CQI RTD sample.vi with simulation device

Similar Questions

• "This application is not compatible with your device and cannot be loaded.

  New Java and Blackberry development.

  I built the app BlackBerry Hello World (from samples from the BlackBerry site developer) by using the following:

  Eclipse version 3.4.0 installation

  BlackBerry JDE plugin for Eclipse 1.0.0.67

  BlackBerry JDE 4.6.0.19 component package

  The app is supported very well.

  The app works well in the Simulator.

  I use Eclipse to generate the ALX file.

  Then I try to transfer the file ALX for my BlackBerry Tour using:

  BlackBerry Desktop Manager 5.0.0.8.

  When I try to transfer, I get the following error message:

  "This application is not compatible with your device and cannot be loaded.

  I tried different versions of the package component BlackBerry JDE (4.7, 4.6.1, and 4.5) with no difference in behavior.  Also, I don't think that I use an API that require signature.

  Someone had this problem and was able to remedy?

  The trick works OS 4.7.1

  You will need to compile the code using 4.7

  Edit:

  Ahh... I now see that you have already done this. The forum "new and improved" chops off the coast of all messages on my IE8 'new and improved '.

  What version of office is this? Might not be compatible with the tour?

  Try the application on your device using javaloader (utility that ships with the JDE - check the bin directory).

  JavaLoader-u load myapp.cod

• drivers for simulated devices of NOR-DAQmx (NI9211 etc.) in cDAQ9174

  I'm trying to understand the three methods of calculating the maximum analog input sampling rate below NI CompactDAQ system

  http://zone.NI.com/DevZone/CDA/tut/p/ID/4320

  Problem 1

  In method 1. Build your physical hardware system or simulate your configuration able & Automation Explorer (MAX) using NOR-DAQmx simulated devices

  Buy using my MAX, I was able to build a simulated chassis cDAQ7192, but the NI 9233 modules or 9215, and NI 9211 is not found in the MAX. do I need special disks for them?

  My MAX is verson 4.6.2f1 and LABVIEW2009.

  Problem 2

  Following the method 2 to use the NI CompactDAQ Advisor, 'Performance of analog to calculate' does not appear upward after you set up the chassis.

  Thanks a lot for your help

  Concerning

  Bing

  Your version of MAX and LabVIEW is not relevant. What is your version of DAQmx?

  After you add the chassis, you right click on it to select "set up simulated cDAQ chassis? I did this and was able to select all the devices you mentioned.

• Is it possible to change the sine wave 'exit' a simulation device?

  I work on a LV collection and analysis VI in LabView that interfaces with a CDAQ-9178 loaded with 9215 modules/a. chassis.  In the Measurement & Automation Explorer, I was able to set up simulated devices that work with my code and I get the sinewave / 5 (?) standard signal noise %.

  However, to really test my application, I need a slightly different sine wave with high frequency (1-10 Hz vs the)<1hz sent="" by="" the="" simulated="" device). ="" is="" there="" anyway="" to="" modify="" or="" get="" the="" simulated="" device="" to="" output="" a="" different="" wave? ="" if="" not, ="" are="" there="" any="" other="" simple="" ways="" to="" simulate="" the="" device? ="" i="" could="" write="" another="" vi="" to="" send="" out="" a="" sinewave="" but="" was="" looking="" for="" a="" more="" obvious="" or="" simpler="" solution="">

  Thank you

  # You need to do is call an of the generating functions of waveform instead of the DAQmx Read. Place inside a case, the declaration or the conditional structure disable is fairly simple.

• Expires on simulated device timer

  A timer for a simulated device is supposed to never expire according to http://zone.ni.com/devzone/cda/tut/p/id/3698 under theTiming and Trigering considerations relating to the use of simulated devices where it is written "Watchdog Timers never expire."

  However, simulated X Series USB-6343, who does not have a hardware timer, indicates it is expired after a check of the property expired DAQmx immediately after the dog start a timer job of guard.  The example attached Chan-Watchdog dig write Timer.vi, amended to include the property expired DAQmx shows this behavior when the device is a simulated device.

