Equium A60 do not start

Similar Questions

• Equium A60 does not start after the BIOS update

  I have an Equium A60. After being caught with some very nasty malware and Trojan horse, I had the disiccion to reformat the machine and reinstall the OS.

  Everything goes well until I updated the bios. Machine crashed and now I can't restart. Press the power button and the machine will start for 3-4 seconds and then stops.

  I know it of because of the bios and want to know if there is anything that I can reset this back to the original settings?

  Thanks in advance for your help

  Hello

  Unfortunately, you can not solve a BIOS is broken down by yourself. At the machine really / judgment of accident during the update process? If Yes, then your machine has disappeared and the only chance to bring back to life is to ask an authorized service partner to help you.
  Maybe they have a software to solve these problems. You should try and contact the nearest ASP in your country:

  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/generic_content.jsp?service=EU&ID=ASP_SUPPORT

  Good luck

• Equium A60 will not start

  Hi, I am despartely needing help with my A60 equium that won't start. When you turn the button lights up, fan and starting, but then in a few seconds the cutting power. I tried different sources of energy, also just by using ac power and battery just all produce the same results. I had installed a memory chip a few months back and thought it might be that, but when I took it off the laptop has always been the problem.

  Is there that anyone may be able to help me with this problem? Thank you

  TAF

  Hi Michael,

  The first thing that happens when your, press on the power button on your laptop, it's that the CMOS chip (which contains your BIOS) through a pre-deignated POST (Power On Self Test) process that verifies the functions of the material of base components after what the BIOS will be charged which will lead in turn to the operating system itself being started.

  If a failure or a problem occurs during POST and then power on the sequence stops (usually after a series of beeps are emitted that are coded to help the diagnostic process. The actual beep codes are specific to the manufacturer of the CMOS/BIOS chip.

  If you receive no all audible sounds, then it is likely that the problem is very early in the POST process and may indicate a problem with your main card or your electronic internal.

  You can try to remove and and reinstall devices such as RAM memory modules, hard drive, optical drive, etc to see if this corrects the situation, but if not then you will need to take the device to authorized, Service partner who has the diagnostic equipment needed to perform accurate control.

  Kind regards

• Equium A60 does not start correctly

  Hey,.
  I was working on my laptop and it froze, so I restarted, but it froze again.
  When it restarts again the laptop attempted a System Check, but to try to initialize steps 3 > (newspaper?) it happened extremely slow so I restarted it.

  This time, the laptop not boot but produces a blank screen showing:
  "For (x) Realtek RTL8139 810 x PCI Fast Ethernet Controller v 2.13 /8130/ (020326) PXE - E61 Media Test fails, check the cables." PXE-MOF-leave PXE ROM.

  However, when I am sometimes inclined to my laptop, it starts, but slowly?
  I test the University, but I don't understand what to do; I took it to our technicians, and they don't know what to do. Can anyone help please?

  Hello Joseph

  I assume that the HARD drive is at the end of his life. Like written Marina trying to check if you have access to the HARD drive otherwise, I think you need to buy new HARD drive.

  Please let us know if you will find what is the problem.

• Equium A60 will not start - get a beep code

  Hello

  This laptop has problems with ATI (even those included on the recovery disk) display drivers. He created a blue screen on a dll file.

  After reading around, I found that it was recommended to upgrade the bios, after going to the appropriate section of the Web site, I downloaded the flash tool from windows for the laptop bios.

  I ran and it opened, returned to the laptop and the screen is blank, a blue ring around the power button is on, but no display.

  I left it for a period of time see if it would to restart or something, but nothing has happened, it would not be the button turn off so I unplugged the power and removed the battery.

  To again turn on the laptop, it only stays on for about 3 seconds then turns off again.
  I get the beep code: short break, Long, short break, beep, beep beep, then it turns off.
  The caps lock and numlock keys are turned on.
  The DVD drive light blinks.

  But other than that, no display etc.
  Ive tried the battery leaving aside for awhile.

  Anyone have any ideas why flash bios toshiba own this would cause? Also what can I do about it? in any case to recover the bios etc via a recovery mode?

  Thanks in advance.

  PSA67E

  Hello

  Well, unfortunately for me it looks like a hardware failure.
  Maybe the motherboard is broken.
  These problems may occur if you use a bad BIOS or the incorrect BIOS update procedure.

