create a table of jpg images

Similar Questions

• Creating a table of jpg files external, please help.

  So what I want to do is to load external jpg in an array of MovieClips and then access the main onEnterFrame function. My code is below:

  var imageLoader:Loader = new Loader();

  var imageArray:Array = new Array();

  function loadImage (): void {}
  for (i = 0; i < 9; i ++) {}
  imageLoader.load (new URLRequest ("image" + String (i) + '.jpg'));
  Demonstration [i] = new MovieClip();
  imageArray [i] .addChild (imageLoader);

  }

  addEventListener (Event.ENTER_FRAME, onEnterFrame);

  }

  I tried to add an Event.COMPLETE function, I found:

  imageLoader.contentLoaderInfo.addEventListener(Event.COMPLETE, imageLoaded);
  
  function imageLoaded(e:Event):void {
       var image:Bitmap = (Bitmap)(e.target.content);
       imageArray[i] = new MovieClip();
       imageArray[i].addChild(image);
  }
  
  Unfortunately, I usually only ended up with 1 or 0 images, and errors. I can't seem to properly pass the i
  value, so that's a big problem because the order the images go is key to my program.
  
  Please help me get this working so my image gallery can work, thanks!

  So the problem is that you want in the table in the order I'm right on that?

  See the updated code:

  var imageArray:Array = new Array();

  var imageLoader:Array = new Array();

  function loadImage (): void {}
  for (i = 0; i< 9;="" i++)="">
  [i] var imageLoader = new Loader();

  Demonstration [i] = new MovieClip();

  imageLoader.load (new URLRequest ("image" + String (i) + '.jpg'));
  imageArray [i] .addChild (imageLoader [i]);

  imageLoader.contentLoaderInfo.addEventListener (Event.COMPLETE, imageLoaded);

  }

  addEventListener (Event.ENTER_FRAME, onEnterFrame);

  }

  / * function imageLoaded(e:Event):void {}
  Bitmap of the image: var = (Bitmap) (e.target.content);
  imageArray [index] .addChild (image);
  }*/

  In this case, you are unable to follow if an image is loaded or not. It's easiest to do this. If your images do not come from dynamic sources and are set in the number and the position, you can use this method too.

• Create a table and inserting images easily?

  I have about 260 photos still size that should go in a table.

  The table will then 4 obviously 65 lines of broad and wide columns.

  Basically is there something that I can use to mass insert these images, one in each cell?

  Thank you!

  Hey afecustoms,

  You should look into some viewers of pictures such as http://www.airtightinteractive.com/viewers/. Saw the pictures, sitting at a table could get a little boring, so I thought id throw this site to you. I used one of them of hermetic to my http://mustangdriveinguelph.ca/flash%20tilt/index.aspxdrive-in theater site. You can also find most of these programs in torrents

  Check them out!

• How to create a camera profile that works with a JPG image with my color chart to check inside? [was: color Checker chart.] Really need help]

  I got a color chart to check. It came not with any software whatsoever. I shoot my images in JPG format. I know it's not really ideal but I'm on a tight budget and don't have the money for a digital SLR cameras that shoot raw. Is there anyway that I can always create a camera profile that works with a JPG image with my color chart to check inside? My table also includes RGB values below each color. Maybe I can match each color in the photo these values manually? If so how is this done?

  Thank you

  Bryce

  I've never seen software that does what you ask for JPGs, only RAWs.  The main problem is that any profile or adjustment is calculated according a JPG of a particular chart photo would apply to the other JPG photos with the same white balance.

  Jpg does not use "camera profiles" anyway in Lightroom, the profile is always integrated.

  There is a product that allows to calculate the HSL cursor offset values given a JPG photo their own table owner who looked like a color checker, but had two lines reversed so the software could not be used with a standard-checker color, unfortunately.  Now their table has twice as many patches (48), and looking at it on their site I'm not too sure that it does not always work with JPGs or if she's just raw files, now.

  The graphic and software are called SpyderCheckr of Datacolor.  There are various software that do different things, but none are using a ColorChecker, so having one is mainly a loss until you get a camera that can take raw photos, so keep a humidity and temperature controlled environment as much as possible until you have the right camera.  You can probably use the grey patches to adjust exposure, but that's all.

  Today you need not a digital SLR to have raw photos, well.  My phone Galaxy S6 with the last update of Marshmallow and the software of camera update will take photos in format raw DNG in Pro mode which I can create custom profiles camera to use a ColorChecker, although the camera is really good in itself, so when I found everything first he could make DNG I took a little but now, I usually just use the camera to make the jpg unless the shot is really important and the lighting is not too hard.  I think that S7 phone's camera is even better.

