Create a Listbox control in the dialog box

Similar Questions

• Audio controls in the dialog box (part 2)

  He lacks the control to close the Audio dialog box. I tried to follow the directions to rename the Captivate file in folder users/username/AppData/Local/Adobe (Win7). What I found there were three files for Captivate: Captivate 6.0 (the date is October 2012 when I made a test), an another Captivate 6.0 (x 64) dated yesterday when I re-installed, and a folder of 6.0x64 HeadLessCaptivate also published yesterday which is empty.

  The solution 'to rename the folder Adobe 6.1"provided to another Member of the forum has failed. Should I just delete all files of Captivate 6 the location AddData/local/Adobe, uninstall and reinstall the whole shebang (again)?

  Hello

  It seems to be a matter of preference.

  You can rename all these files to Adobe Captivate 6_ old or any name, only rename them. Captivate must be closed by renaming them.

  Then run Adobe Captivate as an administrator and check the audio editor.

  Thank you.

• The dialog box to create a submap appears, but the submap is not installed

  Hello
  I select a map in the e-mail section and in the file menu that I choose to create a submap.
  The dialog box is displayed, I learn the name of the submap, then click to create, the dialog box closes but any submap is created.

  Thanks in advance for a quick response.

  Roman.

  If you are using an IMAP e-mail account, and you create a subfolder, you will have to 'register' to actually see this folder.

  Try this:
  Right-click on the name of the e-mail account, and then select 'subscribe '.
  You should see a list of folders and subfolders.
  Select the subfolder, and then click OK.

• «Login process failed create the dialog box options security.»

  On a Vista desktop, startup takes up to 2 hours to display the desktop icons. After that the icons appear Finally, none will run. The error message before full boot, I get up, it's "" logon process failed create the dialog box options security. " I tried a clean boot, boot without failure, even booting with a boot disk and try to do a restore. All I get is "no restoration is available on this computer." Once he finally starts, I can run regedit, but not the Task Manager or any other executable. Finally had to reformat and reload, but would like an answer for this strange behavior.

  Hello

  You could deal with the issue because of some third-party security patches on the computer. Most of the time, it will be a virus on the connection process attack. She would not allow the user profile of all loading as well as the security settings of the created user profile.

  Reference:

  10 ways to fix your PC

  http://Windows.Microsoft.com/en-us/Windows/explore/10-ways-to-tune-up-your-PC

• When I select this option I get the dialog box 'Create image s system' but it cannot find any 'backup devices on this computer"and lists the error 0 x 81000036

  Error image system original title: windows 7 0 x 81000036

  I'm doing a backup system image.  When I select this option I get the dialog box 'Create image s system' but it cannot find any 'backup devices on this computer"and lists the error 0 x 81000036.

  I have an ESATA connection on my Dell laptop I was trying to make the image on.  I use the unit every day to save files and which works very well.  He just leaves me CCADE with the system image backup...

  any ideas?

  Hello

  ·         You have created a system image backup before that?

  ·         You did it changes on your computer?

  ·         Is your esata formatted NTFS drive?

  Try to save the image of the boot system: http://support.microsoft.com/kb/929135

  Note: make sure that you start the computer in normal mode after a repair.

  See also the linkfor more information about the backup: http://windows.microsoft.com/en-US/windows7/Back-up-your-programs-system-settings-and-files

• I created signatures and look OK in preferences, but I can't use them.  It worked once, but I don't know how or why.  I don't get all the dialog boxes.

  I created signatures and look OK in preferences, but I can't use them.  It worked once, but I don't know how or why.  I don't get all the dialog boxes.

  Thank you.  I read the article you quoted, as well as others, several

  times.  Creation has been problem free.

  My problem is that AID has never said, that I could find, HELP or

  TIP to search for a tool called certificates.  I searched,

  Signatures, Signatures Digital and many others but they lead no where.

  I think that HELP need HELP.

• Can someone help me create a script to repeat to simply open the dialog box to create a link?

  Can someone help me create a script to repeat to simply open the dialog box to create a link?

  the "Connect" command uses the same dialog box as the command to "Place", except for the option "Replace" verified... so, use Ctrl + Shift + P to bring up the place dialog box, select your new image and select the checkbox "replace".

  If check 'Replace' with the mouse slow you down, after you have selected your image, the tab key 'press' 3 times to change the focus, and then press the SPACEBAR to check it out, then ok to place.

