Create a Proxy Service based on WSDL.

Similar Questions

• Creating the proxy service

  When I create the proxy service and choose to be created from the WSDL, I have two options for selection of the port and binding, could explain the difference in choosing between the port or binding?

  Thank you!

  This might help... Configuration of the Proxy Services and Business Services

• Failed to create the Proxy service with transport JCA

  Hello everyone.
  I have some questions when trying to create the ftp with jca transport service. I followed the instructions in this tutorial:
  http://blogs.Oracle.com/MarkSmith/entry/osb_and_ftp_adapter_in_11g
  
  I stuck at step 4, cannot create proxy service to use JCA file I created by JDeveloper 11 g (11.1.1.5). When I specify the file of jca proxy service, an error message returned:

  <ALSB Console> <BEA-494002> <Internal error occured in OSBConsole : Transport exception occurred with the following message:
  Invalid JCA file for JCA proxy service. If you are creating a Proxy from a Business Service, please select a different transport type (for example, http). If not, JCA file must contain JCA activation spec properties.

  And here's my content created by JDeveloper jca file:
  

  <adapter-config name="myJCA_FTP_service" adapter="FTP Adapter" wsdlLocation="myJCA_FTP_service.wsdl" xmlns="http://platform.integration.oracle/blocks/adapter/fw/metadata">
    
    <connection-factory location="eis/ftp/MyFtpAdapter"/>
    <endpoint-interaction portType="Put_ptt" operation="Put">
      <interaction-spec className="oracle.tip.adapter.ftp.outbound.FTPInteractionSpec">
        <property name="PhysicalDirectory" value="/home/FTP-shared/upload"/>
        <property name="FileType" value="ascii"/>
        <property name="Append" value="false"/>
        <property name="FileNamingConvention" value="osb_%SEQ%"/>
        <property name="NumberMessages" value="1"/>
      </interaction-spec>
    </endpoint-interaction>
  
  </adapter-config>

  Is there someone who had attempted to use JCA adapter Ftp transport already? Please give me a suggestion.
  Any response is appreciated
  
  Best regards, Cuong Pham

  If you have selected the operation PUT you can only generate a business of the JCA service.

• access to the original inside the proxy service message

  I have the proxy (serviceType = Web Service, WSDL) service that is available to the client endpoint and I want to record the incoming message to the file on the disk. However, I want to persist any incoming message exectly (at the byte level) as it was sent by the sender (so with the envelope).
  Inside of the proxy service I have access to variables such as header, body etc. However, they are not good for my purpose because they differ from the corresponding parts of the original message. For example xmlns:soapenv = namespace "http://schemas.xmlsoap.org/soap/envelope/" in the original message
  defined only at the level of the envelope and not the header or body. But in the header and body available inside the proxy service variables they (namespaces) are visible. Mayby there are more differences, but this one is visible at a time.
  It is therefore possible to access (in order to save it) original message somehow? Any magical variable? Or mayby there is a way of saying the osb to be persisted (incoming query) in file? (it would be enough for me (of course I need file name).) I manage file by myself more far away).
  All advice appreciated

  If you choose the type of service that WSDL based or service of any SOAP, then OSB motor deconstruct the incoming SOAP envelope and complete parts of the envelope (header, body etc) to automatically correct context variables. This occurs before the flow of messages of proxy service is initiated, so you can't do anything. In the proxy service, you will receive the deconstructed only SOAP message.
  If you wish to record the exact message that has been received by the OSB, then change the type of service to (or create another proxy service in front of the existing proxy) type Messaging with text or binary content. Or you can also choose AnyXML service type, in which case the incoming SOAP envelope will be available inside variable $body in mail flow.

• Error when creating a Web Service reference. ORA-29273: HTTP request failed ORA-12535: TNS:operation expired

  I have a need to call a web service from an APEX application, so I thought I'd try to experience everything first call a web service that is accessible to the public from W3Schools.  The URL of the WSDL that I use is:

  http://www.w3schools.com/webservices/TempConvert.asmx?WSDL

  The 1st thing I try in APEX is to create a Web Service based on the above URL reference.  Problem is that I get the following error:

  ORA-29273: HTTP request failed ORA-12535: TNS:operation expired

  Any ideas?

  I even tried with some other URL WSDL and always the same exact error.

  Thanks in advance.

