Create a shadow, which fades down and becomes thinner on the sides

Similar Questions

• my computer broke down and when return to the setting factory. is the same where I can get my old picture when rear, files, etc etc?

  my computer broke down and when return to the setting factory. is the same where I can get my old picture when rear, files, etc etc?

  Hello

  Recuva worked for posters that have been in your same situation here

  a clean install wipes the hard drive clean of everything

  You cannot undo what you've done

  If you have lost data, you can try this

  http://www.Piriform.com/Recuva

  Read also:

  Since we don't know exactly how you reinstalled it seek a windows.old folder

  How to restore your personal files after you perform a custom Windows Vista or Windows 7 installation

  http://support.Microsoft.com/kb/932912

  or even return to a previous operating system by using the information in file window.old at the link below

  http://support.Microsoft.com/kb/933168

  If the above does not work:

  Try the data recovery experts

  but they are very expensive

• I've lost the main screen for photoshop! I don't know what I did, but now when I open photoshop, I get only the tool bar at the top and a little on the sides. How can I go back to the normal screen?

  I've lost the main screen for photoshop! I don't know what I did, but now when I open photoshop, I get only the tool bar at the top and a little on the sides. How can I go back to the normal screen?

  Hi renaeb,

  Would you go to the Windows menu in Photoshop and check the option framework application from the drop-down list.

  Concerning

  Sarika

• Why is my screen blurry and lines undulate on the sides? It also keeps the glitter!

  Why is my screen blurry and lines undulate on the sides? It also keeps the glitter!

  Is your very large monitor, like an old TV or flat, as perhaps a few inches thick?  If it is very deep (front to back), you have an old style monitor, and they need to be demagnetised every now and then. Look on the monitor for the menu button and navigate until you find an icon like a horseshoe with a bar slash through it (or like a magnet) and select it.  All wavy and colorful display for one minute and then went back to normal. Also, make sure that all the cables between the monitor and your computer are firmly connected at both ends, even if you have a thin screen.

  If you have a laptop, try to turn the screen and see if the blur changes.  If so, you might have a connector loose inside and may need to be considered at a repair shop. =(

  Best luck!

  (There is a small chance it is a result of burn; made me know if any of them help you, or that they do not apply.)

• screen flashed a bunch and it's on the side now

  I was on my computer and the screen flashed a bunch and it's on the side now, I have no idea how it happened. my whole screen rotated 90 degrees and itd dtuck like this.

  Original title:

  Okay, I think I'm the only one in the world, what has never happened

  Carper,

  CTRL + PERIOD (.) Rotate the image to the right

  CTRL + COMMA (,) rotate the image counterclockwise

  The ability to rotate the screen image is a feature of your video card, to help work with instructors who rotate the portrait orientation. Almost certainly you accidentally pressed Ctrl-Alt and an arrow.

  Rotate using these keys.

  UTC/GMT is 08:48 Saturday, August 25, 2012

• Can I "Pré"-pin and buttons 'Next' on the side of the browser?

  Hello all, I was hoping that someone could help me, I am trying to pin the previous and next buttons on the sides of the browser, according to the screenshot of Muse, but when I saw what they float, is there a way to get around this?

  Thank you in advance...

  ZAV

  Muse

  

  Preview in browser

  

  For the moment, there is no way around this

• iCloud photo library stuck in an interminable loading which slows down and stops my entire network.

  Last month I've upgraded successfully to El Capitan. Since then, after choosing to automatically download and store my entire library to the cloud, the download process caused a lot of problems. First of all, I had to leave the laptop on day and night and connected to the internet to complete the download. He has almost completely downloaded (with several modem restarts because the massive data download accidents caused connectivity) but then I had a planned trip and had to shut down the process. I tried to start again when I arrived at my destination, but it seemed to have started the process everything again (see below where the progress bar is at the very beginning again when previously, it was almost completely to the end) and close network of my poor host several times AND he ate all my CPU activity slow down and even stop any other activity of the laptop. Finally, I had to leave the process altogether for the rest of my visit. In fact, I had to disable wifi on my laptop because the process continued in the background even when I got the Photos app off the power. When I returned home, I studied the problem and learned how to fix the library by pressing the command and Option keys when I turned on the photo program. Once, the process started all over again and this time, he showed an any number of items to download (there was less than 25 000 points before this download now it shows more than 26,000).

