Crash on the screen of Microsoft Corporation

Screen kick upward and crashed to the 'Microsoft Corporation '. Power off then again, chose that recommended such startup repair. Asked and chose to restore. Computer seems to be working fine now but this accident shows everything what should I be concerned about?

X 64 Vista Home Premium.

Thank you.

Thanks for the reply.

I had no problem since the accident. I suspect she had to with a game that requires plug above me. During playback, I got a lot of slowdown and other problems and I uninstalled. If I hire this problem once again I locate and download the dump files and post in this thread again.

I see two other people have had this problem and I hope that they have been able to resolve things.

Thanks again.

VFNNJ

Tags: Windows

Similar Questions

  • System Restore does not work and vista freezes for the screen of microsoft corporation. I can not load even safe mode

    Hello

    A few days ago my laptop started to freeze. I noticed that the system recovery tool did not work either and now it's even worse. When I turn on my laptop

    It goes back to a black screen and the freezer. I tried the recovery since the start of the loading system, but it just says loading files and changes to the screen of microsorf corporation and still works.

    Sometimes when booting, it would say that the laptop was turned hard and give 2 options to start the computer normally or start recovery performance. When I press any button, the laptop freezes and must be activated manually.

    Any help would be greatly appreciated

    Hello

    1. don't you make changes to the computer before the show?

    Please follow the steps below.

    Method 1:

    Disconnect any external devices (except the keyboard, mouse and monitor) connected to the computer.

    Try to perform the last good known Configuration.

    http://Windows.Microsoft.com/en-us/Windows-Vista/using-last-known-good-configuration

    Method 2:

    Follow the steps from the link below.

    http://Windows.Microsoft.com/en-us/Windows-Vista/what-to-do-if-Windows-wont-start-correctly

  • Vista freezes at startup, with the logo of "Microsoft Corporation".

    Hi all

    For some reason any when I turn on my computer Vista is stuck at the 'Microsoft Corporation' logo screen, with the little green loading bar and it will not move beyond this point. I must then hold down the off button to turn it off and then use the repair system (or is it restart?... one that will automatically appear anyway...) I have to use the system restore too) etc. to make it work. The problem is that this happens about half the time I turn the computer, so is a slow process that I had to endure.
    Someone at - it ideas? I hope this means does ' t that I format the hard drive and reinstall Vista, that is not something I know how to do...
    Other points to note are that it seems to be related to Antivirus programs... I had Norton, and sometimes when the above problem happened, once connected, Norton would say that my computer has remained and a whole bunch of things were turned off... I could not turn them back on. I gave Norton a while ago, and it seemed to fix it for a while. However occasionally I have AVG and a similar problem occurs now (although very rarely... normally, the computer hangs just at startup as shown above). I also noticed that Startups will take much longer now, and sometimes if the computer is past the screen of Microsoft Corporation, it will be just a black screen for about 20 seconds and sometimes comes up with a message referring to the registry keys (I don't remember the exact message). He eventually starts however.
    I used the File Checker system as stated in the answer to the question above, but the result was "no breach of integrity", so I guess that's not that.
    Thank you, and any help would be appreciated,
    kcodon

    Hi kcodon,

    Thank you for using the Microsoft Windows Vista Forums.

    You must remove the external devices connected to the computer to check the issue.

    Try to start the computer in safe mode.

    Follow the instructions below to start the computer in safe mode.

    1 turn on the computer or restart the computer

    2 start typing the F8 key. The Windows Advanced Boot Menu of Options will appear. If you start typing the F8 key too soon, some computers display a "keyboard error". To resolve this issue, restart the computer and try again.

    3. check that the safe mode option is selected (the High option of the page)

    4. press ENTER. The computer then begins to start in safe mode.

    If this does not work, let us start the computer in a clean boot state to determine.

    To perform the clean boot procedure, follow the instructions in the link below.

    http://support.Microsoft.com/kb/929135

    Perform the clean boot procedure to find the service that is causing the problem.

    If the problem persists, you need to do the upgrade inplace to solve your problem.

    Please post back and let us know if it helped to solve your problem.

