Create ISO VMS

Similar Questions

• How to create .iso without conversion of .dmg files

  Hello it is well-established if a person possesses a .dmg file and trying to convert multiline to the command line, commands and you're done. But is there a similar way to how a person can create a .dmg files/files file using disk utility to create a .iso file without having to create .dmg and then convert into .iso? Y at - it a 3rd party app that can do this, or perhaps do it directly from the command line?

  Thank you

  MelRay

  Too bad, I was getting a lot of hits from google to create the .iso to a cd/dvd, etc.. But there is a way of the command line to do this as well, so I'll post it for those maybe with the same question. This is done from a terminal of course window. Enter the following text:

  hdiutil makehybrid -o ~/Desktop/image.iso ~/path/to/folder/to/be/converted -iso -joliet

• Create ISO update Win 2003 to Win 2008 R2 (fully patched)

  Is it possible to create an ISO installed windows 2008 r2 that contains all relevant patches or specially selected? I have hundreds of windows 2003 servers that I need to upgrade to 2008r2 and I would like to install a full version of Windows 2008 r2

  This issue is beyond the scope of this site and must be placed on Technet or MSDN
  http://social.technet.Microsoft.com/forums/en-us/home

  http://social.msdn.Microsoft.com/forums/en-us/home

• Inventory point settings to create ISO planned order

  I have several manufacturing companies, but some items are made exclusively to an individual.  When the request is created in one of ent sale that makes the question, I want an ISO to be created to transfer the product from the production org in the org of sale.  What settings should I for MRP/ASIC create an ISO when I release a planned order?  Make or buy = buy?, Sourcing all of 'transfer' Mfg org?

  Hello, Jessica,.

  According to the pre-required configurations necessary for your requirment

  • -Set items as brand elements,
  • -To define their Nomenclature and the itinerary changes
  • -Defined rule sourcing and assign it to all the assignment, associate this assignment set to the CPSA plan in plan options (transfer back and forth MFG organization)

  Kind regards

  Surya Nagarjuna

• Not enough disk space when creating ISO from DVD image

  I use first elements 14.1.  I encountered a very strange problem when you try to create an ISO image DVD, editing content in the available space (space required is 4.35 GB 5.12 Mbps throughput).  I get the message ' not enough space for the engraving', even if the drive I use has more than 1.5 TB of free space!  All files work in Premiere Elements are on this drive.  I cleaned all the relevant elements of the first, work folders before attempting to create the ISO image.

  Here's the weird part... If I try to create an ISO image of a Blu - Ray disc, editing of content space (space required is 18,87 GB to 20.19 Mbps bitrate), I don't get the error message.  I can create the ISO image of Blu - Ray with no problem!

  I tried to reboot several times.  I completely uninstalled EP 14.1, rebooted and reinstalled with the same results.

  Someone at - it ideas?  Has anyone ever encountered this?

  The running time is 1 hour 50 minutes.  I chose "Insert the contents of the available space", just as I did when creating the ISO from Blu - Ray.  PE shows that seeks to create a 4.35 GB file, which should easily fit on a 4.7 GB DVD.  I just tried open the same project on another computer and the same generation of PE, with the same result.

  I think I discovered a bug freak EP Version 14.1 (20151208.daily.895401).  The exact length of the film is 1:50:16:08.  I discovered that if I increase or decrease the duration of the video of just 1 frame, I is no longer the mistake and am able to successfully create a picture ISO of DVD!  Go figure.

  I would be interested to know if anyone else can duplicate this fault!

• Using Automator to app to create. ISO

  Hello

  I have an Applescript that is very useful for the use of ffmpeg to convert video files.  Of course, in this script is a Terminal script to actually run ffmpeg.

  It looks like this:

  the term {parameters}

  Tell application "Terminal".

  activate

  filesString the value «»

  Repeat with file_ in entry

  the value filesString filesString & "" & quoted (file_ POSIX path)

  end repeat

  do script "for f in" & filesString & ";" do. "

  / Users/Mike/Documents/Scripts/ffmpeg - i \"$f\" - acodec pcm_s16le - vcodec v210-level 1 - Encoder 1 - context 1 - qscale 1 g - 0 ${f%.*}.mov.

  tell the end

  Back entrance

  end of race

  It works really well for just a file on the app and do run.  But now I want to create ISO from DVD images that I created in the past.  The above script searches the path of entry and in the output path of the new file with the same name.  I want to do a couple different things.

