CP10518ni: Manual two-sided printing problems

Similar Questions

• HP Photosmart 2610 all-in-One, Manual Two - Sided Printing, HP support email Ticket number: 8028153835

  E-mail HP supports, ticket no: 8028153835

  I bought my printer all-in-one HP Photosmart 2610 in 2005. It has already been installed on a HP laptop, Windows XP computer, and worked all the features.

  He is now on a PC running Windows Vista Ultimate 32. When I tried to install the CD, it wouldn't load because of the Vista OS. Then, I loaded the printer driver HP Photosmart 2600 series full of features (Vista compatible OS) to the following HP Web site link:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=MP-47754-1&LC=en&DLC=en&cc=us&...

  Now I can't get the print preferences to print (double-sided) of manually printing two-sided. This option is available on the original printing software.

  I tried the solutions: HP Image Zone help / duplex prints that show: click the finished tab / in the Document options box / select print on both sides checkbox (this check box is not available).

  When I run the printer of the Panel as an administrator, the printer properties / device watch manual duplex settings: enabled.  When I go to the printer properties / Advanced / impression of the default values, or the finish / Print On Both Sides checkbox is available nor printing Shortcuts tab will allow the option Print On Both Sides to appear (shows that Print On Both Sides: Off).

  E-mail support HP told me to install this patch to correct the problem:

  http://h10025.www1.HP.com/ewfrf/wc/genericSoftwareDownloadIndex?softwareitem=MP-69848-1&cc=us&LC=en&...

  When I try to install the patch, it will not load because he wants the original CD software. So I'm back to my original problem trying to load the original printing software does not load because the CD is for Windows XP operating system. I'm in the stalemate between the software CD I have, and what is available on the HP site.

  What is your solution?

  I chatted with a HP technician online today.  I had the same problem with Vista, not to recognize the Manual 2 sides print.  His solution was to add a new printer, the HP Deskjet 6500.  This works!

  Go to control panel, hardware and sound, add a printer, add a local printer, select port to use, select HP Deskjet 6500, following, then select if you want whether it is your default printer and then click Next.

  Two back will be available when you select the Deskjet 6500 as your printer, even if you actually use your HP 2610.

• LaserJet P2055d: LaserJet P2055d two-sided printing problems

  I have a new computer with Windows 10.  I have connected my LaserJet P2055d and recognized Windows and the driver PLC6.  I don't have the ability to print double-sided, like I did when I was with this printer with a computer running Windows 7.  Any advice would be appreciated on how to acquire the ability to do double-sided printing.

  The function "automatic detection" used by some drivers on the install (or update) does not always; make sure the driver knows that a duplex unit is present on the printer (assuming that a single is present):

  • For the instance of the printer in question, bring up the printer properties dialogue.
  • Select the device settings tab.
  • Make sure the duplex unit is set to installed and not installed.

  You will probably need to be logged in with administrator credentials in order to change the settings of the device.

• How to enable two-sided printing on MacBook Pro with Canon MX490 printer

  Hello

  I have the MacBook Pro (retina, 13-inch, early 2013) and OS X version 10.11.4 (15E65) and Printer series Canon MX490.

  When I try to make a double-sided, the printer settings printing does not allow me activate two-sided printing.

  

  Also when I go into the settings of the printer, there is no option for me to select this option to enable printing double-sided or duplex printing etc..

  

  When I try to print with TextEdit settings, I still get the same printer settings and it does not allow me to enable two-sided printing.

  I couldn't find answers online, and frankly it's frustrating. I would appreciate if anyone can help with the problem.

  Thank you very much!

  This is the screenshot of the settings under the printer to textedit. Sorry I don't tie with the original message earlier.

  

• Photosmart 7525 does not as advertised two-sided printing

  I just bought a printer Photosmart 7525, partly because my upgrade to Maverick on my MAC is my 3200 Series obsolete and she was acting strangely.  The new printer has taken longer to implement than I expected (not exactly an intuitive process and he had not provided all the guidance documents). I managed to get more work, but there is no option to select two-sided printing when you print directly from Word. I had to go through 3 non-intuitive screens to find the print options for the pages even / odd - it's much easier to save in pdf format and get rid of Acrobat.  But I still do not think the double-sided printing option that is promised in the product documentation.  I find some online reviews maybe I need an accessory, but I thought that the product has come with the ability.