    Kind regards

    KarthiK TP

  • Windows vista 64-bit crashing into the screen blue and often impossible to reboot after crash

    My windows crashes constantly everytime I try to watch a video or go to a page with java, if I try to install the new version of Adobe, it stops it's self down and do not restart, just it becomes black and stops.  I pay for membership to netflix and I can't even watch a movie. I go on youtube it crashes, I'm trying to play farmville on facebook, he crshes... in a blue screen and this is what I get when I start it again:

    Signature of the problem:
    Problem event name: BlueScreen
    The system version: 6.0.6001.2.1.0.768.3
    Locale ID: 1033

    More information about the problem:
    BCCode: 124
    BCP1: 0000000000000000
    BCP2: FFFFFA8006F77030
    BCP3: 00000000B 6000000
    BCP4: 0000000000000181
    OS version: 6_0_6001
    Service Pack: 1_0
    Product: 768_1

    Files helping to describe the problem:
    C:\Windows\Minidump\Mini071911-04.dmp
    C:\Users\DrGraceG\AppData\Local\Temp\WER-85098-0.SysData.XML
    C:\Users\DrGraceG\AppData\Local\Temp\WER26A2.tmp.version.txt

    Read our privacy statement:
    http://go.Microsoft.com/fwlink/?LinkId=50163&clcid=0x0409

    July 20, 2011 Crash, 6 times

    Signature of the problem:
    Problem event name: BlueScreen
    The system version: 6.0.6001.2.1.0.768.3
    Locale ID: 1033

    More information about the problem:
    BCCode: 124
    BCP1: 0000000000000000
    BCP2: FFFFFA80070B6030
    BCP3: 00000000B 6000000
    BCP4: 0000000000000181
    OS version: 6_0_6001
    Service Pack: 1_0
    Product: 768_1

    Files helping to describe the problem:
    C:\Windows\Minidump\Mini072011-01.dmp
    C:\Users\DrGraceG\AppData\Local\Temp\WER-144456-0.SysData.XML
    C:\Users\DrGraceG\AppData\Local\Temp\WEREBE4.tmp.version.txt

    Read our privacy statement:
    http://go.Microsoft.com/fwlink/?LinkId=50163&clcid=0x0409

    July 21, 2011 breaks down, 4 times

    Signature of the problem:
    Problem event name: BlueScreen
    The system version: 6.0.6001.2.1.0.768.3
    Locale ID: 1033

    More information about the problem:
    BCCode: 124
    BCP1: 0000000000000000
    BCP2: FFFFFA8007066030
    BCP3: 00000000B 6000000
    BCP4: 0000000000000181
    OS version: 6_0_6001
    Service Pack: 1_0
    Product: 768_1

    Files helping to describe the problem:
    C:\Windows\Minidump\Mini072111-03.dmp
    C:\Users\DrGraceG\AppData\Local\Temp\WER-57470-0.SysData.XML
    C:\Users\DrGraceG\AppData\Local\Temp\WERC13B.tmp.version.txt

    Read our privacy statement:
    http://go.Microsoft.com/fwlink/?LinkId=50163&clcid=0x0409

    July 22, 2011 crashed 7 times

    Signature of the problem:
    Problem event name: BlueScreen
    The system version: 6.0.6001.2.1.0.768.3
    Locale ID: 1033

    More information about the problem:
    BCCode: 124
    BCP1: 0000000000000000
    BCP2: FFFFFA8007066030
    BCP3: 00000000B 6000000
    BCP4: 0000000000000181
    OS version: 6_0_6001
    Service Pack: 1_0
    Product: 768_1

    Files helping to describe the problem:
    C:\Windows\Minidump\Mini072111-03.dmp
    C:\Users\DrGraceG\AppData\Local\Temp\WER-57470-0.SysData.XML
    C:\Users\DrGraceG\AppData\Local\Temp\WERC13B.tmp.version.txt

    Read our privacy statement:
    http://go.Microsoft.com/fwlink/?LinkId=50163&clcid=0x0409

    Many many people have this problem when I talk to others. Miscrosoft compromises our computers so we would have to buy new ones?
    They know there is a problem and they don't even try to find a solution for this. In this economy, they force people to buy new computers, they will just leave people blocked company becase NOBODY takes the phone, if you do not have email, people don't keep in touch, if you are not on a social network or business networking nobody will know your business, you won't make any money nobody reads the ACTUAL newspapers these days, everybody reads the news on the internet. They only hurt people, they are forcing anyone to buy a new computer, people just can't afford it. Hundreds of thousands of people can barely keep their utilities on. In doing so I wish they will reconsider. I am disabled I will definitely cut if my computer goes down for good.

    Can we do any smell that?