• Feature request: option to not have an action button in the dialog box

  As is, the dialog box requires you to have an "OK" button and a "Cancel" button (the name can be changed...) - which will remove the dialog box. Buttons more than that and you must define an incidental view or place in points of view buttons - what is very good, except when a dialog box serves more as a framework, in which case it would be better if only one button dismissed the dialog box (for example "made").

  Rob

  Here's a way without papers to create a dialogue with just one 'fact' button.  Not sure you want to rely on this good:.

  local LrDialogs = import "LrDialogs".
  local LrFunctionContext = import "LrFunctionContext".
  local LrTasks = import "LrTasks".
  local LrView = import "LrView".

  function search local button (x, label, visited)
  If visited == nil then went = {} end

  If type (x) ~ = 'table' or visited [x] then return nil end
  visited [x] = true
     
  If x._WinClassName == 'AgViewWinPushButton' and

  x.title == tag can
  Return x;
  end
         
  for k, v in pairs (x) is
  local result = button Search (v, label, visited)
  If the result then end result
  end
     
  Return to zero
  end
     
  local f = LrView.osFactory)

  local command = {f: column}
  f: static_text {title = "Look Ma! Not OK or cancel. »},
  f: edit_field {value = "fields"},
  {f: push_button {title = "Do It"}}

  LrTasks.startAsyncTask (function)
  While true
  local okButton = button Search (controls, 'OK')
  If okButton then
  okButton.enabled = false
  okButton.visible = false
  return
  end
  LrTasks.sleep (0.1)
  end
  end)

  {LrDialogs.presentModalDialog}
  {title = 'Test', content = speed control, cancelVerb = "Done"}

• Setting position of the dialog box

  I'll call the dialog function a simple button on the palette of the dialog box.  When running, the dialog box always appears in the center of the VI window, regardless of where the VI window.  The dialog box covers indicatorsthat, the user should see.

  Other that to move the indicators on the front panel, is there something that can be done to move the dialog box to be perhaps outside the front window?  I see no setting for a position of dialog.

  I know that I can always create a Subvi as a dialog box and define the position of the window, but I was wondering if the primitive location of Labview could be changed.

  What I did when I ran across something like this, it is to carry the message to display to the express VI user and right-click and select everything that the option is called to make a normal VI. Then you can dig in and copy the source code or save as and make a copy of change needed. In this way, you keep all the existing resize based on the input text if a message is displayed, etc.. I think that this VI dressed just the primitive dialogues, if you have a lot more flexibility

• Subvi behaves like the dialog box

  Hello LV'ers.

  I have a problem in my program of LV: 'I need my Subvi to behave like a dialog box.

  Design: if I call this Subvi (through the server VI - FPopen of the property node), my mainVI should NOT be controlled until the end of the Subvi. I think it's the same based on the dialog box, once the dialog box appears, we need to deal with first before you can make the controls of our main VI.

  my current status: I have two while loops, running in parallel: 1st loop for tracking data, 2nd loop of the menu setting. the Subvi that opens has been in the 2nd loop - it appears when I pushed the button (event structure/VIserver). now, once I called this Subvi, I can still click and control my mainVI that should not happen!

  I think it's quite possible, I don't know how. Anyone who knew this feature?

  Kind regards

  Properties of Sub - vi, the appearance of windows, click on Dialig.

  /Y

• MS Photo Gallery, how can I activate the "do not show this again" when the dialog box appears whenever I try to download a picture to another location?

  How can I activate the "do not show this again" when the dialog box appears whenever I try to download a picture to another location?

  The dialog box that appears frequently when I try to convert or download photos, shows the shadow of this question - I want to make it active until the times dialog box stops appearing I scroll the photo folders.

  Thank you

  I got the last part of what you wanted, which was simply not the message

  The key is that you have to allow this program through your windows firewall.

  Go to your look for the windows Firewall Control Panel,

  There should be a list to allow a program through windows firewall, look at the top left.

  If you feel safe doing this, vlc is not one that I would feel safe with, but to you, it has a function to browse to find the program to be added to your trusted list or access through your firewall.

  Still, it may give you a warning but could release the message?

• Cannot access the dialog box when I right click

  I have a laptop with Vista Ultimate. Previously, I was able to right click on the desktop to access the dialog box. I can do it no longer. Can anyone provide a solution.