  Please notify.

  Thank you

  Hi hybridgeek,

  Thanks for keeping me posted. Unlike programs preinstalled, Mac print options two sides is hidden in settings. If you open the print dialog box, click on the area of lowest selection - Copies & Pages, select from the drop down.

  Set the duplex option as the binding Edge Long (Portrait) or binding Long Edge (landscape). You can save the settings for later use by clicking preset > save current settings as a preset and naming.

  Source: Post Re the ShlomiL: how to double face printed word when NO option for "2 Facer" when printing on HP

  Please let me know if that fixes the problem, thank you

• C7250 printing duplex job, popup saying "automatic two-sided printing Module missing."

  Hi, whenever I try to print double-sided, I get the popup that says:

  "The document has been configured to print by using the Automatic Two-Sided Printing Module, but module is not installed in the device. The document will be printed recto. »

  After I pressed the 'Print' button, job goes to the printer and print OK as a duplication. You can fix this? I have this problem for a year now, and I'm tempted to this problem.

  And he sees in duplex printer properties.

  Thank you.

  Looks like the problem disappeared after the software update. Thank you!

• HP Laserjet M553: HP Laserjet M553 leaves two-sided printing

  I'm running 10 Windows on a desktop HP Envy with a printer HP Laserjet M553. I have this printer for a little more than a month.  I was able to print two-sided dox on this printer with only one or two times before this opportunity not to print on one page (front and back).  In these situations, I was able to stop the printer and the computer, and then restart both and duplexing continued.  Now, happened for the 3rd time after several weeks of use unless it occurs and it refuses to print duplex style once rebooted, even having to sit off the power, unplug computer and wall of a catch of the day to the next.  Anyone else have this problem or have any suggestions as to why this is occuring?

  Unless you send a primitive regime print jobs (such as DOS, or non-TASSES * n * x systems), default values or settings of the printer itself will not usually come into play.

  With print jobs generated by modern windows and * n * x systems, the printing itself must contain printer-language 'orders' to select the mode of plex. the printer should just obey them.

  The only possible exception is if you chose some document types (e.g., transparency); for these types of paper, you must use "manual duplex printing" rather than "auto duplex printing.

  Maybe you (inadvertently) select printing in your application, or preferably driver printer settings?

• HP OfficeJet Pro 8610: my printer HP Officejet pro 8610 ceased two-sided printing

  Even if I check duplex printing as my selection, the print job is unilateral.  This feature is used to work perfectly.  Does anyone know how to fix this?

  Hi @-donna-1,.

  Thanks for getting back to me.

  Did you follow the steps described in the guide to see if you have the HP two sides printing accessory (duplexer) installed?

  In the section: How can I auto duplex if my printer support?

  If the problem persists, follow these steps:

  Fix permissions of the drive on the Mac:

  1. Close all applications.
  2. In the Apple menu, click OK, click Applications, and then click utilities.
  3. Double-click disk utility.
  4. Highlight your hard drive / partition on the left.
  5. Click on check and then repair disk permissions.
  6. Restart the computer.

  Reset the printing system:

  Note: This will remove all printers in the print and Fax/Scan, any printer deleted can be re-added later by clicking the sign plus (+) symbol.

  1. Click on the Apple icon and then click on System Preferences.
  2. Click on printers and scanners.
  3. Make a right click (or Ctrl + click) in the left white side panel, and then click Reset Printing System.
  4. Click OK to confirm the reset.
  5. Type the name and the correct password.
  6. Click OK to reset the printing system.

  Add the printer:

  1. Then click the + to add the driver, select the printer (you may need to click the drop down menu to select the name of the printer).
  2. Then click the Add button. Do not add the AirPrint driver.
  3. Now, try to double-sided printing.

  I hope this helps.