    There are also a lot that I need to run startup until the restoration. Windows restarts after the crash of the blue screen, I reinstalled windows twice, it works fine until I have start to install all updates. I have only installed MSE and it still happens. I lost all my music I paid a lot of money for, my paintings for children, important documents, all because I had to reinstall windows twice now.  I may have to reinstall them once more and I do NOT wish to install the updates again. He really never stops until I installed updates to windows. I thought that if I use the programs from Microsoft that it will work, because after all, it's all done by the same company, but no, nothing works. I am so in the sincere real despair. Be alone without technical skills, hardly what actually on my disability check, now I'm going to cut everyone. Now I can't do ANYTHING without it crashing, nothing fun anyway. I tried Microsoft fix, I tried so many solutions. I paid for Adobe photoshop, because I like to draw things and I'm terrified to install it. I'm afraid to do anything fun or useful on this computer.

    If I can afford a new computer at any time, I think I will try Apple, I lost my trust in Windows. Unless they make an effort to solve this problem, then I would give them a chance again, but not if they will try to help. I'm so frustrated. I spend a lot of money on this computer, it's an ENTERTAINMENT laptop and I get not very amused.

    What is going on?

    Hello

    Could be heat related - try using a small fan to blow into the air intakes to see if that helps.
    It is just like it loses power or stop it in the normal way? Heat associated
    does not necessarily mean excessive heat, it could be something is too sensitive to the same
    normal levels of heat. Also a computer will produce more heat as is pointed out how adding
    software or updates, among other measures, causes it. Of course those actions should not
    cause enough stress or heat to shut down the computer.

    For a laptop on everything that you can do is reinstall the memory and clean the ventilation openings (still may try to add
    a small fan as a test). Of course first remove all power.

    This sounds like material so if the above does not help you then probably need help
    a real computer store (not the leeks and the glances at a Best Buy or other stores) or the
    Support of system Maker.

    ===========================================================

    Check this thread for more information on using BlueScreenView, MyEventViewer and other
    Troubleshooting BlueScreens - top 3 responses (+ 1 other) methods.

    http://social.answers.Microsoft.com/forums/en-us/w7repair/thread/c675b7b8-795f-474d-a1c4-6b77b3fcd990

    We can analyze the minidumps if make you it available to the SkyDrive or another file
    sharing sites.

    ZIP or download the content of the C:\Windows\minidump

    Use SkyDrive to upload collected files
    http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65

    ----------------------------------------------------------

    BCCode: 124 0 x 00000124

    This is usually heat related, faulty hardware, memory, or processor even if it is
    "possible" he is associated (rare) driver. To be able to remove ALL and reinstall all the cards, memory
    and cables (at both ends) - actually delete and replace - are not just tight. Ensure
    the system has proper ventilation - add a small fan blowing in the contributions. Carefully
    Inspect the card mother and other cards for damage. Pay attention to the fatal material
    error implicitly. You may need a computer store real (not the leeks and glances at a BestBuy
    or other BigBox stores) or system manufacturer support.

    There has been a few cases where Norton/Symantec and other antivirus/security
    programs have caused this error.

    BCCode: 124 0 x 00000124

    Bug WHEA_UNCORRECTABLE_ERROR control has a value of 0 x 00000124. This bug
    verification indicates that an unrecoverable hardware error has occurred. This bug check uses the error
    data provided by the error Architecture WHEA (Windows Hardware).

    0 x 00000124<-- read="" this="">
    * 1289.html http://www.faultwire.com/solutions-fatal_error/the-System-encountered-an-uncorrectable-Hardware-Error-0x00000124-

    =========================================

    Look in the Event Viewer to see if something is reported on those.
    http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm

    MyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
    TIP - Options - Advanced filter allows you to see a period of time instead of the entire file.
    http://www.NirSoft.NET/utils/my_event_viewer.html

    -------------------------------------------------------------------------

    Here are a few ways to possibly fix the blue screen issue. If you could give the blue screen
    info that would help. Such as ITC and 4 others entered at the bottom left. And all others
    error information such as codes of STOP and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.

    As examples:

    BCCode: 116
    BCP1: 87BC9510
    BCP2: 8C013D80
    BCP3: 00000000
    BCP4: 00000002

    or in this format:

    Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
    Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000

    It is an excellent tool for displaying the blue screen error information

    BlueScreenView scans all your minidump files created during 'blue screen of death '.
    hangs and displays information about all accidents of a table - free
    http://www.NirSoft.NET/utils/blue_screen_view.html

    BlueScreens many are caused by old or damaged, in particular the video drivers drivers however
    There are other causes.

