Create a virtual computer model using the Windows Client (c#) function?

Similar Questions

• Apply a snapshot of a virtual computer by using the command prompt

  Hello

  Using the prompt in Windows 7 64 bit, how can I request a snapshot of a virtual machine created with Workstation 9.x?

  Thank you

  Good bye

  Try reading the Documentation of VMware Workstation, take a look at: Using vmrun to control Virtual Machines

• Synchronize my Pocket PC Dell AXIM 5 with my desktop Dell computer by using the Windows Vista operating system

  After the widows Vista operating system upgrade my Dell AXIM 5 PC Pocket can be not sync with my office.  Old software active sync is not compatible with Windows Vista.  At my pocket PC eventually become outdated.

  Hello ariccia473,

  Click the link for Mobile synchronization and see if your Pocket Pc works with the Mobile Sync 6.1.
  http://www.Microsoft.com/windowsmobile/en-us/downloads/Microsoft/Device-Center-download.mspx

  If this isn't the case, then you will need to check with Dell and see if they can be of support.

  Sincerely,

  Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• I want to just convert a virtual computer model... and I owe the clone to the model?

  can you just convert a VM directly to a model? I'm used to using the windows client, I carefully use the webclient service because VMware forces my hand. I hate it.

  I want just to convert a virtual machine in a model. I don't see this option. I see an option to CLONE to a template, but I don't want a clone. I don't want 2 copies. IT seems that it is perhaps the only option with the web client? Am I missing something? And then to turn back, I copy the model to model or something? At VMware really derailed this much?

  Client Windows worked fine. Customer Web is painful.

  Yes, you can convert a virtual machine to a model using the Web Client. See the attached screen photographed... where is the option for her.

  

• Get the name of the cluster which is on a virtual machine by using the virtual machine name

  Hello

  I wrote a code to get the various bits of information about our machines virtual for use in the capacity planning, we have 5 virtual centers, each has at least two clusters.

  My code already gets a handle to the virtual computer object (using the code snippet below) I can get the hostname.  Is there anyway to determine which cluster this host resides on, for example, is there a property of the virtual computer object that can be used to get this info?

  Public Sub connectVC()

  {

  string URI = " " https:// "+ Server +" / sdk "; "

  customer. Connect (Uri);

  customer. Login (username, password);

  }

  Public Sub get_vms()

  {

  NameValueCollection filter = new NameValueCollection();

  filter. Add ("name", "^ wks");

  IList & lt; EntityViewBase & gt; vmList = customer. FindEntityViews (typeof (VirtualMachine), null, filter, null);

  foreach (VirtualMachine vm in vmList)

  {

  "Do things

  }

  Thank you

  Mick

  Take a look at this Perl script that gets what you are looking for, you may need to translate this into another language if you are not using Perl bindings: whichClusterIsMyVMIn.pl - Find that your VM clustered belongs (requires a vCenter)

  =========================================================================

  William Lam

  VMware vExpert 2009

  Scripts for VMware ESX/ESXi and resources at: http://engineering.ucsb.edu/~duonglt/vmware/

  repository scripts vGhetto

  VMware Code Central - Scripts/code samples for developers and administrators

  http://Twitter.com/lamw

  If you find this information useful, please give points to "correct" or "useful".

• Create the installation of XP virtual computer which is the dual boot with Win7

  Hiya

  What is the best way to achieve this please - I can't find a definitive answer anywhere.

  I give myself a choice at startup if using Win7 or XP (default) - I'm afraid I don't remember who was loaded first.

  Any OS is chosen ends up as the C drive.

  I am running XP now and the boot.ini on the C drive only made reference to a BONE, so consider Win7 installation deals with startup ()? :

  timeout = 30

  default = multi (0) disk (0) rdisk (0) partition (2) \WINDOWS

  "multi (0) disk (0) rdisk (0) partition (2) \WINDOWS="Microsoft Windows XP Professional "/ noexecute = OPTIN/fastdetect

  I tried just to run XP Converter to create a virtual computer from the installation of XP - it creates the virtual machine, but fails on the Reconfiguration with "cannot find the volume of the system.

  What I have to change something something on the partition in the virtual machine?

  See you soon

  Craig

  Already go you as far as "Please activate now?"

  Congratulations - then fine.

  Expect this reactivation, except if you use volume licenses

  _________________________

  VMX-settings- WS FAQ -[MOAcd | http://sanbarrow.com/moa241.html]- VMDK-manual

• When I try to use the Windows Update link for my XP computer I get a message indicating that the location where the Windows Update stores data has changed and it needs to be repaired. How can I solve this problem?