  

  Finally, I got it at the Apple Genius Bar, in the hope of a quick solution. He, even, fixed the library as well as a few other permissions by using Apple's Diagnostics. Everything seems to be working again, but the process had to start all over again for some reason any and he told me to connect the laptop to the modem via a cable and left running overnight until the process completed. I did it. The first night, I was happy. It seemed that 25% of the process had already been completed. At this rate, it wouldn't take another 4 days. He told me that when he gets in, he would never to do it again. HOWEVER, after the second night of leaving it night directly connected to the modem, I checked it this morning and it seems to have started all OVER AGAIN FROM THE BEGINNING! Still, he hangs up my entire network. I can't watch the Apple TV, or use my iPad for work or my iPhone to access and other plans. Currently, there seems to be a nightmare without end of download and spoil my network (and notice that there are now more 28 000 points).

  

  This is intolerable. I can't live in this endless loop of photos download crashing my network and slow down my programs. I understand that this is not a problem isolated to me. So, did anyone found one simple solution other than its use onedrive or flickr or another synchronization photo program?

  28 000 pictures takes a lot of time - it took me ten days to 7000 and whenever you try to 'fix' it do you it longer - I stopped mine during the day when I was home so it wouldn't screw up my internet access form other devices, defined the Mac not to go to sleep and turn anytime I don't have internet

  Basically, your choices are to turn it off and not use ICPL or use it and let him complete without constant interference and restart the process

  Once he finished he initial transfer it stays out of the way, even with large updates (I added more than 10,000 photos since my initial download)

  LN

• Dell Vostro 430 sometimes breaks down and does not find the hard drive in the bios

  So I have this old - ish Dell Vostro 430, intel cpu, windows 7 hard disk sata 250 GB, 4 GB of ram.

  Update BIOS to the latest version 2.4.0

  In certain exceptional circumstances, this PC sometimes crashes in windows, it is restarted, and then when he comes back it does not find the hard drive as a gift. He is not seen in the bios and does not start.

  To fix, I have to unplug the power cable, wait a few seconds, plug in, reboot the computer and it starts normally, load windows and everything.

  So far, I have tried to paginate on another hard disk, reinstall the Windows operating system from scratch, and same thing happens from time to time.

  It is difficult to find the cause of the problem, because this happens very rarely.

  Sometimes, when the pc is turned on for the first time in the morning, the hard drive is not found by the bios and we reappear at the same trick (disconnect the power cable) to take him back.

  When it crashes when using inside Windows, it seems that the reason is the computer can't find the hard drive.

  Such computer is out of warranty.

  It would be nice to just throw this computer because it is still fine for the work it has to do, + I have Windows and Office OEM license on it, as well as many other software that I have to reinstall etc.etc.

  No idea what I could troubleshoot?

  Maybe change the motherboard? How can I buy a new motherboard for an out of warranty Dell?

  While possibly keeping all the OEM licenses (Windows 7 and Office 2007).

  Desu

  .. .once in a while...

  That will make hard to resolve this situation.

  • Have you tried to replace the battery in the motherboard, if nothing else than to exclude it? CR2032, 3-volt lithium-ion, ~ $2 at discount stores. Do not forget to open the BIOS Setup and copy down all current settings first because remove battery BIOS resets the default values, which is maybe not correct for your specific system.
  • Have you tried another SATA data cable, or reinstall the existing at both ends?
  • Have you reinstall RAM and PCI card in their slots?
  • Have you used canned air to blow out the dust?
  • Maybe a power supply problem... ? If insufficient voltage, he could not start the HARD drive quite fast at startup, or quick enough after your option settings to be able to turn the HARD drive off when it is not accessed, what may cause this error message 'not found '.
  • If you use a power strip or surge protector, have you deleted and the PC connected directly to a wall jack?