    You can do mode if necessary safe or the Vista DVD command prompt or
    Options recovery if your system is installed by the manufacturer.

    How to start on the System Recovery Options in Windows 7
    http://www.SevenForums.com/tutorials/668-system-recovery-options.html

    You can try a system restore to a point before the problem started when one exists.

    How to do a system restore in Windows 7
    http://www.SevenForums.com/tutorials/700-system-restore.html

    -------------------------------------------------------------------------

    Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

    Enter this at the command prompt - sfc/scannow

    How to fix the system files of Windows 7 with the System File Checker
    http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

    How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
    generates cbs.log Windows Vista (and Windows 7)
    http://support.Microsoft.com/kb/928228

    The log can give you the answer if there is a corrupted driver. (Says not all possible
    driver problems).

    Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

    How to run the check disk at startup in Windows 7
    http://www.SevenForums.com/tutorials/433-disk-check.html

    -------------------------------------------------------------------------

    Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, part 3
    keyboard and mouse, as well as of other major device drivers.

    Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
    http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

    Installation and update of drivers to 7 (updated drivers manually using the methods above is)
    to ensure that the latest drivers from the manufacturer of system and device manufacturers are are preferably)
    http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.html

    How to disable automatic driver Installation in Windows Vista - drivers
    http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
    http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

    -------------------------------------------------------------------------

    How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart
    quit unexpectedly
    http://support.Microsoft.com/kb/958233

    Troubleshooting Vista Blue Screen, error of JUDGMENT (and Windows 7)
    http://www.chicagotech.NET/Vista/vistabluescreen.htm

    Understanding and decoding BSOD (blue screen of death) Messages
    http://www.Taranfx.com/blog/?p=692

    Windows - troubleshooting blue screen errors
    http://KB.wisc.edu/page.php?id=7033

    -------------------------------------------------------------------------

    In some cases, it may be necessary.

    Startup Options recovery or Windows 7 disk repair

    How to run a startup repair in Windows 7
    http://www.SevenForums.com/tutorials/681-startup-repair.html

    How to start on the System Recovery Options in Windows 7
    http://www.SevenForums.com/tutorials/668-system-recovery-options.html

    How to create a Windows 7 system repair disc
    http://www.SevenForums.com/tutorials/2083-system-repair-disc-create.html

    I hope this helps.

    Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

  • CS6 Flash crashing on the screen - loading everytime.

    Hi all

    Ive just bought Adobe Design and Web Premium.

    Ive managed to run other applications without any problem, like Photoshop 64 bit, InDesign, Dreamweaver and Illustrator 64bits.

    However, whenever I tried to run Flash Professional CS6 it crashes when loading screen appears.

    It says "Adobe Flash CS6 has stopped working"

    My system works on Win 7 64 bit

    Ive also updated my windows and ran the Adobe updates.

    Oh also tried to uninstall and cleanup using the Adobe Creative Suite cleaner

    It crashes again... only Flash Pro. The rest is not got any problem.

    Would be grateful if there is assistance or advice you can give.

    Update... After trying all the ideas here and downloading the patch and still does not, I downloaded Autoruns and removed all startup, which was not microsoft or intel... Flash starts. I then delivered everything I thought important that what I had to as pilots and monitor calibration, etc... Finally tracked down the conflict and my Wacom tablet driver, (which is very annoying). It's an Intuos 4.

    TabletServiceWacom Tablet Service for professional driver Wacom Technology, Corp.. c:\Program files\tablet\wacom\wacom_tablet.exe

    Update driver dated August 2012 resolved the problem.

    Scott

  • The Windows Vista startup disk crashes after the screen "loading files".

    I am trying to install Windows Vista on a new computer. The computer recognizes the boot disk and I can go beyond the "Loading files" screen, but when I get to the screen that looks like the standard login screen, the menu to install Windows never appears. The display will be just what it was. Any help would be appreciated.

    Hello Trey

    I suggest you see if there is an update of the bios for the motherboard. You can also check out the link below and see the suggestion given by Tim Quan.

