Coverting 2602 light to stand alone (for the site survey)

Similar Questions

• 2602 AP in stand-alone - using the two bands

  We generally use the series 2602 AP in light mode, however I have a scenario where we will install one with the stand-alone software.  I understand that we will not be able to utilze certain features that you get with the WLC as RRM, unreliable detection and clean air.

  We want to utilze the 5 GHz and 2.4 GHZ bands.  To do this with the autonomous access point 2602, will we have to set up 2 separate SSID?  I really don't want to do this if I don't have to minimize confusion for customers. Thank you.

  This decision is based on the client machines.  The device will choose who it will associate with.  You could always tweaking the settings on the device wireless to a single band favorite on the other.  There isn't any setting on the AP have devices prefer one over the other.  I hope this helps.

  Thank you

  Scott

  Help others by using the rating system and marking answers questions as 'response '.

• Design options for the site survey

  I'm looking to set up a vote on a site section. The results of this survey will be displayed on a separate page, unprecedented for the customer.

  2 questions:

  (a) srite got responses from the survey in a PHP file and my results out of this base file page?

  (b) it would be slower and more effective approach?

  Record server behavior insert to insert voting poll in the database, and then use the query to display the results. No hand-holding, with examples of code sorry but you should have enough to go. Basically to have a DB configuration with auto-increment id, vote_id, user_ip, answer_1, answer_2, answer3 etc, then having insert record SB to insert data in the database. After that, use a query (recordset) to get the results and display on the page. You will need to use a little math php if you want to display the percentages of votes, etc., but this is the basic idea. http://PHP.NET has much info and http://mysql.com is also an informative site. user_ip is in the comic book to prevent users to vote several times from the same IP address, or you could use via the session variable user_id and don't allow users to record in the opportunity to vote to restrict logged users to be able to vote more than once in a poll.

• Hi, I bought yesterday LR6 stand alone, but the version seems to be only 6.0 instead of 6.3 minimum required to open files CR2 as ISC technical level given by Adobe. How is it possible to upgrade?

  Hi, I bought yesterday LR6 stand alone, but the version seems to be only 6.0 instead of 6.3 minimum required to open files CR2 as ISC technical level given by Adobe. How is it possible to upgrade?

  Check the menu: help-> updates...

  Or download the updates from here to there: Install Photoshop Lightroom

  Note: v6.4 is the most recent and the most stable.

• After I reset my Firefox browser"remember password for the site" options is disable.

  After I reset my Firefox browser"remember password for the site" options is disable.

  Hello karim138, firefox will not save your passwords when you put to execution in permanent private browsing mode ("never remember history" in options > Privacy panel).

  Privacy, historical settings of navigation and-no-track

• No VRM server registered with vCenter Server for the site 'Live '.

  I have SRM 6.1 and vSphere replication 6.1 installed on both sites.

  The ECP is connected to the vCenter server.

  I get this error message: failed to create the protection group. No VRM server registered with vCenter Server for the site 'Live '.

  Screenshot attached, no one knows what is happening here?

  

  However, there was a mismatch in the meantime server on all except VRA in the remote site, it is now resolved and the issue disappeared.

  Strange, how the error related to the site online, however.

  Thank you for pointing me in the right direction.

• In the browser of Muse CC edition there was a problem reading the manifest file Adobe Muse CC for the site - how to fix this?

  I just uploaded the site via the built in ftp upload in muse he then uploaded successfully. When I go in the edition of the browser and enter the name of the site (mernaliddawi.com) it says then this "there was a problem reading the file of Adobe Muse CC manifest for the site. Since Adobe Muse CC use file > load on the FTP host... to export the new site. ' I then exported the site again, but it still does not work also, I went my hosting provider file manager and deleted the file muse_mainfest.xml and then re uploaded still no chance. " How can I fix this thank you, james.

  You need to transfer your domain to your new site. At present, the URL http://mernaliddawi.com/ is a web page that encapsulates the http://mernaliddawicom.ipage.com/ in a frameset. This isn't how a domain is successfully transferred. He doesn't bother with editing in the browser, will prevent redirection to versions Tablet and phone of your site (if you create), and can cause other problems.

  If you enter mernaliddawicom.ipage.com to inbrowserediting.adobe.com it will not work, because this is the URL where your site is currently hosted.

• GI for a stand-alone inside the secondary zone

  Hello world.

  I try to install IM in Solaris 11.1 secondary zone.

  I perform software installation only:

  ...

  Software installation successfully.

