CPU is only five, but six main showing why

Similar Questions

• My Apple TV is only to play a sound on my iPad but will not show the film?

  My Apple TV is only to play a sound on my iPad but will not show the film?

  Welcome to the Jennifer Apple community.

  Some content providers don't block the video portion working with AirPlay, have you checked to see if AirPlay is supported by this provider.

  If it is supported

  these steps, check to see if things work after each step if necessary, before you try the next.

  1. Check AirPlay is on the Apple TV (turn market if it already is)
  2. Check that both devices are on the same network (settings > Wifi on the mobile device and the settings > General > network, on the Apple TV).
  3. Restart the Apple TV (settings > general > restart).
  4. Restart the Apple TV by removing ALL cables for 30 seconds.
  5. Restart your router. (Also try to remove the power cord for at least 30 seconds)
  6. Restart your mobile device.

  If you're still having problems, the following article can help you.

  Troubleshooting AirPlay

  Troubleshooting connections and Wi - Fi networks

  Recommended Wi - Fi settings

  WiFi Diagnostic Software (for Mac users)

  You will also find help on this page, where I have collected some of the more unusual solutions for network problems.

  When you make adjustments to your network for better optimization, you can find some of the points mentioned onthis page useful.

• I now have the complete Adobe CC license, but I mainly use only CC Photoshop and Lightroom CC. How can I get my driver's license?

  I now have the complete Adobe CC license, but I mainly use only CC Photoshop and Lightroom CC. How can I place my full CC to the version of photographers CC license?

  I don't see in my Adobe account opportunities to make changes.

  https://helpx.Adobe.com/creative-cloud/help/cancel-membership.html

  To the link below, click on the still need help? option in the blue box below and choose the option to chat or by phone...
  Make sure that you are logged on the Adobe site, having cookies enabled, clearing your cookie cache.  If he continues to not try to use a different browser.

  https://helpx.Adobe.com/contact.html?step=CCSN_membership-account-payment_cancel-your-memb ership_stillNeedHelp

  Creative cloud plans

  https://creative.Adobe.com/plans

• Site Web of Muse shows only shortened but the file disappeared!

  Site Web of Muse shows only shortened but the file disappeared!

  Entirely built woman on its website and now it has completely disappeared, it is on a PC

  Hello

  Please try searching for the file, the computer if you have changed the location of the file to disk/drive/folder to others. You made the .muse file backup. Muse of Adobe will not be able to recover lost files unfortunately.

  Let me know if you have any question.

• Windows Movie Maker is important video imcompletely (only five seconds to hour long video)

  I tried to import this hour long video in windows movie maker, and the result is that only five seconds of the video is imported. I tried over and over again, but still five seconds of the video is imported. I have searched the Internet for answers, but impossible to find a single solution to all but one of this forum that leads to a page for the Director in windows vista, which certainly does not help. Any help on this situation would be greatly appreciated. If it helps, I am running Service Pack 2 for Windows XP Home 32-bit Edition.

  The extension is (.mpg). I've just updated to Service Pack 3, but the problem is still persistent... Right, the Windows Movie Maker version is 5.1, if it helps.

  =====================================
  The problem is the file format. If you convert the MPG file
  in WMV format, you can have better results.

  Several formats are apparently compatible with
  Movie Maker, but the most reliable choices are:

  Photos - bmp
  Video - wmv or dv - avi
  Music - wma, wav, wmv

  The following freeware can convert:

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  Format Factory
  http://www.pcfreetime.com/
  (FWIW... installation..., you can uncheck
  ('all' boxes on the last screen)

  First... after the download and installation of Format
  Factory... you can open the program and
  left click on the toolbar, the "Option" button and
  "Select an output folder to" / apply / OK.
  (this is where you find your files after they)
  are converted)

  Drag and drop your video clips on the main screen...

  Select "all to WMV" / OK...

  Click on... Beginning... in the toolbar...

  That should do it...

  Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• Only half of the icons showing on personal bar

  Only half of the icons showing on the bookmarks toolbar, but when I go in the toolbar custom, then click on 'Done' they appeared all over again.

  Thank you... I downloaded the latest edition, and that seems to have solved the problem.