  What kind of camera do you have?  Sometimes, there are firmware hacks that allow the camera to shoot raw format even if the standard camera cannot.

• Addition of the new Image and text to an existing Page created with Tables

  Work in DW 5.5

  I try to add a new image/link and a small amount of text to an existing web page that was created with tables and centered.  I use AP div tags. One for the image and one for the text.  Everything works fine, but I can't get the new anchor points and to re - center with the rest of the page.  I'm not able to get around the "absolute positioning".  I tried different solutions of various tutorials but I can't make them work with tables.

  Added items are a Facebook button and text.

  Go to: http://www.sugarhollowfarms.NET/index.html See the problem.

  Help, please. I'm not that experienced.

  First, make a back up of the page before you implement the changes below!

  Take the bit of code below to

  ...... to..........

  and insert it directly after the opening tag div FWTableContainer and before your opening table tag (see location below):

  ">

  Join us
  

  on Facebook

  Then add - position: relative; -to the css of FWTableContainer (as shown below):

  {#FWTableContainer209091602}

  / * The div master to make sure that our contextual menus get properly aligned.  Be careful when you play with this one. */

  position: relative;

  margin: auto;

  Width: 800px;

  height: 600px;

  text-align: left;

  top: 20px;

  background-image: url(images/homepage_new3.jpg);

  border: medium solid #336600;

  position: relative;

  }

  Edit the css for FBlogo to as below:

  {#FBlogo}

  position: absolute;

  left: 700px;

  top: 380px;

  Width: 91px;

  z-index: 1;

  text-align: center;

  }

  Edit the css for bodytext as below:

  {.bodytext}

  do-family: Verdana, Arial, Helvetica, without serif.

  do-size: 11px;

  line-height: 13px;

  margin: 0;

  padding: 0;

  }

• create the table colors a jpeg image

  Hi guys,.

  I would like to create a table of the colors of the bmp file.

  Can someone help me please?

  Altenbach says:

  In particular, your image contains exactly 256 pixels horizontally while the lines are redundant, so everything you need is read on the 256 colors from left to right and store them in a table that contains 256 RGB color. Should be trivial to do! Unflatten image and index on a line.

  Here's what I had in mind. Works very well.

  (Note that the indicator is an array of boxes, without the classic palette color.

  

  (Of course if you do not know the image format, you should detect the type and act accordingly. This is just a draft)

• After the last update (a few days ago) LR cc no longer displays jpg images, he created in the export process.

  LR cc no longer displays jpg images, he created in his export process in its grid and loupe views. However if you use the option 'Add photos' pictures appear ok.

  Hello

  I noticed that after the import, the photos were inscription on-5 pour the parameter "exhibition". The correction of this setting doesn't change, but the application of the automatic correction or filter preset allows crowing the image correctly... To do this procedure on each image one by one.

  I noticed that, after importation, the photos were set at-5 for the parameter "exhibition". The correction of this parameter does not change, but the application of the automatic correction or a filter preset to display the image correctly... We must do this on each image one by one.

  Emmanuel Cattier

• How can I make the JPG images inserted into a visible table cell?

  Dreamweaver CS4 - Macintosh iMac OSX 10.9.5

  DW has been great to work for ten years. I have a very simple website with a few tables and multiple images.

  He did all of a sudden all the images I have insert invisible. The 'elements - Visual Aids Invisible' is checked.

  I need to make changes to the site, but I'm frustrated. I can't add or replace images.

  I don't want to upgrade to creative cloud.

  Help!

  Benniemc wrote:

  Dreamweaver CS4 - Macintosh iMac OSX 10.9.5

  DW works a lot for ten years. I have a very simple website with a few tables and multiple images.

  He suddenly made all the images I have insert invisible. The 'elements - Visual Aids Invisible' is checked.