  Hello

  Maybe your database server have firewall that blocks to internet connection?

  Kind regards
  Jari

• How to create a Web services to an external service and deploy to weblogic

  Hello
  
  I am trying to create a Web service for the wsdl
  http://ABR.business.gov.au/abrxmlsearch/ABRXMLSearch.asmx?WSDL
  who will help me to validate the number of the NBA.
  
  And I would like to create a war file and deploy it to a weblogic server,
  But the server is running behind the firewall,
  I could run the webservice of jdeveloper, but when deploy us in weblogic server
  the Web service does not work,
  
  We need to give the parameter in the Web service itself or the proxy details must exist in the weblogic proxy server?
  
  Thank you.
  
  With respect,
  Kali.
  OSSI.

  Kali,

  IMO, it would be preferable to apply the proxy settings on a global scale.

  I can't see a specific proxy settings page on my weblogic instance. Perhaps, you must add the properties of the JAVA virtual machine directly in the weblogic startup script.

  Edit: For a server JVM Arguments can be configured in the WLS console-> choose the server and go to Configuration-> start server.

  Published by: BijeshKrishnadas on October 18, 2010 21:01

• Cannot create the web service proxy in jdeveloper

  Hi all
  
  I'm unable to create a proxy web service by using the URL of the web service (https://domains.live.com/service/managedomain2.asmx?wsdl). I get an error saying "no WSDL not could be found. I am able to open the same URL in the browser. As the web service is secured by SSL, do I need to add anything on the jdeveloper to access this web service? Help, please
  
  
  Note: The web service must be called on https
  
  -MJ

  Hello

  The parameters are the proxy settings that are necessary for JDeveloper to connect to external sites - other than those available in the internal intranet.
  To connect to internet/external sites, you must have for this parameter. Here, as you try to connect to the external site - Windows live, you will need these settings.

  Thank you
  Nini

• How to create dynamic Services based on VMware files

  Hello

  We would like to create as many services as VMware folders in VMware, so whenever we will be add/remove any computer file VMware virtual of the service components will also be day/follow-up...

  We check the option "Create a rule to include a group of components" in the function Builder, and adding the conditions of rule as:

  ! VFolder where name like ''.

  But the result is not successful, because we are unable to choose the right component that inherites the VFolder type components...

  The same works of query in the "Script Console" and the children of the property spreads with all virtual machines...

  Any ideas?

  Thank you.

  Hi Eneko

  One of our systems Consultants found a carton of community that creates dynamic records VMWare-based services. I have attached the cartridge and I included some comments from the author, Thomas Bryant.

  I am pleased to announce the release of version 1.0 of a cartridge personalized for VMware files.  I had a lot of customers ask me to automatically build services in vFoglight based on the structure of folders in vCenter, and that is exactly what will make this cartridge!  This cartridge contains a rule that runs once per hour and will create a category called files VMware services and then for each vCenter, the data center and the series of records, create services and add virtual machines to each, as in vCenter.  Simply load the cartridge and wait about 30 to 60 seconds depending on the number of files you have, and then services will be created.  Please let me know if things work, good or bad.

   

  Updated - Version 1.0.1 released

  The update fixes a problem with the sort order of the structure "Virtual Machines and templates" vs "Hosts and Clusters" and the following files which were not created properly.

   

  Known issues - currently will not remove a service based on a folder that has been deleted from vCenter.  I'll look to add this in the next version.

  One last thing. After you install the cartridge, a new rule, named Custom - create/update records VMware will be added under VMware_Folders cartridge. If edit you it and look at the Conditions & Actions tab, you should be able to see the groovy script that is used to create and populate the services. Here, you should be able to edit the prefix added to each folder in Foglight. By default, the prefix is "Folder_.

  I hope that this solution is satisfactory for you,

  Kind regards

  Gaston.

• OSB: Mail Proxy Service retrieve only the xml message that has of the

  Hi all.
  I have a Service Proxy with the type of Messaging Service that read xml from a message queue.
  Type of Message in the proxy request is xml and I have provided the type information by stating (in the element and the type of field), the XML schema for the XML document type exchanged.
  
  I need the service proxy to retrieve xml messages that have the appropriate schema from the queue.
  
  But when the proxy retrieves a msg of xml in the queue independently of their schema definition.
  
