Create graphics in actionscript

Similar Questions

• Create graphics using multi-channel for measures and another single channel for the datetime type.

  Hello world

  I'm using Labview and DIAdem to create graphical reports and I use screws of connectivity and not the Express VI.

  The data is stored in a data base MySQL Inno.

  I use the following command to get the data I want to show the graphic report!

  SQL_ExecDirect (' select 'TimeStamp', 'Value' by 'TableX' where and taste =' %s and channel =' %s; "" ")

  And then I use:

  SQL_BindChannel ("Datetime1C1", "TimeStamp", "t", "#yyyy - mm - dd hh") to bind the data to the X axis of the graph.

  And after that, I use:

  SQL_BindChannel("SampleN","Value","n") to bind the data to the axis of the graph Y.

  I want to create the chart with more than a sample, I use the commands above on a loop.

  Now here's a printscreen of my problem.

  

  In the first iteration (green line), DateTime1C1 has the timestamp for sample1 but in the second portion (yellow line) DateTime1C1 has the timestamp for sample2, the third iteration (blue line) DateTime1C1 timestamp for sample3. etc.

  The time stamp of origin for each sample are 'lost' he re-wrote datetime1C1. and in the end, it shows only the timestamp for the 5th iteraction.

  How can I create a single graph with several lines (samples) and datetime an axe?

  THX in advance

  Hi AlexandreHSCas,

  If I understand your situation, the only thing you need to change is to create a new group in the DataPortal before each request.

  FOR i = 1 TO iMax
  NewGroupName = "application" & I
  Call GroupCreate (NewGroupName)
  Call GroupDefaultSet (GroupCount)
  Call SQL_ExecDirect ("select 'TimeStamp', 'Value' from ' TableX" including Sample =' %s and channel =' %s;) ")
  Call SQL_BindChannel (NewGroupName & "/ Datetime1C1", "TimeStamp", "t", "#yyyy - mm - dd hh")
  Call SQL_BindChannel (NewGroupName & "/ SampleN", "Value", "n")
  NEXT

  Then you can simply drag each group from the data on the same graph XY-portal, because each group has its own time warp, data points will be displayed correctly placed on the common X axis of the graph.

  Brad Turpin

  Tiara Product Support Engineer
  National Instruments

• How to create graphic tabs in front of Panel?

  How to create graphic tabs in front of Panel? How can I use tabbed indicators in the front panel?

  Drop a control tab on the front.

  Move a chart on a tab.  You can add multiple pages of tabs by clicking on the tabs.

• View seeks to create graphic animations in the videos, the FCPX is capable?

  Hello useful community! A two-part question.

  I'm just getting started on the video production and have some needs in mind. I hope you can let me know if FCPX can do that hopefully, if there is an obvious solution, I am missing, or some of you approach use.

  I'll be doing a few videos of interview style and will have several camera angles, with that I need to work. So if I understand correctly to work with iMovie, I'll have a main video timeline and then 'cut' in and out secondary structures for the other angles. But I must have a logo sitting in the corner as well. Is there still enough chronologies to cut in different camera angles while having a timeline showing the stationary chart? iMovie does not you have only your primary and another calendar cut in and out, but I hope that FCPX has the ability to overlay 2 more than at a time? Or maybe I'm going about this the wrong way need?

  The second part is linked, I want to be the logo/text animation because it is (as a brief introduction). Not throughout the entire video or something extremely complex, but to animate shapes and text sliding in such that the name of the speaker, the name of show graphics, etc... And I'm hoping to create my own custom animations, not the familiar "motions of text" located in iMovie. I feel like the examples I found online that all look like they have animations the same model and I hope for much more creative in this area occasionally, if that makes sense. In its most simple example I guess, the design and animation capabilities/techniques you can do in Keynote for graphics/text that can be market timed, fades, slides, etc.

  Is FCPX the right program to incorporate more complex forms of text animations as well? Or is it the work of another software?