  If it is a motherboard defective and you replace it with another jury of Vostro 430, you shouldn't have any problems with Windows or Office licenses. Assuming you are using Windows Dell reinstall for exact same version of Windows drive that was installed at the factory, it should not even ask the product key, if you must reinstall Windows on the HARD drive. But even if she asks, there should be a sticker somewhere on the PC with your unique product key so you can enter if the installer made the request.

  and make sure you have the Office product key too...

• Network slows down and stops receiving data the halfway during the loading of a site or downloading

  In windows 7, my network slows down and stops at the midway during the download or load of a site with the largest size. When I restart the download, the same problem occurs again. When I use a download manager I have to stop the download and then picks up the part were stopping to download and vice versa in order to finish the rest of the download to complete. This problem is only with windows 7 and windows 7 sp 1.

  Hello

  ·         Did you follow all the methods provided?

  ·         You are using cable or wireless network connection?

  Let us know if you have followed all the steps of troubleshooting mentioned in the previous post, and what were the results, so that we can help you further.

  If you use try of connection through check wireless network and wired network. If a cable that you can try to use a new cable to see if the one you use has problems. If it is I'd see if anyone is leeches wireless turn off your connection. Note If you have more than 1 person on a 300kps connection there is no chance, you're going to both to have that kind of speed with a shared connection, especially if you use a hub, although I do not agree that a decline until 20kps is rare, it would not if someone is hogging the bandwidth of your connection.

  Method 1:

  You can also try to update the latest NIC drivers on the manufacturer's Web site and check if it helps.

  Reference:

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  http://Windows.Microsoft.com/en-us/Windows7/update-drivers-recommended-links

  Method 2:

  Try to release and renew the IP address, and check if this may help. To release and renew your IP address follow these steps:

  a. open windows command prompt

  b. Click Start - Run-type cmd and press enter

  c. to release your ip address ipconfig/release , press Enter

  d. to renew your ipconfig/renew IP address

• Virtual Server Center down and as its also the license server, it cannot start

  I have the virtual center server which is also the license as a virtual machine server. We had problems with the SAN today and decided to move this server to local storage in the case of other issues during the weekend, until we can diagnose/solve the problems of SAN. However, it will not start back up to stop the virtual machine to move (no installation storage vmotion again) and complains that cannot see the license server, the license server's so how can we start it?

  I tested stop this server before and to work around the problem, then we have just activated evaluation mode, the server restarted, and he returned to the license server mode when it was high, but he used to do that now and I can not start any vm at all and since most of them failed because of problems with SAN storage I need to get this resolved as soon as possible. The difference between when we tested before and now 4 months and update 3 has been applied recently.

  How do I start the server in its current or is configuration - it is no longer possible to use the evaluation mode and we do the licensing of other words, IE non-virtual?

  ......

  I managed to start the server using VM Player running in another physical server, but this is not an ideal long-term solution, but out me an affair until we solve this problem.

  Many people run in this mode.

  As a backup, just getting up an another license server using your existing key.  Point the ESX host with virtual machine on it to the 'temp' license server by connecting to the host ESX directly with the VI Client.

  Back up the virtual machine.

  Change license server address that you modified on the back of ESX host.

  Jase McCarty

  http://www.jasemccarty.com

  Co-author of VMware ESX Essentials in the virtual data center

  (ISBN:1420070274) Auerbach

  _{Please consider awarding points if this post was helpful or appropriate}

• Microsoft 4000 ergonomic, which are back and buttons just below the space bar for forward?

  Original title: tne on Microsoft 4000 ergonomic

  On the Microsoft 4000 ergonomic keyboard. What are the buttons back and next just below the bar of distinguished? I've never seen them do anything when I press them. And there is no link of programming the software set up for them.

  I just had the Microsoft 4000 ergonomic keyboard of THIS support in my office, and the back and the front keys work exactly as 'return' and arrows 'before' in my browser (Firefox).  I didn't do anything - program may be the game of the previous user upwards - but for me they work for the web back and forth, not navigation problem.

• I have two catalogs - Lightroom called an and a single called Lighroom 5, both in the same folder (Mac). I used 5, but now use LR CC. Just the catalof error. Now, he wants to make me choose one to use. Which one? And then I delete the other?

