Create a report of user showing your comments

Similar Questions

• How to create a report that will show us the hierarchical structure

  Hi all
  
  I use studio financial reporting for reports.
  I have a planning application. And I used areas such as the entity Dimension.
  
  Now, I am creating a report of users to see my hierarchy of dimension entity.
  Something like areas
  East
  West
  North
  South
  
  I'm able to generate the report, but the hierarchy of areas does not appear...
  
  Can someone advice if there is an option in the preparation of financial reports to make more visible the hierarchical structure by adding a correct indentation between the parent and child?...
  
  And Yes, I used a prompt for the entity in the report...
  
  Thank you

  You could add indentation around the lines of formatting.

  1. Select the line
  2. Select Format
  3. click on the tab of allignment
  4. set a number for the indentation.

  Good luck!

• How to create the report in the following form?

  Hi all
  
  How I use studio EN to create reports.
  I want to create a report that will show me accounts and accounts of each entity, which means I want to keep the entity in the size of the page in the dimension of the line. The report should be done in such a way that if I take an entity in the dimension of the page then it will show a few accounts in the dimension line that
  are specific for this entity and in the same way, if I take another entity in the dimension of the page then it should show me another different set of accounts in
  the dimension of the row corresponding to this specific entity.
  How can I do this in my report?
  
  
  Thank you

  There are two ways that you can achieve this goal.

  You have never given in combinations of entity/account disabled? If this isn't the case, I would like to delete missing lines.

  Is there the potential for existing data in invalid combinations of entity/account, then I would create a specific account that defines the valid combinations. Think of it as a Boolean, a value of 1 for the valid combinations or 0 for invalid combinations. I would then use the 'Advanced Options' en to delete values based on this account.

  Hope this helps,
  -Jake

• A report that will show how a user has used the secure area?

  Hello everyone.

  I need to view a generated in the report on the activities of the Member section to securezone.

  The ideas are greatly appreciated.

  I've tried selecting the protected area (in the areas of Secure), click on action -> View Secure area usage report

  But it just displays: no data available for the period selected. no matter how to set the filter of time.

  Best regards

  Jones

  It seems that it is a duplicate to your message in this thread: is there a report that will show you how a user has used the secure area? . I will follow on this issue on the same thread.

• APEX4: How to create a report whose data are based on the date of entry of the user fields

  With the help of 4 Apex I create a report that allows the user to enter two dates and displays a report between the date range.
  
  How can I do this?
  
  Thank you.

  Go to Actions > filter in your IR and ther, you can create several conditions to filter your report.

  Denes Kubicek
  -------------------------------------------------------------------
  http://deneskubicek.blogspot.com/
  http://www.Opal-consulting.de/training
  http://Apex.Oracle.com/pls/OTN/f?p=31517:1
  http://www.Amazon.de/Oracle-Apex-XE-Praxis/DP/3826655494
  -------------------------------------------------------------------

• How to create the report of this style?

  Hello
  
  I have a problem when creat a report using obiee, this is a monthly report, the layout like calendar,.
  
  There is a quick baseed on the month, if I choose 201109, the report will be poster of daily sales and the number of customers in September.
  
  Every day have the sale and every day must be listed, first line display name of 7 days, second row shows sales and number of customer information,
  
  third row display name of 7 days, and all the following steps.
  
  1 sep | 2 sep | 3 sep | 4 sep | 5 sep | 6 sep | 7 sep
  Sales: sales: 10 sales: 10 sales: 10 sales: 10 sales: 10 sales 10,10
  : No.10 No.: No. 10: No. 10: No. 10: No. 10: 10 no: 10
  
  8 sep | 9 sep | 10 sep | 11 sep | 12 sep | 13 sep | 14 sep
  Sales: sales: 10 sales: 10 sales: 10 sales: 10 sales: 10 sales 10,10
  : No.10 No.: No. 10: No. 10: No. 10: No. 10: 10 no: 10
  
  15 sep | 16 sep | 17 sep | 18 sep | 19 sep | 20 sep | 21 sep
  Sales: sales: 10 sales: 10 sales: 10 sales: 10 sales: 10 sales 10,10
  : No.10 No.: No. 10: No. 10: No. 10: No. 10: 10 no: 10
  
  22 sep | 23 sep | 24 sep | 25 sep | 26 sep | 27 sep | 28 sep
  Sales: sales: 10 sales: 10 sales: 10 sales: 10 sales: 10 sales 10,10
  : No.10 No.: No. 10: No. 10: No. 10: No. 10: 10 no: 10
  
  29 sep | 30 sep
  Sales: sales 10: 10
  No: 10 no: 10
  
  Thank you! waiting for your response.