  When I try to use the Windows Update link for my XP computer and after using Windows Mr. Fix - It, I get a message indicating that the location where the Windows Update stores data has changed and must be repaired. How can I solve this problem?

  I'm not that computer literate and do not understand what needs to be fixed.

  This problem just started a few weeks when I noticed that I had any recent download automatic update that I regularly get. So I tried to do it manually through access via my control panel.

  I use ESET Antivirus Node32 software.

  Hello

  1. What is the error message or an exact error code?

  2 have you made changes on the computer before this problem?

  3. you try to check the updates?

  I would suggest trying the following methods and check if it helps.

  Method 1:

  Reset Windows Update components and then try to download the updates.

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

  Warning: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: http://support.microsoft.com/kb/322756

   

  Method 2:

  File system scan tool checker and then try to press Ctrl + Alt + Delete and check.

  Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe):

  http://support.Microsoft.com/kb/310747

  Please respond with more information so that we could help you more.

• I would like to recover my computer by using the recovery disks that I created. There is NO OPTION!

  I have a ' aspir ' 5750-6414

  I got a bad virus, but I did create recovery disk (4 or them)

  I would like to recover my computer by using the recovery IMAGE.

  The bootable disc, but it does not give me the option to use MY recovery disks. It gives only factury default of restore options.

  I tried to restore my computer to the image I created when the computer was new that had a lot of my program, including ms word for hour.

  Can anyone help?

  Thank you. That's why presence. The person who set up my computer a few years ago gave me these discs and I assumed it was a picture. My mistake.

• I have always used the windows logo + L key to lock my computer, I remove things from my hard drive and now it locks not for me... need your help :)

  I have always used the windows logo + L key to lock my computer, I remove things from my hard drive and now it locks not for me... need your help :)

  Hi ddbowers01,

  The other shortcut keys work?

  Try pressing CTRL + ALT + DELETE and then try to lock the computer and check.

  Check the setting below:

  a. in the Control Panel, click user accounts.

  b. click on change the way users log on or off the power.

  c. Click to uncheck use the screen of welcome for a quick and easy connection.

  d. click OK.

  With regard to:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• My Vista computer has ceased to be able to print or use the windows photo gallery, or to be able to perform updates.

  Original title: non-functional computer

  my vista computer has ceased to be able to print or use the windows photo gallery, or to be able to run updates and I can't find any way to put this right - someone had something similar - it custom install service pack 2 for vista and it wont let me download a update Internet explorer 9 - also stop the program index - continues and the print spooler said it works but it doesn't will not print - any ideas?

  Hi John,.

  1. you receive messages or error codes when you try to print or to use the Windows Photo Gallery?

  2. What is the code of error or message that you receive when you try to install service pack 2 and Internet Explorer 9 download?

  3 did you recent hardware or changes to the software of the system?

  You try to perform a restore of the system to a restore point before you have been affected by the problem and check.

  Note: When you perform the system restore to restore the computer to a previous state, programs and updates that you have installed are removed.

  To run the system restore, you can consult the following articles:

  System restore

  System Restore: frequently asked questions

• Can I use the Windows key from another computer non-working on my computer?

  Can I use the Windows key from another computer non-working on my computer? I took the key of this computer and used on my current computer, but I get a message indicating that the key is not authentic, even if it is directly from a previously active computer.

  Original title: Activation

  Hello

  No.; If the operating system on the other came computer preinstalled (Dell, HP, Acer, etc.) you can't use it on another PC.

  If the laptop/computer came with preinstalled Windows operating system (Dell, HP, Acer, etc.), this product key provided with your computer/laptop to the OEM license preinstalled and is not transferable.

  OEM license/product key (systems of operating pre-installed on Dell, HP, etc.) is related to the first machine it is installed on and dies when dies of this machine.

  Only retail Operating System license that you buy and install yourself, are allowed to be transferred to another machine.

  And retail licenses also can be installed on a machine at one time.

  See you soon.

• What should I do to use the Windows Fax and Scan of my computer at home for my work fax #?

  What should I do to use the Windows Fax and Scan of my computer at home for my work fax #?

  Original title: Windows Fax and Scan

  What should I do to use the Windows Fax and Scan of my computer at home for my work fax #?

  A piece of hardware called a Fax Modem, installed in or connected to your computer with the appropriate device drivers from the manufacturer of the device, you have installed in or connected to your computer.    And a telephone line.

• I tried to format the C drive and then reinstall Windows Vista using the windows reinstall disk but I couldn't start in it.