  DAQmx 9.3, LV2010 SP1

  Now run with DAQmx 9.4 with no time-out error.  Of course, a reboot was involved, and I don't remember with certainty if I rebooted since the time I first noticed this problem.  Maybe I should have done a reboot before testing with DAQmx 9.4 to ensure.

• NI 6509 simulation device

  Hello

  My question should be simple enough, but I have not found the answer.

  I have a NOR-6509 card and it should be possible, according to the different tutorial nor helper I've read, to simulate the device using MAX, without being connected to my laptop. The thing that would be very useful to develop portable applications c# on my computer when traveling away from the office.

  "Now with NOR-DAQmx 7.4 or higher, using simulated devices, you can develop, run, and troubleshoot data acquisition applications without going through the applicable material installed [...] A simulated NEITHER-DAQmx device is a replica of a device created by using the option OR-DAQmx Device simulated in the menu create new from MAX to a function or program without equipment. A device OR-DAQmx simulated behavior similar to a real device. Its driver is loaded, and use programs are fully verified... »

  The fact is that I can't do work at the same time, my request - for example, the application of WriteDigPort.exe provided with examples of dotnet 2.0 - and a device of NOR-6509 simulated by a task generated to simulate an output port Dev1/port 0 for example. I have a conflict error.

  I don't really see not how to simply check that my request goes to the value '1', for example, every bit of my virtual Dev1/port port 0 MAX and seeing the lights 'virtual '?

  Ditto for reading: how e chech with a simultaed device that my request is properly read a port that I set to a specific value?

  Thanks much for the reply!

  Hello

  You can read output simulated. The simulated device aims to offer the possibility to start the program without hardware; also with a simulation device, you can check if the syntax of your program is correct and check if the data you write meets the specifications for your motherboard.

  You might find some useful information here:

  http://zone.NI.com/DevZone/CDA/tut/p/ID/3698#toc3

  Kind regards

• No NOR-DAQmx eligible simulation device

  Hi all

  I am developing an application for a PXI-6132, but I don't have the equipment yet, so I would like to start this with a simulated device, unfortunately when I'm at MAX, I see no device at all to choose, so I was wondering what I can do and I can't wait for material to arrive.

  I don't want to spoil my installations OR so this is the reason why I ask through this support.

  I have attached a few photos on this problem.

  Any ideas?

  I have:
  -LabVIEW 8.6

  NOR-DAQmx 8.7.2

  Thank you very much in advance

  Gozto

  The real is to solve it (I realize) comes to update MAX, I was working with the MAX which was included with LabVIEW 8.6, so I downloaded NIDAQ930f2.exe and it worked.

  Now I am able to virtualize my devices.

  I hope this might help someone with the same question/problem.

  Good day.

• A pack of component allows the simulator device to another?

  I have several packs of component installed in Eclipse. Is it possible to compile a project for, say, 4.2.1 and debugging on a simulator device that comes with, say, the 4.7.0 pack component? Or install a separate 4.7.0 simulator package the only way to do it?

  Enter debug configurations, create a new BlackBerry Simulator. The tab JRE choose JRE Alternative so that you can have different sims for different environments JRE.

• How to call the samples shipped with JDE

  Hello

  I'm new to the BlackBerry development. I downloaded and installed JDE 4.7 which contained similators 9530 and 9500. JDE and Load Simulator fine on my windows XP machine. I use JDK 1.5. I had a few teething problems if anyone can help it will be great.

  It's strange that this simulator does not load if the java environment variables (JAVA_HOME, CLASSPATH and path to the location of the binary java) are defined in the windows environment. It loads well if the environment does not contain these variables. I worked around this by setting the variables in the environment and using a jdkenv.bat file if necessary.

  When I run ide.bat (for JDE) he lookes for javaw.exe in the path which make sure by running jdkEnv.bat before ide.bat. So my JDE also charge very well. I did a generation of samples shipped with JDE he built successfully. So far so good.