  First of all, I cannot of course back the new file on the DVD but I don't know how to change the script correctly, but I've highlighted where I think we should probably change. In addition, I want a prompt the user to choose a destination.  I was really close with:

  "myPath choose the folder with the value prompt" choose a folder:

  It would be nice to both the value of the path and the name of the file at that time.

  I also like that I can see the status of the creation of the ISO in the Terminal.

  I take a very basic course to learn Applescript, but I'm still not there. Help please?

  I have a few comments...

  There is nothing inherently wrong with your script - it is essentially collecting all the data, and then firing a shell single command to do the job. The problem is that to extend the functionality to create a .iso, you must do this within the shell command.

  An alternative (more easy - at least for an experienced AppleScripter) way would be to reduce to a minimum the shell command to the bare (i.e. treat as an individual file) and use AppleScript to manage the closure and variable. For example, rather than build a chain of files and passing to a shell command that iterates over it, I'd do something more like:

  say application "Terminal."

  activate

  Repeat with file_ in entry

  filesString game to quoted form of (path of file_ POSIX)

  script "/ Users/Mike/Documents/Scripts/ffmpeg - i" & fileString & "- acodec pcm_s16le - vcodec v210-level 1 - Encoder 1 - context 1 - g 1 - qscale 0"& fileString & ".mov".

  end Repeat

  end say

  
  

  You have now each specific file in an AppleScript variable (file_), which is passed to a shell command that executes your order. Several input files only invoke the command shell several times. This makes it much easier to add treatment by folder

  Regarding the other issue - selecting the location/name of output file, simply replace your folder "Choose" with "Choose file name." This will allow the user to specify a file name and a directory using the standard user interface, from which you can extract the data you want:

  Repeat with file_ in entry

  -This establishes name of input file:

  say application "System events".

  put nomfichierentree to the name (obtain the properties of file_)

  end say

  -prompt the user for where this file should be saved

  outputFile to choose the file name prompt "specify output file name for" & nomfichierentree

  inputFilePath game to quoted form of (path of file_ POSIX)

  outputFilePath game to quoted form of (POSIX path of outputFile)

  say application "Terminal."

  activate

  script "/ Users/Mike/Documents/Scripts/ffmpeg - i" & inputFilePath & "- acodec pcm_s16le - vcodec v210-level 1 - Encoder 1 - context 1 - g 1 - qscale 0"& outputFilePath.

  end say

  end Repeat

  
  

  Also note that I've separated the code in more sense (to me, at least) pieces... I have separate application logic regarding input and output files and target just Terminal.app with the specific commands that relate to it.

  
  

  From there, you can easily integrate additional orders to "do script" to do what you want, using the same variables to map the input and output file names.
  

• Re: Satellite L300-1BV - create your recovery disc ISO images

  I wondered about this.
  Could make my recovery disc ISO images, I know I could just make a few extra copies, but I am learning to create ISO images.
  But I was a little worried about what would happen when I put a disc in the drive...

  This along with the recovery image is a bit complicated, and something like this is not possible.
  All you can do is create recovery DVDs using Toshiba recovery disc creator or directly start the HARD drive recovery using recovery Toshiba (F8) option.

  You can do with it what you want but how you want to start the installation later?
  Sorry, but I think that it will not work.

• create the image of dvd or iso file

  Windows 7 pro how can 64, I create an ISO file or a picture of a dvd?