  Appreciate your comments.
  
  THX,
  Ross
  
  Published by: user6677631 on February 25, 2013 09:52
  
  Published by: user6677631 on February 25, 2013 10:02

  Select the XML schema for the type of query in a messaging proxy does not entering from the schema XML message validation. Similarly, if you create a proxy based WSDL validation against definition WSDL only will not happen automatically. Choose XML as the message type only will ensure that all XMLs malformed will be rejected before entering the flow of messages. For validation against the schema, you need to explicitly add an action to validate in the proxy mail flow, if the validation fails triggers an error and get back the message to the queue or save the wrong message and commit the post/message to a queue of the error.

• Create the web service for foreign service composite of soa

  Hello

  only a few things to know.

  Worth better tick: copy wsdl and its dependend in the project artifacts?

  Which option to choose in Participation of the Transaction?

  Tryng to create a Web service to call a service proxy on OSB.

  Thank you.

  Fairlie

  Fairlie,

  Here you can find details on the transaction of participation parameter values - http://docs.oracle.com/cd/E25054_01/dev.1111/e10224/sca_bindingcomps.htm.

  This setting basically said if the appeal service should participate in the transactions of the process (if there is). If you want to keep the transactionality between the process and the OSB service, you'd better direct soa user liaison who takes in charge transactions. If you the OSB is transactionless, you can leave it blank.

  With respect to the WSDL, I would avoid the copy, but you should interest you when you deploy your process between different environment, for example, test, and production. In this case, you provide the configuration level to replace the URL of the WSDL for production test.

  See you soon,.

  Anatoli

• Error while trying to generate the Proxy Services on OSB

  Hello

  I am developing some services on OSB, every service call stored procedures using a database of JCA adapter.

  I followed this tutorial:

  https://guidoschmutz.WordPress.com/2010/08/08/Oracle-service-bus-11g-and-DB-adapter-a-different-more-integrated-approach/

  Business service are ok, they work fine, I tested it directly from OSB.

  Problems when trying to generate the proxy service.

  The General configuration of the proxy after set the source of the wsdl and when I specify jca file proxy service, an error message returned:

  "Unable to update JCA transport invalid JCA proxy service. Transport exception occurred with the following message:
Invalid JCA file for JCA proxy service. If you are creating a Proxy from a Business Service, please select a different transport type (for example, http). If not, JCA file must contain JCA activation spec properties."

  And here's my content created by JDeveloper jca file:

  
  

  < name of the adapter-config = "getApprover" = 'Database adapter' adapter wsdlLocation = "getApprover.wsdl" xmlns =" " http://platform.integration.Oracle/blocks/adapter/FW/metadata ">

  < connection-factory location = ' ist/DB/adapter' UIConnectionName = "Adapter" adapterRef = "" / >

  < endpoint-interaction portType = operation "getApprover_ptt" = "getApprover" >

  < className = "oracle.tip.adapter.db.DBStoredProcedureInteractionSpec interaction-spec" >

  < property name = "SchemaName" value = "APPS" / >

  < property name = "PackageName" value = "ERS_SKS_TASK_UTILITIES_NEW_PKG" / >

  < property name = "Procedurename" value = "GET_APPROVER" / >

  < property name = "GetActiveUnitOfWork" value = "false" / >

  < / interaction-spec >

  < output / >

  < / interaction of endpoint >

  < / adapter-config >

  
  

  Is there someone who had attempted to use the JCA transport with database adapter already? Please give me a suggestion.

  
  

  Thank you.

  Fairlie
  

  Hello

  In transport, changes in the Protocol on the proxy for local or http service.

• Message access control in the OSB proxy service when the Service Type is the Any SOAP Service

  Hello

  We have a proxy OSB service where the Service Type is 'no matter what SOAP Service'. We use Auth.xml to authenticate messages to achieve this proxy service.

  It is, ca we apply Message this proxy access control so that only user A is allowed to sent message has and only user B is allowed to message sent B?

  Us know if the proxy OSB service is based on a wsdl, then we can apply access control message for each operation in the Security tab - and thus specify which user can access the operation. But unfortunately, we have not a wsdl, because this service proxy is a proxy gateway and must accept any SOAP message reaches.

  For example, if the user name in the SOAP header is msgAUser, get is accepted.