  I hope that makes sense. Any help is appreciated, thanks!

  Mark

  TYou can have an unlimited number of video layers.

  Yes, you can make custom animations. For more complex animations, you use Motion.

• Video format to create graphic buttons

  So my question is: what video file format is the best for a component video auto-play Muse?

  I want to do is have the two circles in the picture below (clickable links) seems to be automatic playback of video files, and I'm not sure of the best method to do this.

  My instinct is to use a GIF, but I feel that there must be a better file format that Muse is able to use. I'm a user of Photoshop and After Effects, so I have a plethora of options for creating the files, I just need to know what type is best for this Muse.

  

  ↑ This is a screenshot of what I want to be autoplay video/motion graphics.

  Thank you for your help,

  -Blake

  This has nothing to do with the Muse at all. You cannot use what is supported on the web - h.264 / H.265, Ogg, VP9, possibly more depending on the browser. and of course an animated GIF will do for short stuff, not too colorful. Apart from that, with the exception of GIF, your biggest problem will be actually load and play videos in a way so that they retain their link function, which means that the magic sauce is in the embed code.

  Mylenium

• Creating graphics in an HTML region

  Hello
  
  I'm on APEX 4.1 / 11g. I used the graphic function to create a chart and it works very well, however, the chart is created in a new region, if we use the wizard. I was wondering, is it possible to add the table to an html page or region in a location of our choice? I checked the source of the map and see a bunch of data, I was wondering if that pick up and sticking it in the html page works perfectly? or y at - it another way to do it.
  
  Thank you
  Sun

  Have you tried to experience the region display Points and columns.
  You will find these, when you change the region.

  Gus

• How to create graphic menus to context right click for ADF DVT?

  ADF DVT graphics supports right-click context menu?
  If so, how to create it for the ADF graphic DVT?

  What version of JDeveloper are you using?

  This feature is a new feature that is available only in JDeveloper 11 g R2 (the more recent)?

  Thank you
  Nini

• Simple function to create ToolTip in Actionscript 3

  Hello

  I'm new to Actionscript 3 and I'm creating an application in which I need to use tooltips.  I thought it would be simple because in VBA and other object-oriented languages, you have a tooltip for a button and all property you need to enter the text (or even schedule it, which is very simple).  However, I can't seem to create tooltips in Flash using AS3, I tried 6 different methods (fairly complex) from code I found online but could get any of them to work.  Can someone please give me a simple function that takes as parameters the ToolTip text and the original button, then the right function creates the ToolTip automatically once it's called? Any help would be greatly appreciated. Thank you.

  If the two functions add and remove are on the same timeline you will not see this error message.  but I see typo:

  create a buttonObj for all your buttons

  var buttonObj:Object = {};

  //////////////////////////////////////change nothing above ////////////////////////////////////

  the next 3 lines must be made for all your buttons

  buttonObj [yourbutton] = ['Hello', 2, 2];

  yourbutton.addEventListener (MouseEvent.MOUSE_OVER, addToolTipF);

  yourbutton.addEventListener (MouseEvent.MOUSE_OUT, removeToolTipF);

  change nothing below.

  function addToolTipF(e:MouseEvent):void {}

  var a: Array = buttonObj [e.currentTarget];

  var tf:TextField = new TextField();

  buttonObj [e.currentTarget] .push (tf);

  TF. Text = a [0];

  TF. Multiline = false;

  tf.autoSize = "left";

  TF. Border = true;

  addChild (tf);

  TF.x = a [1] + e.currentTarget.x;

  TF.y = a [2] + e.currentTarget.y;

  }

  function removeToolTipF(e:MouseEvent):void {}

  removeChild(buttonObj[e.currentTarget][3]);

  buttonObj [e.currentTarget]. splice (3,1);

  }

• Guide the fool to create graphics?

