While trying to install a printer driver I got the message "the RPC server is unavailable."
I'm on Windows 2003 and XP Professional
Here's what Microsoft has to say about your question:
http://support.Microsoft.com/kb/884564
Here is someone who had the same problem you did.
Good luck! Please rate me upward if you find my post helpful. Thank you!
Tags: Windows
Similar Questions
-
My computer has been recognizing not my two printers (which I have had for years). The message says that the "spools of printer was not working" when I tried to print. So I uninstalled my two printers and tried to re - install.
Then I get a message that the "the RPC server is unavailable".Hello Sue Strong,.
Thank you for your message. Let's try the following:Click 'Start' > right click on 'My computer' > select 'manage '.Click the (+) sign next to "Services and Applications" > select 'Services '.On the right, find and right-click "RPC Remote Procedure Call ()" > select "Properties".Select the "Recovery" tab, then successively in first failure, second failure, etc. "restart the Service"Validate the change OKStay in the services menu.On the right, find and click on "Print Spooler" > select "Properties".Click on the 'Start' button and check the "Startup type" is set to "Automatic" and click OK.If these steps resolve the problem, click HERE for more information and troubleshooting techniques.Please let us know if it did or did not help to solve your problem.See you soonEngineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.
-
error code 1722: the RPC server is unavailable. (I can't print documents)
Hello
I can't print my documents, I have message from UN code error 1722 the RPC server is unavailableI started solving the problems on my printer, Windows did not find problem.I bought a software to repair Windows (Regenie), I was able to print during the morning, and the afternoon impossible.I restarted the Regenie software, I restarted my PC, and always impossible to print documents, with the same error error code 1722 the RPC server is unavailableI don't know what to do, thanks for your helpThanks for your repliesGood to youHello
See this page to select your language:
http://support.Microsoft.com/common/international.aspx
====================================
Or sorry that it is area English.
Left click at the bottom of the Microsoft Community page
English and set your language.
I hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="">-><- mark="" twain="" said="" it="">->
-
Unable to print error message...... "The RPC server is unavailable."
Run the HP Print & Scan Doctor program. (link)
-
Error 1053 while trying to install a printer.
* - Original title - error 1053
Tried to install the new printer on Windows 7 OEM OS. Put it on CD, you click on run and immediately got error stating: (abbr.). Print spooler Windows was arrested. Start the print spooler service. I click Start stressed after the highlight of print spooler in Services. Immediately receive error 1053: could not start the print spooler. Service has not responded to the request in a timely. Attempted to fix by downloading the Microsoft .NET Framework 1.1 Service Pack 1 hotfix. Tried 4 different patches that were made to work for Windows 7. Everyone says this system not covered with this patch. Without other options, any solution?
Hi man 3D.
I understand that you can not install a printer. I'll help you with this problem.
1. What is the brand and model of the computer?
2. What is the brand and model of the printer?
3. have you made changes on the computer recently?
4. what security software is installed on the computer?
Method 1.
Open the printer Troubleshooter: http://windows.microsoft.com/en-US/windows7/Open-the-Printer-troubleshooter
Method 2.
Install a printer: http://windows.microsoft.com/en-US/windows7/Install-a-printer
Method 3.
Solve printer problems: http://windows.microsoft.com/en-US/windows/printer-problems-in-windows-help#fix-printer-problems=windows-7&v1h=win8tab1&v2h=win7tab1&v3h=winvistatab1&v4h=winxptab1
Method 4.
You can run the Microsoft Safety Scanner to make sure that the computer is virus-free.Microsoft safety scanner: http://www.microsoft.com/security/scanner/en-us/default.aspx
Warning of Security Scanner: there could be a loss of data while performing an analysis using the Microsoft safety scanner to eliminate viruses as appropriate.
Method 5.
I suggest that you can exercise SFC scan and check if that helps. The SFC/SCANNOW command analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions.
For more information how to make SFC / scan, please follow this link: http://support.microsoft.com/kb/929833
Try these steps and let us know the status so that we can help you.
Thank you.
-
The cd I have for printer gives me error message 'Pilot' not compatible with the current system and I can't install the printer driver. Is there a cd that I can buy or download free I can get?
Yes - go to http://support.lexmark.com/index?page=content&productCode=LEXMARK_X1270&actp=PRODUCT&id=DR15494&segment=DOWNLOAD&userlocale=EN_US&locale=en and download the latest software.