• Implemented two-sided printing on Envy 5532

  I must say that documentation that accompanies my desire 5532 was pretty non-existent.  I use the printer with a HP Pavilion laptop wireless, an Apple MacBook laptop and an Apple iPad.  I have several questions about printing with my Envy 5532 printer:

  (1) how to set 2-sided?

  (2) can I toggle back and forth between tradional 1 sided print and print 2 sides?

  (3) what is the best way to turn the print quality (normal Fast<=> ?

  Thank you

  Blazer 5

  Hi @Blazer5,

  Welcome to the HP Forums!

  I see you're wondering how to set up printing double-sided with your HP Envy 5532. I'm happy to help you!

  To set up duplex printing, I recommend you to go through this guide, print on both sides of the paper (duplex) for HP ENVY 5530 e-all-in-one and Deskjet Ink Advantage 4510 e - all-in - One Printer Series, such that it has instructions for Windows and Mac. Also, here are some tips for you to follow:

  Include the following can help you to avoid potential problems when printing on both sides of the page.
  Do not print on both sides of the following types of paper, or jams may occur:

  • Transparencies
  • Envelopes
  • Photo paper
  • Glossy paper
  • Paper lighter than 60 g/m2 (16 lb).
  • Heavier than 105 g/m2 (28 lb) paper.

  Several kinds of paper require a specific orientation when you print on both sides of a sheet. It's letterhead, preprinted paper and paper with watermarks and pre-perfores holes. The printer will print the first side of the first book. Load paper with the top edge first and the side to be printed facing downwards.

  In addition, this post, Vista / Win 7 Duplex printing Troubleshooting Guide, by @Bob_Headrick. Maybe some answers for you as well.

  In the print dialog box (after selection file and print), you will see a box next to duplex printing, which can be checked or unchecked, to toggle between the two functions.

  To change the print quality, you want to go through this guide, the series e-all-in-one HP ENVY 5530 and series of e-all-in-one HP Deskjet Ink Advantage 4510 - Print Documents (Windows).

  For future reference, here is the user guidefor your printer.

  I hope this helps!

• Need help with the issue of two-sided printing

  We have a printer D1350.  It is directly connected to a PC and shared with other computers on our network.  In the past I printed two-sided with binding on the long edge with no problems at any one of the computers.  Recently he began to ignore my settings and print double-sided copies with link short edge no matter how I said to print from a PC.  All other PCs are able to print correctly.

  All PC's had Windows 7 OS when the problem started.

  We have upgraded to Windows 10 and the printer does not at all, we uninstalled the printer drivers and then re-installed both and it will not print correctly from a PC.

  I checked for updated drivers, still will not print properly with a PC.

  What arrangement could have changed on this PC it's ruin?

  Help!

  This is not a Canon support site. Its a forum of the users in charge.

  Give Canon a call at 1-800-OK-CANON.

• Automatic two-sided printing

  Software for the D5360 does not support two-sided automatic printing in Windows 7. It must turn the page manually. Is there a work around for this?

  Hi Malcolm,.

  I had this printer before, then maybe we might be able to understand this.

  A couple of things to check:

  1. Automatic printing equipment 2 faces is firmly attached to the back of the printer:
     1. If you look at the back of the printer, you should see an attachment to the rectangular research that fits on the back of the printer... This is what really turns the paper upside: check that it is firmly fixed on the back of the camera.
  2. Open the printer properties dialog to verify that "Auto" is not an option in the "duplex printing" drop-down menu.
     1. Probably the easiest to go to 'START' / 'Devices and printers' and right click on the printer icon, then select "Print Options".
  3. Click on the tab "features."
  4. On the right side, the 'paper Saving Options' shows ' double-sided printing: ": click on the dropdown under that to see what options are available to you... you should see"Off","Manual"and"Automatic"."
     1. If automatic is there, select it and then try to print a double-sided document.
  5. If you do not see "Automatic", close this dialog box for now.
  6. To return to the dialog box "Devices and printers", right-click on your printer icon again and this time select "printer properties".
  7. Select the tab "device settings".
  8. At the bottom of the dialog box, you should see "installation Options".
     1. "A two-sided (for printing on 2 sides) unit:" is to be considered... with two options: "Installed" or "not installed."
     2. Make sure that "Installed" is selected.
  9. Click on apply, then OK.
  10. Then, return the properties of the printer as before and make sure that the option "Automatic" is available and active... and then try to print a document both sides.