  Try using WinToFlash and Windows 7 USB/DVD download tool to create bootable Windows 7 USB drive.

  http://www.microsoftstore.com/store/msstore/HTML/pbPage.Help_Win7_usbdvd_dwnTool
  http://WinToFlash.com/home/en/

  How to create an ISO Image of CD, DVD, or BD file (on the PC Support Web site): http://pcsupport.about.com/od/software-tools/a/create-iso-image-file.htm

• Cannot create DVD or DVD ISO or DVD folder - first 13 items

  Have elements first 13.  I create each format, but the DVD format.  I can create all of the HD files without problem.  When I ask to do the DVD, it goes through the process and wrote completed, but it didn't actually burn anything on the DVD.  The DVD is still blank.  If I followed the it, is yet to create necessary temporary file on my hard drive before putting it on DVD.  So I tried to create ISO of the DVD and it will not create it.  It will say full but no files will exist in the assigned directory.  Then I tried to do the DVD file and he will say also filled but there is no file in this directory either.

  I tried uninstalling and reinstalling, but I get the same results.

  BUT if I re install my v10, everything works fine.

  My computer is a Dell XPS with tons of memory and a core i7 high so I know I have the power and storage is not a problem.

  Running Windows 8.1 PRO 64-bit

  My DVD burner is a MATSHITA DVDRWBD UJ167AM - do not know why it might be that because it will not the ISO or DVD folder.

  I tried to do this with my virus checker off also.

  Can anyone help?

  Thank you!

  philvong

  Please go to edit Menu/preferences/general and determine if the problem exists with or without the Intel HD Graphics 2000 and top off. Does make a difference in the burn of the situation for the DVD-VIDEO?

  Please indicate if this question if for AVCHD and DVD-VIDEO, is to go on the DVD or just the DVD-VIDEO disc.

  Thank you.

  RTA

• Can I install Windows 10 of Bootcamp Asst USB created by car?

  I received the message at the opening of Boot Camp-

  "The startup disk cannot be partitioned or restored to a single partition.

  The startup disk must be formatted in a single volume in Mac OS extended (journaled) or already partitioned by Asst Boot Camp to install Windows. »

  My boot drive in the form of a Mac OS extended (journaled) volume, so I clicked on OK, but then the 3rd box on the screen select tasks has been grayed out, so I couldn't check "install or remove Windows 7 or later version, so I let the 1st two boxes checked and ran BCA to"create a Windows 7 or later version install disk"and"download the latest software of Apple's Windows support. After I had option to stop smoking, not install a partition or any other thing.

  Now, when I boot with the Boot Manager, it shows my OSX HD, the EFI boot drive and a Windows disc.

  When I select it, message says «start on Boot Camp Asst USB» created by car... »

  What happens when I leave the reader to perform the installation of Windows 10?

  It will create a Windows partition?
  If this is not the case, where it will install Windows? on my OS x 10.11 startup disk? or what?

  Note: The USB key created by car was created iso Windows 10 that I downloaded as a developer of Windows which can be used without a license key.

  I've used it with Parallels Desktop without any problem.

  Rerun the BCA and check if you can click on only the Option install. If it is greyed out, OS X Terminal, please after the release of

  diskutil list

  Cs diskutil list

• Creating image using disk utility

  Hi - I am trying to create an image file of and CD Audo to later burn multiple copies (I own the rights on this CD).

  The process I use is to load the CD in the drive SuperDrive, open disk utility and select the disk in the sidebar (curiously, the drive itself is not there, just the disk). Can I go to file = > new Image == > Audio CD Image. Select a destination, Format: unalterable, encryption: no) and click Save.

  He done much work slowly disk reading and writing of the file (Audio CD.dmg). However, if I try to open the file when it has finished, it said "no mountable file system" and if I burn it to a CD - r disc resulting almost blown my speakers with the sound. To check, I tried with a commercial CD as well - same result.

  I'm doing something wrong here. He doesn't know he used to work in previous versions of the utility.

  System: Mac Pro early 2008 OS X Superdrive Pioneer (original Apple) El Capitan 10.11.5.

  Hello

  There is a little powerful 3rd party app called 'Burn '. Older applications, it's works well in El Capitan as well. If you decide to download and install, you will need to go to preferences > Security and privacy to allow him permission to run for the first time. After that, he will not ask you again. It is simple and easy. Create .iso and burn. Create and burn data/audio CDs and copy CDs as well. There are a few 3rd party applications which are worthy of Mac, and this one is. The name of it, is once again, 'Burn '.

  Bravo!

• Sonic RecordNow is able to burn the .iso Image files?