  I used LR 5 for a year or so, but recently spent to LR CC has been since then problems. Earlier got the dreaded corrupt CC catalog error and had to leave the app. When I restarted I got a dialog box showing two catalogs in the same folder. One is called simply Lightroom and Lightroom 5. The dialog box wants me to choose an action. I suppose that the LR 5 is older, but do not want to make things worse. And, once I choose the right, how safely get rid of the bad? Thank you.

  Navigate to the folder that contains your catalogs and look at the dates. The one with the most recent date would be the one you use. However, if it is damaged, it will be difficult to recover. It would be better to replace it with your latest backup. You can double-click the file itself catalog, Lightroom will start and try to open this catalog. But if it is corrupt, there are not many things you can do.

• Writing EXIF data (and how to define the side of the photo)

  Anyone had luck writing EXIF data in photos? Reading EXIF data are fairly easy, as demonstrated by "photobomber. Writing EXIF data seems to be more painful, however.

  In particular, I'm trying the face value of the photo.  I found mention on the web page of its existence in EXIF, with the code:

  0 x 4746

  That said, when I check the exif - tag.h, apparently not be listed.

  It is clear to me that this is a deal breaker or not.  The tags are listed in the exif - tag.h the only ones that can be used? Or are they simply definitions of convenience tag codes most commonly used?

  Thank you

  Daniel

  Incase others are reading this in the future and ask yourself how: my conclusion is that the best way to define metadata such as:

  -Photo rating

  -Tags

  -Description

  ... does NOT use EXIF.  On the contrary, it seems that XMP is a much better choice:

  http://en.Wikipedia.org/wiki/Extensible_Metadata_Platform

  Ideally, BB10 comes with the XMP library, and it can be easily added to your project. (right-click on the project node in "Project Explorer", go to the context menu item 'Configure', then 'add the library')

  Here's the code I added bo my main.cpp:

  //-----------------------------------------------------------------------------
  // XMP
  //-----------------------------------------------------------------------------
  
  // Must be defined to instantiate template classes
  #define TXMP_STRING_TYPE std::string
  
  // Must be defined to give access to XMPFiles
  #define XMP_INCLUDE_XMPFILES 1
  
  #define UNIX_ENV 1
  
  #include "xmp/XMP.incl_cpp"
  #include "xmp/XMP.hpp"
  
  #include 
  #include 
  
  using namespace std;
  
  //-----------------------------------------------------------------------------
  

  ... and here's what I added to the .h file that I wanted to use XMP in: (it does not include the XMP.incl_cpp at the top of the notice)

  //-----------------------------------------------------------------------------
  // XMP
  //-----------------------------------------------------------------------------
  
  #define TXMP_STRING_TYPE std::string
  #define XMP_INCLUDE_XMPFILES 1
  #define UNIX_ENV 1
  
  #include "xmp/XMP.hpp"
  
  #include 
  #include 
  
  using namespace std;
  
  //-----------------------------------------------------------------------------
  

  And finally, here's a big copy and paste part of the key code that I adapted to the code example in the XMP SDK I downloaded separately for read/write some common tags.  Feel free to use this code in your own applications, or to adapt it, if that's helpful.

  int ImageViewContainer::xmpWrite()
  {
      qDebug() << "xmpWrite()";
  
      string filename = file.toStdString();
  
      if (!SXMPMeta::Initialize())
      {
          qDebug() << "XMP: An error occurred initializing XMP.";
          return -1;
      }
  
      XMP_OptionBits options = 0;
  
      #if UNIX_ENV
          options |= kXMPFiles_ServerMode;
      #endif
  
      if (!SXMPFiles::Initialize(options))
      {
          qDebug() << "XMP: An error occurred initializing SXMPFiles.";
          return -1;
      }
  
      try
      {
          // Try using the smart handler.
          XMP_OptionBits opts = kXMPFiles_OpenForUpdate | kXMPFiles_OpenUseSmartHandler;
  
          bool ok;
          SXMPFiles myFile;
  
          // Open the file.
          ok = myFile.OpenFile(filename, kXMP_UnknownFile, opts);
          if (!ok)
          {
              qDebug() << "XMP: No smart handler available for " + file + ". Trying packet scanning.";
  