  It's all good and dandy that Nancy and Jon say that they see your site online will be images. Correct me if I'm wrong but... the real problem is that just inserted images are not visible in Dreamweaver making any visibility on the site online a moot point, right?

  best,

  Shocker

• How to make a simple slideshow DVD of a group of .jpg images?  No music, no fancy transition. iDVD &gt; magic DVD comes close, but the quality is poor and I want the images in a specific order.  I also have iLIFE ' 09, which includes iPHOTO

  How to make a simple slideshow DVD of a group of .jpg images?  No music, no fancy transition. iDVD > magic DVD comes close, but the quality is poor and I want the images in a specific order.  I also have iLIFE ' 09, which includes iPHOTO

  1. put the image files you want in the slide show in an album and genre as you want. Follow the Apple document to prepare images for iDVD: iDVD ' 09 (7.x): preparing images for iDVD slideshows

  2 - Launch iDVD and select an older theme, not animated.  You can change the background of the theme by dragging the image file of your choice, black or other, in the display pane for the menu.

  3 - Click on the button '+' and add a slideshow from the menu.

  

  4. double click on the sideshow button to enter the mode of construction of the slide show.

  5. in the media pane click the Photos button.

  6 - click on iPhoto and find the album you created with selected images.

  

  7. Select all images in the album and drag to the left in the slide show window.

  8 - Select the transition for the slideshow and the time for each slide on screen

  9 - follow this workflow to help ensure the best DVD video qualty:

  Once the project you want it save it as an image disk via the menu file → save as Disk Image . It will separate from the process of encoding of the burning process.

  To check coding mount the disk image, launch a DVD player and read it.  If it plays OK with DVD, encoding is good.

  Burn burn to disc with utility disk or toasts to the slowest speed (2 x - 4 x) in order to ensure the best quality.  Always use higher quality media: Verbatim, Maxell or Taiyo Yuden DVD-R are recommended in these forums.

  

• Creating a table with a while loop

  I want to create a table using a while loop but I don't know how to do it.  Basically, I want to do the same thing as in the image of the example VI in LabVIEW VIs, called 'Graph XY Data Types.vi' example, but with a while loop instead of a for loop.  The reason why I want to do with a while loop is because LabVIEW will not faint error or VISA data thanks to a for loop.

  LabVIEW certainly enable you to pass out a mistake or VISA through a loop for. The default value is autoindex output and thus creating a table but is a simple right-click on the tunnel exit to change that. For recent versions, it changes the Tunnel mode to "last value". You can also use a shift register.

• I have two JPG images on each side of a piece that I want to combine on a JPG image

  I have two JPGs of each side of a piece I want to combine on a JPG image... is snyone knows how to do this?

  Install the free software "Irfanview".
  Then run it and click on:
  Create an image-> Image of the Panorama"
  This will allow you to place two or more .jpg files above or next to each other to create another unique .jpg file.

  IrfanView: http://www.irfanview.com/>

  HTH,
  JW

• How to use UTL_FILE to print a JPG image in a CLOB

  I'm using Oracle 11.g.  I have an Oracle Apex application that generates automated emails. In the Apex, the user inserts a JPG image in a rich text field. This image is stored in a CLOB field. When it's time to send emails, Apex calls a stored procedure that reads the JPG image and stores it in a local variable called l_image_clob. The procedure of sending the embedded image with the rest of the body by e-mail to a list of users. (Note: this an embedded image and it is not an attachment). It all works very well.

  Now, I try to save the JPG image content stored in the l_image_clob variable in a JPG file on the server. The server is located on a Windows 7 platform.  The following code generates a file named correctly and the size of the file is correct, but it is not readable by the system. I get the error "is not a valid bitmap file" when I try to open it with Microsoft Paint. The image in the clob data looks something like: / 9j/4AAQSkZJRgABAgEAZABkAAD/4RXaRXhpZgAATU0AKg (a bunch more data) SSSSUpJJJJSkkkklKSSSSU / / Z

  How do I use utl_file to save the JPG image bank in the l_image_clob variable to a valid JPG file?

  -- Here's the code which creates the file that is "not a valid bitmap file"
  -- Create a file based on the content of l_image_clob
  l_image_filename := 'image_' || p_event_pkey || '_' || i ||
  '.' || l_image_ext;
  l_file_handle := utl_file.fopen(l_dirname , l_image_filename, 'wb');
  -- wb is write byte. This returns file handle
  <<inner_loop>>
  for i in 1 .. ceil( length( l_image_clob ) / chnksz )
  loop
  utl_file.put_raw( l_file_handle,
  utl_raw.cast_to_raw( substr( l_image_clob, (i-1) * chnksz + 1, chnksz )));
  utl_file.fflush(l_file_handle);
  end loop inner_loop;
  utl_file.fclose(l_file_handle);

  procedure clobbase642file (p_clob clob, p_dir varchar2, varchar2 p_filename)

  is

  t_buffer varchar2 (32767).