  I can't believe this. I might be Toshiba Satellite L20 205 is Record now Version 7.31 basic Sonic and has no facility for burning image (ISO format) on my CD/DVD files, unless and and util I move to Deluxe v7.3 for an additional price of $30.

  If this can be true? Save and burn disc button images takes me directly to the upgrade link on the Internet.
  This is the first time I came across an OEM bundled, disc burning trying to strip me for a simple job like burning the .iso files software?
  Am I missing something?

  Hello

  I don t use the sound recording now to make an iso file because I m user of Nero.
  I love this program. But back to Sonic.
  As much as I know Sonic doesn't supports this option. It doesn t create iso files.
  You can use it to create audio CDs from files on your HARD drive, convert audio CDs to MP3, create a Toshiba CD-ROM, CD copy, etc.

  If you want to create iso files, you must use another application like Nero

• Recovery disk. ISO?

  Is it acceptable (legal, etc.) and possibly to create a. A manufacturer of PC WIN 7 recovery disk ISO image and burn a disc so I can install on old remains portable hard drive via a USB adapter cable. When I try to use the recovery disk, I bought manufacturer, that it will not allow to install via a USB adapter cable. I hope that I could work around this problem by creating a bootable CD or live and by installing this way via a USB adapter cable but I have'nt has found a way to create a. ISO image of the recovery still floppy.  I'm not even sure manufacturers recovery disk will allow disc be turned into one. ISO image. In this case I still don't know exactly how to create the recovery disk ISO (disc; who files etc.).  There are 2 recovery (disc 1 & disc 2) disks and there is also a copy discs in a folder in the computer. I already spoke with the support of the manufacturers, and that they do not have a problem with me make an image ISO they have not all the tips on how to do it. I tried a couple of creators of image (Daemon Tools; CD BurnerXP, without success. Any input would be appreciated gratefully.  Thank you very much.             P.S. I am not forum read and write; I hope I sent this to the right place

  I have moved your question to the Windows of the feedback topic area.

  I assume that you bought the recovery disk is designed for the PC you are trying to use it with the option - in other words, it is provided by this provider of PC.

  You should be able to create ISO using any number of CD/DVD burning tools. If the ISO that results can be used to restore this PC is another question.

  If you are looking to use ISO (or the original recovery disk) to get Windows on a 2nd drive, it would be against the terms of the license for Windows.

  -steve

• HCIBench test VMs does not start

  I ran HCIBench successfully in the recent past against a VSAN data store and a HP StoreVirtual data store, now I'm trying it on some hardware Nutanix to compare, but running in the questions. I know that DHCP is working because the VM Auto-Perf-tool picked up one address, but when I run a test, the test VMs starts not in their operating system.  Just after contact with the DHCP server, it gets a "no received startup file" as shown below.  The DHCP server also does NOT show the leases issued to test virtual machines.  Any one see this before? Any suggestions?

  Thank you

  

  Just to finish this point, I don't check that HCIBench cannot be run on hardware with shared storage on ESXi Nutanix Nutanix.  I found myself just to create some VMs VDBench and executed manually VDBench, I just lost out on the OWL as automated hcibench of deployment and communication of the cool results, but at least I get my test results.

• Workflow for creating a reservation vCAC

  Hello

  
  We need power created several VMs computers on request.  We must isolate access to the virtual machines, and our current approach is to have a separate business
  group/reservation for each virtual computer computers.  We do not want to have a large number of reservations predefined.  Is there a way that we can create a vCAC
  booking as part of an workflow?  If not, is there another method suggested in order to have several machines of several virtual machines while still limiting access
  for each of them?

  
  Thank you!