  "< soapenv:Envelope xmlns:soapenv ="http://schemas.xmlsoap.org/soap/envelope/">"

  < soapenv:Header >

  "< xmlns:wsse wsse: Security ="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-secext-1.0.xsd">."

  < wsse: UsernameToken >

  < wsse:Username >msgAUser< / wsse:Username >

  < wsse:Password >msgApwd< / wsse:Password >

  < / wsse: UsernameToken >

  < / wsse: Security >

  < / soapenv:Header >

  < soapenv:Body >

  <Get>

  ...

  < /Get>

  < / soapenv:Body >

  < / soapenv:Envelope >

  If the user name in the SOAP header is msgBUser, then MessageB is accepted.

  "< soapenv:Envelope xmlns:soapenv ="http://schemas.xmlsoap.org/soap/envelope/">"

  < soapenv:Header >

  "< xmlns:wsse wsse: Security ="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-secext-1.0.xsd">."

  < wsse: UsernameToken >

  < wsse:Username >msgBUser< / wsse:Username >

  < wsse:Password >msgBpwd< / wsse:Password >

  < / wsse: UsernameToken >

  < / wsse: Security >

  < / soapenv:Header >

  < soapenv:Body >

  <MessageB>

  ...

  < /MessageB>

  < / soapenv:Body >

  < / soapenv:Envelope >

  Any suggestions please?

  Understood.

  My current client, we have faced the same problem and implemented a similar design which nevertheless has important benefits.

  The problem with proxy input all SOAP is not only in the complexities of authentication. Most important, resources fine grain (thread) management becomes impossible: proxy entry has a workmanager, one constraint of son max. If any single service behind entered proxy knows an influx of requests (because of a peak or a misconfigured customer), he eats the workmanager dry and the rest of the services become too inadmissible.

  In this spirit, we have implemented the following diagram. It's a little more complicated, but it serves us well for a few years already:

  EntryProxy 1-> Interceptor entering Proxy-> Proxy 1

  EntryProxy 2-> Interceptor entering Proxy-> Proxy 2

  ...

  Enter proxy doesn't do Nothing but shall forward the request for interception of incoming traffic. Power of Attorney of the entry, however, has its own WSDL, authentication and the workmanager which allows precise control.

  Another important aspect of a proxy of the entry, it is that it passes a custom header containing the name of the destination of the interceptor, e.g. TargetURI = "ProxyService/Paypal/Paypal.

  Incoming Interceptor Proxy performs all recording, the error handling and other common tasks.

  Then, according to the last header, the proxy of the interceptor makes a dynamic call to route to the specified destination.

  Yes, this design has an additional moving part - a proxy entry - but he a) works b) guard control all in our hands. The entry proxy is a very small point; When I need to make a new one, I just copy an existing one and replace the WSDL file and the value of the TargetURI - 30 seconds of work.

  Hope that helps.

  Vlad

  http://vladimirdyuzhev.com

• Error creating web proxy

  Hello
  
  I created a web service in the ProjectsManagement (jws) workspace. Now, I am trying to invoke that service of the ProjectsFinancialsEss (jws) workspace by creating a web-proxy. However, I get the following error when I create the web proxy:
  
  oracle.jdeveloper.webservices.model.WebServiceException: error creating the wsdl model
  "file:/ade/amrmishr_amr_feb12_03_v2/fusionapps/prj/components/projectsManagement/resourceManagement/reporting/model/src/oracle/apps/projects/resourceManagement/reporting/model/UpdateResourceUtilizationDataService.wsdl": no !/ in spec
  
  Please find the jDev below stack trace:
  