  number of t_pos: = 1;

  number of t_size: = nls_charset_decl_len (32764, nls_charset_id ("char_cs"));

  number of t_len;

  t_fh utl_file.file_type;

  Start

  t_fh: = utl_file.fopen (p_dir, p_filename, "wb", 32767);

  t_len: = length (p_clob);

  loop

  When the t_pos output > t_len;

  t_buffer: = replace (replace (substr (p_clob, t_pos, t_size), Chr (10)), Chr (13));

  t_pos: = t_pos + t_size;

  all in t_pos <= t_len="" and="" mod(="" length(="" t_buffer="" ),="" 4="" )="">0

  loop

  t_buffer: = t_buffer | Replace (replace (substr (p_clob, t_pos, 1), Chr (10)), Chr (13));

  t_pos: = t_pos + 1;

  end loop;

  UTL_FILE.put_raw (t_fh, utl_encode.base64_decode (utl_raw.cast_to_raw (t_buffer)));

  end loop;

  UTL_FILE.fclose (t_fh);

  end;

• Is there anything I can do to improve the quality of the .jpg image?

  I'm working on a project for a client and the only files that were provided are low quality .jpg images. I already brought up the ppi to 300, but as with all .jpg images, there is only for many this can be done, I'm afraid.

  I just wanted to check with the community to see if there is some advice that I might have missed. I want to make sure you have covered all the bases.

  P.S. I am these cutting and exporting to PNG files. Then maybe there is a way to at least soften the edges of the cut?

  You cannot create information after it has been packed away, but you can remove the checkerboard patterns and artifacts of mosquito with a plugin like "Topaz" DeJepeg https://www.topazlabs.com/dejpeg I use it all the time and can't say I've seen any other plugin do a better job. Its about $30, but they give you a free month assessment. The images are inevitably more soft, but you can always sharpen them.

  Terri

• How can I create a link to an image that is located on an ftp site to a Web page that is located on another.

  How can I create a link to an image that is located on an ftp site to a Web page that is located on another.

  I managed to do it with the full path of the link (file:///C|/Users/myname/Documents/familyK3/image1.jpg), but as it is quite long, I would use the relative path. To be clear, I have 1 site that spans 3 different storage locations for FTP. site1 (named familyK), that contains the page. On this page, I have an image that is in the images on training3 (named familyK3). I tried... / familyK3/images and... /... (/ familyK3/images, but I don't get to see the photo in DW (since it usually refers to an image in the same folder (root)) and not to another location).

  I use dreamweaver8.

  Stephaan

  Use an absolute URL in the field of the CBC to your properties panel.

  http://your_other_site.com/images/filename.jpg"alt ="description">

  Nancy O.

• What are the different options for creating a slide show of images in database in Dreamweaver 5?

  Hi, I created slideshows in Bridge, and they all work very well. They are exactly what I had in mind, but it was the only solution that I could find that I understood. My knowledge of web design is minimal at most. I enclose the slideshows on my html site using iframes, but it won't load properly in Safari.

  I have included the code at the bottom of this post.

  The code dealing with the slideshow and IFrame in question are towards the bottom of the document, I have them marked in bold. All styles regarding the < div > locations and these are on a separate style sheet, I don't know if you need to troubleshoot.

  I was wondering if someone could clue me in what I can do with this code to make this slide show work properly in safari. I've checked chrome and load it properly. Not sure about other browsers, I do not have access currently.

  I also wonder if there is another way I can create a slideshow using CSS5. This slideshow is fine, but I was also looking to include text - image names and descriptions - without having to edit each image in Photoshop to include the text.

  Thank you for your time, any help would be appreciated.

  < ! DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional / / IN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd" > ""

  " < html xmlns =" http://www.w3.org/1999/xhtml ">

  < head >

  < meta content = "creator/artist" name = 'Ryan Olsen' / > < name meta = "keywords" content = "Ryan Olsen, artist, painting, drawing, dark fantasy, landscape, seascape, pair, Connecicut, NYC" / > < name meta = "description" content = "The collection of art by Ryan Olsen" / > "

  < meta http-equiv = "Content-Type" content = text/html"; Charset = UTF-8 "/ >"

  Studio < title > Ryan Olsen < / title >

  < script type = "text/javascript" >

  function MM_swapImgRestore() //v3.0 {}

  var i, x = offline. MM_sr; for (i = 0; a & & I <.) Length & & (x = a [i]) & & x.oSrc; i ++) x.src = x.oSrc;

