HCIBench test VMs does not start

Similar Questions

• HCIbench - vdbench VMs does not start

  Hello team Performance VSAN

  I am currently trying to run HCIbench on a VSAN cluster and have some problems. Everything seems to work fine until the moment after the vdbench VMs are deployed and configured. Opening the console they are all showing with "the operating system not found '.

  • The VMs VDbench are connected to a network segment that has a DHCP server, which I know works as the Auto-Perf-tool is picking up an IP address from the DHCP server on this segment.
  • I use the vdbench50403.zip file.
  • Validation happening on 'Performance Automation tool Configuration Page'
  • The/opt/automation/logs log appears with the following text:

  

  • The Auto-Perf-tool has 2 network cards, a routable which I can access from my browser and one connected to an isolated segment that has a DHCP server, where all the VMs vdbench are also connected to.

  Any help would be appreciated!

  Thank you

  By

  I managed to understand this one. The auto-perf-tool seems to need direct access to the hosts, i.e. the vCenter-access alone was not sufficient. In my environment, the auto-perf-tool had direct access to the vCenter which is dual homed and have access to hosts on a separate management network. Changing the vCenter so it connects to hosts on the same network as the auto-perf-tool is resolved the problem and the hcibench now works fine!

• NB just by making the effort test and does not start backup

  HP dv7-4177 started having types, wouldn't restart. I tried to test that are inbeded and when I did the stress test he stops and does not restart. I hit the power button and nothing happens. I took the hours of battery sevealr and handed over in but I have nothing seems to help.

  Hello Nutn Spec.  I understand that your notebook is currently unable to boot.

  What kind of questions you know before performing the stress test?  This will help me identify the cause of the problem.

  Have you tried to do a hard reset?  It drains all the residual energy of the laptop and hardware reset forces.  If you haven't tried this before I would suggest trying the following.

  1. Make sure that the laptop is completely turned off.
  2. Remove the battery and AC power.
  3. Press and hold the power button for 15-20 seconds, three times.
  4. Replace the battery and AC power.
  5. Try to start Notepad.

  Let me know the result.  I will keep an eye out for your answer.  Have a great night!

• Emergency situation!  Modified processors, VMs does not start

  Help!  I just changed a 5570 to a 5670 processors.  The VMs rand fine for awhile, but then frozen.  Now I can not feed their place.  The two processors are the same except for the number of cores.

  you've restarted the management on the ESXi host agents where this comment is registered?  In addition, you tried to remove the comments from the stock and then browsing the data store and do a right-click on the vmx and "add to the inventory?

  also, take a look at the article

  http://KB.VMware.com/kb/1022046

• Computer XP does not start all of a sudden. Drive hard Self Test error #1-07 Fail. How can I find the meaning of this error of hard disk?

  Computer XP does not start all of a sudden.

  My computer is a HP Lap Top Model zd8000 bought in 2006.  Never had a problem with it before.

  Drive hard Self Test error #1-07 Fail.

  How can I find the meaning of this disc hard test error message?

  Thank you

  I tried the suggestion using chkdsk/r

  The computer ran for a long time, but the computer worked once the process is complete.

  First thing I did was back up my data, I was real worried.

  Thank you very much!!!

• CD player passes all tests but the computer does not start from cd player

  CD player passes all the tests, but the computer does not start from cd drive. entered the bios and it specifically indicate to boot from the cd drive. Windows 7 installation disc does not start. Win 7 disk works in another computer to start. Why is it not this cd player read the disc and from the win 7 installation process?

  I see this problem on systems having older IDE and SATA drives requiring firmware updates and assigned to the region 1 aka they boot from XP CD, but not DVD windows 7or media.

• MacBook Pro-life extendable start-up chime, but does not start

  I have a start 2011 15 "MBPro8, 2

  Quad Core Intel Core i7

  2.30 GHz

  Boot ROM version: MBP81.88Z.0047.B2A.1506082204

  Intel HD Graphics 3000 VRAM:512 MB

  AMD Radeon HD 6750M VRAM:1 GB

  8 GB of RAM 1333 MHz DIMM0

  It will not start.  Trying to start the machine, it enters a loop-

  1. startup chime

  2. grey screen with Apple

  3. the small wheel starts to turn under the Apple

  4. the screen goes black

  ... and the cycle starts over.

  The computer does not start in Mode safe.  In an attempt to safe mode the loop above has the addition:

  3. a progress bar is displayed but does not progress.