  oracle.jdeveloper.webservices.model.WebServiceException: Error creating model from wsdl "file:/ade/amrmishr_amr_feb12_03_v2/fusionapps/prj/components/projectsManagement/resourceManagement/reporting/model/src/oracle/apps/projects/resourceManagement/reporting/model/UpdateResourceUtilizationDataService.wsdl": no !/ in spec
  at oracle.jdeveloper.webservices.model.java.JavaWebService.createPortTypes(JavaWebService.java:1635)
  at oracle.jdeveloper.webservices.model.WebService.createServiceFromWSDL(WebService.java:2846)
  at oracle.jdeveloper.webservices.model.WebService.createServiceFromWSDL(WebService.java:2611)
  to oracle.jdeveloper.webservices.model.java.JavaWebService. < init > (JavaWebService.java:509)
  to oracle.jdeveloper.webservices.model.java.JavaWebService. < init > (JavaWebService.java:461)
  to oracle.jdeveloper.webservices.model.proxy.WebServiceProxy$ ProxyJavaWebService. < init > (WebServiceProxy.java:2268)
  at oracle.jdeveloper.webservices.model.proxy.WebServiceProxy.updateServiceModel(WebServiceProxy.java:1701)
  at oracle.jdeveloper.webservices.model.proxy.WebServiceProxy.setDescription(WebServiceProxy.java:525)
  at oracle.jdevimpl.webservices.wizard.jaxrpc.proxy.ProxyJaxWsSpecifyWSDLPanel.setDescription(ProxyJaxWsSpecifyWSDLPanel.java:238)
  at oracle.jdevimpl.webservices.wizard.jaxrpc.common.SpecifyWsdlPanel.buildModel(SpecifyWsdlPanel.java:1109)
  to oracle.jdevimpl.webservices.wizard.jaxrpc.common.SpecifyWsdlPanel$ 5.run(SpecifyWsdlPanel.java:661)
  at oracle.ide.dialogs.ProgressBar.run(ProgressBar.java:655)
  at java.lang.Thread.run(Thread.java:619)
  Caused by: oracle.jdeveloper.webservices.tools.WsdlValidationException: Error creating model from wsdl "file:/ade/amrmishr_amr_feb12_03_v2/fusionapps/prj/components/projectsManagement/resourceManagement/reporting/model/src/oracle/apps/projects/resourceManagement/reporting/model/UpdateResourceUtilizationDataService.wsdl": no !/ in spec
  at oracle.jdevimpl.webservices.tools.wsa.WsaAdaptor.newWsdlValidationException(WsaAdaptor.java:825)
  at oracle.jdevimpl.webservices.tools.wsa.WsaAdaptor.getSeiInfo(WsaAdaptor.java:515)
  at oracle.jdeveloper.webservices.tools.WebServiceTools.getSeiInfo(WebServiceTools.java:523)
  at oracle.jdeveloper.webservices.model.java.JavaWebService.getSeiInfo(JavaWebService.java:1741)
  at oracle.jdeveloper.webservices.model.java.JavaWebService.createPortTypes(JavaWebService.java:1496)
  ... 12 more
  Caused by: oracle.j2ee.ws.common.tools.api.ValidationException: Error creating model from wsdl "file:/ade/amrmishr_amr_feb12_03_v2/fusionapps/prj/components/projectsManagement/resourceManagement/reporting/model/src/oracle/apps/projects/resourceManagement/reporting/model/UpdateResourceUtilizationDataService.wsdl": no !/ in spec
  at oracle.j2ee.ws.tools.wsa.jaxws.JaxwsWsdlToJavaTool.getJAXWSModel(JaxwsWsdlToJavaTool.java:679)
  at oracle.j2ee.ws.tools.wsa.WsdlToJavaTool.createJAXWSModel(WsdlToJavaTool.java:478)
  at oracle.j2ee.ws.tools.wsa.Util.getJaxWsSeiInfo(Util.java:1360)
  at sun.reflect.GeneratedMethodAccessor1137.invoke (unknown Source)
  at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
  at java.lang.reflect.Method.invoke(Method.java:597)
  to oracle.jdevimpl.webservices.tools.wsa.Assembler$ $2 1.invoke(Assembler.java:218)
  to $Proxy90.getJaxWsSeiInfo (Unknown Source)
  at oracle.jdevimpl.webservices.tools.wsa.WsaAdaptor.getSeiInfo(WsaAdaptor.java:505)
  ... 15 more
  Caused by: oracle.j2ee.ws.common.tools.api.ValidationException: no! / in spec
  at oracle.j2ee.ws.tools.wsa.SchemaTool.genValueTypes(SchemaTool.java:188)
  at oracle.j2ee.ws.tools.wsa.jaxws.JaxwsWsdlToJavaTool.getJAXWSModel(JaxwsWsdlToJavaTool.java:662)
  ... 23 more
  Caused by: oracle.j2ee.ws.common.databinding.common.spi.DatabindingException: no! / in spec
  at oracle.j2ee.ws.common.tools.databinding.jaxb20.JAXB20TypeGenerator.generateJavaTypes(JAXB20TypeGenerator.java:124)
  at oracle.j2ee.ws.tools.wsa.SchemaTool.genValueTypes(SchemaTool.java:186)
  ... 24 more
  
  Any help on this will be greatly appreciated.
  
