Initial value of binding NumericTextBoxDouble

Similar Questions

• do the initial value of test data

  Hello world

  I'm testing the scale, and as the firstl value which sensors shows me is not 0, I need my first initial value.

  The thing is I use digital controller and I just subtract the first value of my data to see the actual data.

  The thing is I want to do this program automatically, I mean when I press the button to start the program automatically measure the first data, save it and use it as initial data.

  do you have an idea, suggestion? Thank you

  See below.

  

• How to assign an initial value by using the driaver or traditional?

  Hi all

  the question is quite simple: I use PCI - 6014 with driver OR traditional DAQ (so far). I have a device connected to a set of things to do in order to provide for a grouping, which selects the operating mode. As soon as the device is triggered and I initialize the DIO, I attribute the initial values BD. The problem is that it takes a while (approx. 15 ms) to do, and during this time (between the initialization of the devices and the initial assignment) the combination of output is one level 0, which is highly undesirable because of the specificity of the device. Is it possible to "encode" the initial values of the things to do, so that, as soon as data is turned on, and the line is declared as DO, it automatically receives the pre-defined value?

  Thank you in advance,

  Mike

  Have you read the card? The answer is no.

• reset all outputs the initial values

  Hello

  in our case, a project VeriStand is running on a machine RT with cRIO-I/O.

  Is there a possibility to reset all outputs to the initial value, while the project is running? (I don't want to restart the system in real time or deploy the project to new because who consumes too much time).

  Hello

  You can create an alarm that calls a reset procedure. The alarm can be mapped on a Boolean button in the workspace. Or you can call a Sequenze RT to reset your values.

  Best regards

  Philippe

• How changel initial value to a global setting

  Hi all

  Thanks for your time in advance.

  I've changed the initial value of the global setting from 0 to 4, and then saved the VI. However, whenever I have opened the file in VI, the initial value is returned to zero. Any ideas?

  Thank you.

  Before saving, try selecting "change-> use current default values.

• PasswordEditField with no label and no initial value

  I have a custom password field (PasswordEditField extension) and I wonder what would be the correct values to pass to the first two arguments of the constructor to get no labels and no initial value, but still be able to set the style bit.  Should they be "null" or just an empty string ("").  For example:

  public final class PasswordField extends PasswordEditField {
  
      private static final int MAX_CHARS = 255;
  
      public PasswordField(long style) {
          super(null, null, MAX_CHARS, style);
          // ...or...
          super("", "", MAX_CHARS, style);
      }
  
  }
  

  The two seem to work the same, I was wondering which is more appropriate.  Don't see anything in the documentation to pass null.

  empty string

• Initial value of the article display

  Hello

  Forms 6i,

  I use some display items with an original value (of the text), they are not db-objects, they are on a control block,

  the problem is when I run the form, the text (initial value) are missing, I don't know why.

  But if I moved the display settings to the db block I, it displays the text in this regard?

  Thank you

  Because block display of the element is not active.  the block has probably only display point or like him.  any block must have at least one navigable element.

  Add the element of text on the same block, you will see that the value of the element display will appear.

  Best regards

  Celal

  If the answer helps you, please tick the right answer or helpful response.

• How to set the initial value programmatically in af:selectOneChoice

  Hi all

  How to set the initial value programmatically in af:selectOneChoice

  filled with view object instance, but I want to show the value initial programmactically

  This can help you: Re: how to set the default value of the component selectOneChoice in ADF

  and the default af:selectOneChoice programmatically from backing bean

• Use case: initial value in the filter Table

  Hello world

  I've been struggling with this problem and I'm about to give up! :-(

  My requirement is to have a table with filters, which must have an initial value, which must be visible by users as soon as it connects, then it can be default value for the filter change or deleted.

  I use Jdev 12 c and jspx pages and unlimited workflow.

  
  Please help me with all of the recommendations.

  Kind regards

  Jose.

  Hello

  Finally, I crushed filterModel of the table in this way, and it works!

  public FilterableQueryDescriptor getFilterModel() {}

  Map httpSessionMap = ADFContext.getCurrent () .getSessionScope ();

  String freshLogin = (String) httpSessionMap.get ("freshLogin");

  FacesCtrlSearchBinding = sbinding

  (FacesCtrlSearchBinding) JSFUtils.resolveExpression ("#{bindings.}");

  QPF FilterableQueryDescriptor = sbinding.getQueryDescriptor ((FilterableQueryDescriptor));

  If (freshLogin == null) {}

  Get the initial value

  BindingContext bctx = BindingContext.getCurrent ();

  BindingContainer links = bctx.getCurrentBindingsEntry ();

  AttributeBinding attBinding = (AttributeBinding) bindings.get ("");

  String userEntity = (String) attBinding.getInputValue ();

  Assing as a criterion

  Map fcMap = fqd.getFilterCriteria ();

  fcMap.put ("", userEntity);

  Run the query

  sbinding.processQuery (new QueryEvent (getProjectsTable (), QPF));

  Avoid the next run

  httpSessionMap.put ("freshLogin", "false");

  }

  return the QPF;

  }

  Thank you very much for you help!

• Sequence created in anon PL/SQL, lack of initial value

  If I create a sequence in an anonymous PL/SQL block, with immediate execution, and then perform a select nextval from this sequence outside of the block, its initial value is missing.

  Easily reproducible here:

  create table tab_a (col_a number 4 not null);

  Start
  run immediately ' create the sequence seq_a with increment 47 1';
  end;
  /

  insert into tab_a seq_a.nextval selection of double;

  Select * from tab_a;

  This is a very simplified representation of the circumstance in which I found myself, but it reproduces the effect I see.