  So you're a user same as below:
  How to view the report by using the style of calendar in obiee

  Follow my instructions. Also, give a look at this http://bischool.wordpress.com/2010/10/22/calendar-view-in-obiee-and-applications/

  You can have dates instead of the name of the day, but you must ensure that your definition is very clear in your time dimension i.e. each week week 7 days. You table looks like his week to jump and you have each month as 30.31 or 28 days...

  Come and play and you're done... hope its helpful

• Get the error message "send and receive reported an error (0x800CCC92): your e-mail server rejected your login. '. Check your username and password in your account properties.

  Get the error message "send and receive reported an error (0x800CCC92): your e-mail server rejected your login. '.  Check your username and password in your account properties.
  I'm using Outlook 2002 on the XP Pro operating system.

  It lasts for almost a year, but I managed to work around the issue since it was started using a different outgoing SMTP user name and the password.  (More settings, outgoing server tab, log in using...)  Now it has stopped working.

  There are four machines at this place and all suffer from the same problem.  I use a LinkSys RVS4000 router.  The previous Linksys router has also had the same problem so I replaced, thinking he can correct the problem, he didn't.
  Troubleshooting:
  a. I am able to recreate the account on another machine to a different place and it works.
  b. I can take an account of my machine, create in this place and it will not work.
  c. accounts deleted and created a new, did not
  d. has replaced the router to the place with a new Linksys router
  e. contacted support for ISP, (Time Warner), they accuse the hosting company
  d. contacted support for hosting of the company (HostCentric) they blame the ISP
  c. confirmed username and passwords are correct.
  e. There are 4 machines in this place with different addresses.  All started having this problem/error the same day within hours
  f. may receive emails cannot be sent.

  http://expwinproblems.blogspot.com/2010/11/error-messages-in-Outlook-when-send-or.html

• Limit lines in an interactive report by USER ID or NAME

  I'm fairly new to Apex and very vey would appreciate your help. We currently use Aplicaiton Express 3.2.1. I'm trying to limit the display of the lines in an interactive report by USER ID in my APP_USERS table, which contains the following columns:
  
  APP_USERS
  
  NAME
  RID
  E-mail
  ROLE
  
  The table my interactive report based on includes the following columns:
  
  SC_TABLE
  
  MONTH
  NAME OF THE USE
  LM_NAME
  ETC... (numberical data columns)
  
  I use an authentication scheme that verifies users RID when you access my application of our work network.
  
  The process of information flow is the Manager of the line between data in a form and chooses his name in a LOV based on the APP_USERs table. Once submitted they can access the interactive report.
  
  My goal here is that, when a line Manager accesses the interactive report only the emplooyes rows that match their name in a column of the report OR their identity card of the APP_USERs iarereturned. So no superiors can see or modify other hierarchical employee information.
  
  I played adding SQL statements in the report area > Condition section but have not been able to come up with something that works. Any suggestions on how to implement this or tutorials you know that might help.
  
  Thanks for your help,
  
  Edited by: Ewaver February 11, 2012 15:21

  Ewaver wrote:

  My goal here is that, when a line Manager accesses the interactive report only the emplooyes rows that match their name in a column of the report OR their identity card of the APP_USERs iarereturned. So no superiors can see or modify other hierarchical employee information.

  I played adding SQL statements in the report area > Condition section but have not been able to come up with something that works. Any suggestions on how to implement this or tutorials you know that might help.

  This is known as Fine grain Access Control (FGAC) and is normally implemented using views or private virtual database (CAE) of Oracle functionality.

