Create a new project from an old project

Similar Questions

• I just want to know how it happened to one of our producer/Editor. It is his story. "She hung the three hard drives to 9 from FCP, has opened the program from Premiere Pro and created a new project file. Then she dragged by season by show .mxf files in th

  I just want to know how it happened to one of our producer/Editor. It is his story. "She hung the three hard drives to 9 from FCP, has opened the program from Premiere Pro and created a new project file. Then she dragged the files, .mxf per season per show in the Premiere Pro project file. To organize additional files in labels and others per show per season, she decided to redo the project file. She highlighted the files on the window of Premiere Pro and click on delete. She then tried to repeat the move but this time, the program could not read the file type extension. One of our Publisher checked raw materials of the external hds but unfortunately the files is no longer there. Our question is how it happened because according to her, there is no prompt that it will be deleted in the external source files. Please help so that we can avoid it in the future. Hoipng for your immediate response. Thank you

  First does not remove the files. The option to delete files from the hard drive only appears when you perform offline files in the first project window.

  The editor is sure that she has deleted the files in the window of Premiere project and not on the hard drive itself?

  >>

  Better is not not to drag but to import or to ingest via Media Browser in the first.

  I'm guessing she files deleted from the hard drive.

• Best practices for creating a new project from an existing WebHelp

  I am currently working to WebHelp Pro (version RH is 9.0.2.271).

  I have a WebHelp project that currently supports the 2012 version of one of our projects. What I had to do was to create a separate project for 2013, using files of 2012 as a starting point. I couldn't find a way in HR to create a new project by importing an existing project of WebHelp, so I copied the files of 2012 in a new directory, open the project and renamed it.

  What drives this issue is that, as a result of this exercise, all seemed well, for once. However, I recently had to create new topics in the 2012 version. However, when I imported these subjects to the 2013 and compiled project, they disappeared - even if the htm files still appear in the appropriate folder of the file 2013 (when we look at with Windows Explorer).

  After reading a few posts on the forum, I thought I might have corrupted my database by creating the incorrectly the new project-, but if what I've done, it's the wrong way to go about this, I don't know what is the right way. I will be grateful for any suggestion.

  The easy way to do this is to create a copy using Windows Explorer.

  Open the project and click file > rename.

  Then you have your project is ready in 2013.

  See www.grainge.org for creating tips and RoboHelp

  

  @petergrainge

• Creating a new project in 24 p: 24 p conversion method

  Hello

  I created a new project from scratch in 24 p.  I made sure that my settings were appropriate to my configuration, i.e. DLSR 24 p and much more.

  All shows I work now, from below in 24 1920 x 1080 p on my screen of information.   Cool.

  

  However, when I set up my new default values of the sequence, I get this option box slightly confused displayed below for my reading settings:

  

  Is it true that "24 p conversion method" mentioned in my playback settings in the default values of the sequence made reference to how any interlaced video I will be converted in the 24 p format?

  Thank you

  Matt Dubuque, 100 trees

  Is it true that "24 p conversion method" mentioned in my playback settings in the default values of the sequence made reference to how any interlaced video I will be converted in the 24 p format?

  No, it dictates how material 24 p will be displayed on a device of 29.97 standard play, such as a TV or monitor that displays your output from the program monitor via a 1394 device (FireWire, alias). This is only for external monitoring; It has no effect on internal (i.e., in the program monitor) reading.

  The result is that, unless you are using a connected DV equipment and the monitor, you can ignore this setting.

• I can't create a new project of film since 10.1.2 update.

  I can't create a new project of film since 10.1.2 update. The 'Project' tab if I select "new project_film", nothing happens. Creating a factory trailer...

  Update: it works with a separate administrator account and iMovie another Instance: s any idea, what could be the problem. New Installation has not fixed it... :-( Anyone know a few things to check or change?

  THX!

• IMovie 10.1.1 don't update or create a new project/trailer

  I've recently updated to iMovie 10.1.1. Since then, iMovie will not create any new projects or trailers. Anyone know why?
  It also doesn't let me upgrade to 10.1.2!

  Since then, iMovie will not create any new projects or trailers. Anyone know why?

  What happens when you try? Error messages?

  It also doesn't let me upgrade to 10.1.2!

  iMove 10.1.2 requires OS X 10.11.2 or newer. What you have installed?

  And Spotlight must see installed iMovie.  Is installed in your Applications folder and called iMovie?

• CF does not show the timeline, the preview window, and it is impossible to create a new project

  Dear Apple Support,

  I bought my MacPro in France so my Final Cut is also in French. I went into the settings and remove all languages except English. It worked, but today when I tried to delete a, my Final Cut showed no chronology, the preview window and all the rest. The only thing it shows - the library. It is impossible to create a new project - the program stops.

  I extremely need my CF!

  Thank you very much!

  Anastasia

  anastasialarina wrote:

  I went into the settings and remove all languages except English. It worked, but today when I tried to delete a more

  What did you deleted?  Looks like you have deleted all languages including English.

  Maybe just reinstall the app.  She is in a language other than the OS, you can try

  http://www.TJ-HD.co.uk/en-GB/languageswitcher/

• Crash when creating a new project FPGA cRIO

  When I want to create a new project with the wizard FPGA cRIO, Labview freezes and blocks ("development system Labview 8.6 had ceased to function".) The wizard detects my cRIO-9073 integrated controller, but when he tries to discover the CompactRIO chassis, the program hangs and stops automatically.

  

  In MAX, there is no problem discovering the FPGA chip in the cRIO-chassis (RIO0)...