  If I drop the sequence to truncate the table and run the statements (except the first) once again, it works as expected. If I delete the table and rerun all statements, she again returns the wrong answer.

  I don't need a workaround solution, the issue has been addressed a long time ago, but I would like to know WHY this happens. from 47 of the sequence can be any number, it is there just to show the question when 48 is inserted into the table. The latter could be in any table and can be on any table rather than double.

  Oracle EE 11.2.0.1.0 on node OE Linux, RAC and single.

  TIA.

  It could be like, in oracle 11.2 (GR 11, 2) there is a new feature 'deferred_segment_creation' = true (maybe in your case). Then sequence is get initialized before inserting the 1 record to the table because of the creation of segment.

  Change both the default value FALSE check after that. It can solve your case!

  Reference:--

  http://www.dbsnaps.com/Oracle/Oracle-deferred-segment-creation/

  It has already been notified in the previous discussions.

  Thank you!

• Initial value of the checkbox field is not affected.

  Hello
  
  I have a custom form with 2 fields, which is a check box which is below the values
  Value when checked: 1
  Value when disabled: 0
  Mapping of other values box: checked
  
  and the other is a text field. Please insert text fields field data into the table db that are checked.
  
  Iof displayed the Web file number is 10.
  
  
  I use the code in the trigger of the COMMIT BUTTON to save data in the table below. that is, I'm insertion of the value of the text field in table for the check box that is checked
  
  GO_BLOCK ("CHANNELS");
  premier_enregistrement;
  LOOP
  IF: CHANNELS. CHECK = 1 THEN
  INSERT into...
  WHEN THE OUTPUT: SYSTEM. LAST_RECORD = "TRUE";
  NEXT_RECORD;
  END LOOP;
  COMMIT;
  END;
  
  
  The problem is the value of the checkbox is always null and records are not get inserted into the table. Y at - it elsewhere, that we have to specify the initial value of the box. Not sure why the value of the checkbox becomes void even if the ix checked checkbox.
  
  Thank you
  Didi.

  What you have listed for the property of the initial value of your box?

  Craig...

• Why the initial value of the text box disappear?

  I applied javascript to the text box on this page to make the initial value disappear when the user clicks on the box, but it doesn't seem to work. Can someone please tell me why?

  http://clockdoctors.co.UK/contact_me.html

  You have not included the framework jQuery:

• Initial values of the node

  The configuration guide, the initial value given to a node works as one according to the default rules and slow down the performance of the model.
  
  Perform the first value given for total functionality also contribute to performance problems.

  I think that everything that initializes a value in the Configurator can eventually have an impact on performance. From my experience, simpler models seems not have any notable performance degradation when using defaulting rules. It is usually noticed in the large models. However, in almost all occasions, I encounter undesirable side effects of the use of the default values. The biggest problem is that you can run any questions, if you decide to change the 'initial' value and restore it later a model with the original 'initial value '. in these cases, when the model is restored, the initial value or the default value is not saved as an entry. Instead, the new default is applied. These is generally not desirable.

  For the totals, I suggest that you write a rule that contributes the initial value of the total immediately when the model is true.

  Thank you
  Jason

• Default or initial value to the choice of the Message drop-down list

  Hello
  
  How to set the initial value to choose list (Message choice drop-down) based on the State of certain? in R12.1.3.
  
  setValue do not work, please help.
  
  
  IF cust_function = "NH" then set message of choice initial value items has another b (on A, b, c, d...) in extended CO.
  
  Thank you

  Hello

  for the dropdown list use this

  class oracle.apps.fnd.framework.webui.beans.OAWebBeanPickList

  Get your list of choices

  Use these functions to set initial values based on the State.

  setDefaultValue (String defaultValue)
  setSelectionValue (pageContext OAPageContext, String selectionValue)
  Set selection - internal value of the element of choice that will be shown as selected.

  Kind regards
  Pradeep

• How to go from sysdate as the initial value for reports?

  Hi, I am using Oracle 10 G reports. I would like to know how to pass sysdate as initial value for the property of a date in the parameter element user. Help, please. Thank you

  arms777 wrote:
  I want to say is, if you select range of property for the specific parameter, there is a property for the initial value (type of data, width, mask entry, initial value, Validation trigger, list of values, etc.). Does this mean that I can just put sysdate on the initial value of the parameter property? I really need to use a trigger for this? In forms, I don't have to create a trigger to do this, simply put sysdate on the initial value of the item property. I hope you understand what I mean. Thanks again.

  I can't find another way...

  This from Reports FAQ
  How to set the initial values of the parameters to the form of the parameter at run time? +

  This is what is mainly used for BeforeForm relaxation. Even if you used a select statement to create a search list for the parameter, this statement is completely parsed before the form parameter is opened. Simply assign the parameter to a value in the trigger BeforeForm will choose this option as a default value displayed to the user. For example, suppose you have a parameter called p_input_date that is intended to contain a date of the invoice. The following example will select the date of the most recent invoice being the default and notes that it correctly handle exceptions to ensure that the report does not arbitrarily die if this default setting fails. Also note that, as all the triggers of report, it should return a true or false value.

  function BeforePForm return boolean is
  begin
  select max(bill_period_end_date + 1)
    into :p_input_date
    from billing_period
   where bill_period_end_date <= (select trunc(sysdate)
                                    from dual);
    return (TRUE);
  exception
    when others then
       :p_input_date := null;
       return true;
  end;
  

  If someone useful or appropriate, please mark accordingly.