Note: the link above is for the 32-bit software, so if you need the 64-bit version, it can be downloaded at http://support.lexmark.com/index?page=content&productCode=LEXMARK_X1270&actp=RECOMMEND&id=DR11218&segment=DOWNLOAD&userlocale=EN_US&oslocale=en_US&locale=en
-
While trying to install Windows XP, I get an error message that the files are missing.
problems with reinstallation
I have a laptop from my father in law. He still had his personal information on it so I tried to do a reinstall of xp from my cd. I did a format and begins to install. Then it appeared that there are missing files, and he did not finish the installation. Download a copy offline, or I have to purchse a new cd in a store? Thank you jennifer
It's not really answering your specific questions but most laptops come with a hidden restore partition that will put the laptop to a State "day one." Who can be the best option because it normally loads all the necessary drivers and applications too.
If you have published or look for the brand and model of the user manual it will detail the recovery options. A reinstall like this formats the HARD drive and start again.
Or did you specifically want X.P. and the lappy was initially delivered with Vista or W7
-
Try to configure the Server Active Directory rights management failed. Exception has been thrown by the target of invocation. to
System.DirectoryServices.Configuration.ProvUtils.EnsureGroupMembership (String
strTargetComputer, String strUserName, string strGroup, Boolean, String strDomain
fShouldBeMember)
at Microsoft.RightsManagementServices.Configuration.ProvisioningBase.EnsureUser)
at Microsoft.RightsManagementServices.Configuration.ProvisioningBase.Run)
at Microsoft.RightsManagementServices.Configuration.ProvisionerBase.DoProvision)
at Microsoft.RightsManagementServices.Configuration.ProvisionerBase.Run)
to Microsoft.RightsManagementServices.Configuration.ProvisionerHelper.Run (OperationType
operationType, data object)
to Microsoft.RightsManagementServices.Configuration.ProvisionEngine.Run (OperationType
operationType, Boolean passwordEncrypted)
at Microsoft.RightsManagementServices.Configuration.CmdLineHandler.Run)
Delete and re - install AD RMS to try the implementation again.Hi Samuel
Your question is beyond the scope of these Forums for answers. It is better suited for the IT Pro TechNet public. Please ask your question in the following forum.
Directory Services Forum - Technet:
http://social.technet.Microsoft.com/forums/en/winserverDS/threadsConcerning
-
I'm unable to download programs and receive a message that says that the program contained a virsus and was eliminated.
Hello
I suggest you to follow these steps and check if that helps:
Method 1:
Try to run the online scan and check if it helps:
http://www.Microsoft.com/security/PC-Security/Malware-removal.aspxMethod 2:
Try to perform the clean boot and check if it helps:
http://support.Microsoft.com/kb/929135NOTE: When you are finished troubleshooting, make sure that you reset the computer in start mode normal such as suggested in step 7 of the above article.
It will be useful.
-
I have can´t install any printer driver
I am having a problem when I try to install the Brother printer driver 8890 dw and displays the error message "WINDOWS COULD NOT INSTALL the PRINTER DRIVER in KERNEL MODE", this happens for any driver I try to install, I checked and the printer is compatible with windows 7 on my other computer works normally.
Hi Lucas,.
We will analyze and identify the cause of the problem.
Some of the kernel-mode drivers are not supported in Windows 7, because kernel-mode drivers could allow Remote Code execution.
In addition, when a kernel mode driver is corrupted, it blocks the entire system as opposed to the user-mode drivers. Please see the link below for more information
http://www.Microsoft.com/technet/security/bulletin/MS09-065.mspx
You can install the driver that works with Windows Vista, in Windows 7 by Windows compatibility mode.
Download driver article.
http://www.brother.com/E-FTP/windowsvista/us.html
a. connect the device to your computer and scan for the device in Device Manager.
b. right-click on the executable/program of the driver installation file, select Properties and select the compatibility tab.
c. click the checkbox in front of the option run this program in compatibility mode for and select Windows Vista from the drop-down list. then try to install the device driver.
For more information about executing a program in compatibility mode, see the following link.
http://Windows.Microsoft.com/en-us/Windows7/make-older-programs-run-in-this-version-of-Windows
See also the steps mentioned in the article.
Hope this information helps. Response with status so that we can help you.
-
I had a Trojan horse and had to do a reinstall of windows XP Pro is now trying to install my printer but I get the error message saying "entry point procedure GetMessage DLL is not found in the cscom dynamiclink library dll. Help, please!
Hello
I suggest you to refer to this link and check if it helps:
http://support.Microsoft.com/kb/308028
It will be useful.
-
I got a message saying that the RPC server is unavailable. My print spooler seems OK and my Dependencies tab it shows not itdepends on CPP, but I can't use my printer and I can't download the software because the driver is missing. I can't download the driver for some reason any. My printer is a lexmark X 1190.
Hi donnasmum,
1. When you receive the error message?
2. did you of recent changes on the computer?
3 when was the last time it was working fine?