  * Original title: reinstalling Windows Vista

  I tried to format the C drive and then reinstall Windows Vista using the windows reinstall disk but I couldn't start in it. I restarted my computer, press the F12 key and selected boot from cd/dvd, but the computer still started in windows. My computer is Dell. If there is no solution, it is possible to reinstall windows without using the disc?

  Hello

  Here are the options of relocation:

  How ro reinstall from the Dell recovery partition:

  http://www.Dell.com/support/troubleshooting/us/en/04/KCS/KcsArticles/ArticleView?c=us&l=en&s=BSD&docid=DSN_336966

  Reinstalling the printer Dell supplied disk:

  http://www.Dell.com/support/troubleshooting/us/en/19/KCS/KcsArticles/ArticleView?c=us&l=en&s=DHS&docid=DSN_339949

  ______________________________________________

  You can also borrow and use a Microsoft Vista DVD, which contains the files for the different editions of Vista (Home Basic, Home Premium, Business and Ultimate) must be installed. The product key on your computer / Laptop box determines what Edition is installed.

  Other manufacturers recovery DVDs are should not be used for this purpose.

  And you need to know the version of 'bit' for Vista, as 32-bit and 64-bit editions come on different DVDs

  Here's how to do a clean install of Vista using a DVD of Vista from Microsoft:

  "How to do a clean install and configure with a full Version of Vista '

  http://www.Vistax64.com/tutorials/117366-clean-install-full-version-Vista.html

  And once the operating system is installed, go to your computer manufacturer's website and get the latest drivers for your particular model or laptop computer.

  And phone Activation may be necessary when you use the above installation method.

  "How to activate Vista normally and by Activation of the phone '

  http://www.Vistax64.com/tutorials/84488-activate-Vista-phone.html

  See you soon.

• When you use the Windows XP Mode integration, it fails; maintains a new attempt and finally I have to cancel

  When you use the Windows XP Mode integration, it fails; continues to try again and finally I cancel it. The same newspaper for Virtual PC on the host computer has the following error message: Windows XP Mode integration error 'failed to connect in place inside the "Windows XP Mode" VM on channel 0 on the... named pipe endpoint XP, TCP port 3389 with the 0x8007274c error mode. This error occurs every time, but I don't know why he is successful a few times and sometimes fails. This question was in another post and mentioned the removal and resettlement components of integration, which I've tried, but it did not help. I also checked that I have the latest version of the integration components (v. 14.1.7600.16403). I have a separate instance of Virtual PC that I brought over my old XP machine and it was never a problem with integration. The problem with the image in XP Mode occurs also, regardless of whether or not the other Virtual PC image runs. Only the image of the XP Mode has this problem. I suspect it's perhaps a conflict of TCP port in the named pipe, but if so, I don't know how to solve. Thanks in advance to anyone who might be able to offer advice.

  Thanks for the reply. I tried to reinstall the integration features in the past, but the problem has come back at a later date. A few days after I posted this request for assistance, I needed to log out of Windows 7, so I hibernated the XP Mode image. Then, I opened a session in Windows 7 and thought I'd give it a try once again, and it worked this time! I did nothing special. So hopefully that will happen in the future, just as it went and on the past few months. Enjoyed your attempt to offer advice, however!

• Can I use the Windows Media player this Adobe pirate intead? How, please? E-mail address is removed from the privacy *.

  Adobe Flash Player prevents me to display videos because I don't want to share my personal computer storage.

  Wholesale! constitutional question here! Can I use the Windows Media player this Adobe pirate intead? How, please? Or any other way to overcome this in-your-face PEST hijacker - Adobe Flash? * E-mail address is removed from the privacy *

  Hello

  Flash Player and Windows Media Player are not interchangeable.

  Like many things on the web, the Flash Player local storage can be put to bad use. This does not necessarily mean the Flash Player without scruples or bad product - it's the sites Web/people who abuse of this (depending on your point of view).

  You can configure Flash Player to block local storage on your computer. This does not necessarily all the features of Flash Player - for example with my set of Flash Player to block local storage I can still see videos on YouTube.

  The controls for the Flash Player local storage can be found here: *

  Start-> Control Panel-> Flash Player (32-bit) (Tab instorage )

  There is a good explanation of privacy and local storage of Flash Player here:

  http://help.adobe.com/en_US/FlashPlayer/LSM/WS6aa5ec234ff3f285139dc56112e3786b68c-7fff.html#WS6aa5ec234ff3f285139dc56112e3786b68c-7ffa .

  I hope this helps.

  * You have not stated your version of Windows, so it's Windows 7.