  Problem:

  When I try to run the samples, it loads the Simulator fine. I also see the name of the sample applications, if I followed the following phone Simulator {options} USER interface-Advanced Options-Applications online online I can see the names of all listed here demo. But I don't see any UI on the Phone Simulator that I can use to invoke these demonstrations of?

  I tried an explicit charge of the demo by file-> load Java program, it displays an hourglass and returns me to the phone home screen. It also updates the date and time of the application above mentioned location to the new location. But I'm still not a UI element user where I can call it in the demo.

  How to call HelloWorld or PhoneApiLog demo of the Simulator.

  I'm new to the development of BB and I'm sorry if I'm missing something simple. But indications will be useful.

  Concerning

  asachdeva.

  Discovered samples at-online downloads.

  Thanks for taking a peek.

• bat solo3 not shared with other devices to iCloud

  I have a set of rhythms solo3, the connection from my iPhone worked as promised but an iPad running iOS10 and my Mac running Sierra do not see them. All devices are signed with the same iCloud account and the beats are accessible to my watch. Is there something missing that I have to do to ensure that they are shared on iCloud?

  Bluetooth headset have no relationship with iCloud or appleID to all

  to pair a headset bluetooth with a new device, it must put the headset into pairing / discovery mode

  the manual of the bluetooth headset must describe how you are going to do

  If cannot pair the headset with your iPad or your iMac at the same time there is an active connection with your phone

  because it can be connected with 1 device at the time, however, may be a pairing with each of them at the same time

• Accidentally, I put my Macbook not in the stream with other devices

  It is a real irritable and I hope that someone can help you. I've had my Macbook Pro for about 4 years now but had never used icloud.  When I decided to start doing so yesterday I went in iCloud in settings and seen something like: "Do not allow for synchronization with other devices" and accidentally ticked.  Everything already worked well without using iCloud, but now nothing can be synchronized with the Macbook.  Is there something I can do?  I see that the boot Volume has been changed yesterday who must account for this.

  Questions of clarification - were you when you saw synchronizes them only not in System Preferences/iCloud? If this isn't the case here, where were you? If you go into System Preferences/iCloud can you check the boxes to synchronize?

• Is there a way to find the IP address associated with a device that is currently using my Apple ID?

  Hi, is it possible to find the IP address associated with a device that is currently using my Apple ID? There is a device currently using my Apple ID, and I would like to know its IP address. When I connect to appleid.com, the device is listed. The device is an iPhone. It is an emergency situation. Thank you.

  Unless it's on your local network, the IP address won't be useful to you in any way. (and no, you can do that)

  If this is really an "emergency", inform the authorities.

• I have an infinity of transformer Asus Pad and Android Market says that Firefox is not compatible with my device, but your site says that it is. How to do it?

  I want to install Firefox on my Tablet Asus of Infinity transformer and market Play/Android Google says that Firefox is not compatible with my device (even if I have it running well on my phone).

  Your Web site lists compatibility with this camera twice, once as got TF700T and then as Infinity Pad transformer.

  The transformer is up-to-date with all the software, and I am running the latest version of the Google game.

  If you are having problems with the Google game to download Firefox for Android tries to download these versions: http://www.mozilla.org/en-US/firefox/channel/#firefox .

  Don't forget you must enable this settings: allows you to install app from other sources than the Google game

• Why use my original USB cable charger for more than a year now is startig to show a sign that it is not compatible with the device? o

  I used without problem my USB cable for over a year, it is original Apple and yesterday began to show a sign that it is not compatible with the device. How can not be supported if it's Apple.

  This can occur if the cable is damaged in any way. See: recharge your iPhone, iPad and iPod touch - Apple Support for more information.

• I have a samsung saga that runs windows. Any chance firefox mobile will work with my device?

  I have a Samsung saga that works under windows. Any chance firefox mobile will work with my device?

  Mobile Firefox requires an Android phone.