  Hello

  I'm new to LabVIEW (using v8.5.1) and have a question about plotting a graph on the front panel.

  I have a vertical slider that has an applied basic formula. It's all in a while loop. How can I draw out of the scabbard (once the formula is applied) against time on a graph on the front panel.

  A graph of the waveform will not let me connect to the output of the formula (automatically show it as a cut wire), and if I use a waveform table I just get a horizontal line with the x-axis increases quickly. If I move this line moves to the top and to the bottom of the y-axis. The time on the x-axis value seems to go up to 10 ^ 6 very quickly when you use the graphical waveform block...

  Any suggestions on how I can do this, while the graphic display, say, 100 seconds of data that updates in real time the cursor is changed? I tried locking of the scale of the x-axis, but it doesn't matter.

  Thanks for the help :-)

  How often are you writing to the cursor/chart? If it's in a while loop with no wait function, then you update several thousands per second. The table has a size of default buffer of 1024 points. Once you have reached this number, the old data are ignored. In addition, the default delta t of the x-axis is 1, so you must change the dt parameter to match the rate of loop in order to accurately represent the hour.

  How many times do you really need to update the slider? To view the 100 seconds of data, you would set the size of the buffer at least equal to 100 * samples/s. So, if you had an expectation of 100 ms in the loop, it means that 10 samples per second * 100 to a buffer size of 1000. The default setting would be sufficient. Set the sampling rate of 10 milliseconds and you need a buffer of 10,000 points. To change the buffer size, right-click on the chart and select "Chart History Length". To make sure the x axis reflects your actual sampling frequency, you can right click, select scale X > properties > Sacles and change the value of the multiplier. You can also programmatically. Look at the example of navigation called real time graph.

  PS, It's not a good idea to have a while loop without some sort of waiting. Spinning constantly loop will be used a lot of time cpu windows and prevent you to interact effectively with the controls on the front panel.

• How to create graphics with the constructor syntax

  How you can use the XXXBuilder class to generate graphs? I have this code:

  NumberAxis xa = NumberAxisBuilder.create().lowerBound(0.0).upperBound(10.0).build();
  NumberAxis ya = NumberAxisBuilder.create().lowerBound(-10.0).upperBound(10.0).build();
  ScatterChart<Number, Number> chart = ScatterChartBuilder.create().XAxis(xa).YAxis(ya).build();

  But I get:
  error: the reference to create is ambiguous, the method create() in RegionBuilder and < X, Y > method create() in ScatterChartBuilder match
  ScatterChart < number >, table = ScatterChartBuilder.create (). XAxis (xa). YAxis (ya) infrastructure ();
  ^
  where X, Y are variables of type:
  X extends the object declared in the < X, Y > method create()
  It extends the object declared in the < X, Y > method create()
  
  How can I resolve the ambiguity?
  
  Pete
  (it's 1.7.0_06 JDK, JavaFX 2.2.0 - b21)

  Probably a bug in the ChartBuilders or the JDK.

  ScatterChartBuilder.create().build(); // does not work either.
  

  javac is unable to determine if the create() method of SceneChartBuilder or the create() method of RegionBuilder must be applied.
  The AxisBuilders arising also from RegionBuilder work because they do not identify their own obscure create with generic type information method.

  How can I resolve the ambiguity?

  New ScatterChart ;-)

• Creating graphics

  Hello, I have problems creating charts from data that is stored in a Datagrid (I managed to create graphs of data normally stored)

  The problem arises when I need to fill out these cards of data stored in the datagrid control

  Anyone has any idea how it should be done?

  Here are the datafields in the grid of data where values are either entry form to the user.