  Please check this document FAQ How to upgrade the BIOS:
  IOS http://eu.Computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/FAQ.jsp?z=234&service=eu&from=faq_selection&CFID=B & FID = TRO0000000b07

  Unfortunately if there is something wrong with the hardware you should ask Toshiba service for assistance.

• Satellite Pro A60 - does not start

  My A60 will not start. The power supply is plugged with a green light on the power supply and the A60. The battery is full (light began in orange and is now green). Nothing happens when you press the power button.

  Tried to take the battery out and running on AC, but no change.

  Any ideas?

  Thank you
  L

  HI Laurent,.

  Try to remove the battery and also diconnecting the AC power for a few minutes. Then re-install the battery and try to turn on the unit. If this does not work, then remove the battery and plug in the AC power. Again try to power on the device.

  If none of the above works then you will need to refer to a Service partner authorized to have the laptop checked.

  Kind regards

• Equium L10 will not start

  Please help - my Equium L10 will not start.

  Power supply is OK. When the power is connected the orange battery light comes on. I press the power button the green power light turns on momentarily (literally a Flash), then both the Green and orange lights out with orange alone returning it on about 2 seconds later.

  Else does nothing - no fan activity, no hard disk, no activity of the screen activity, no other light - you get the picture!

  I tried the following:
  Removed battery and tried to start with AC power not only - no joy
  Removed AC power and I tried booting with battery only - no joy
  Barrette of RAM removed and reinstall - no joy

  Does anyone have ideas before considering a tech? Suggestions (with the exception where to paste!) would be welcome.

  Kind regards

  Gary C

  Hmm .He doesn't sound good. For me, it looks like a motherboard problem. It is maybe something wrong with electronic power to the Board of Directors of s. But not for sure.

  What you can do is to remove the battery and unplug the power adapter for a while.
  Wait about 20 minutes and connect the battery and adapter for the laptop. Then try turning on the laptop computer.
  If this does not help I recommend contact the ASP technician, because I don t think you will be able to know what's exactly wrong.

  So I hope that the technician can find the fault quickly and can solve this problem.

  Good luck

• Equium A300D will not start.

  My Equium A300D does not start. It just displays 'the file is possibly corrupt. The file header checksum does not match the checksum calculated. Why? What can I do? I have only a few months.

  Have you installed lately new RAM? Its important to the RAM test before use. Or the standard RAM is possibly defective.

  Go to www.memtest.org and run Memtest for a few passes (it is a bootable CD).

  The file system may be damaged, try running CHKDSK from the Recovery Console. http://support.Microsoft.com/kb/314058

  The HARD drive could be faulty, Hitachi DFT is a good HARD drive tester. Run the test advanced to search for bad sectors.

• Drive CD/DVD of Equium A60 does not work correctly

  Hello
  I just bought a used Equium A60. The seller reformatted the laptop using the player. However, the player will not play any disc now (I tried the CD, DVD and Toshiba load discs. The Device Manager shows the drive works, but the program tells me to insert a disk. Using advice gleaned on this forum I tried to clean the lens, System Restore, start with the key C pressed, tried F12, downloaded a driver for DVDram drive and finally remove the disk and submit.
  The seller said he always worked well for him and the laptop arrived in perfect condition. All you other ideas?

  Go to Device Manager and remove the CD/DVD drive.
  Then restart the laptop and wait until the OS has recognized and installed the disc again.
  Reboot the laptop!
  Access to the registry editor and select this key;
  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  Here, you need to remove the UpperFilter and UpperFilter
  Then reboot again.

  I hope it helps

• Equium A60 - beeps at start

  When under tension over an Equium A60, I get a long beep (3-4 seconds) and he then turns off; no error on the screen and no sign of activity.
  I'm assuming that there is a message error and probably serious enough, but no idea what it means.

  What does a single long beep mean?
  Be it on the mains or battery power, or with memory removed makes no difference.

  Thank you

  I guess that there is a hardware problem on your motherboard.
  A long beep is displayed because the laptop can not pass the POST (power on self-test) and, therefore, the machine doesn't start.

  Unfortunately, it's not easy to say what could be wrong with your laptop
  In your case, each unique material part should be checked; RAM, CPU, motherboard, etc.
  But I don't think that you have all the material resources useful and enough technical experience in this regard.