  

  I tried to use the new FPGA Project Wizard in Labview 8.5. While searching for the cRIO chassis, the program does not freeze, but he says the cRIO-chassis cannot be found...

  

  When I want to manually select the chassis, I can only choose for the cRIO-9072 and cRIO-9074. There is no cRIO-9073-icon...?

  

  What I am doing wrong, or is this a bug?

  Kind regards

  Kenneth

  
  

• Unable to create the new project Windows Digital Image in 2006.

  Original title: Digital Image 2006 Windows?

  My operating system is Windows XP SP3.  I have installed Windows Digital Image 2006 but when I clicked on "create a new project" he has opened with a page containing a red X, calendar, frog and a butterfly, and I was unable to go further.  It is a good editing software, but I would like to be able to use all the facilities.

  If someone familiar with this program, please indicate what could be the problem and how I might be able to correct even.

  Thank you.

  Look at the link here because it says Microsoft Digital Image 2006 is not compatible with Windows 7.
  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/search.aspx?l=en-us&type=software&s=Windows%20Digital%20Image%202006

  If the program is not compatible, then you try to install and run the program in compatibility mode.
  Use the following steps:
  (1) right click on the program
  2) click Properties
  3) click on the Compatibility tab
  (4) select run this program in compatibility mode and select Windows Vista or other operating system, the program has been run successfully.

  Check out the link here: make sure to run older programs in this version of Windows
  http://Windows.Microsoft.com/en-us/Windows7/make-older-programs-run-in-this-version-of-Windows

  If compatibility is not successful, then try and run the program compatibility problems:

  If you are running Windows 7 Professional or Ultimate version, install Windows Virtual PC and Windows XP mode (http://www.microsoft.com/windows/virtual-pc/default.aspx) and run your software in Windows XP.

  If you run Windows 7 Home Premium, try VirtualBox (www.virtualbox.org) or VMware Player (www.vmware.com), or any other 3rd party software virtualization and install a separate copy of Windows XP (family or professional edition) for this purpose. You can find the virtualization software free that will run on Windows 7 Home Premium.

  Thank you

  Marilyn

• Unable to create the new project for the new society without existing systems

  I'm unable to create a new project for a new society.   There is no existing systems, and I can't go beyond the selection screen.  I first put in place a new collector, registration of the database and start collections?  Or y at - there a step I'm missing?

  I found my problem.  I've been using Firefox.  This works fine in IE.  Problem solved.

• For first 14 Elements. I can't stabilize a 2, 7 K GoPro video: error message ' video size & project is not compatible. " Create a new project.

  For first 14 Elements. I can't stabilize a 2, 7 K GoPro video: error message ' video size & project is not compatible. " Create a new project. Project automatically implemented by Adobe settings is 4K. Which the project settings to choose for a 2.7 K 25 fps?

  [title published by mod]

  Do not rely on such update. 2.7 K is not an ordinary resolution.

  You can import 2.7 K in ss14, you can't stabilize.

  First Pro CC 2015 to do this.

  But if 2.7 K files are introduced into a sequence of 1920 x 1080 you have the same problem, but this problem is corrected by nesting the images first.

• How to create a new project with other page with the new version of Muse layouts?

  Hello
  If someone would continue to operate as before with the inadmissible Muse version... is - this posible to have both versions installed? or how to create a new project with other page with the new version of Muse layouts?
  Or how to download third party) 3 different configurations (desktop/tablet/mobile) under the same url with a clean result, like up yet with the Muse does not?

  Thanks for any help,

  Patrick

  Use the new version! What you want to achieve, will work! Go to the 'Page' menu and choose 'Add another Layout' and the missed buttons are in plan view.

• All the elements menu of AE are low and I can't create a new project.

  The project window is supposed to be some upward when I start AE, but it's not. All the elements menu of AE are low and I can't create a new project. I am a new user of AE and confused. Can you help me? Thank you!

  You launched the render node and not the full version of the software.

• My project will not move past slide 7.  I created a new project using a ppt presentation and the porject won't move past slide 7 even in preview.  Help?

  My project will not move past slide 7.  I created a new project using a ppt presentation and the porject won't move past slide 7 even in preview.  Help?

  I was pulling the presentation ppt to a network drive, so he didn't fully assume.  I saved the presentation on my desk and imported again and it worked fine.

• When you create a new project, the "new sequence settings" step doe appears not automatically, what to do?

  Hello

  I have a question I make videos of product for a company that they would do that to me in a 16:9 format and in HD. Because they do not know on which channels they want to publish, but it is certain that they will publish on youtube I wanted to do it in the settings HDV and DVCPRO HD 720 p 24 or even 1080 p 24. I bought the license to create online and for some reason that I don't have the option at the beginning when I create a new project to change the settings for the sequence. They do not appear, and then I can not change. Guys do you have any idea what can be done in order to access this setting before the project opens in the end?

  I'd appreciate strongly any help in this matter!

  See you soon,.

  Mascha

  This option is no longer available in the current versions of first. Once you click OK in the new project dialog box, you can then create some sequences that you like new sequence in the dialog box. You can also return to any order and change them through the sequence settings.

• When I create a new project, why the project tab not appearing?

  After starting the tutorial on the Eagle, then create a new project, why not the project tab appears in the lower-left corner of the screen? Only the effects Media Browser Info and history tabs markers appear? As in this screenshot - please help? Thank you very much!

  Post edited by: hugoclifford

  Try resetting the workspace.