  If you are allowed to use an Enterprise Edition database and to apply these restrictions, through the entire application, or across multiple applications, then use of private virtual database (DPV), with the VPD security attribute in APEX application security attributes to set the settings in your application. (A somewhat outdated article on the use of VPD with APEX is available.)

  Should you not use EE, then you can roll your own VPD use parameterized views, once again using the security attribute VPD to set the context of the application.

  I'll put up a demo application. How can I make sure that you have access to my demo app?

  Create a developer of guest account in your workspace and after the workspace name and identification information sign in here.

• OBIEE reporting to users not OBIEE that are external to the SMTP server

  Hi all
  
  Nazza salvation,
  
  Would you please help me how send you ISID signals to users not OBIEE (external mails)?
  I configured the mail server and able to send reports for internal mail.
  
  I followed the following steps as mensioned in all blogs:
  1. I created a table with default column d called SA_SYSTEM_USER mensioned.
  2. any in the physical layer
  3 creates a view for model (Dual) table with column "DUMMY".
  4 joined these tables of towing made MODEL and SA_SYSTEM_USER as a Dimension about join a MODEL Email.
  5 renamed columnsfor as mensioned in Bolgs presentation table.
  6 restart the servers.
  7. I noticed the mail of the system and the system delivery profile created with a single email id (where are the other my table SA_SYSTEM_USER email ID?)
  8. but as written in Articles he never sends emails to external e-mails for example [email protected] (this is the email from existng in SA_SYSTEM_USER)
  
  I need an urgent solution please help me...
  
  Thank you very much...

  No, no, nothing is more required SMTP side if his performance of the iBots for IDS in-house.

  If you set up SA_SYSTEM correctly, you can send reports to users non-obiee as account gmail etc.

  Try steps below...

  1. create and save a report using your logon fields and the SA_SYSTEM EMAIL that contains the people you want to send the report. Or by email or logon information must be an OBIEE user that exists in the RPD.
  2. create an iBot and under the general tab, the visibility of the non custom data value and run as an administrator account.
  3. set the conditional query on the report you made in step 1.
  4. for recipients, check the box, "to determine the recipients of conditional query. The "column that contains recipients' must be set to 'connection '.
  5. If you want to save the ibot to a shared folder, and then check the box 'Release for subscription' no otherwise.
  6. choose your content delivery and all other options and ensure that planning is set on immediately if you want to get out immediately.
  7. Save and send to any email address that was on the parole request.

  ======================

• How to create a report in this style

  Hello
  
  I faced a problem with the display of reports in the dashboard.
  
  There is a prompt of the year, if I choose to 2010, the report will show sales of three years, namely 2009,2010,2011, given three years.
  
  as:
  
  2009 2010 2011 YEAR
  SALES 100 200 300
  
  and if I choose to 2009, it will display 2008,2009,2010, given three years.
  
  How can I achieve this requirement?
  
  waiting for your help, thank you!

  Here you go... Just blindly follow these steps and you're done.
  (1) create a command prompt of the year with variable presentation as pv_year

  (2) create a report saying report Mid year with selected 3 times column
  -Put a filter of pv_year presentation on the first column of the year with a default variable tell @{pv_year} {2008}
  -Rename the second time column say YEAR + 1 and change the fx to CAST (TIME_DIM. ("' YEAR ' AS INT) + 1
  -Rename the second time column say YEAR-1 and change the fx to CAST (TIME_DIM. ("' YEAR ' AS INT)-1
  Now when you run the report environment, this will give you a records whose value as 2008-2009-2007

  (3) create your main report with criteria such as pass year and measure
  -Change the fx for column year as CAST (TIME_DIM. ("' YEAR ' AS INT)
  -Now to put a filter on the year column with filter based on the results of another application and select them:
  Relationship = superior or equal to one
  Registered request = browse mi report
  Use the values of column = YEAR-1
  -Again, put a filter on the year column with filter based on the results of another application and select them:
  Relationship = less than or equal to one
  Registered request report Mid = browse (incase it does not select and select any other application first, then report Mid)
  Use the values of column = YEAR + 1