  Thank you and best regards,
  Amrit

  Watch as you hit 11838224 Bug that should be fixed in 11.1.2.x
  If you are unable to update you can use the following workaround:
  @ Workaround details
  @ =====================
  @ Deploying the model project and build the proxy from the wsdl of the
  10.3.x.0 @ WLS server.

  Timo

• How the proxy service can get the client certificate in Oracle Service Bus

  Hello everyone, now I'm confused in how can get service proxy client certificate in Oracle Service Bus. I have configured bidirectional SSL in Weblogic, the client sends its cerficate to Weblogic and Weblogic checks this cerficate if have access permissions Weblogic, but my proxy service cannot obtain this certificate to do more work, who can help me?
  And my proxy service service type is the messaging service.
  
  Thank you!!!
  Sea

  Hi, if you have configured for client certificate authentication, weblogic maps an attribute in the DN of the client certificate to a user of weblogic security realm. The attribute is controlled by the default configuration to map the user in the default identity asserter in the WLS Console--> security--> kingdoms--> suppliers--> default identity Asserter. Generally, the CN attribute is selected for this purpose. You must also create a user in the security field, with the value of this attribute in the client certificate for authentication to succeed. Once the authentication is successful, the user is used as the authenticated user. So if you want to set permissions for authorization on the proxy, you can do it based on this user. For this you need not the certificate of the client. In the pipeline of message, I guess you can get the authenticated user of $inbound, which in turn corresponds to an attribute in the DN of the client certificate.

• Why is my proxy service returns the request as a reply message?

  Hi all
  
  I have a business service that inserts a record into DB and returns no response. So, I created a service proxy with custom WSDL file and forward the request to the company. And in my custom WSDL file I have different inputs and outputs, but when I call the proxy service I always get the message request an answer!
  What I am doing wrong?
  
  Here are the files:
  
  -----
  WSDL file

  <wsdl:definitions
  targetNamespace="http://xmlns.oracle.com/pcbpel/adapter/db/SMSService/InsertSMSRecord/ProxyService"
  name="SMSProxyService-concrete"
  xmlns:wsdl="http://schemas.xmlsoap.org/wsdl/"
  xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/"
  xmlns:sms="http://xmlns.oracle.com/pcbpel/adapter/db/InsertSMSRecord"
  xmlns:tns="http://xmlns.oracle.com/pcbpel/adapter/db/SMSService/InsertSMSRecord/ProxyService">
       <wsdl:types>
            <xsd:schema xmlns:xsd="http://www.w3.org/2001/XMLSchema">
                 <xsd:import
                      namespace="http://xmlns.oracle.com/pcbpel/adapter/db/InsertSMSRecord"
                      schemaLocation="../DBAdapter/InsertSMSRecord/xsd/InsertSMSRecord.xsd">
                 </xsd:import></xsd:schema></wsdl:types>
       <wsdl:message name="InsertSMSRecordInput_msg">
            <wsdl:part name="SMSRequestBody" element="sms:SMSRequest"/>
       </wsdl:message>
       <wsdl:message name="InsertSMSRecordOutput_msg">
            <wsdl:part name="SMSResponseBody" element="sms:SMSResponse"/>
       </wsdl:message>
       <wsdl:portType name="InsertSMSRecord_ptt">
            <wsdl:operation name="sendSMS">
                 <wsdl:input message="tns:InsertSMSRecordInput_msg"/>
                 <wsdl:output message="tns:InsertSMSRecordOutput_msg"/>
            </wsdl:operation>
       </wsdl:portType>
       <wsdl:binding name="sendSMS-binding" type="tns:InsertSMSRecord_ptt">
            <soap:binding style ="document" transport="http://schemas.xmlsoap.org/soap/http"/>
            <wsdl:operation name="sendSMS">
                 <soap:operation soapAction="sendSMS"/>
                 <wsdl:input>
                      <soap:body use="literal" parts="SMSRequestBody"/>
                 </wsdl:input>
                 <wsdl:output>
                      <soap:body use="literal" parts="SMSResponseBody"/>
                 </wsdl:output>
            </wsdl:operation>
       </wsdl:binding>
       <wsdl:service name="InsertSMSRecord-service">
            <wsdl:port name="InsertSMSRecord-port" binding="tns:sendSMS-binding">
                 <soap:address location="http://localhost:7001/SMSService/Proxy_Services/sendSMS"/>
            </wsdl:port>
       </wsdl:service>
  </wsdl:definitions>

