Cp8: Advanced - Interactions cannot get 'Forced browsing' through the buttons

Similar Questions

• Error message when you try to download Windows Defender: "first remove Microsoft Client Protection." Cannot find this file through the Add/Remove, search, including hidden or Win Explorer.

  Original title: trying to download

  WinXP SP3, Security Scan run and d/ld: error message when you try to download Windows Defender: "first remove Microsoft Client Protection." Cannot find this file through the Add/Remove, search, including hidden or Win Explorer. What to do now would be much appreciated.

  Also have a related problem about MS Maliciouws software removal tool. For download, but read in the KB that: in XP, the vacuum cleaner will remove the malware, but doing so may trigger the File Protection Win with damages to my operating system.  the tool will attempt to repair the damage, but to rehabilitate prior to infection, that I need to insert the CD of Win. As my computer came with Windows preinstalled, I do not have a disk and will not take the risk of damage, that I can't fix. Do I not download or not... ? Another solution... ?  I also fear that this tool could settle into the routine Win Update and need guidance on the prevention of this facility, if possible, or what to do if it cannot be prevented.

  It can have nothing to do with any of the foregoing. " I'm relaying only because it occurred during the same mission of update: had msg of error that Win Firewall has not been set as a default, which reset, but found this hidden file when searching for the Protection of the customer: "Win 32/Hackdef' - it was a config with the extension ini file and was deleted by Scan."

  Thanks a lot for any assistance.

  scate 39

  Hello

  ·         You have Microsoft Security Essentials on your computer?

  If you have windows installed on your computer security essentials, then you will not be able to install Windows defender. Windows Security Essentials has antispyware component installed.

  You get the error because you have installed MS Security Essentials, which has its own function to antimalware. You don't need or want to install Windows Defender, too. Leave MS Security Essentials installed and do not turn it off.

  See also:

  You can turn on or turn on the firewall in Windows XP, please see the link below:

  http://support.Microsoft.com/kb/283673

• Cannot get CF11 to download the free trial version for students.  Anyone having the same problem with the Adobe site?

  Cannot get CF11 to download the free trial version for students.  Anyone having the same problem with the Adobe site?

  Hello

  Please download from http://www.adobe.com/cfusion/tdrc/index.cfm?product=coldfusion&promoid=DJDUK use your Adobe ID and password to login and download CF11.

  Let me know in the case where you are facing any problems during the download, if you get any error try another browser.

  Thank you

  Priyank

• How can I find my username and password for Windows xp media center? don't remember setting but cannot get back in after the restart.

  How can I find my username and password for Windows xp media center? don't remember setting but cannot get back in after the restart.

  Hi Carol_971,

  1. Did you the latest changes on the computer?
  2. You have security software installed on the computer?

  Method 1

  I suggest that you try to start in safe mode and then try to log on to Windows using the default Administrator account and then remove the password for your account, check if it helps.

  A description of the options to start in Windows XP Mode

  http://support.Microsoft.com/kb/315222

  Method 2

  If you are unable to log on to Windows in safe mode, refer to the article below and then try the steps mentioned, check if it helps.

  How to connect to your Windows XP-based computer if you forget your password or if your password expires

  http://support.Microsoft.com/kb/321305

• Cannot get any browser to view a web page.

  Vista problem - dns related navigation

  I am running Vista on a laptop computer with connection mobile broadband and a standard dial-up connection. I connect directly to the internet and have no router or other devices on the network. I'm having a problem getting any browser to operate. IE 9 says that it cannot display the web page, and Chrome gives me a dns error message. I can ping to a numeric ip address, but I can't ping an address like www.google.com.

  What I tried:

  I ran two different anti-virus programs to check the virus. None have been found.

  I reset IE 9.

  Checked to see if the connection has been put in place in order to get the dns settings automatically and when this does not work, I tried to manually enter the IP addresses of known dns servers. It didn't work either so I went back to the automatic selection.

  I have disabled all programs to determine if there was a conflict from starting.

  I emptied the dns cache and reset winsock.

  I have reset TCP/IP according to the instructions I found on this site.

  I removed all anti-virus programs, thinking we could have a hidden firewall that was blocking me.

  None of this solves the problem. I ran ipconfig/all and there's ip address for dns servers.

  I'm puzzled. This problem occurred when I installed a program to dial for my dial-up service. I uninstalled the program, but that has not solved the problem. Another fact that may or may not be relevant, is that I also lost all my printing capabilities (no printer approved and it will not let me install a).

  Any help would be greatly appreciated because my computer is now almost useless.

  Edit: I use the same ISP of this post (on another computer) so I know that the problem is not at the isp. I would also add that Windows diagnostics are not useful. He just tells me to connect a LAN cable. I would also add that I can actually use Skype so I know that I connect to the internet ok. nslookup works.

  Hi WinVista007,
  have you tried a system restore?
  If you have a restore repointer forward this question comes up, I would say that that restoration. It causes makes it sound like some reg problems (but please don't use a reg cleaner)
  Let us know what happens
  B Eddie

• Cannot get new url of the tab open with the homepage (Google).

