CPU/motherboard

Similar Questions

• I need to upgrade the CPU, motherboard and RAM in my machine. Which will impact my Activation of Windows genuine?

  I need to upgrade the CPU, motherboard and Ram in my machine. Which will impact my Activation of Windows genuine?

  original title: can I put my machine after GWA?

  It's a Genuine Windows Kit which is what you would be considered a retail license. In other words, that it is transferable to another computer, which means you have the right to support directly from Microsoft.

• Satellite Pro 4600: Question about upgrade RAM, CPU, motherboard

  Hello

  I have a SP4600 and because I love this machine, I want to give him the chance to stay with me - but unfortunately, it will only work by increasing its performance...

  Is anyone here has made some experiences in upgrading a SP4600 more than 512 MB of RAM?
  I know that this machine uses PC100 SD - RAM that is available up to 256 MB.
  But someone has tried successfully to put in PC133 memory? And if so, to were the limit?

  And more: what about the upgrade of the rest, for example, the CPU or the whole motherboard?
  Currently, his heart beats with 700 Mhz (Celeron). Would it be as easy as just another graft?
  Or would it be easier to exchange the whole motherboard?
  I've never done anything like this before and I'm not sure how the rest of the system can react on these interventions, in particular because the we-board-video and sound on board...

  I would be delighted if someone could give me some positive feedback on these issues...

  Hello

  You can only use the memory 100 Mhz modules because the FSB is limited to 100 MHz.
  If you use 133 Mhz modules, they will work only at 100 Mhz.

  You can upgrade the satellite Pro 4600 until 512 MB (2x256MB)
  http://www.orcalogic.co.UK/ASP/ProdType.asp?ProdType=28447&ft=m&St=3

  Other devices such as the CPU or GPU are not extensible and the motherboard may be replaced only with the same motherboard

  Finally, you should know that the laptop technology is a little different and you can't compare it with any desktop computer. You can update some parts such as the memory or HARD drive, but that s all the

• CPU - motherboard compatibility

  Hello. I have a DM4-1160US and I'm looking to update for the processor and I wanted to see which processors may be compatible, in order to determine if the update is worth. Here is my motherboard and CPU plug current:

  Manufacturer Hewlett-Packard
  146 a model
  Version 58.28
  Serial number PBLKL00QEZU1P3
  
  North Bridge Intel Havendale/Clarkdale Host Bridge revision 02
  South Bridge Intel HM55 revision 02
  
  Processor Intel (r) Core i5 CPU M 450 @ 2.40 GHz
  CPU Socket Socket LGA 1156

  I would like to know if you can help or need more information.

  Thank you!

  Jason

  Yes, the upgrade of processor is really feasible in your laptop - which is not the case, usually, but if this cost is ridiculously high, I'd go for newer towers equipped processors Haswell or Ivybridge 3rd or 4th gen.

• ERROR unsupported CPU, motherboard s5610f H-apricot-RS780L-Μatx, AMD Phenom X 4 965 hdz965fbgmbox

  I have a slimline with card s5610f mother H-apricot-RS780L-Μatx, athlong X 2 250 3.00 GHz.

  BIOS Version 6.05 07/09/2010

  Basic version 08.00.16

  The HP Web site says I can update

  AMD Phenom II X 4 9xx /9xxe/8xx Quad-Core (core Deneb)

  So I tried AMD Phenom X 4 965 hdz965fbgmbox.

  As soon as voltage, the first message I get is "ERROR unsupported CPU...". The PC stops in 10 seconds.

  You have any suggestions.

  By Newegg.com sales information for AMD Phenom II X 4 965 Black Edition (HDZ965FBGMBOX), the power is 125 watts. As 125 watts is more than 95 watts max TDP of the motherboard, the AMD Phenom II X 4 965 Black Edition is not compatible with the card mother H-apricot-RS780L-Μatx.

• How can I change the CPU, motherboard and upgraded to Windows 7 while keeping the old HD and all data on hard drive?

  I am running a Pentium Q9300 with Windows Vista. I have change my mother and put card at level of CPU of AMD Phenom II X 4 965. I bought a new copy of Windows 7. I need to update all those things while maintaining the old hard drive. Well, I don't know how to do it without other wipe the HD, fitness with an upgrade of the OS, or a link is not my new Windows 7 to my old hardware configuration. I need to keep all programs, files, folders, and data I have on the hard drive.

  How can I do all three and the link to my new Windows 7 for my new hardware?

