment series] to my HDTV. What kind of product should I use and how do I do it. Help, please.Thank you Ginger
-
Re: A500 power icon shows only % left and duration (estimated) no real
Hi I bought an A500 last week. Very happy with its features etc., however, I have a question where the power icon shows only % left.For some reason, it does not display the weather remains as it is supposed to. I took it back as long as you 'Out of B
-
My version of 32-bit iexplorer opens twice when I click on it and does not respond when I try to browse. The same problem doesn't produce, 64-bit, however I want to run the new flash player that runs on the 32-bit browser. Any idea what is the prob
-
Cannot open some PDF files despite its drive 11.0.10 installed in windows 10
Hi, I installed Windows 10 and Acrobat Reader 11.0.10. I can't open some PDF files. Although it worked well in windows 8.1. But since the update to windows 10, I am unable to launch adobe reader software.I reinstall the drive 11.0.10 but do not solve
-
Mac CC - I closed/reopnened Panel - inexplicable - updated - trashed preferences - my Panel inlays of Folio is always empty.Can you help me?