  After the upgrade, I cannot get rid of 12 boxes (Facebook, Youtube, etc.) on the new tab or make open with my homepage (Google). I tried two different newtaburl add-on, uninstall and reinstall Firefox and the directives of the object: subject: config, browser.newtab.url, etc. I can't even scratch try this approach. I can't get the 12 bar blues.

  Well, I know I'm repeating something you've read before, but just for completeness (and also, I suspect this isn't built-in Firefox page):

  (1) in a new tab, type or paste Subject: config in the address bar and press ENTER. Click on the button promising to be careful.

  (2) in the search above the list box, type or paste newtab and make a pause so that the list is filtered

  (3) double-click the preference browser.newtab.url and enter your favorite page:

  • (Default) page thumbnails = > subject: newtab
  • Blank tab = > subject: empty
  • Built-in Firefox homepage = > topic: welcome
  • Any other page = > full URL of the page

  Press Ctrl + t to open a new tab and check that it worked. Fixed?

  Some traps:

  If Firefox will not let you change this setting: you can have what is called SearchProtect on your system.

  Firefox if allows you to save your changes, but he doesn't know: one of your extensions may be the substitution of her. You can consult, disable and/or remove extensions on page modules. Either:

  • CTRL + SHIFT + a
  • "3-bar" menu button (or tools) > Add-ons

  In the left column, click on Extensions

  If the modification works during your session, but during the next startup is return to the unwanted page: you could have a user.js file in your personal settings Firefox (your Firefox profile folder). This article describes how to track down and delete the file: How to fix preferences that will not save.

  A little luck?

• Cannot access my router through the Explorer configuration page

  I need to do a port forwarding on my router. My internet connection works (even if she falls occasionally) and I can also connect to other computers on my network. However, I cannot access my router through IE page (I get a message saying: page not found). When I go see the map in the options Vista network, the router is not displayed and when I clikc on "See the whole map", I get a message saying that Windows cannot detect any computer or devices.

  My connection to the router is connected, and it is a WRT54G Lyinksys. Any ideas how I can see my router or go to its page layout? Another thing, I went to CMD and the ping command returns a default gateway 192.168.1.1, which is what I have my using the address of the webb page.

  Thanks for any help.

  Hi JBHPUser,
  
  (a) other router configuration page, you are able to access other Web sites?
   
  (b) what operating system and Internet Explorer version do you use?
   
  This article can be very useful.
   
  You receive an error message in Internet Explorer: "Internet Explorer cannot display the webpage".
  http://support.Microsoft.com/kb/956196
   
  You can also access these links, which is primarily for Windows Vista, but are also applies to Windows 7
   
  
  Solve problems with computers not appearing is not in the network map
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-computers-not-appearing-on-the-network-map
   
  Network connection problems
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-connection-problems
   
   
  
  Aziz Nadeem - Microsoft Support

• Browse through the pages and add the text box

  I'm trying to navigate through the pages of a document (to simplify, let's say there are 5 pages) and perform certain tasks (for simplicity, say add a text box) on each page.

  Using VBScript, my thoughts are something like:

  Define myPages = myDocument.Pages

  I have = 1

  do until I have 5 >

  myPages.Item (i). Select()

  Set myTextFrame = myDocument.ActivePage.TextFrames.Add

  myTextFrame.Contents = "Hello, World".

  i = i + 1

  loop

  
  

  should work.

  
  

  But the best I can do (when I'm not getting syntax error messages) is to get the written text several times on one page.

  
  

  I know that there is a simple solution that I'm missing.

  
  

  Any suggestions?

  
  

  Thank you.

  You should probably add () after adding

  P.

• Browse through the pages

  Hello

  I'm creating a native application that has a list of items. When an item is selected, navigates to a particular page. I could not navigate to another page. Please help me with the code to navigate through the pages. Here is my code.

  import bb.cascades 1.0
  NavigationPane {}
  ID: head

  {Page}
  content: {container
  ImageView {}

  }
  {To ListView
  dataModel: {XmlDataModel}
  Source: "items.xml".
  }
  listItemComponents:]
  {ListItemComponent}
  type: "header.
  {To header

  Title: ListItemData.title
  subtitles: ListItemData.subtitle
  verticalAlignment: VerticalAlignment.Center
  horizontalAlignment: P

  }
  },
  {ListItemComponent}
  type: "listItem".
  {StandardListItem}
  Title: ListItemData.title
  Description: ListItemData.subtitle
  status: ListItemData.status
  imageSource: ListItemData.imagepath

  }
  }
  ]
  onTriggered: {}
  var selectedItem = dataModel.data (row);
  navigateTo (one)

  }
  }

  }
  }
  attachedObjects:]
  {Page}
  IDdon't
  {Of container
  {Label
  text: 'pineapple Honey Bee ".
  }
  ImageView {}
  imageSource: "asset:///1.jpg."
  verticalAlignment: VerticalAlignment.Center
  horizontalAlignment: P

  }
  }
  }
  ]
  }

  If you want to make a page for each ListView item then I suggest you take a look at the cookbook example that uses dynamic loading to do exactly this.