  Hello

  You can not do

  the old hard disk contains the drivers for the motherboard that is old and in all likelihood will not start when it is installed with the new motherboard

  a clean install is normally required when changing motherboards

  __________________________________________________________

  and I think that you should also read this on the granting of licences and motherboards:

  If you have a license to OEM preinstalled, DELL, HP, etc any update at the Board level or changes must be done jointly with the computer manufacturer

  an OEM license is linked to the original tho hardware it is installed on this computer life

  When the computer dies the license dies with him, unless the manufacturer is willing to help you

  If you have a retail license and reactivation problems:

  1. click on start and in the search for box type: slui.exe 4

  2. press enter on your keyboard

  3. Select your country.

  4. take the phone activation option and brace yourself for a real person instead of the automatic fast process

  ·                        When you do the phone activation process hang to a real person explain to, instead of the following prompts for automatic scenario

  -------------------------------------------------------------------------------------------------

  How to find a phone number for a Microsoft Product Activation Center

  http://support.Microsoft.com/kb/950929

• After reinstallation of CPU, motherboard, and Ram the Windows 7 product key is not valid

  recently purchased and installed a new CPU card mother and Ram, in doing so, I had to re - install Windows 7, now is telling my My Code is not valid. What should I do?

  If your license is OEM then it cannot be transferred to a different motherboard. (there is due to the default exception)

  To analyze and solve problems for Activation and Validation, we need to see a full copy of the diagnostic report produced by the MGADiag tool (download and save to the desktop - http://go.microsoft.com/fwlink/?linkid=52012 )

  Once downloaded, run the tool.

  Click on the button continue, after a short time, continue button will change to a copy button.

  Click the copy button in the tool (ignore the error at this stage) and then paste (with r-click and paste or Ctrl + V) in your message. (please do not change the report.)

  Please indicate the version and edition of windows from your COA. do not specify the product key from the COA.

• What is the recommended RAM, CPU + motherboard to run as meny I can VM?

  Hi, I need to run a large number of copies of the virtual machine, I now have a run and when I try to run another pc becomes slow

  I want to buy a new PC, is there any configuration, I need? or just buy a lot of ram

  Thank you

  But if you're under VM workstation already why would you use WIndows XP MOde, which effectively uses MS Virtual PC to run a virtual XP Machine? Just use VMworkstation to run all your virtual machines. Its a better product.

• Update CPU and or motherboard

  Hi, I am looking for help! I expect download new BF1 game when it came out, but after checking my online system, it turns out that my CPU does not meet the minimum requirements I have a

  Intel Core i7 CPU 920 @ 2.67GHz

  It says the minimum just a Core i5 6600 k

  where can I find the brand and model of the motherboard to see if I can switch the CPU to or if I need to update the motherboard which one to get that would fit

  It's an Alienware Aurora R1 2009 if you need more information made me know what to do and where I find

  Thank you!!

  Your Gen1 Intel i7 9xx CPU is a socket 1366 X 58 chipset Nehalem (Bloomfield); motherboard is micro-ATX / u - ATX form factor (9.6x9.6") made for Aware by model MSI (MIcro Star int.) MS - 7591. It probably can be upgraded to an i7 975 x 4 strands or 980 / maybe 990 x 6 hearts as the first choice

  Intel 6th, Gen is a chipset socket 1151 Z170 Skylake, list of the i5s here (& sky i7s prior link)

  

  Here we see an Asus Maximus Gene VIII Z170 6700 k inside the Aurora R4 i7

  This picture was passed to me by a member of the forum, which has an admirable skills in building computers, & the effort required to remove old & replace with new & do so properly & without prejudice for components is important or can feel important, based on your skill level.

  Front wiring not necessary no change (plug & play) but the MIO Board turned out not to be able to run versions of software CmndCntr & therefore version 2.8.11 was replaced, on Windows7 & works.

  Because of their catch of CPU, motherboard on R1 plateau (attaches the metal plate, the motherboard to & who live in the wall case) is different from that of the plateau of R4; If you remove your motherboard to graduate, you will find a black, liquid cooling back plate plastic bolted on the set; its four candlesticks bolts (in the model of bolt single socket 1366) are "" bumps, which may or may not affect the installation of a new plate, say for socket 1151 (your old black plastic plate is removed from the status bar, the new attached to the back of the motherboard itself and, if all goes well, the motherboard bolt on his plate without problem). You can run the Aurora R1 motherboard Exchange / upgrade as through bing search term / google where it may be possible to find out about a dozen or less trade / newspapers, construction certainly search for "Mother Aurora" here in this forum, you can post on Alien Arena, sift in the subforum AlienOwners Aurora & send a friend request to Spook who has experience with swaps R2 & R4 & may have advice, since I have no time to devote to your thread after posting this little help, so good luck

  • My Modded Aurora R3
  • Prevent having the function correctly on Rampage IV Gene R4
  • Asus Haswell Z87 success

• Satellite M70 - la motherboard will support 800 RAM frequency?

  OK, here's my problem. I want to upgrade my laptop computer, the memory of s.

  The stick of RAM available alone, s speed DDR2 800. Can it work with my motherboard. 533 or 667 is not available. It's Toshiba satellite M 70.
  I downloaded CPU, motherboard and info current memory of SIW.

  http://rapidshare.com/files/178214230/mem.zip

  Thank you

  Sorry, buddy, but I think you have the wrong information. Satellite M70 can handle with max 2 GB of RAM and you can use 2 X DDR2 400/533 1 GB with PA3411U-1M1G part number

  Have you checked on the compatible modules in page Kingston?

• I need to sell an old brand cpu/mobo with XP home can it be re-written by someone else? If this rite throw on that one please?

