CP8 and rest of the setting of the project

Similar Questions

• Is there a way to delete a button object in Captivate to a single slide, if it is set to display for the rest of the project?

  I created my own buttons next and previous, and I showing to the rest of the project. I want to remove the button from my last slide in my project because there is no next slide.

  You can't "delete" it, but you can hide it and / or disable (for a button)

  using the event to enter the slide.

• How to make objects of value to "the rest of the project" persists on the last page?

  In Captivate 5, we have set the calendar for the footer graphic and logo for 'Show for': "the rest of the project."

  These two items appear on each page until the user advances or close the window. However, on the last page of the course, these elements fade. It seems that if the blade is set for 3 seconds, the objects disappear after 3 seconds.

  Is there a way to get these items "rest of project" to continue to display on the last page of the course, the learner will close the window?

  Or does do the last slide time longer, for example, 20 seconds?

  Or should we use slide masters for the footer rather than the option 'rest of slide '?

  Thanks in advance for any ideas or suggestions!

  I don't have CP5. But in CP5.5, to make this work, I would be:

  1. Put these objects on the slide.
  2. Set transition Fade In only. (Transition in the properties panel accordion)
  3. Switch to Filmstrip mode.
  4. Configure each slide to use the master slide.

  I guess that's the way it works in CP5. Give it a try.

• Calendar - rest of the project in Captivate 5.0

  I'm new to Captivate and using 5.0, I have a typical problem, whenever I create any simulation on the last slide I wright "thank you, visit me on ifrance.com.

  After the publication of the simulation when I play the file HTML simulation faints at the end. I want the last slide in the simulation is visible even at the end. It is possible to Captivate 3.0 when I select the text on the last slide > properties > calendar > rest of the project

  Can any one hemp me with this

  Thank you

  Go in Edition > Preferences > project > begin and end. Deselect melted on the last slide.  If you want the final image to remain until the user closed the window, set the action to the end of project to Stop project Option.

• Advanced display of Action for the rest of the project?

  I have a tip action that when you click on the Menu button I did see a list of all pages and when you click on a page, it climbs to her. I have this game to show for the rest of the project, however, I would like to do so on a specific page, the menu button does not appear

  Note This means that button menu is on the timeline of one of the slides, and then is displayed on the other glide but does not appear in the timeline if this isn't a case of a click on the eye hide button

  So, how to hide this button that appear on a specific slide I select

  I can add pictures if necessary thanks

  You can hide all that is displayed for the rest of the project with another event. I mostly use the event drag on enter. ATTENTION: If you are indeed talking about a button, just hide is not enough, you must also disable the button.

• 7 display for the rest of the project"Captivate does not

  I scored two objects - a text caption that contains a user variable and a smart form that I use as a navigation button - "show for the rest of the project.

  These objects appear on the following slides in edit mode, but in preview mode or published, the objects do not exist on the next slide.

  Is this a known bug?

  What is your version number?

  

• Buttons displayed to the rest of the project

  I am trying to replace the PlayBar with my own buttons (some are text buttons and other buttons image), but for some reason, there is no option to view the rest of the project. The only 2 options are: 'specific time' and 'rest of slide '. Am I missing something?

  If you are using a version before 6 this is the sad truth: interactive objects can never be used on blades of masters, or displayed for the rest of the project.

  If you use Captivate 6, there is good news: my personal favorite novelty are used as buttons on Forms. They can be displayed for the rest of the project:

  http://lilybiri.posterous.com/why-i-like-shape-buttons-Captivate-6

  http://lilybiri.posterous.com/toggle-shape-buttons

  http://lilybiri.posterous.com/want-a-button-on-question-slide-in-Captivate

  Lilybiri

• Hide an object displayed for the rest of the project

  I have an item I want to show for almost all of my slides.  If I use the option "Show the rest of the project", what is the best way to hide on a few slides, on that I don't want?

  Hello

  Unfortunately my crystal ball does not for the moment I'll have to ask which version of Captivate you use.

  See you soon... Rick

  Useful and practical links Captivate wish form/Bug report form Certified Adobe Captivate training SorcerStone blog Captivate eBooks

• If I'm working on a project in a free trial of Premiere Elements, and then save the project (do not export it) and open it again in the full version of Premiere Elements, the watermark will be removed?

  If I'm working on a project in a free trial of Premiere Elements, and then save the project (do not export it) and open it again in the full version of Premiere Elements, the watermark will be removed?

  If you have made the timeline or out of a movie from the trial version, it will have this watermark on it.

  Once you have purchased and activated the software, you can remove the watermark by going to the folder directory on your computer where your project files are saved and deleting the folder Adobe Premiere elements preview files.

• Integration of Code FPGA on the rest of the project.

  Hello, thank you for helping me.

  I recently started on the MyRIO, NOR I have the following code to handle a ultrasonic rangefinder:

  

  However, when I try to compile I get the message:

  

  Apparently many of the most common features of Labview can not be used on a FPGA target. However, the code for the Rangefinder is a small part of a larger project in which I have to use such functions, so my main concern is the weather, I'll be able to integrate this code with 'normal' labview FPGA code on the myRIO, if possible, how?

  I would create as for example a 'top' VI which has its own code (showing the waveform graph after the realization of certain mathematical operations on the will appear given by the VI as well as some other stuff).

  Thanks again for helping me.