  I have reset the PRAM

  It will start up in target Mode, so I was able to recover data

  In target Mode, I was able to run first aid utility on the drive.  This has not fixed the problem.

  I can hold down the Option key and see Macintosh HD and the recovery Partition.  If I try to boot from the recovery partition, I get the same loop.

  I can start in the Test of online material, which revealed no material problems

  I can boot in Verbose mode and it always happens in the same place

  Execution fsck_hfs (version 226.1.1 of hfs)

  BootCacheControl: cannot open /var/db/BootCache.playlist: 2 no such file or directory

  ' ' It would be possible for me to insert the "var/db/BootCache.playlist" file using target disk mode?

  Other thoughts?

  Have you tried resetting the SMC?

  Reset the management system (SCM) controller on your Mac - Apple Support

• Firefox does not start until the wifi is active

  I'm trying to use the latest firefox (v32) on Debian/testing/64-bit by using the 64-bit version of FF... This machine is a laptop and is used only with wifi. The wifi that is usually used is a Starbucks or McDonald's who require a click on a Web page before the connection is enabled... When I start FF to be able to select this check box, it does not start. a look at the ps - xua shows firefox as a zombie/missing process... How I work around this, is to use Google Chrome to shoot to the top of the Web page, click on the box, then almost immediately the instance FF I tried to launch rises... If I clicked on the icon of the FF once more, I get more window a FF... It seems that FF needs a pipe open to internet before it will start. I prefer FF on Chrome, but if I have to use Chrome to "Kick-start" FF, I might as well delete FF and just use Chrome... Any ideas?

  UH... This problem occurs on Linux... It IS not IE (thank God)... The proxy on FF and Chrome settings are identical, namely NO proxy configured...

  I've come up with a workaround.. Switched out the Linux drive with my pretty unused Windows 7 disk.. Where this problem with Firefox doesn't occur.. I'll check back in a few months with FF on Linux and see if one of the endless "updates" has magically fixed this problem.. Thank you for the help anyway..
  

• 2006 iMac does not start. Help restore

  I have an Intel iMac core duo with iSight and built in disk drive around 2006. It does not start.

  When I turn on, it sounds and passes to the gray screen with the apple logo and a progress bar or a spinning wheel. Then he stops down. I tried all the troubleshooting and nothing works. In addition, I don't have the disks that originally from cane with the computer. So I can't make a diagnosis of the hardware. (Unless someone is willing to sell me their album hehe).

  This problem happened to me in 2012. I had a friend restore the computer to empty the hard disk, then boot from the snow leopard disc and reinstall everything. It worked like a charm.

  In 2013, a disc is stuck in the drive. I have troubleshooted only and nothing has worked. I assumed that the drive is dead and has continued to use the computer without worrying about that. Then, in 2014 someday when I restarted, the disk jumped! I never tested the drive then because I was afraid of another stuck disc. Then, the computer is dead again as he did in 2012.

  SO I know what to do. I need to wipe the hard drive and start over. However, I didn't have a drive. So, I bought one on eBay. When I insert it, the computer enters the disc. I can hear the mechanics works. It ejects even properly. However, I can't boot from the drive. When I start the iMac by pressing option, I don't see the Macintosh, no disk drive.

  My hard drive died? If so, a USB dvd drive would work? If USB does not work, how can I replace the drive?

  Is it possible that I bought a drive bad or fake software and that's why I can't boot from the dad?

  Please help in some way!

  Try a boot sure try safe mode if your Mac does not end commissioning - Apple Support

• Firefox does not start (not safe mode), but uses the CPU

  I have the latest Firefox 25.0 (and the last Flash 11.9.900.117) on Windows 7 and the following behavior is reproducible. It started not too long ago.

  At first when I launch Firefox, nothing appears no matter how often, I restart. I see in the list of the process firefox.exe to 25% of the CPU, 2 x FlashPlayerPlugin_11_9_900_117.exe (CPU 0%) and plugincontainer.exe. No matter how many times I killed all of them, would not restart Firefox.