  -----
  File InsertSMSRecord.XSD

  <?xml version = '1.0' encoding = 'UTF-8'?>
  <xs:schema
  targetNamespace="http://xmlns.oracle.com/pcbpel/adapter/db/InsertSMSRecord"
  xmlns="http://xmlns.oracle.com/pcbpel/adapter/db/InsertSMSRecord"
  elementFormDefault="qualified" attributeFormDefault="qualified"
  xmlns:xs="http://www.w3.org/2001/XMLSchema">
     <xs:element name="SMSRequest" type="SMSRequestType"/>
     <xs:complexType name="SMSRequestType">
        <xs:sequence>
           <xs:element name="SYSTEM_ID" type="xs:string" nillable="false"/>
           <xs:element name="USER_ID" type="xs:string" nillable="true"/>
           <xs:element name="PRIORITY" type="xs:int" nillable="true"/>
           <xs:element name="MESSAGE" type="xs:string" nillable="false"/>
           <xs:element name="MOBILE" type="xs:string" nillable="false"/>
           <xs:element name="LANGUAGE" type="xs:string" nillable="false"/>
           <xs:element name="SHORT_CODE" type="xs:string" nillable="true"/>
        </xs:sequence>
     </xs:complexType>
     <xs:element name="SMSResponse" type="SMSResponseType"/>
     <xs:complexType name="SMSResponseType">
        <xs:sequence>
             <xs:element name="Status" type="xs:string" nillable="true"/>
             <xs:element name="errorType" type="xs:string" nillable="true" minOccurs="0"/>
             <xs:element name="errorDescription" type="xs:string" nillable="true" minOccurs="0"/>
        </xs:sequence>
     </xs:complexType>
  </xs:schema> 

  -----
  
  And here is a sample of the input and the output I get:*.
  -----
  Entry

  <soapenv:Envelope
  xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/"
  xmlns:ins="http://xmlns.oracle.com/pcbpel/adapter/db/InsertSMSRecord">
     <soapenv:Header/>
     <soapenv:Body>
        <ins:SMSRequest>
           <ins:SYSTEM_ID>sfda</ins:SYSTEM_ID>
           <ins:USER_ID>test</ins:USER_ID>
           <ins:PRIORITY>5</ins:PRIORITY>
           <ins:MESSAGE>test</ins:MESSAGE>
           <ins:MOBILE>966503105515</ins:MOBILE>
           <ins:LANGUAGE>ENGLISH</ins:LANGUAGE>
           <ins:SHORT_CODE>SFDA</ins:SHORT_CODE>
        </ins:SMSRequest>
     </soapenv:Body>
  </soapenv:Envelope>

  -----
  Output

  <soapenv:Envelope
  xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/"
  xmlns:ins="http://xmlns.oracle.com/pcbpel/adapter/db/InsertSMSRecord">
     <soapenv:Header/>
     <soapenv:Body>
        <ins:SMSRequest>
           <ins:SYSTEM_ID>sfda</ins:SYSTEM_ID>
           <ins:USER_ID>test</ins:USER_ID>
           <ins:PRIORITY>5</ins:PRIORITY>
           <ins:MESSAGE>test</ins:MESSAGE>
           <ins:MOBILE>966503105515</ins:MOBILE>
           <ins:LANGUAGE>ENGLISH</ins:LANGUAGE>
           <ins:SHORT_CODE>SFDA</ins:SHORT_CODE>
        </ins:SMSRequest>
     </soapenv:Body>
  </soapenv:Envelope>

  -----
  
  Any help is appreciated...
  Thank you...

  In fact, this is how it works. You will need to replace the contents of $body with the XML response necessary. OSB returns the contents of $body as at the end of the treatment.

  . / * means everything inside the current node. So, if you specify 'body' in the variable field, then. / * means everything inside the variable 'body '.

  Kind regards
  Anuj