  Hello to all who read this and you can contibute. My dilemma is, Windows XP Home Ed can be used by someone other than me when its locked to a certain CPU/motherboard? And it can be recorded/re-recorded to someone else than me? If I sold it, and they used the same CPU/MoBo but different hard drive? I have all the recovery discs w/windows and all apps on them. Processor is an Intel P4 2.53, MoBo has these # s above, P4-S533-VX, and it is a Sony Vaio desk end 2002 (yes I know it's old). Just some FYI. I really need to make a little money now that Christmas is around the corner & sell this thing as soon as POSSIBLE! Anyway any help would be GREATLY appreciated!

  Registration is optional and has no real meaning.
  If you sell your PC and all the recovery disks, while the buyer is the owner of the license
  Change / pose a new hard drive has no impact on license

• Upgrading from Windows Vista Home Premium at 8 - CPU does not support NX

  Hello

  I have Vista Home Premium (very probably OEM as it came with the PC) on a PC and I bought the upgrade license to Windows 8 Pro.
  I understand that it is in terms of the license transition, but here is my problem:
  The CPU does not support NX (and for sure there is no setting in the BIOS for this).
  So I can't move to 8.
  To replace the CPU, I need to replace the motherboard.
  If I replace the motherboard my understanding is I'm losing the license because it OEM.
  So, in reality, I can't switch to Win 8.
  The license, I bought said that I can pass any system running XP, Vista, Win 7 to 8 Win.
  It does not distinguish between older versions of Windows OEM and retail versions.
  For me, it's a huge conflict.
  So the question is:
  Can I change the CPU + motherboard to earn 8? or not?
  Thank you
  It has been some time but I finally had the time to do the upgrade (hardware + software).
  For history and for others who could come on this post with a similar question and be discouraged by responses like this:
  I contacted the technical support of MS and they confirmed that I had a Windows 8 Pro upgrade license and after upgrading my license would Win 8 Pro full-detail (what you want to call it). Essentially, after upgrade, I can reinstall any other motherboard. Of course you can only use a license on a machine at one time.
  (Of course your upgrade license type may be different to mine, so you should check they type of license)
  In any case, what is more interesting, it of that I got the confirmation that I can do a clean install and activate my upgrade license. Not only that, but they recommended the installation of Vista should not be present when installing on 8 to win. I was very skeptical and I asked for an account of the cat to be on the right side. They assured me that the support had made several times and is not a problem.
  And so, I do a clean install on the new motherboard (and a new player) and activated windows 8 with no problems at all.
  It seems very stupid that you can change the motherboard after the upgrade, but could not make the move and the Windows update at the same time. Fortunately, it is not the case.
  To me, it seems that the MS are aware that in you to go from XP (soon), they should also use the materials for the upgrade.

• Install vista on a new motherboard

  Hello, I'm going to install a new cpu/motherboard in a few days, but I bought vista service sp1 microsoft digital locker that is now gone, but I never had the chance to make a dvd of it. Is - this from there anyway I did not reinstall windows when I put in the new motherboard? If I have to reinstall I can get a replacement cd or make my own? I have my product id, one who is under the properties of my computer, but it doesn't have the key number 25 just an id number 20. Please help me.

  If you borrow a good Microsoft Vista DVD (not Dell, HP, etc).
  A good Vista DVD contains all versions of Vista.
  The product key determines which version of Vista is installed.

  There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

  If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  http://support.Microsoft.com/default.aspx/KB/918884

  MS advice on the conduct of clean install.

  http://www.theeldergeekvista.com/vista_clean_installation.htm

  A tutorial on the use of a clean install

  http://www.winsupersite.com/showcase/winvista_install_03.asp

  Super Guide Windows Vista Installation

  After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

  Save all data, because it will be lost during a clean installation.

  See you soon.

  Mick Murphy - Microsoft partner

• CPU is dead now, I need to install Photoshop and lightroom on a laptop?

  I have photoshop and lightroom install on a laptop and a desktop through the creative cloud. Last week my laptop had a failure or a failure of the CPU motherboard. Anyway its dead. I can get my pictures on the hard drive, but now I want to move the photoshop and lightroom for my laptop to marry while I decide what to do on a new machine. After I bought a new machine then I will suggest two programs to it. My question is how can I move my subscription for a new machine because the old is dead?

  According to my understanding, you only need to install the cloud on the new machine and sign in using your account id/code.  This should close autonatically of other activations you have.  You can then connect to the desktop again.

• Reinstall/download CS4 on new processor (old CPU crashed - have hard drive)

  CS4 on old CPU - motherboard came. I can't find the disk and box w/serial number. I have my old hard drive.

  Any ideas how redownload/reinstall CS4 without this info?

  Your only hope is probably by contacting the Support from Adobe directly through chat or by phone to see if they can help you, but don't be surprised if they refuse to give you a serial number... There is only so much that can be done to prove your legitimacy as the owner.

  Here is a link to a page with options to help make contact:

  http://www.Adobe.com/support/download-install/supportinfo/