• When I download something at this time, it displays the logo of microsoft word, but does not show the picture logo .so I can do now

  When I download an image with Firefox than time, it shows only the Microsoft word logo but do not show the logo of the photo, so when I open the download file it show only the Microsoft word file. and I don't see my folder. but now what can I do?...

  What file extension, these files get when save you them?

  If they do not have a file extension valid for a picture as a .jpg or .png then try to rename the files and give them an extension of .jpg file to see if that helps.
  
  If Windows hides the file extension and then use quotes ("image.jpg") around the name.
  
  You can check the type of file using the context menu > properties.

• Portege M200 - CPU runs only at 598 MHz! Basic BACK Toshiba Service tool

  Portege M200 - CPU runs only at 600 MHz

  I have a Portege M200 with a Dothan Pentium M 725 supposed to run at 1.6 ghz, but posts a 598 Mhz
  frequency. I updated the bios to 1.8.

  I read in a previous post "locked"...:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=63390

  .. He's supposed to be a base of BACK of Toshiba utility to fix the problem. .
  It is said that this is not a Bios problem...

  Can someone direct me to this utility?

  Thank you!

  Gary

  The answer is here... thanks all and who is responsible for:

  http://forums.Toshiba.com/T5/Qosmio-laptops/598-MHz/TD-p/194566

  The key is a utility called 'pom200t1 '.

  You will need the following.

  A floppy disk or if you do not have an external floppy drive, or if you are common sense to be able to boot a file from a CD player.
  You must also WinImage, as all files that you download come as .ima files
  Download pom200t1 - V1.5.zip and pom200t1.zip (if if doesn't work either).

  You can find them here:

  http://www.stormpaintball.com/Toshiba/pm765.bin (this one is a ditch last attempt).
  Then follow the instructions on the site I posted before:

  Symptom: CPU remains constantly 598 MHz.

  * Process: *.

  (1) boot in the BIOS. (Press "Esc" during the boot process, before the loading of the operating system, but after having entered your password, if you use the startup password protection).

  2) look under 'Other' category.

  (3) if the motherboard does not have enough information about the CPU, the category 'Dynamic CPU frequency Mode' appear on (you won't see it).

  If the laptop is in this state that he won't ever faster than 598 Mhz until you perform the following procedure.
  Note: Although this utility said it's for a Toshiba Portege M200, the particular difficulty you need may work on other Toshiba laptops.
  He has worked on 3 different Toshiba Satellite Pro M15 S405s, but * USE at YOUR OWN RISK *.

  (1) start Windows and create the startup disk in the pom200t1.exe file.

  (2) boot from the diskette you just made.

  (3) in the menu, select the initial repair option 2 "set config".

  (4) in the following menu, select option 1 'Initial cofiguration"(misspelled)

  (5) after a few seconds, you should see "Writing a file is over!" and the laptop restarts automatically without asking for confirmation.

  (6) when restarting the laptop go back into the BIOS and look under 'Other' category. You should now see the "dynamic CPU frequency Mode". Make sure it is set to "Dynamically switchable" for the CPU limitation.

  7) restart Windows and make sure that the CPU can throttle in normal conditions. The Intel SpeedStep technology icon should now be in the systray. Go to the Toshiba power management / Power Saver Properties and update all of your methods to save power to use technology SpeedStep that you prefer (fixed or automatic) and mount all caps speed processor, or you can go above 798 MHz because cursors will always be to their previous settings (4 or less), while they can now go up to 7. Let me know how you go.
  I have fixed the CPU now just need to find out why my fan only works when I activate it manually!

• Re: Portege M200 - CPU runs only at 600 MHz

  Hello

  I bought a Dothan M755 2 GHZ processor for my M200. I installed the CPU with no problems, but now I have a: this CPU only runs at 600 MHZ. It seems to me that it works on the power saving mode, but I have the tablet on power supply.

  I tried an option in the bios to health, but there is nothing. My version is (seen in the top right corner in the bios): "ACPI BIOS Version 1.80"

  My OS is Windows 7 Prof

  Y at - it a possibility (update of the BIOS? etc.) to fix?

  Thanks for your support!

  Hey,.