  • Windows 7 crash on the screen saver

    Hello

    I recently built a computer and have been broadcast on the problem of my PC crashing when you use the "Rotate display" feature in the options of power sleep menu. The screen goes black and the fans turn up to max and the PC will be unresponsive until I do a hard reboot. If I do not use the display off function, the computer will sleep very well. However if I use a screen saver, and then the PC will never put it to sleep. My PC is overclocked, but I've never had an accident that has not been associated with sleep mode. This has really been a problem I've been avoiding the use of these features, although I'd like to find the cause of the problem if possible.

    I've updated the bios and fixed the crash, however fans still spin every time the screen goes to sleep. The resolution of the problems of power did nothing.

  • I have a new laptop and try to download a cloud that Photoshop crashes to the screen how can I go back to photoshop cc2014

    I have a new laptop and try to download a cloud Fotoshop blocks on the screen how can I go back to photoshop cc2014 @.

    What operating system uses your new laptop?

    https://helpx.Adobe.com/Photoshop/KB/CC-applications-crash-immediately-launch.html

    For older versions, it's can always help

    https://helpx.Adobe.com/Creative-Suite/KB/troubleshoot-launch-issues-problems-CS5.html

    Or you could download the accident report, and we'll try and see what's causing your problem

    http://blogs.Adobe.com/Crawlspace/2011/03/submitting-crash-reports.html

    You can download CC 2014 from the Application Manager in previous Versions and have both versions on your computer.  This way you can use CC 2014 as he tried to fix 2015.1

    Good luck

  • How to rotate your screen 90 degrees computer, my computer crashed and the screen turns off 90 degrees

    my computer screen is rotated 90 degrees, how do I turn right?  Help

    CTRL + PERIOD (.) Rotate the image to the right

    CTRL + COMMA (,) rotate the image counterclockwise

    The ability to rotate the screen image is a feature of your video card, to help work with instructors who rotate the portrait orientation. Almost certainly you accidentally pressed Ctrl-Alt and an arrow.

    Rotate using these keys.

    UTC/GMT is 16:38 on Monday, January 9, 2012

  • Computer keeps restarting... didn't even get to the screen of Microsoft

    HP laptop with Vista Home Premium.  When trying to start computer, stops almost immediately and try to restart.  Will do this for HOURS if I let him, again and again, and more.  Is never past the black screen.  F8 does not work.  Even tried to partition the drive in a period where he DID acutally starts.  No disk in the CD-Rom drive.  I'm puzzled.  Any ideas?  I'm ready to play portable frisbee at this stage.

    HP laptop with Vista Home Premium.  When trying to start computer, stops almost immediately and try to restart.  Will do this for HOURS if I let him, again and again, and more.  Is never past the black screen.  F8 does not work.  Even tried to partition the drive in a period where he DID acutally starts.  No disk in the CD-Rom drive.  I'm puzzled.  Any ideas?  I'm ready to play portable frisbee at this stage.

    Sounds like a problem of material for me.  If you get nothing written on the screen at all it is not same ad successfully and what is a failure.  Could be a number of issues. Time for the maintenance of the material from a reliable source.
     
    If you get the original PUBLICATION information, then the attempt to enter setup using any combination of keys is necessary (normally Del, ESC, F1, F2 or F10) and make sure it contains no error message.

  • Pre Bluetooth crashes when the screen turns off

    Having a problem with the Bluetooth on my pre. I coupled it with a Plantronics Voyager 855. Initial pairing works very well, but after the screen on the pre turns off, the connection goes bad. When I turn the screen back on, the Bluetooth application on the phone always displays the connected headset, but it is not. If I try to play music, there is no sound, and if a call comes in, I can hear the person on the phone, and not on the helmet.

    About 30-45 seconds after the screen turns off, I hear the high tone of the headset which means that it has lost connection.

    I don't think that the headset is bad. It worked very well with my previous phone.

    If I have music when the screen turns off, the connection is very good.

    It's like, when there is no active communication between the phone and the headset, and the screen turns off, the bluetooth on the phone goes into a blocked State.

    I can restore the connection by turning off bluetooth on the phone and then on again. It reconnects to the helmet, until the next time the screen turns off.

    I tried this to get a better idea of the problem...

    If I remove helmet > disable bluetooth phone > turn on bluetooth on the phone > put the headset in pairing mode, it pairs fine.

    If I remove helmet > disable bluetooth phone > turn on bluetooth on the phone > turn off the screen > wait 45 sec > turn on the screen > put the headset in pairing mode, then it does not. Again, it is like turning off the screen causes the bluetooth of the phone hang.