  }

  function MM_preloadImages() {//v3.0

  var d = document; If (d.images) {if(!d.MM_p) d.MM_p = new Array();

  var i, j is d.MM_p.length, a = MM_preloadImages.arguments; for (i = 0; i <.) Length; i ++)

  If (a [i].indexOf("#")! = 0) {d.MM_p [j] = new Image; d.MM_p [j ++] .src = a [i] ;}}

  }

  function MM_findObj (n, d) {//v4.01

  var p, i, x;  if(!d) d = document; If ((p = n.IndexOf ("?")) > 0 & & parent.frames.length) {}

  d = parent.frames [n.Substring(p+1)] .document; n = n.Substring (0, p) ;}

  If (!) () x = d [n]) & & copyrights) x = d.all [n]; for (i = 0;! x & & i < d.forms.length; i ++) x = d.forms [i] [n];

  for (i = 0;! x & & d.layers & & I < d.layers.length; i ++) x = MM_findObj (n, d.layers [i] .document);

  If (! x & & d.getElementById) x = d.getElementById (n); Return x;

  }

  function MM_swapImage() {//v3.0

  var i, j = 0, x, a = MM_swapImage.arguments; document. MM_sr = new Array; for (i = 0; i <(a.length-2); I += 3).

  If ((x = MM_findObj (a [i]))! = null) {document. MM_sr [j ++] = x; if(!x.oSrc) x.oSrc = x.src; x.SRC = a [i + 2] ;}

  }

  < /script >

  < link href = "ryanolsenstudios.css" rel = "stylesheet" type = "text/css" / > "

  < script src = "SpryAssets/SpryMenuBar.js" type = "text/javascript" > < / script > "

  < link href = "SpryAssets/SpryMenuBarVertical.css" rel = "stylesheet" type = "text/css" / > "

  < / head >

  < body = onload "MM_preloadImages (" images/gallerytabroll.jpg','images/transformativeroll.jpg','ima ges/landscapesroll.jpg ','... /ryanolsenstudios/illustrationstab.jpg','images/illustrationrol l.jpg','images/bioroll.jpg','images/petportraitroll.jpg','images/sparklessroll.jpg'")" >

  < div id = "Sideupward" >

  < div id = "header" >

  < img src = "images/name.jpg' width ="1057"height ="87"alt ="name"/ >"

  < / div >

  < div id = "banner" >

  < img src = "images/features" width = "1158" height = "155" alt = "banner" / > < / < / div > "

  < / div >

  < div id = "navigationalmenu" >

  < div id = "gallerytab" >

  < ul id = "MenuBar2" class = "MenuBarVertical" >

  "< li > < a class ="MenuBarItemSubmenu"href =" # "MM_swapImgRestore" onmouseover = "MM_swapImage ('Gallery tab',", ' images/gallerytabroll.jpg', 1) "> < img src =" images/gallerytab.jpg"alt = name of the 'Gallery' = width of the tab 'Gallery' ="252"height ="72"border ="0"class ="MenuBarItemSubmenu"id ="Gallery tab"/ > < /a >"

  < ul >

  "< li > < a href ="transformative.html"MM_swapImgRestore" onmouseover ="MM_swapImage ('transformation',", ' images/transformativeroll.jpg', 1) "> < img src =" images/transformative.jpg "alt ="transformative"name ="transformative"width ="174"height ="53"border ="0"id ="transformative"/ > < /a >

  "< li > < a href ="landscapes.html"MM_swapImgRestore" onmouseover ="MM_swapImage ('landscapes'", ' images/landscapesroll.jpg', 1) "> < img src =" images/landscapes.jpg ' name = 'landscapes' width = '174' height = "53" border = "0" id = "landscape" / > < /a > < /li >

  "< li > < a href ="illustrations.html"MM_swapImgRestore" onmouseover ="MM_swapImage ('illustrations'", ' images/illustrationroll.jpg', 1) "> < img src =" images/illustrations.jpg "name ="illustrations"width ="174"height ="53"border ="0"id ="illustrations"/ > < / has >

  < /li >

  < li >

  "< a href ="petportraits.html"MM_swapImgRestore" onmouseover ="MM_swapImage ('portrait animal'", ' images/petportraitroll.jpg', 1) "> < img src =" images/petportrait.jpg "alt ="pet portraits"name ="pet portrait"width ="174"height ="53"border ="0"id ="pet portrait"/ > < /a > < /li >