              // Now try using packet scanning.
              opts = kXMPFiles_OpenForUpdate | kXMPFiles_OpenUsePacketScanning;
              ok = myFile.OpenFile(filename, kXMP_UnknownFile, opts);
          }
  
          // If the file is open then read the metadata.
          if (ok)
          {
              qDebug() << "XMP: Opened: " << file;
  
              // Create the xmp object and get the xmp data.
              SXMPMeta meta;
              myFile.GetXMP(&meta);
  
              // Should we be doing this?
              meta.SetProperty(kXMP_NS_XMP, "CreatorTool", "Updated by PhotoStar", 0);
  
              int ratingToSet = rating;
              if (ratingToSet == -1) { ratingToSet = 0; }
              meta.SetProperty(kXMP_NS_XMP, "Rating", QString::number(ratingToSet).toStdString(), 0);
  
              // Required before we can call other functions that refer to this namespace
              // without getting an exception.
              std::string tmp;
              meta.RegisterNamespace("http://ns.microsoft.com/photo/1.0/", "MicrosoftPhoto", &tmp);
  
              if (ratingToSet == -1)
              {
                  meta.DeleteProperty("http://ns.microsoft.com/photo/1.0/", "Rating");
              }
              else
              {
                  int microsoftRating;
  
                  // Mapping:
                  // xmp:Rating=1 -> MicrosoftPhoto:Rating=1
                  // xmp:Rating=2 -> MicrosoftPhoto:Rating=25
                  // xmp:Rating=3 -> MicrosoftPhoto:Rating=50
                  // xmp:Rating=4 -> MicrosoftPhoto:Rating=75
                  // xmp:Rating=5 -> MicrosoftPhoto:Rating=100
  
                  if (ratingToSet == 1)
                  {
                      microsoftRating = 1;
                  }
                  else
                  {
                      microsoftRating = (ratingToSet - 1) * 25;
                  }
  
                  qDebug() << "MicrosoftPhoto:Rating: " << QString::number(microsoftRating);
                  meta.SetProperty("http://ns.microsoft.com/photo/1.0/", "Rating", QString::number(microsoftRating).toStdString(), 0);
              }
  
              // Delete old tags. (?)
              meta.DeleteProperty(kXMP_NS_DC, "subject");
  
              // Tags
              for (int i = 0; i < tags.size(); ++i)
              {
                  string value = tags[i].toStdString();
                  meta.AppendArrayItem(kXMP_NS_DC, "subject", kXMP_PropArrayIsOrdered, value, 0);
                  //meta.SetArrayItem(kXMP_NS_DC, "subject", i + 1, value, 0);
              }
  
              meta.SetLocalizedText(kXMP_NS_XMP, "Description", "en", "en-US", description.toStdString(), NULL);
  
              // Update the Metadata Date
              XMP_DateTime updatedTime;
  
              // Get the current time. This is a UTC time automatically adjusted for the local time.
              SXMPUtils::CurrentDateTime(&updatedTime);
              //if (meta.DoesPropertyExist(kXMP_NS_XMP, "MetadataDate"))
              //{
                  meta.SetProperty_Date(kXMP_NS_XMP, "MetadataDate", updatedTime, 0);
              //}
  
              // Now update alt-text properties
              //meta.SetLocalizedText(kXMP_NS_DC, "title", "en", "en-US", "Kind of pretty");
  
              // For debugging
              if (false)
              {
                  // Serialize the packet and write the buffer to a file.
                  // Let the padding be computed and use the default linefeed and indents without limits.
                  string metaBuffer;
                  meta.SerializeToBuffer(&metaBuffer, 0, 0, "", "", 0);
  
                  //qDebug() << QString::fromStdString(metaBuffer);
  
                  // Write the packet to a file as RDF
                  writeRDFToFile(&metaBuffer, filename + "_XMP_RDF.txt");
              }
  