4. do you have security software installed on the computer?
Method 1
According to the Lexmark solution, you will need to restart the service on the computer print spooler.
Error: "the RPC server is unavailable."
Method 2
If fails it to step above then check out the link below and run the fixit tool available.
Problems printing and printing errors
-
missing file
While trying to install a HP printer, I get a window saying that a HKEY_CLASSES_ROOT\CLSID\ {etc} is missing. Download this missing file from anywhere?
You must provide the rest of the message... but the short answer is to download the driver again installation package.
Before you try to reinstall, make sure you have uninstalled all by following the instructions here: Article 1.
-
I tried to install the update several times, but I get the same error every time ' encountered error 80070003 while trying to install the update of security for Windows 7 for x 64-based systems (KB2286198).
I tried to use products different a.v. to search for the virus, the male ware, kits root and found nothing.
Ran the update without any firewall or AV program running and still received the same error.
AMD Turion 64 X 2 Mobile, Windows 7 Ultimate 64, 4 GB ram, 42 GB of 110 GB of free space on the drive, 4 GB page file.
Hi a93svtf,
This problem occurs when some files in the update are missing, even if the update is downloaded and extracted successfully.
Step 1: Run the fixit available in the article below
You receive an error '0 x 80070002' or '0 x 80070003' code after you download an update from Windows Update, Microsoft Update or Windows Server Update Services
http://support.Microsoft.com/kb/910336
Step 2: Auditor of file system (CFS) scan to fix all of the corrupted system files. To do this, follow the steps mentioned in the link below:
How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
http://support.Microsoft.com/kb/929833
Now, try to install the update
Thank you, and in what concerns:
Ajay K
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think.
-
Windows cannot install your printer driver and / or utility
I have an Epson SX200 printer all-in-one and I am trying to install the device on a Vista 32 Dell laptop. I don't have the disk for the printer, so I try to download the drivers for the printer on the epson site.
I downloaded the drivers scanner and software sucsessfully, trying to download the point of finishing extracing printer driver files, I get an error message saying "Windows cannot install your printer driver and / or public services."
I tried the support of epson who tried intsalling the pilot from other web sources, bottom of dissabling starting programs, etc.
I searched the web but cannot find any patches or explanation to the problem...
Any ideas?
Hi J Bielawski,
Thank you for using the Microsoft Windows Vista Forums.
Method 1:
Let us try to disable the Antivirus security software and check the number.
Re-enable the security software after checking the issue.
You can also try disabling the firewall and check the issue.
Re-enable the firewall after checking the issue.
Enable or disable Windows Firewall
http://Windows.Microsoft.com/en-us/Windows-Vista/turn-Windows-Firewall-on-or-off
Check whether the problem is resolved.
Method 2:
A clean boot helps eliminate software conflicts. Let us check if software is causing the problem by following the clean boot procedure.
To perform the clean boot procedure, follow the instructions in the link below.
Step 1: Perform a clean boot
Step 2: Enable half the services
Step 3: Determine whether the problem returns
Step 4: Enable half of the startup items
Step 5: Determine whether the problem returnsStep 6: Resolve the problem
Step 7: Reset the computer to start as usual
How to troubleshoot a problem by performing a clean boot in Windows Vista
http://support.Microsoft.com/kb/929135
After checking the problem, turn the computer back to the Normal mode.
Uninstall or update the program that is causing the problem.
Check whether the problem is resolved.
Please post back and let us know if it helped to solve your problem.
Kind regards
KarthiK TP
Maybe you are looking for
-
writing in an array of FPGAs for application of the rt
When you use the control to write in an application of rt to write to a table fixed fpga is it requires to perfectly fit the sizes of battery? I am assuming that you can write an array which is less than or equal to the size of table fixed fpga with
-
Desktop HP pavilion a800n (win xp) has no option for the hibernation
I just had an old (xp) Pavilion a800n engineering and migrated my operating system and the programs in my laptop computer on a disc hard nine, which I installed it in the Pavilion. All is well (with some driver updates), but the only problem is that
-
I have a problem of comp. and have Dell with trayapp.msi. can anyone help
-
OfficeJet 4500: Frequent tricolor cartridge problem
I have an Officejet 4500 Wireless bought in autumn 2012. I suffer from reports very frequently by the printer there is a problem with the Tricolor cartridge. This almost always happens when the printer is on first, well that occasionally it happens e
-
EX90 DISCONNECTS IN A CALL AFTER 3-5 MINUTES
ALCON, Got a good for you... I have an EX90 (new) and is located on the network as well as multiple MXP in the same VLAN video. Was on TC5.0.1 and we have upgraded to TC7.2.1..., this is the first upgrade of EX90 here. Problem is then connected to th