  Oh... and by the way... you happen to see error messages, etc.? Or is printing automatic duplex not an option your seenig?

  Kind regards

  -Paper

• Example: HP PHOTOSMART 7529e: how to make two-sided printing automatically with printer HP 7520

  All I'm doing is to make my printer two sided front or double.  No matter what I check IT DOES NOT WORK.  I checked "2 sides, 1-2, NOTHING.  What amazes me is that it worked until recently and now he just does not have double-sided printing.  I'm probably doing something wrong, but WHAT?

  filgrastin

  In General, duplex printing is consulted / adjusted printing preferences.

  If you print from an application, for example, in Word or in your browser, you reach the printing of the preview preferences before printing.

  Reference:

  Manage the print with preview output before printing

  Excerpt:

  • Print - print options access preview

  The browser page > file > print > properties

  Access Printing Preferencesproperties:

  Paper Source (tray selection), paper size, media, Orientation, print on both sides, page order

  Reference: Printing Preferences

  ================================================

  Click on the thumbs-up Kudos to say thank you!

  And... Click on accept as Solution when my answer provides a fix or a workaround!

  I am happy to provide assistance on behalf of HP. I do not work for HP.

• What would cause two-sided printing is not working properly in Acrobat Pro and InDesign?

  I need help with a problem of double-sided printing that occurs only with a document created in InDesign, and then turned into a PDF Acrobat file. It is a simple single page 3, paper 8.5 x 11 with nothing weighs on the marges.5. I went to print it out on my Epson Stylus 7620 duplex, but it does not print correctly. It is printing page 1 on a single sheet of paper without even attempting to add the second page. Then it prints the third AND second double-sided pages. I looked to make sure that there is no box "print separate cover page" checked. I also made sure 'normal pages order' has been selected and not reversed. I checked to make sure that nothing was hanged on the page which may cause the printer to that there is an additional page between pages 1 and 2. I turned the document to Adobe PDF (for InDesign), but the PDF did the same thing. It prints 2-3 as a double-sided pages and page 1 on one page on a single sheet of paper. Obviously, I want 1-2 pages to print double-sided and 3 of the page into a single page. I called Epson, but they said that because other documents are printing correctly, it is not a printer problem, but Adobe software / printer box question, very probably in the InDesign document. I can't find. Has anyone else encountered this problem? Can someone help me with this?

  Using Acrobat Pro and InDesign in creative cloud. MacBook Pro running 10.11.4

  You'd better ask this question in the InDesign forum where more people we'll see.

• OfficeJet Pro 8620: Problem with two-sided printing by default settings Officejet Pro 8620.

  On my MAC, I opened the preferences system - print & Scan - Options & supplies, the pop up window only contains two tabs: Gerneral and power levels. The other tabs such as the default settings are not displayed. So I can't set default 2 Facer of printing. In such a case, I find that I can always print both ways in the face of some software where I can change the settings for print specifically in this software. But I can't change the settings of the printer in Adobe Acrobat format, because change is always through the same interface as I mention above. How I solve the problem? I am connected to my printer via wifi. Thank you.

  

  Hello

  In Adobe Acrobat, open the print dialog box, and then click on the "Printer" button... "to access the print dialog box standard operating system.

  There should not be a default on a Mac tab, the settings can be saved as default recording these as a preset in the print dialog box, then a used preset will be default.

  Shlomi

• 6980 HP on network, no two-sided printing unit equipped with Windows 8 Pro. Not available manual duplex printing

  Windows 8 picked up my network printer and installed the drivers very well.

  When I go to print, "manual duplex printing" is not available on PRINT ON BOTH SIDES.

  The only option is 'off '.

  Went through Control Panel to CUSTOMIZE YOUR PRINTER and manual duplexing is enabled for this printer!

  Kind regards

  Richard

  PS works fine on my machine windows 7 on the same network

  New driver for 6980 downloaded automatically by windows 8. Now works fine