              // Check we can put the XMP packet back into the file.
              if (myFile.CanPutXMP(meta))
              {
                  // If so then update the file with the modified XMP.
                  myFile.PutXMP(meta);
              }
              else
              {
                  // Silent for now. TODO: Should this be indicated in
                  // the UI somehow?
                  qDebug() << "XMP: Can't write to file.";
              }
  
              // Close the SXMPFile. This *must* be called. The XMP is not actually written and the
              // disk file is not closed until this call is made.
              myFile.CloseFile();
          }
          else
          {
              qDebug() << "XMP: Unable to open " << file;
          }
      }
      catch(XMP_Error & e)
      {
          qDebug() << "XMP ERROR: " << QString::fromStdString(e.GetErrMsg());
      }
  
      // Terminate the toolkit
      SXMPFiles::Terminate();
      SXMPMeta::Terminate();
  
      return 0;
  }
  
  int ImageViewContainer::xmpRead()
  {
      qDebug() << "xmpRead()";
  
      string filename = file.toStdString();
  
      if (!SXMPMeta::Initialize())
      {
          qDebug() << "XMP: An error occurred initializing XMP.";
          return -1;
      }
  
      XMP_OptionBits options = 0;
  
      #if UNIX_ENV
          options |= kXMPFiles_ServerMode;
      #endif
  
      if (!SXMPFiles::Initialize(options))
      {
          qDebug() << "XMP: An error occurred initializing SXMPFiles.";
          return -1;
      }
  
      try
      {
          // Try using the smart handler.
          XMP_OptionBits opts = kXMPFiles_OpenForRead | kXMPFiles_OpenUseSmartHandler;
  
          bool ok;
          SXMPFiles myFile;
  
          // Open the file.
          ok = myFile.OpenFile(filename, kXMP_UnknownFile, opts);
          if (!ok)
          {
              qDebug() << "XMP: No smart handler available for " + file + ". Trying packet scanning.";
  
              // Now try using packet scanning.
              opts = kXMPFiles_OpenForUpdate | kXMPFiles_OpenUsePacketScanning;
              ok = myFile.OpenFile(filename, kXMP_UnknownFile, opts);
          }
  
          // If the file is open then read the metadata.
          if (ok)
          {
              qDebug() << "XMP: Opened: " << file;
  
              // Create the xmp object and get the xmp data.
              SXMPMeta meta;
              myFile.GetXMP(&meta);
  
              bool exists;
  
              // Stores the value for the property.
              string value;
  
              // XMP Rating
              exists = meta.GetProperty(kXMP_NS_XMP, "Rating", &value, NULL);
              if (exists)
              {
                  rating = QString::fromStdString(value).toInt(&ok);
                  if (!ok)
                  {
                      rating = -1;
                  }
              }
              else
              {
                  rating = -1;
              }
  
              // Microsoft Rating (only look for this if xmp:Rating is missing)
              if (rating == -1)
              {
                  // Required before we can call other functions that refer to this namespace
                  // without getting an exception.
                  std::string tmp;
                  meta.RegisterNamespace("http://ns.microsoft.com/photo/1.0/", "MicrosoftPhoto", &tmp);
  
                  exists = meta.GetProperty("http://ns.microsoft.com/photo/1.0/", "MicrosoftPhoto:Rating", &value, NULL);
                  //exists = meta.GetProperty(kXMP_NS_XMP, "Rating", &value, NULL);
                  if (exists)
                  {
                      rating = QString::fromStdString(value).toInt(&ok);
                      if (!ok)
                      {
                          rating = -1;
                      }
                      else
                      {
                          // The Microsoft rating is 0, 25, 50, 75, 100.
                          rating /= 25;
                      }
                  }
                  else
                  {
                      rating = -1;
                  }
              }
  
              value.clear();
  
              qDebug() << "XMP Rating: " << rating;
  
              // Tags
              tags.clear();
              int arraySize = meta.CountArrayItems(kXMP_NS_DC, "subject");
              for (int i = 1; i <= arraySize; i++)
              {
                  meta.GetArrayItem(kXMP_NS_DC, "subject", i, &value, 0);
                  qDebug() << "XMP Tag[" << i << "]: " << QString::fromStdString(value);
                  tags.append(QString::fromStdString(value));
              }
  
              value.clear();
  