  Sorry, grabbed the wrong file.  Here is the action to create a reserve:

  /***************************************
  Create a reservation
  * Entry parameters:
  * String businessGroupName
  * vCAC:vCACHost iaasHost
  * String eSXIHostName
  * String reservationName
  * Integer memorySize
  * Integer storageSize
  *
  ****************************************
  */

  Name of the model used
  modelName = "ManagementModelEntities.svc"; var

  links with other tables / objects
  Var links = null;

  no required header
  var headers = null;

  Get the entity Business Group
  Entity set that matches the Group of companies is called ProvisioningGroups
  entitySetName var = "ProvisioningGroups";

  Create the property object that contains the input value: market
  Var properties = {GroupName:businessGroupName};

  Reading/retrieve the existing business group entity; There must be exactly one
  var businessGroupEntities = vCACEntityManager.readModelEntitiesByCustomFilter (iaasHost.id, modelName, entitySetName, properties, null);

  If (businessGroupEntities.length<= 0="" )="">
  System.Error ("Business Group:" + businessGroupName + "not found.");
  error code = businessGroupName + "does not exist";
  Jet businessGroupName + "does not exist";
  }

  System.Debug ('Business Group');
  System.Debug(businessGroupEntities[0].keyString);
  System.Debug(businessGroupEntities[0].) GetProperty ('GroupName'));
  System.Debug(businessGroupEntities[0].) GetProperty ('GroupID'));

  Get the eSXI host entity
  entitySetName = "Hosts";

  Create the property object that contains the input value: eSXIHostName
  Var properties = {HostName:eSXIHostName};

  Retrieve the existing business group entity; There must be exactly one
  var eSXIHostEntities = vCACEntityManager.readModelEntitiesByCustomFilter (iaasHost.id, modelName, entitySetName, properties, null);

  If (eSXIHostEntities.length<= 0="" )="">
  System.Error ("host eSIX:" + eSXIHostName + "not found." ');
  error code = eSXIHostName + "does not exist";
  don't launch 'no eSXI host. "
  }

  System.Debug ("eSXIHost");
  System.Debug(eSXIHostEntities[0].keyString);
  System.Debug(eSXIHostEntities[0].) GetProperty ('HostID'));
  System.Debug(eSXIHostEntities[0].) GetProperty ('HostName'));

  If (businessGroupEntities.length > 1) {}
  System.Error ("Business Group:" + businessGroupName + "found" + businessGroupEntities.length + "duplicates, cannot link to a reservation");
  error code = businessGroupName + 'has duplicates, cannot link to a reservation ";
  throw ("Business Group:" + businessGroupName + "found" + businessGroupEntities.length + "ambiguous, cannot bind to a reservation" "");
  }

  System.Debug ("found Business Group:" + businessGroupEntities [0] .getProperty ('GroupName'));

  System.Debug ("found eSXI host:", eSXIHostEntities [0] .getProperty ('HostID'));

  Create a reservation
  entitySetName = "HostReservations";

  Links = {ProvisioningGroup:businessGroupEntities [0], host: eSXIHostEntities [0]};
  var headers = null;

  var testResProperties = {}
  HostReservationName:reservationName,
  };

  Check that no reservation exists with the same name for this group of companies
  var existsRes = vCACEntityManager.readModelEntitiesByCustomFilter (iaasHost.id, modelName, entitySetName, testResProperties, null);
  If (existsRes.length > 0) {}
  System.Error ("booking:" + reservationName + "exist already;) Cannot create duplicate");
  throw ("booking:" + reservationName + "already exist;) Cannot create duplicate");
  }

  hardcoded for tests. should become the entry fields
  var reservationProperties = {}
  HostReservationName:reservationName,
  Enabled: true,
  ReservationMemorySizeMB:memorySize,
  ReservationStorageSizeGB:storageSize,
  MaxVMsPowerOn:99,
  ReservationPriority:1
  };

  create booking
  var resEntity = vCACEntityManager.createModelEntity (iaasHost.id, modelName, entitySetName, reservationProperties, links, headers);

  check the entity created booking
  If (resEntity == null) {}
  System.Error ("ERROR: entity of booking" + reservationName + "not created");
  throw ("make a booking" + reservationName + "failed" "");
  }
  Check a reservation by retrieving the entity
  var testRes = vCACEntityManager.readModelEntitiesByCustomFilter (iaasHost.id, modelName, entitySetName, reservationProperties, null);

  If (testRes.length< 1="">
  System.Error ("ERROR: entity of booking" + reservationName + "not found");

  Return the new booking
  System.log ("reservation created:" + reservationName);
  return (resEntity);