  Here's the thing with FPGA: you configure real equipment.  Everything must be fixed to the size.  So if you don't have to use an array, you must configure it to be a fixed size (right click in the control to set the size, use the table to initialize or LOOPS containing a fixed number of cycles, and autoindexing).

  As GerdW said, FPGA is not a GUI.  So, you will want to use a DMA FIFO to send your data to waveform until the RT.  You create in the project.

  For some really good information, I recommend that you see the cRIO Developer's Guide.  The myRIO is the exact same platform as a cRIO except that you cannot use the C Series modules.

• can not see Add targets and devices in the Project Explorer

  Hello!

  I think I have a strange question. I have the evaluation version of Labview 2010. I am trying to add my cRIO 9004 to a project. I'm just trying to follow the instructions in the getting started with manual cRIO. It is said, add crio to the project by project root right clicking and selecting NEW > ADD TARGETS AND DEVICES. The problem is I can't see the link to the NEW, but once I click that I see not a link under "add new target or device" appear, instead, I see the dialog box to open a NEW FILE LABVIEW appear. everywhere in distress forum/basic knowledge/support of shooting and get started articles have mentioned project root right click > select NEW > select Add a target or peripheral >, as if she IS supposed TO APPEAR STANDARD in all new projects! But I'm not! I do not understand what Miss me. The version of software that I have are below:

  the cRio:

  OR VISA 5.0

  NEITHER RIO 3.0
  RT LV 8.6

  and he allied himself with what I installed on my host.

  I can communicate with the device of cRIO times using MAX as well as ping at the windows command prompt command.

  Any help would be great!

  Thank you!

  Rajesh

  After you have installed the evaluation version of LV 2010, you reinstall all of the other drivers, as for the cRIO?

• Missing labels and buttons in the projects

  Hey,.

  I've recently upgraded to the licensed version of Captivate after using a trial - however, it seems that a number of buttons, the button text and the text of the label just disappeared without reason that I see. Creating labels and new buttons fails to produce anything to the screen in the current project or a new project.

  Everyone knows this or have any ideas for me to try?

  Thank you

  Richard

  Another thing to try is to close all the Captivate projects down and clear the cache by clicking on the button to edit > Preferences > General. Then restart your PC.

  Sometimes, I saw my buttons disappear in the projects and just clear the cache and restart like that fixed it.

• Access to the intranet and then continue the project on the back

  Captivate v5.5

  I created a project which will be published on our intranet.

  Throughout the project, I want learners to be able to access certain documents which can be found on our Intranet.

  I understand that it is possible to create a button with the action open URL that leads to the page where the document is.

  My questions are regarding his return to the project after you open the intranet page via the URL action.

  1. How can ensure me that the project stops during the time they are on the intranet?

  2. How can I get the project from where they are, once they return to the project?

  Thanks in advance,

  Noel

  Christmas salvation

  Normally a Button object interrupts the slide as part of its basic function. However, you can disable this feature. In addition, if slides reading time is really long and the point of pause button is staged a long way in the slide, the user can click the button before the break point has been reached. In these cases, you would still hear the game with slide (assuming that there is no audio).

  The issue here is to ask if the blade is really to continue to play or are you just hear the audio and assuming that it moves only play audio? You can just hear audio slide play while button has the slide paused.

  Captivate 6, it seems a few options to make a pause or stop audio when clicked. I think that these are the new features of version 6. So if you use an earlier version, it may not be a way to cause the audio to pause.

  See you soon... Rick

  Useful and practical links Captivate wish form/Bug report form Certified Adobe Captivate training SorcerStone blog Captivate eBooks

• Location and Applications update the project in sight

  Hi all

  I think that I'm getting the hang of thinapp. I have a few questions

  (1) I have a virtual machine with thinapp installed on it and took a snapshot and named 'own os. What I want to do is to store the catch on a network share, and that seems to work, but it fails when I try to build the package. If I drag snapshot.exe on file build.bat on the network share, it will then build the package. I am very well do it this way, but don't know why I can't just run build.bat on its own.

  (2) how upgrading to new versions of the applications that the user loses its data? I use the Thinapp repository built into VMWare View to deploy MSI files. I'll give an example to help clarify my question. I use Firefox in my example, even if I don't try Firefox thinapp.

  If I was in thinapp firefox version 8 (name of the inventory of Firefox 8) and set it to write the copy, so that the user saves the internet Favorites, be saved to the sandbox... good, now Firefox 9 comes out and I want my users to use Firefox 9... What is the best way to upgrade? I know I can just create a firefox thinapp 9 and add it to my deposit, but how to spend it correctly, so the users do not lose their favorites that are saved in the sandbox of Firefox 8?

  Once again, in the real world, I wouldn't send Favorites to a sandbox, but I'm just using this as an example... My question relates to any application

  Thank you

  Mike

  Mike,

  1. What is the ThinApp version?

  2. Please see the post newspaper of update of an application (Firefox) with the use of MSI.

  http://blogs.VMware.com/ThinApp/2010/04/upgrade-a-deployed-ThinApp-package-with-the-help-of-MSI.html

  To record data of sandbox, please use the same name of sandbox for the version of old and new.

• Boxes click is available for the rest of the project option

  I'm doing that I'm not missing something. It seems that they are only the precise time and the rest of slide, can someone please confirm?

  Thank you
  Dan

  You're right Daniel. You can use the Smartshapes place. (Unless you post on HTML5, like smartshape buttons in HTML5 has problems.)

  Anthony