              // Description
              meta.GetLocalizedText(kXMP_NS_XMP, "Description", "en", "en-US", NULL, &value, NULL);
              description = QString::fromStdString(value);
              qDebug() << "XMP Description: " << description;
  
              timestamp = QDateTime();
              XMP_DateTime updatedTime;
              // Get the current time. This is a UTC time automatically adjusted for the local time.
              SXMPUtils::CurrentDateTime(&updatedTime);
              if (meta.DoesPropertyExist(kXMP_NS_XMP, "MetadataDate"))
              {
                  meta.GetProperty_Date(kXMP_NS_XMP, "MetadataDate", &updatedTime, 0);
                  if (updatedTime.hasDate)
                  {
                      if (updatedTime.hasTime)
                      {
                          timestamp = QDateTime(QDate(updatedTime.year, updatedTime.month, updatedTime.day), QTime(updatedTime.hour, updatedTime.minute, updatedTime.second));
                      }
                      else
                      {
                          timestamp = QDateTime(QDate(updatedTime.year, updatedTime.month, updatedTime.day), QTime(0, 0, 0));
                      }
                  }
              }
  
              // Close the SXMPFile. The resource file is already closed if it was
              // opened as read only but this call must still be made.
              myFile.CloseFile();
          }
          else
          {
              qDebug() << "XMP: Unable to open " << file;
          }
      }
      catch(XMP_Error & e)
      {
          qDebug() << "XMP ERROR: " << QString::fromStdString(e.GetErrMsg());
      }
  
      // Terminate the toolkit
      SXMPFiles::Terminate();
      SXMPMeta::Terminate();
  
      return 0;
  }
  

  Note that the code above makes use of some class member variables:

      int rating;
      QList tags;
      QString description;
      QDateTime timestamp;
  

  One final note: there is a code that deals with the MicrosoftPhoto:Rating XMP tag. It's because I'm on Windows and I noticed that if you click on a photo in Windows Explorer, it allows you to display/change some meta (such as star ratings) data directly in Explorer. When you do so, it sets the MicrosoftPhoto:Rating tag (as well as the tag xmp:Rating, I believe). Once, he put that, if your application updates the xmp:Rating tag but don't update the MicrosoftPhoto:Rating tag and the file returns on Windows, then he continues to use the old notation before your update app. (he seems to ignore xmp:Rating if MicrosoftPhoto:Rating is present)

• When you use safari on my iPhone 6 and I turn on the side he's not mode full screen - instead it only shows half of the left side showing bookmark options - reading lists etc - it is really affecting my productivity

  Dream ever since I got my iPhone 6 and when I use safari and turn the phone on the side, it does not show the screen complete safari - instead the half left shows the options of brand book / read the list of options, etc.  my friends iPhone 6 does not mean that when it is in safari - please help me - I looked in the settings, etc and I can't find anything - thank you

  Look for the bookmark icon, it should be noted in blue. Press it to turn it off.

• Stand-alone table in the drop-down and limit values in the report

  Hello
  
  I report where the measured values should be limited based on the threshold value table. Values threshold has the values below.
  
  Table of threshold:
  
  ID of threshold threshold values descr
  
  13345 10000 initial
  
  13346 departure 20000
  
  13347 30000 initial start
  
  13348 40000 end
  
  13349 end last 50000
  
  This table is independent of the star for OBIEE report schema and created for the user, given the threshold value.
  
  Shud threshold shown falling down the values and the drop-down list values invites is always GTE to 10 000 by default. The report shud display measurement values GTE 10,000 in the columns of 4 measure of the report written by deafult, based on the work of prompt and default shud according to the user's selection in the menu dropdown.
  
  I intend to apply it using the variable of the presentation, but when I select GTE in the command prompt, this option is not present. Please throw some light on this issue.
  
  Thanks in advance.

  Use is equal to the operator in the guest... change the show section for all values of sql result... after that, change the formula in the column to the case where 1 = 0 then else 1 end... now you can make a variable presentation... use this variable in your report with is liked this operator in your report... HTH...

  Published by: Vincent on July 20, 2010 10:57