Course 9: Styles don't appears in the non-Desktop view

Similar Questions

• I need to install InDesign CC 2014, but he does not appear in the versions "previous view".

  I need to install InDesign CC 2014, but he does not appear in the versions "previous view".

  Hi Michele,

  Please try to quit and relaunch the application in creative cloud, the ability to install CC 2014 should be available in Indesign.

  And in the case where it doesn't work please contact support: Learn & Support

  Kind regards

  Akshay

• Where is he, a search feature that appears in the Adobe Content Viewer?

  Where is he, a search feature that appears in the Adobe Content Viewer?

  Transferred to DPS forum.

  DPS does not have this feature without jumping through a bunch of hoops HTML.

• Recovery of files that don't appear on the trash after deletion

  I accidentally deleted my documents folder. I found the file to duplicate under the same user, so I deleted one. Now that I open the documents folder, I see that all my files went on the other also. I checked on the trash can, but there is no where. I use windows vista Home premium.  I would like to know if there is another way to recover lost data. Frequently occur when you delete files that they do not appear in the Recycle Bin?

  Hello Fjose,

  Thanks for posting your question on the Microsoft answers Forum.

  You can check the settings of the trash to see if you have an option is selected.
  On the desktop, right-click on the Recycle Bin, and then click Properties.
  Click the general tab,
  Check to see if "do not move files to the Recycle Bin" is selected. If it is enabled, then your files
  will be permanently deleted when deleting.

  Otherwise, you can try to see if a system restore will retrieve your documents folder.
  Follow the article below for the steps to restore the system.
  936212 KB - how to repair the operating system and how to restore the configuration of the operating system to an earlier point in time in Windows Vista
  http://support.Microsoft.com/kb/936212

  You can also create a manual system restore point so that you can restore to that State in case of problems.
  Right-click on the computer icon in the desktop, then choose Properties
  In the left pane, click System Protection
  Alternatively, to directly access the System Protection tab, click Start and type SystemPropertiesProtection.exe.
  If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  Click the System Protection tab and then click on create.
  In the System Protection dialog box, type a description, and then click on create.

  Answer please come back and let us know the status of your question.

  Sincerely,

  Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• All new updates, I don't and then access my sites when I try to upload my site on my storage in my Adobe account. They just don't appear when the window opens for the files I want to download. Any ideas what I need to do?

  I went to upload my site on my creative cloud storage and none of my recent cases appear in the folder when it is opened. They are there when I check from inside the Muse, however, when I open the for download only older versions appear and I can't raise the new, for the life of me!

  

  I took these screenshots, so you could see it's the same exact file. In one, all my sites are just the old stuff in the other. I would like to upload my site to my cloud storage, just in case I have one, I hate to say it out loud, computer crash. Any help will be appreciated.

  Sue

  Hi Susan,.

  Can you please check if the creative cloud synchronization is on?

  If this is the case, it must create a folder on your computer with the name of "Creative cloud files.

  You can then copy and beyond your Muse files in this folder and they will be automatically synced to your cloud storage.

  Kind regards

  Akshay

• When I open a new illustrator document color swatches cs6 don't appear in the swatch Panel. 10.9.3 MAC user

  my color chart do not appear in the swatch Panel when I open a new document cs6. 10.9.3 MAC user

  Color chart is included in the new profiles of documents appearing in the menu 'profile '. Were you by selecting a profile from there deliberately? What happens if you do now - select 'Print' or 'Web '?

  If the documents do not always contain the nuances and you are certain that you do not change the document profiles, then they could have been damaged.

• Topics don't appears in the index

  I use RH10, HTML version to generate PDFS.  I have patients who use a white font on a dark background:

  

  When I generate the Index, the topics using the white font not displayed.  However, the subjects who use black font appear:

  

  The index entries are structured using the section properties:

  

  How can I get the subjects using white font appears in the Index?

  In fact just by selecting the index would confirm the theory. The text would show against the selection color.

  See www.grainge.org for creating tips and RoboHelp

  

  @petergrainge

• When the course Advanced Admin makes its appearance on the VIEW

  My question is double, first what is the Advanced admin appearing on the VIEW review and secondly when the design review will be available in the United Kingdom

  Tom Howarth

  VMware communities user moderator

  Tom,

  I received an email from VMware last night stating that the review of the business administrator is now available at various Pearson Professional Centers.  Unfortunately, the closest for me is always a trip plan.

  Whatever it is, I owe you a pint.

  ________________________________

  Jason D. Langdon

• Dates on Firefox don't appear in the American Style, that is, month day year I want to change to day month year please help?

  Could you please tell me how to change the display of the date to display the day month year instead of month day year?

  HOW to: Change the Date, time, number, and currency value displays in Windows XP

  http://support.Microsoft.com/?kbid=307938

  Check and tell if its working.

• ThinkServer RD650 & 720ix RAID - how to get all the readers don't appear in the TOC?

  Hello

  Just got a RD650 with a 720ix controller. The chassis I have is where it provides a hybrid of disk form factors. Thus, at the front left of the server it first has 6 x 2.5 "bays and then 3 x 3.5" bays, which is the first half of the bottom of basket. Then the rest of the side front of the server and the other half of the background is populated by 6 x 3.5 "bays.