  In my opinion you have only one option, and it is ASP.
  The authorized service provider may check the laptop and can run diagnostics tests

  I wish you good luck

• Equium A60 does not recognize the DVD ROM

  I am trying to use the product recovery dvd - rom on my Equium A60 and found that the reader not recoginse not the disc. I tried DVD movies, audio CD and other disks installion and all work well and the recovery disc is recognized on the other 2 computers I tried it on if the drive is not damaged.

  I've also tried uninstalled the driver and restart the computer, so the driver reinstalled, this allowed the disk to read once, but when I rebooted the computer run really drive it is came with the same messages "not found no bootable disk" he was not able to read again since.

  Can anyone help?

  Hold on! Have you tried to boot from the recovery DVD or have you tried to boot under Windows OS?

  I put t know exactly what could be wrong but sometimes a lens player could malfunction and could not calibrate correctly. In this case some mediums are not readable.

• Equium A60 - Generic not recognized USB Hub

  Equium A60, XP Home Edition SP3.

  My Tevion USB 2.0 combo card reader is reported as being a USB device fails, is not recognized and implemented in the device as an unknown device manager.

  Here's the riddle:
  When I plug it into the same old PC under XP Pro SP3, it is recognized and works.
  When I plug it into a new PC running Vista Home Premium, it is recognized and works

  And finally, and especially:
  When I plug a USB 1 Hub 4 ports on the A60 Equium and then plug the Tevion USB2.0 card reader this Tevion card is recognized and works. There are a lot of bleating like a lost sheep on the run faster if connected to a USB 2 port, but if I plug it directly into the port from Toshiba it does not at all.

  Any ideas to solve this problem or similar experiences?

  Wizzer

  Is the gap of 4-port hub powered by the USB port of your satellite or is it a KVM?

  If self-powered it s then it s obviously needs a lot of power combo card reader which can be provided by all of your computers, but not the satellite.

  It is a theory that might make sense... :)

  Welcome them

• Equium A60 will not burn DVD - Mat * a replacement UJ-820 s?

  Hello

  My toshiba equium a60 will no more DVD burn.
  Can anyone help? Or I need a replacement dvd writer? Cheers ron

  > I need a replacement dvd burner
  It possible s that CD/DVD drive failure and that only the new would be useful.

  But first, you should try some common solution opportunities.

  -Try using different media DVD because not all CD/DVD are compatible!
  -Try to burn the DVD with another burning software (for example Nero Burning ROM)
  -Remove the drive from Device Manager CD/DVD and restart the laptop. After restarting again the OS should install the drive again.
  -Remove the Upperfilters and Lowerfilters completely from the following registry key values:
  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  If all of the procedures of this will be not useful so the replacement drive would probably be necessary.

• Equium A60 has recently started to overheat

  My Equium A60 has recently begun more heating really bad. It's at the stage where I can not install windows XP on it without him turning off during the installation of precession.

  Anyone know what could cause it to fire so quickly?

  Thanks in advance.

  Hello

  Especially the laptop overheats because the cooling module doesn t cool unique pieces in the right way.
  Fans do not twist full implementation because of the dust and debris inside the laptop.
  After a long time working, it s advisable to clean the cooling modules.

  How?
  Well, the simplest method is a use of the vacuum cleaner. But be careful

  If it helps the laptop must be checked by a technician.
  The technician can renew the thermal paste between the CPU and the cooling module.
  Important to take heat from the CPU thermal paste.

  Last but not least do not forget that there is enough free space around the laptop.
  The free space is important for air circulation correctly

• Equium A60 does not restart

  Hello

  My Equium A60 which I had since almost two years earlier this week crashed and does not restart. I met previous problems of slowness and the computer laptop closing (which I believe was down to heat), but it's much more serious.

  All that happens when I pass on is a black screen is displayed, as if the monitor does not work, and then after a few minutes it turns off, there is nothing really to go. Is there anyway I can record what's on my hard drive or who lost? Any help would be appreciated.

  Thank you

  You can try to connect the HARD drive to another laptop or desktop as an external device using the USB HDD box. The disc HARD should be recognized automatically and you can copy all of your files.

  Of course, this is possible if the HARD drive is not defective. I did several times with my old Satellite 1900 HDD. No problem at all.

  On your device, I can tell you just follow: after pressing the power button / stop if there is no activity (HDD led, display, the cooling fan noise) I guess the unit must be controlled by the service.