  That s the speed step function and the kicks in the multiplier 5 x to save energy.

  Check the BIOS if you can find the setting on the speed step and turn it off. If you do not have such an option in the BIOS choose another plan and the value 100% minimum processor state. It will always run at 2.0 GHz.

  Check this box!

• I created a photo album on my iMac with 241 photos but my iPhone shows that 220 photos. I deleted the album and created a second time but got the same result.

  Hi - I created a photo album on my iMac with 241 photos in it, but my iPhone shows that 220 photos from the same album. I've deleted the album and created a second time, but got the same result, only 220 photos appear. I 2.9 GB available in iCloud, so it can't be the issue.

  Al

  Try the settings/iCloud and remove the synchronization. Wait a few minutes and then resynchronize.

  Have you tried the signature to iCloud and then reconnect?

• CPU works only 30-40% on Satellite A200

  On my Toshiba Satellite A200-10w psaece I was running like a lot of antivirus programs, music player, web browser, photo programs as well as the transformer works only 30-40%.

  Someone knows why? It's a solution?

  I have all the updated drivers, include the bios.

  Thank you

  Are you sure you knew what you're talking about?
  I think you don t know how a CPU Intel Core 2 Duo T7200(2.0GHz) work.

  The fact is that this processor supports Enhanced Intel SpeedStep technology and this is the main reason why you CPU doesn t ALWAYS better performance running.

  Maybe you should check the Intel page for more details and for more information on Enhanced Intel SpeedStep Technology, if this feature is not known to you!

  Welcome mate

• I have Outlook Express 6. When I want to fix anything, the attachment box appears in a size... with only 6-8 files/folders showing both. How to adjust the size of the box?

  I have Outlook Express 6. When I want to fix anything, the attachment box appears in a small... with only 6-8 files/folders showing both.  How to adjust the size of the box?  There is no minimize mazimize click or angle to slide.  It used to be adjustable, but no more.  Help?

  Like when you open a new message window and either click the button attach or insert | Attachment? I don't ever remember being resizable or a very large box. Change the display of list will give you a bit more, but that's all.

• Media Player... Whenever I try to play a video, I get only audio but no video

  Whenever I try to play a video, I get only audio but no video

  Can someone help me

  Hi Pedro Gonzalez h,.

  Thank you for writing to Microsoft Communities.

  I understand how it could be frustrating when things do not work as expected. Please, I beg you, don't worry I'll try my best to resolve the issue.

  Until we start troubleshooting on this issue please provides us with additional information by answering a few questions below, this will help us better solutions to the problems.

  1. What is the accurate and complete error message you get when you try to run?
  2 did you do any change to the computer before the show?

  Method 1
  I suggest you to run the fixit from the following link:

  Solve the problems of Windows Media Player video and other media or library
  http://support.Microsoft.com/mats/windows_media_player_diagnostic/

  Method 2
  I suggest you try the steps from the following link:

  You receive a codec error message or play audio but video does not play when you play media files in Windows Media Player 11
  http://support.Microsoft.com/kb/926373

  Hope the helps of information. If you need help, please reply. We will be happy to help you.

• I just download free Adobe, but is to show your train arrived at expiration

  I just download free Adobe, but is to show your train arrived at expiration

  Hi Umam12733198,

  I hope that the identification of email that you use for Adobe trial has never been used before, also you can have Adobe trials only once on a machine.

  For more information, you can Contact Customer Care.

• inporting photos taken on my new nikon lens mount 150-600mm tamron on body 7100, shows photos in lightroom inport but not inport them why

  I have a new 150-600mm nikon tamron fits, using nikon body d 7100

  took some photos this morning to try it

  went to inport to lightroom, shows as well as the photos but not inport

  Why what can I do about it

  Help

  Marc beard

  tried inporting anouther and card camera, the same thing happened

  so not the camera or the sd card as I thought, problem with lightroom

  only the update of lightroom for 5; 5 some days ago

  1 before inport since ok

  I can inport by file photo on computr well

  that I don't want

  I have window 7

  tried inpoting via card reader and also directly into the machine through front slot

  not very good on computer

  so that you as simple as possible to unmask

  Thanks for your help