  I have 6 hard drives in total: 2 x 300GB 2.5 "SAS 15 k and 4 x 3 TB 3.5" 7.2 k SAS. However, when I go in storage management in the TLT, the number of disks is only 5 and I don't get the option to include all 4 of my disks 3.5 "in a virtual drive, I get only the possibility to include 3. If the last drive 3.5 "which is located on the right side of the server and backplane is not displayed as being available.

  Now, I know that this controller supports up to 32 disks, so what do I do to get this appears as a disk?

  I'll post a picture here as well, the contours in green are my readers that ARE available, the red box is my a drive 3.5 "which is NOT displayed as being available (all the lights are on and drive seems to operate normally, if I swap this drive for another that I always get just the same 3, 3.5 available instead of all 4 readers).

  

  I would REALLY appreciate some help with this, I need this appearance of player for RAID10 or this server back!

  Thank you

  LD.

  Yes sorry I meant far earlier, it was a dead drive, I thought since I had checked in the other bays correctly but obviously not.

  This server has only 2 usb ports! Crazy, so if you're flshing a firmware or load a driverbundle or something else in the TOC but USB, you will need to remove the keyboard or the mouse, what genius decided cela? All servers must be at least 3 USB ports, whether or not you are going to run headless finally.

  In addition, ALL 3.5 "4 drive caddies are cracked and broken where the screw fits on the front plastic part metal! This must have been done in the factory AND the hanging screws which holds the raid card down is broken!

  In any case, the initial problem is resolved.

• Lower the third Quicktime file of EI don't appear in the first sequence

  Hello!

  So I created one third lower in After Effects that I exported from the queue to render in RGB + Alpha quicktime format. I can import it into my first CC project with no problems at all. He plays in the monitor source without problem, but once I place it in the timeline, it does not even appear when I play the sequence. It's upstairs, so he is not buried under another track. I have always created the lower thirds like this and have not had a problem so I am at a loss. I don't know if this is a problem in the way that I export in AE or if it's a question that I don't know.

  Any suggestions?

  It turns out that I created my AE project at a different rate than my creation project

• Lists numbered in the heading styles do not appear in the table of contents

  Hello world

  I used lists numbered as part of the style definition for the 4 levels of headings, for example.

  Chapter 1: INTRODUCTION

  1.1

  1.2

  1.3

  1.4

  1.4.1

  1.4.2

  one.

  b.

  c.

  d.

  When I create the table of contents, however, the numbering does not appear.

  Anyone know why this happens and if there is a workaround?

  Appreciate any advice.

  1. Go to set the styles in the menu layout, table of contents
  2. In the diolog: more Options
  3. In the paragraphs numbered section: select "Include full paragraph.
  4. Save the Style and use.

• graphics chips don't appear when the site is powered

  Hello to all of you who know much more than me and thank you in advance for your help.

  I use DW CS (old version) to build a site with a lot of bulleted lists. I created a list style (see below) that uses a graph rather than a circle, square, etc. When I discovered the site locally, the ball / this image, but when I upload the site on the web, does not show the ball.

  Anyone?

  . List {}
  list-style-position: outside;
  list-style-image: url(assets/gr-bul.gif);
  list-style-type: none;
  do-family: Arial, Helvetica, without serif.
  do-size: 11px;
  Color: #333333;
  visibility: visible;

  }

  A URL, this question appears is: http://client.k2vis.com/rc/ under the title "A Unique anti-aging"... ». Below, I have inserted the chart rather used the style of the list.

  Thank you!

  Amy

  The original CSS rule is fine. The path to the chip does not work.

  The prefix it with "/ rc" (him even as you did for the list under "Nutrition for your skin". This list needs restructuring in one

  • list)

    . List {}

    list-style-position: outside;

    list-style-image: url (/rc/assets/gr - bul.gif);

    list-style-type: none;
    do-family: Arial, Helvetica, without serif.
    do-size: 11px;
    Color: #333333;
    visibility: visible;
    }

    Works here.

• Code snippets don't appears in the html Robohelp 10 files

  Hello

  I'm trying to insert an excerpt (I tried adding new and using existing ones) in a subject.

  The code snippet displays in the Editor pane and also in the output pdf control and in the subject preview pane.

  However when I opened the HTML directly from windows Explorer, the code snippet does not appear. One of my outings use these html files and I'm eager to make the most of the functionality of the code snippet.

  Any tips?

  Thank you

  Caroline

  Hello

  When you insert a snippet, which you're really insert is a code in the HTML code that looks like this:

  

  This code will have to be dealt with during the build process to insert the actual information extracted.

  RoboHelp is not similar to other editors HTML in that you simply edit can be used immediately. Working with RoboHelp projects is similar to the use of ingredients to prepare a dish. You will need to cook the dough biscuits to have cookies!

  See you soon... Rick

• FM 10 Index markers don't appear in the text

  Using FM 10, I'm having a problem, I had several years ago, but don't remember what I did with it.  I have a little book, basically finished except for indexing.  But when I type, the impression is green, not black.  If I delete it, she blushed and cannot be deleted.

  Is this a problem with the text file, or with the software itself?  I pushed a wrong button somewhere?

  Earle

  Yes, it seems to be the track text edits.

  FM 10 help, Chapter 10, "editing text":

  Do one of the following:

  • In the book window, select view > track text edit > activate. This option allows to switch on and outside.
  • In the Document window, select special > track text edit > enable. This option allows to switch on and outside.

  Note: It is recommended that you have documents open when you activate the track text changes. FrameMaker will not track text changes if the document contains errors that prevent the opening of FrameMaker.