  This will select year > = 2007 AND year< =="" 2009.="" hence="" the="" results="" will="" be="" for="" year="">

  This will 100% work...
  http://i56.Tinypic.com/wqosgw.jpg

  See you soon

• Help to create a report

  Hello people I need help creating a report on 9i. So far:
  
  SELECT TRUNC(sampled,'MM'), c.name country, operator of o.name, SUM (SMS)
  TEST s, operators_info o, countries_info c
  "WHERE sampled > = January 1, 2010 ' AND sampled < 1 January 2011"
  AND s.dest_id = o.id
  AND o.country_id = c.id
  GROUP BY TRUNC (sampled, 'MM'), c.name, o.name
  ORDER BY 1, 2, 3;
  
  I get:
  
  01/01/2010 UK OPERATOR1 100
  01/01/2010 UK OPERATOR2 150
  01/01/2010 USA OPERATOR3 500
  01/01/2010 USA 0PERATOR4 650
  .
  .
  .
  02/01/2010 UK OPERATOR1 50
  02/01/2010 UK OPERATOR2 170
  02/01/2010 USA OPERATOR3 550
  02/01/2010 USA 0PERATOR4 670
  .
  .
  .
  12/01/2010 UK OPERATOR1 0
  12/01/2010 UK OPERATOR2 270
  12/01/2010 UK OPERATOR3 150
  12/01/2010 USA OPERATOR3 570
  12/01/2010 USA 0PERATOR4 800
  
  How can I create a more effective as report:
  
  ........................ 01/01/2010...01/02/10...01/12/2010
  UK OPERATOR1... 100.............50.............0
  UK OPERATOR2... 150... 170 270
  UK OPERATOR3... 150
  USA OPERATOR3.500...... 550 570
  USA 0PERATOR4.650... 670... 800
  
  Thank you very much in advance

  Hello

  This is called a Pivot , and this thread shows you how to do it:
  Help with a query add columns

  Rotate the output requires more work, it will be probably more effective than what you do now.

  I hope that answers your question.
  If not, post a small example data (CREATE TABLE and only relevant columns, INSERT statements), and the results you want from this data.
  Explain how you get these results from these data.
  Always tell what version of oracle you are using.

• Report do not show when the page is refreshing

  Hello
  
  I have a report of patient privacy and I have a column in the report at the end of TREATMENT DETAILS. When I click on DETAILS of TREATMENT and then move page command no 2. This page show me last visit treatment details report in a region and here I use the second area I add the current processing status. There is point four
  
  Checkbox name 1-disease
  2 - symptoms name box
  Checkbox name of 3 treatments
  medicine-4 Select name
  My first query of the region is

  select A.P_NO,A.P_NAME,B.DISEASE,B.SYMPTOMS, B.VISITING_DATE,B.TRET_NAME,B.MED_NAME,B.MED_COUNT FROM PATIENT_DETAILS A, PATIENT_SYMPTOMS B WHERE A.P_NO=B.P_NO AND A.P_NO =:REQUEST

  using these four point I fill in the details of current patient treatment and resend medicine by using select list but if he is NOT as medicine of Disprine salt; ECT list then add new drug I create a link when I click on this link then control will again page-3 and add new drug .but after submitting the new medicine and click on the "BACK" button then control access page - 2 and the treatment of the patients first region report do not show.
  
  I want to show this report when I click the back button on the page of no - 3.
  
  How can I do this...
  
  Thank you
  
  Published by: Ed on April 30, 2010 04:57
  
  Published by: Ed on April 30, 2010 04:58
  
  Published by: Ed on April 30, 2010 05:48

  Hi Maury,

  I changed your application and it's working now. The problem is, you set the number of patients at the request of page No - 7 when the link in the page no-6 is clicked. When you get back from page no-5 after the addition of medicine, demand comes from page no - 5 and it doesn't have the patient not inside, so the report query returns all the data.