  < s:GridColumn width = "200" dataField = "Sequin" headerText = "Combinations" > < / s:GridColumn >

  < dataField = "row" headerText = "Row" s:GridColumn > < / s:GridColumn >

  < s:GridColumn dataField = "mach" headerText = "Machines" > < / s:GridColumn >

  < dataField = "prod" headerText = "Parts Prouduced" s:GridColumn > < / s:GridColumn >

  < dataField = "cost" headerText = "Cost" s:GridColumn > < / s:GridColumn >

  < s:GridColumn dataField = "lqq" headerText = "Avg parts waiting in the system" > < / s:GridColumn >

  < s:GridColumn dataField = "wqq" headerText = "Queue time" > < / s:GridColumn >

  < / s:ArrayList >

  . What needs to be done to put in the table as I want to trace GL entry and line

  Thanks for your help

  Have you tried MyChart.dataprovider = MyDataGrid.dataprovider

• Create remoteObject with ActionScript, no MXML

  I want to use remoteObject with ActionScript only, no MXML:

  private function initializeRemoteObject (): void {}
  _distante = new RemoteObject;
  _remote.source = "AMFProxyObject";
  _remote.endpoint = " " http://localhost/linktoMyAMFServer ";
  _remote.destination = 'zend ';
  _remote.showBusyCursor = true;
  }

  public function getIAllData (): void {}
  initializeRemoteObject();
  var token: AsyncToken = _remote.getAllDataFromStoryTable ();
  Token.Result = getDataHandler;

  I'm stuck here because I don't know the proper syntax to handle the result
  }

  private void getDataHandler () empty

  {

  ;//

  }

  I want to just convert the MXML below in ActionScript code.

  < mx:RemoteObject id = "zendRemoteObject" destination = "zend" source = "AMFProxyObject".
  " endpoint =" http://localhost/linktoMyAMFServer "         
  result = "resultHandler (Event)" >
  
  < name mx:method = "getAllDataFromStoryTable" result = "getDataHandler (event)" / >
  < / mx:RemoteObject >

  Thank you very much. It's driving me crazy, as I couldn't find any help online by Google.

  Try to use an answering machine, specifically an AsyncResponder.

     var token:AsyncToken = _remote.getAllDataFromStoryTable();
  
     var responder:AsyncResponder = new AsyncResponder( resultHandler, faultHandler );   token.addResponder( responder );
  
     public function resultHandler( event:ResultEvent, token:Object=null ):void   {      Alert.show( "RESULT: "+ event.result as String );   }
  
     public function faultHandler( event:FaultEvent, token:Object=null ):void   {      Alert.show( "FAULT: " + event.fault.message );   }
  

  The following documents may be useful:

  http://www.flexafterdark.com/docs/ActionScript-responder

  I hope this helps...

  Ben Edwards

• Unble to create graphics in curves with different years

  Hello
  I am trying to build a line chart where I should show each year (2008,2009,2010,2011), a line with the number of rooms that I have, in order to make a comparison.
  Bar graph is fine, but the chart seems weired.
  If I understand the months, it looks better, but once again a line for all years.
  
  In the link, you can see what it looks like
  
  http://a.imageshack.us/img828/682/lines.jpg
  
  Thanks and greetings
  Giuliano

  I would create 4 measure in the criteria tab

  filter ( using year = "2008")
  ... with year = "2009")

  and so on... use any measure 4 in the chart and you wil get one line per year.
  Does that help?

• Creating graphic elements 14?

  Is anyone know where the title and background animations download within the program? I have several versions of the software and want to download all of the images only once, so they can be used in offline mode.

  Adobe Dayton Dan

  What computer operating system?

  Assuming that Windows 7, 8, 8.1, or 10 64-bit...

  Local disk C

  Program data

  Adobe

  First Elements

  14.0

  Online

  Rich title templates

  All_Lang

  Please let us know if it worked for you. If this isn't the case, please provide details.

  Thank you.

  RTA

• Request Express - create graphic interfaces

  Can anyone help me please with creation of GUI APEX Oracle?
  
  Where to go?
  Perhaps some simple examples?

  Start from here .

  There is a lot of documentation, examples and links.

  André