  After I perform a GI for stand-alone root scripts:

  root@db1:/tmp# /u01/app/11.2.0/grid/perl/bin/perl-I/u01/app/11.2.0/grid/perl/lib-I/u01/app/11.2.0/grid/crs/install /u01/app/11.2.0/grid/crs/install/roothas.pl

  The file of configuration settings using: /u01/app/11.2.0/grid/crs/install/crsconfig_params

  Create the trace directory

  User ignored the prerequisites during installation

  LD.so.1:: ocrconfig.bin: fatal: /u01/app/11.2.0/grid/lib/libclntsh.so.11.1: unknown file type

  LD.so.1:: clscfg.bin: fatal: /u01/app/11.2.0/grid/lib/libclntsh.so.11.1: unknown file type

  LD.so.1:: clscfg.bin: fatal: /u01/app/11.2.0/grid/lib/libclntsh.so.11.1: unknown file type

  Failure with signal control 9: /u01/app/11.2.0/grid/bin/clscfg-local g asmadmin

  Creating OCR only local (local /u01/app/11.2.0/grid/bin/clscfg-asmadmin - g)... failed

  The /u01/app/11.2.0/grid/lib/libclntsh.so.11.1 file are of size zero:
  

  root@db1:/tmp# du-sh /u01/app/11.2.0/grid/lib/libclntsh.so.11.1

  0K /u01/app/11.2.0/grid/lib/libclntsh.so.11.1

  In the global zone, all right.

  ...

  Software installation successfully.

  Configuration of IM for standalone:

  root@Exadata:/tmp# /u01/app/11.2.0/grid/perl/bin/perl-I/u01/app/11.2.0/grid/perl/lib-I/u01/app/11.2.0/grid/crs/install /u01/app/11.2.0/grid/crs/install/roothas.pl

  The file of configuration settings using: /u01/app/11.2.0/grid/crs/install/crsconfig_params

  Create the trace directory

  User ignored the prerequisites during installation

  ADD LOCAL MODE

  Creating OCR keys for the user "grid", privgrp 'oinstall '...

  Successful operation.

  LOCAL ONLY MODE

  Successfully accumulated necessary OCR keys.

  Creating OCR keys for the user "root", "root"... privgrp

  Successful operation.

  CRS-4664: node exadata pinned successfully.

  Adding Clusterware entries to inittab

  Exadata 2014/03/02 19:35:36 /u01/app/11.2.0/grid/cdata/exadata/backup_20140302_193536.olr

  Grid infrastructure Oracle correctly configured for a stand-alone server

  root@Exadata:/tmp# du-sh /u01/app/11.2.0/grid/lib/libclntsh.so.11.1

  /U01/app/11.2.0/grid/lib/libclntsh.so.11.1 51 M

  The installation directory is the same for the global zone and zub-zone (fs just loop back).

  I can't copy valid libclntsh.so.11.1 in the secondary area before configuring, but what happens?

  Hello

  Solaris zones are not all packages from the global zone. A default area is an imprint of very thin bones were you add several packages.

  That's what I've done for solaris:

  pkg install/system/solaris-big-server group

  pkg install xclock libxmuu x 11-info-clients compatibility/ucb

  pkg install SUNWarc SUNWbtool SUNWhea SUNWlibC SUNWlibm SUNWlibms SUNWsprot SUNWtoo SUNWcsl SUNWxcu4 pkg://solaris/SUNWxwplt

  Great server to get a lot of useful tools

  connection for Yes and ucb package is needed to patch it with opatch

  third line are the requirements for solaris, as documented in the manual and where applicable under solaris 11

  Concerning

  Thomas

• I have CC Photoshop photography program (PS and LR), installed on 2 Macs, purchased Lightroom 6 Stand alone for a 3rd another macbook (with the same Adobe ID cc). On 3rd laptop, I get error "Activation limit".

  I thought that LR stand alone office is independent of the installation CC limit? How can I get the stand alone LR6 activated on the 3rd macbook?

  Yes, exactly, you should use separate E-mail identification.

  Even if you had bought the standalone product LR with an Adobe ID, you can use different ID to connect, which is not a problem.

• Conversion of Cisco Aironet 1130AG light in stand-alone mode

  Hello

  I just bought AIR-LAP1131AG. Unfortunately, I want stand-alone and not lightweight fashion.

  Yes, is there a procedure to convert to "AIR-AP1131AG?

  Thank you.

  Hello Michael,

  Yes, please follow this procedure for TFTP Re-imaging

  / * Style definitions * / table. MsoNormalTable {mso-style-name: "Table Normal" "; mso-knew-rowband-size: 0; mso-knew-colband-size: 0; mso-style - noshow:yes; mso-style-priority: 99; mso-style-parent:" ";" mso-padding-alt: 0 to 5.4pt 0 to 5.4pt; mso-para-margin: 0; mso-para-margin-bottom: .0001pt; mso-pagination: widow-orphan; do-size: 10.0pt; do-family: "Times New Roman", "serif" ;} "}

  1) Go to your Computer and from the tool menu -> folder options ->uncheck the hide extensions for known file types option. 

  2) Download the IOS image ( you can get this ios image from cisco.com) on your desktop.

  3) Rename the image into c1130-k9w7-tar.default

  4) Give your computer Ethernet an address in the range 10.0.0.2 till

  10.0.0.30

  5) Run the tftp server on your computer.

      - Make sure that the directory of your tftp server is the desktop.

      - Specify the AP address on the tftp server if needed.

  6) Connect the AP to the computer with Ethernet cable.

  7) Remove the power from the AP.

  8) Press and hold Mode button on the AP, and insert the power jacket in the AP.

  9) Keep pressing on the Mode button for (20-30 seconds) until you see RED Led.