  To toggle to the current user

  Start > run > Regedit
  Goto registry key: HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Policies\Explorer
  Modify/create the types of data accepted by value and value name (s) as described below.
  Data type: DWORD / / value name: NoViewContextMenu
  For value data: [0 = off / 1 = on]
  Restart and exit Registry

  To turn to Local computer

  [Start] [Run] [Regedit]
  The registry key: HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\policies\Explorer
  Modify/create the types of data accepted by value and value name (s) as described below.
  Data type: DWORD / / value name: NoViewContextMenu
  For value data: [0 = off / 1 = on]
  Restart and exit Registry

• A screen popup menu is opened after the closure of the dialog box

  Hello

  I have a test application with a screen containing a button.

  When I click on the button (pressing the button on my BlackBerry 9220 trackpad), it opens a dialog box.

  Then when I press ESC to my BlackBerry 9220, it closes the dialog box and I'm back on my screen.

  Now, if I add to my screen, a menu item, the changes in behavior:

  When I click on the button (pressing the button on my BlackBerry 9220 trackpad), it opens a dialog box.

  Then when I press ESC to my BlackBerry 9220, it closes the dialog box and opens a menu screen.

  So, I would add my item of menu but keeping the old behavior of my application after you close the dialog box.

  Any idea?

  Thank you.

  Best regards.

  Here is the code:

  Import net.rim.device.api.ui.UiApplication;
  Import net.rim.device.api.ui.component.ButtonField;
  Import net.rim.device.api.ui.component.Dialog;
  Import net.rim.device.api.ui.container.MainScreen;
  Import net.rim.device.api.ui.Field;
  Import net.rim.device.api.ui.FieldChangeListener;
  Import net.rim.device.api.ui.MenuItem;
  Import net.rim.device.api.util.StringProvider;
  SerializableAttribute public class TestApplication extends UiApplication
  {
  public TestApplication()
  {
  this.pushScreen (new TestScreen());
  }
  Public Shared Sub main (String [] args)
  {
  Application TestApplication = new TestApplication();
  application.enterEventDispatcher ();
  }
  }
  final TestScreen class extends FieldChangeListener implements screen
  {
  public TestScreen()
  {
  / * MyMenuItem MenuItem = new MenuItem (new StringProvider ("my menu item"), 0 x 230000, 0); * /
  ButtonField myButtonField = new ButtonField ("button my field");
  myButtonField.setChangeListener (this);
  This.Add (myButtonField);
  / * this.addMenuItem (myMenuItem); * /
  }
  ' Public Sub fieldChanged (field field, int context)
  {
  Dialog.Alert ("test");
  }
  }

  Here are a few screenshots:

  

  

  

  It comes from the popup menu. create the button with CONSUME_CLICK would be the simplest solution.

• Redirect when press button ok on the dialog box

  Hello

  How can I redirect the user when you press the button on a dialog box?

  Thank you

  adrianeireyahoo wrote:

  OK, but how to get to the ok button.

  Dialog.Alert ("cannot send results, check the connection, please try again");

  Why do you need to access the OK button of the alert? Just do what you want to do after the display of the dialog box - the statement after Dialog.alert will be reached only after the user presses the OK button (in general). If you want to detect if the user rejected the dialogue this or any other way, create your own one, doModal on it and analyze the returned result:

  Dialog myWarning = new Dialog(Dialog.D_OK, "Unable to send results, check connection, please try again", Dialog.OK, Bitmap.getPredefinedBitmap(Bitmap.EXCLAMATION), 0L);
  if (myWarning.doModal() == Dialog.OK) {
    // OK button was pressed - do what you need here
    ...
  }
  

• Doubt in the dialog box

  I have my custom dialog box, which contains the text edit tracking ok Cancel button, when I press ok and Cancel button, the appropriate events are scheduled

  In my code, whatever i add (values that I might add) in the editfield of the dialog box, it is entered in the form, even if I press Cancel button, how to achieve this?

  The code examples will be useful.

  Concerning

  Rakesh Shankar.P

  I think that this example corresponds to what you are looking for.

  -How to create a custom dialog box

  http://www.BlackBerry.com/knowledgecenterpublic/livelink.exe/fetch/2000/348583/800332/800505/800256/...