• Participants cannot view video pods through the mobile application

  My participants indicate that they are unable to watch the videos we play during our demonstrations.  Video pods are supported through the iOS app?  If so, are there specific measures I need to do to make them work for my presence?

  For the videos to work in the mobile application, they must be FLV videos. I know it's against intuitive, but the videos to MP4 will show just as content not supported.

• Cannot get my pictures in the order I want.

  I can't get my photos in the order I want.  I do this:

  (1) select the photos I want in the main file using a color filter. Then, I select the filter to display a selection of photos.

  (2) I rearrange the photos in the order I want by drag-and - drop in the "film" at the bottom of the screen.

  (3) I select the photos newly built for export. If I export to a new file the new photos in the new reveert file to the old order. Strangely, if I have the cursor on the images of the film of the new file, they are numbered in my custom command but physically they were returned back to the order that they were in before I gave up and dragged.

  What should I do on custom order my photos and export them to a new file that will recognize this order? I've done this plenty before but suddenly something goes wrong.

  Thank you

  Craig

  LR by default to capture the time - are you by selecting the command file name in the toolbar?

• When you edit a composition in the browser, click the button is there but does nothing.

  I'm testing a site in my browser edition a publication. I see edit it and click the buttons on the triggers, but the click button does not take me to his bed or a link. Is it because I am trying to edit on my own computer rather than the customer is going in? I need to see how this feature works if I put it to my client to change a slide show or a composition.

  Thank you

  Hello

  Edit on your computer makes no difference. You should be able to change it on your computer. What is the URL of the site?

  Kind regards

  Aish

• Cannot get internet connection through wireless network

  I have a Sony VAIO laptop that came with Vista 32 bit and went from 7 Home Premium 32 bit.  I connect to the internet via my Ethernet via a DSL modem with no problems.  When I try to use the edge Intel 4965AGN wireless to connect to my DLink 655 Wireless N Gigabit router, it appears that it connects to the network, but there is no internet connection.  Both the router and the edge Intel have the latest drivers and the encryption is set on AES, WPA2-Personal.  Some additional information:

  I have desktop computer Dell with a DLink USB WiFi and it connects to the network and gets internet

  I constantly get the message from Windows saying: Windows has detected an IP address conflict with another computer on the network.  I restarted the router several times to no effect.

  In network and sharing Center (of course the troubleshooting network said he found nothing) the network appears as a Public and unidentified and it gives me no option to change it to a home network.

  I tried to connect to other networks public wireless (hotspots) and I can't connect it

  Hello

  Something is wrong with the TCP/IP parameters.

  Autoconfiguration IPv4 address:169.254.1 52.88
  IPv4 subnet mask: 255.255.0.0
  Autoconfiguration IPv4 address: 192.168.0.1
  IPv4 subnet mask: 255.255.255.0
  IPv4 default gateway:

  This 169.254.1 52.88 is the IP by default Windows assigns when there is no DHCP server, this isn't a working IP address.

  The second IP address is the IP address of the Wired card. That is why router conflicted reports.

  Configure the two cards for full Auto obtain IP and DNS.

  Then do a WinSock and TCP/IP updating.

  Type Cmd in the search text box.

  Press Ctrl-Shift-Enter keyboard shortcut to run a command as administrator prompt.  Allow the elevation.

  Type netsh winsock reset at the command prompt and press the Enter key.

  Do the same process to refresh the TCP/IP just replace the command typed with.

  netsh interface ipv4 reset Press enter

  netsh interface ipv6 reset Press enter

  ipconfig/flushdns press Enter

  Restart your computer.

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• Articles in 'Tools' > Options/advanced/network/settings tab are grayed out. I'm trying to clear cache. may also have Firefox do this automatically, but cannot get there. Why the menu options are grayed out?

  Firefox 3.6.17

  (1) you may need to click the background box ("use of manual settings") to activate the manual configuration of the proxy.

  (2) see How to clear Firefox cache.

• Cannot get active document when the user clicks on the document in Adobe FM 2015.

  I am facing the following problem:

  I have a timer in my application that strikes several times after 2 seconds to get the name of the current document (if there is).

  If the user selects text (the click of the mouse down) of the current document in Adobe FM 2015 then the following API call returns 0 (which is false):

  F_ApiGetId (FV_SessionId, FV_SessionId, FP_ActiveDoc)

  Later, if the user leaves the mouse (click of the mouse to the top) then in the next hit of the timer the document name is extracted.

  It seems that the Adobe FM 2015 cannot manage simultaneously the two entries of the user of the application and the API in my application calls.

  Why is this happening?

  It seems that Adobe FrameMaker 2015 cannot handle at the same time user UI events and FDK API calls from external applications.

  When user interacts with the application FM calls API FDK for my failure in the external application with error codes.