  10) Wait until the image installed and all led lights return to green 

  doesn't make sure that no firewall or antivrus is running on your computer.

  I hope this helps.

  Kind regards

  Talal

  =============

  Please note the answers that will help you

• Change IOS on AP 1131AG light to stand alone

  Hi experts,

  can anyone advice if the ap 1131ag IOS can be changed to stand alone? can you give me a link where I could get a standalone IOS and how? Thank you!

  Follow these steps to return mode LWAPP stand-alone mode by loading a version of Cisco IOS using a TFTP server:

  Step 1 the IP address of the computer on which the server software runs TFTP should range from 10.0.0.2 to 10.0.0.30.

  Step 2 make sure the PC contains the file access point (for example, c1200-k9w7 - tar.122 - 15.JA.tar for a 1200 Series access point) in the TFTP server folder and the TFTP server is activated.

  Step 3 set the timeout on the TFTP server in 30 seconds.

  Step 4 on the PC where, the TFTP server perform the following steps:

  a. disable the firewall, such as Windows, ZoneAlarm firewall firewall software, McAffee firewall or other.

  b. ensure that all Windows are visible. In Windows Explorer, click Tools > Folder Options > view. Deselect hide them extensions of known file types check box.

  Step 5, rename the access point image file in the folder of the server TFTP c1200-k9w7 - tar.default for a series of 1200 access point, c1130-k9w7 - tar.default for a series of 1130 access point, c1240-k9w7 - tar.default for a 1240 series access point and c1250-k9w7 - tar.default for a 1250 series access point.

  Step 6 connect the PC to the access point using an Ethernet category 5 cable (CAT5).

  Step 7 disconnect the power to the access point.

  Step 8 push the MODE button and hold the button while you reconnect power to the access point.

  Step 9 hold the MODE button until the status LED turns red (approximately 20 to 30 seconds), then release.

  Step 10 wait until restarting access point, as indicated by the LEDs become green followed the status LED flashes green.

  Step 11 after the access point reboots, reconfigure using the GUI or the CLI.

• Is it possible to buy Lightroom as a stand-alone without the cloud?

  I really don't want to download anything for the "cloud." no pictures, no documents not a BLT half-eaten.  Is it possible to buy Adobe Lightroom as a stand-alone product without the adhesion of cloud?  If so, how?  I searched and could not find a stand-alone option.

  Hi Manon,.

  Yes, you can purchase stand-alone 6 Lightroom available here: Software & Services

  And by buying the subscription of cloud creative, photos, documents or anything that does not get uploaded to the cloud by default.

  You would have that full access if you want to store anything online or not.

  Lightroom would be installed locally on your machine and everything, including the Lightroom Catalog, photos and everything will remain on your machine and not on the clouds.

  Here is the difference that you can see: compare Lightroom CC vs versions 5 & 6 | History of Adobe Photoshop Lightroom CC

  Kind regards

  Claes

• Move P6 E8.1 Stand Alone for new PC?

  We have a stand alone version of P6 with Oracle Express local base installed on a single PC. We need to transfer to a new computer. I installed PC on the new machine, but finds it difficult to understand how to transfer the data across.
  
  I'm completely new to both Primavera and Oracle for any help that can be given would be welcome.
  
  Thank you

  Hello
  You have different options to transfer your data.
  (1) your projects in SET or XML files to export and import into your new PC. (will not export obs, put on the page, ect)
  (2) backup of your database with the exp method and imported into your new computer
  (3) to migrate all your information database from the old computer to your new computer with the migrate.bat tool (in the press kit)

  Best regards!

• To cancel light continues to Flash for the last 2 days on my HP 6500 all on the printer.

  Light to cancel on my HP Office jet 6500 all-in-One Printer E709 help a series continues to Flash for the past 2 days, I changed the thinking of the ink that was the problem, but he did not. I unplugged all caps for about two minutes, then the replugged and nothing helped.  I was doing a copy 2 days ago and the paper stuck, I was able to recover all of the sheet, but since then I'm unable to use the printer.  I can't make copies; I can not print nor can I fax this printer.  What can I do?

  Bob_Headrick thanks for the info but I got intouch with the HP company directly, it seems to be a hardware problem.  They no longer support this printer, but gave a good discounted price for a newer version, I'm happy with.

• I have blocked the images for the site how to unlock the

  I clicked block images for khanacademy.org and when it loaded a new page all images where gone and how I got to the window that locked was I clicked on an image and one of the options but now there are only two!

  You can control and manage permissions for the domain in the tab currently selected through these steps:

  • Click the address bar onthe Site identity button"(globe/lock)
  • Click on 'More information' to open ' tools > Page Info "with the Security tab is selected
  • Go to the permissions tab (Tools > Page Info > permissions) to check the permissions for the domain in the currently selected tab

  You can control and manage permissions for all areas on the Subject: authorizations page.

  • https://support.Mozilla.org/KB/how-do-i-manage-website-permissions

  You can check the "tools > Page Info > media ' for blocked images

  • Select the first link of the image, and then use the cursor key to scroll the list.
  • If an image in the list is grayed out and 'block Images of..."is checked then uncheck this box to unlock pictures of this area.