  < li >

  "< a href ="sparkless.html"MM_swapImgRestore" onmouseover ="MM_swapImage ('voddy'", ' images/sparklessroll.jpg', 1) "> < img src =" images/sparkless.jpg "alt ="voddy"name ="voddy"width ="174"height ="53"border ="0"id ="voddy"/ > < /a >

  < /li >

  < /ul >

  < /li >

  < /ul >

  < / div >

  < div id = "showstab" >

  "< a href ="shows.html"MM_swapImgRestore" onmouseover ="MM_swapImage ('showstab',", ' images/showsroll.jpg', 0) "> < img src =" images/shows.jpg "alt = name 'shows' ="showstab"width ="252"height ="72"border ="0"id ="showstab2"/ > < /a >

  < / div >

  < div id = "home" >

  "< a href ="home.html"MM_swapImgRestore" onmouseover ="MM_swapImage ('Home' tab,", ' images/hometabroll.jpg', 0) "> < img src =" images/hometab.jpg "alt = name of home' = width of the"Home"tab ="252"height ="72"border ="0"id ="hometab2"/ > < /a >

  < / div >

  < div id = "biotab" >

  "< a href ="bio.html"MM_swapImgRestore" onmouseover ="MM_swapImage ('bio',", ' images/bioroll.jpg', 1) "> < img src =" images/bio.jpg ' alt = 'bio' name = 'bio' width = "252" height = border "72" = "0" id = "bio" / > < /a >

  < / div >

  < / div >

  < div id = "deformation" >

  " <! - Facebook Badge START – > < a href =" https://www.Facebook.com/WARSPIT "target ="_TOP"style =" font family: & quot; big lucida & quot; tahoma, verdana, arial, without serif; do-size: 11px; do-variant: normal; make-style: normal; make-weight: normal; color: # 3 b 5998; text-decoration: none; "" title = "Welcome to the WAR" > welcome to WAR < /a > < br / > < a href = " https://www.Facebook.com/WARSPIT " target = "_TOP" title = 'Welcome to the WAR' "> < img src =" https://badge.Facebook.com/badge/515768845136977.2357.1022321304.png "style =" border: 0px; " "" "/ > < /a > < br / > < a href =" https://www.Facebook.com/Advertising "target ="_TOP"style =" font family: & quot; " great Lucida & quot; Tahoma, verdana, arial, without serif. do-size: 11px; do-variant: normal; make-style: normal; make-weight: normal; color: # 3 b 5998; text-decoration: none; "title =" make your own badge! " ' > promote your Page too < /a > <! - Badge Facebook END - >

  < / div >

  < div id = "kaweynui" >

  " <! - Facebook Badge START – > < a href =" https://www.Facebook.com/ryanolsenstudios "title = 'Ryan Olsen Studios' style =" font family: & quot; big lucida & quot; tahoma, verdana, arial, without serif; do-size: 11px; do-variant: normal; make-style: normal; make-weight: normal; color: # 3 b 5998; text-decoration: none; "" target = "_TOP" > Ryan Olsen Studios < /a > < br / > < a href = " https://www.Facebook.com/ryanolsenstudios " title = 'Ryan Olsen Studios' target = "_TOP" > < img class = "img" src =" https://badge.Facebook.com/badge/572127626212351.1710.552992230.png "style ="border: 0px;" "alt =" "" / > < /a > < br / > < a href = " https://www.Facebook.com/Advertising "title = "Make your own badge!" style ="font family: & quot; large lucida & quot; tahoma, verdana, arial, without serif; do-size: 11px; do-variant: normal; make-style: normal; make-weight: normal; color: # 3 b 5998; text-decoration: none;" "target = '_TOP' > promote your Page too < /a > <! - END Badge Facebook - >

  < / div >

  < div id = "ryaninstagram" >

  " < a href =" http://Instagram.com/ryanolsenstudios "target ="_new"> < img src =" images/instagram - glyph.jpg ' width = '112' height = "144" alt = "instagram" / > < / a > "

  < / div >

  < div id = 'Gallery' >

  < iframe src = "" Transformative / index.html "width ="1003"height ="834"frameborder ="0"name = 'Gallery' >"

  < / iframe >

  < / div >

  < / div >

  < script type = "text/javascript" >

  var MenuBar2 = new Spry.Widget.MenuBar ("MenuBar2", {imgRight: SpryAssets/SpryMenuBarRightHover.gif"}" ");

  < /script >

  < / body >

  < / html >

  Take a look here Jquery slideshow tutorial for beginners | WEBTUTS