    Given that the screen turns off fairly quickly, I basically disable bluetooth phone and back on every time I want to use it.

    Any thoughts?

    My problem is solved.  Turns out that I had a defective unit.  He traded last night, and it works fine now.  Got the yellow box this time.  First of all, we had the black cover.

    The swap was a little complicated.  I bought in a store of absolute Wireless in Garner, North Carolina.  It is a reseller of third party.  They did it to a Sprint service center to have a technician "certify" the default before they would replace it by car through the city.  And of course, the service center couldn't do the replacement, so I had to go back through the city to the point of purchase after they certified it.  Best of all, the procedure of "certification" involved explaining the problem to the technician for about a minute, she agreed with me that it was malfunctioned and his writing his employee with the ID on the back of a business card to bring back me to the first shop.  She has not yet turn the phone on itself.  She said pretty much the guy to the absolute Wireless has been a * beep * by sending me to it in the first place b/c, we could just do this by phone.  PITA BREAD.  But I suppose it is, that's what I to do not buy directly from Sprint.

  • My Windows Vista crashed on the screen is blue, can not not rebooted, can't not to start, f8, f9, f10 does nothing

    HI.my windows vista crashed.i have recovery disk, but when I do I see this messege:windows in not shoting down full and can not read boot file.and whene I want low shoting or restart I have blue screen.

    Hi, Mohammad Ali G,.

    (1) since when are you facing this problem?

    (2) remember to make changes?

    (3) what is the complete error message you receive?

    (4) what is the number of brand and model of your computer?

    Step 1: Disconnect all external devices (printers, scanner, USB (universal serial bus) readers, etc...)  Except the keyboard and mouse and then start.

    See the article below


    Windows Vista or Windows 7 unbootable and the Startup Repair tool does not resolve the problem
    http://support.Microsoft.com/kb/934540

    Step 2: See the steps mentioned in the link below

    Pick up the pieces after a computer crash
    http://Windows.Microsoft.com/en-us/Windows-Vista/picking-up-the-pieces-after-a-computer-crash

    For the recovery of the computer back to factory settings, you must contact the manufacturer of the computer.

    Note: Restoration of factor is a favorable condition of a computer as that set up by the manufacturer of the computer and is specific to the manufacturer. This process will put the computer to its original factory condition, data (and programs that were installed later) on the computer will be lost.

    You may need to check the documentation that came with the computer to Factory Restore (System Restore) or contact the computer manufacturer.

    Important: It is recommended to make a backup of your data before performing any Installation of Windows.

  • Satellite U400-131 crashed while the screen of the BIOS udpate - now black

    Bios Update crashed my laptop Satellite U400-131, now I got the black screen and don't know what to do?

    Someone knows how to fix this?

    Thank you

    Vries Matthijs

    This bad s Companion
    It was the worst case that could appear wile BIOS update.

    There is not a lot of things you could try
    In your case the ASP must be contacted in order to check the machine and the module ROM where the BIOS is stored

    If you're lucky, while the ROM module must be flashed again and the laptop should start again if the worst cases the motherboard must be replaced.

  • When I try to open an attachment to an e-mail, I get the screen of Microsoft Office 2010. Why?

    I have attempted to open an attachment and had problems.  Then, I received a message through Microsoft Office (I think) who asked how I wanted my attachments open and checked Microsoft Office 2010.  How to change this back and why I can not open attachemets .pdf?

    Hello

    First of all to find any pdf file in your file system. Then right click and click 'Open with', go to choose program, select Adobe Reader and check the box always 'using the program selected... '. "and then click OK.

    This should fix your pdf file extension association.

    If it doesn't, uninstall Acrobat Reader and install the latest version from http://www.adobe.com/downloads/

    Tricky

  • How to capture the screen in Microsoft Windows 8

    I saw a lot of videos on YouTube on the settings of Windows, and I was wondering how they capture their screen like a video. I asked a person and he suggested me to use Cam Studio. I tried to use it, but I discovered that it was very difficult for me to use.

    I need software screenshot with the possibility to mix videos, add captions, add tracks at bottom. I also want to make a GOOD video "INTRO" and "GOOD".
    Please, can someone help me?
    I need this software so bad. I have to make a video for my computer CTTP, Grade 7.
    Please help with in 2 weeks.
    YOURS SINCERELY.
     

    You can try Hypercam http://www.hyperionics.com/hc/

    or maybe http://www.avs4you.com/ and download video editor

Maybe you are looking for