  I added an item hidden in page 7 and I am the focus with the patient No. 6 and used page in the report query. The value of this element will not change until you change it or the session expires or you click on the link in the page no-6 for another patient. Hope this helps :)

  Thank you
  Machaan

• Procedure with THE parameters - creating a report

  I have the following procedure which is used in our applications (non-APEX) internal:
  

  PROCEDURE SelIssueActivityPublic (
                                              p_results           OUT     SYS_REFCURSOR,
                                              p_IssueID                    IN     ems.issue.issue_id%TYPE,
                                              p_TransactionID         OUT VARCHAR2
               ) 

  The body of the procedure made a lot of treatment and inserts data into an intermediate table. The cursor ON the parameter then returns a SELECT statement in the staging table. Since it is possible that this procedure be struck several times (several users), transaction ID is used to match the data in the staging table to demand appropriate. The procedure then deletes the data from the staging table. (I'll post if necessary, but it is quite long, and since it is used successfully in other applications, I don't think it relates to my question).
  
  Asked me to create a report of the APEX data generated by the procedure. I've never used a procedure with an OUT parameter to create a report. I was hoping to assign transaction ID to a variable hidden on the loading of the page and then use it to poplulate the report. I'm not interested in the OUT parameter slider, I wrote my own SELECT statement to retrieve the data from the staging table.
  
  I tried to create a page that did that - agenda: H_P19_TRANSID, before the header calculation = EMS. EMS_READER. SelIssueActivityPublic (: H_P19_CURSOR, 454551,: H_P19_TRANSID) [454551 is a test question id], but I get the following error:

  ORA-06550: line 1, column 43: PLS-00222: no function with name 'SELISSUEACTIVITYPUBLIC' exists in this scope ORA-06550: line 1, column 7: PL/SQL: Statement ignored flowComp=H_P19_TRANSID
   Error ERR-1030 Error executing computation expression.

  He seems to think that SelIssueActivityPublic is a function, and I don't know why.
  
  Basically, I need to know how to use this procedure to put up my report. Once I can enter the transaction ID in a page element, I'll be set.

  How your procedure? You know that you can have the same procedure in the package with several definitions. Oracle allows you to use polymorphism, the ability to have multiple definitions of the same object with different signatures.

  Correction... You can not have a procedure of p in the case, are a function, since the calculation is expected to a way to fill the hidden element... You need a function to return the type of variable you want in the hidden element...

  Thank you

  Tony Miller
  Webster, TX

  Published by: Tony Miller on March 16, 2010 12:34

• How will I know where all the reports of users has access

  Hi gurus,
  
  We use the Hyperion Financial Reporting 9.3.1 & we have 80 reports & 750 users. How will I know where all the reports of users has access. Where can I find this information. I checked the SSP, it only shows the provisioing details, but not the name of the report. I also checked the Essbase.sec but no use. Where can I get the info. Kindly help me.
  
  
  Kind regards
  Kris...

  There is no tool of Hyperion to display easily groups and security filters.

  But it really depends on how you set up your security model.

  Normally, you add users into groups and assign these groups to essbase and reports (via the BEEP groups) cubes, so you can check reports have access to correct group and the users are in a good group.

  There is a security tool to export available here, hosted by Applied Olap, and underground work Olap-based:
  http://www.appliedolap.com/free-tools/Advanced-Security-Manager

  Best regards, Iain

• Create duplicate report

  Hello

  One of my systems uses the default batch process template and creates a new report for each object to be measured. I do not use the fly declaration and for the sake of argument that I use the standard XML generation with the horizontal.xsl stylesheet.

  Whenever I have test a TS batch creates one. XML report for each USE tested when execution is completed.

  I would then read the report using a LabVIEW VI step, edit and save this copy down to a secondary site. What is someone is able to recommend a reminder that I can use for this? I am struggling to find a reminder that runs after the initial report was recorded which still has access to the filepath for this socket.

  Also welcome alternative suggestions...

  Thank you

  Steve

  I've never used batch processing model, but I would take a look at the PostBatch callback, there is also a reminder of the BatchReport process template calls it then resets a variable called report. I guess it would be easy to use this variable to print your report in another place... (Locals.Report)., but I guess your best call might be to take a deep look at the process model of batch (use breakpoints) then personalize it.