  The following also not help in this situation:

  • Starting in normal safe mode: Firefox opens a window but immediately freezes and does not respond. The process list shows the same process even if I find the unexpected FlashPlayer.
  • Disable plugincontainer: same results (just without plugincontainer.exe)
  • Uninstall Flash: Same results (just without FlashPlayerPlugin)

  The following can start Firefox only once:

  • Starting in SafeMode but select "Reset Firefox": Firefox does not start right away, however. Nothing happens, and you have to kill the process. However the very next time you launch Firefox in the normal way, it works fine (but it shows FlashPlayerPlugin.exe in the list of unopened Windows process despite the tab). Unfortunately, after closing Firefox the process (Firefox, FlashPlayerPlugin) are not deleted. I kill and the problem with Firefox do not leave reappears.

  In case you use "clear history of Firefox closing:

  • do not delete Cookies

  Note that compensation "Preferences of Site" clears all exceptions for cookies, images, windows pop up, installation of software and passwords.

  Use "Firefox > output" (Windows: Firefox/file > quit;) Mac: Firefox > quit Firefox. Linux: Firefox/file > exit) to close Firefox if you are currently doing by clicking on the X close in the title bar of Firefox.

  Create a new profile manually (and not via the reset) as a test to see if your profile is the source of the problems.

  See "create a profile":

  • https://support.Mozilla.org/KB/Profile-Manager-create-and-remove-Firefox-profiles
  • http://KB.mozillazine.org/Standard_diagnostic_-_Firefox#Profile_issues

  If the new profile works then you can transfer files from a profile in the new profile, but be careful not to copy files corrupted to avoid transporting on the problem.

  • http://KB.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

• Toshiba Q300 480 GB HARD drive does not start after migration

  Hello

  I bought a disc of Q300 489 GB to replace a small 840EVO of Samsung. I used the toshiba tool to clone the smallest to the largest player. However when the clone is finished and the reboot of the machine the machine hangs just at the start of the process (before starting windows 10). If I go back to my little samsung it starts without a problem.

  I tried to treat twice with NTIEcho and also tried with Partition AOMEI tool, all attempts have failed to start on the Q300 drive.

  I am just tempted to refer the reader to Ebuyer, getting another Samsung. Maybe Toshiba can tell me how to get the drive working properly?

  Regards Sean

  PS. can someone direct me to a page where I can raise a ticket of Toshiba, I would be grateful. There seems to be some links broken on the UK site.

  Hello.
  Do you have an error message when the operating system does not start? Appearing in AOMEI Partition Wizard you have been used during the replacement of the Samsung drive?
  After the largest disk cloning, you may need to change the boot settings in the BIOS or to remove the previous Samsung drive to test.

• Satellite A300 - rotates but does not start

  Hello

  I have a Satellite A300. I had several probems for the boot since 2 months ago: when I want to turn on my laptop, it turns on but the screen keeps black and it does not load the screen "Toshiba Leading Innovation". 'Satellite' (to the left of the mouse) light is on (it would go only about a second then to start and then turn off) and it will turn off.

  I try again for so many times with all the possibilities: without battery, only with the power adapter, two, but it does not start. I don't know what I can do. I always Hibernate my laptop because I'm afraid of can not start it the next day.

  Could you help me? If she cares: I had to buy a new battery (not original from Toshiba) because I had to change the original. No more changes to my laptop.

  Thank you very much and sorry for my English written: S

  Diego

  Hey Buddy,

  > I had to buy a new battery (not original from Toshiba) because I had to change the original. No more changes to my laptop.
  Of course, it s always advisable using Toshiba original spare parts only, but if you notice the same problem with AC adapter only it s not related to the new battery.

  Just to make a better diagnosis: If you have connected an external monitor? The internal display is perhaps the problem and doesn't turn on and it would be useful if you are testing the situation and an external monitor.

  But this noise as a hardware problem serious and in this case, you can wait to contact an authorized service provider. Technicians professional diagnostic tools to make an accurate diagnosis and to Exchange defective equipment parts.

• Pavilion a6532me: a6532 Pvillion does not start

  When I turn on, PC freezes in the start screen.  I can no longer enter System Recovery, Set Up or Boot Menu now.  BIOS v5.43. Before I could, and diagnostic tests gave everything OK.  Tried to boot from a disk OS Win7, but does not start from a DVD.  Drive light flicks on twice on power on, then turns off completely.  All this a few weeks after updrading to W10 - PC W7 from hang up with drive light permanently several times.  If it was a problem with HD, it surely would boot from a DVD? All advice welcome.  THX

  Disconnect the hard drive and then power the system on. Sometimes a failing hard drive will cause weird problems.

• DVD - ROM Toshiba Recovery disk does not start

  Hello

  I'm having some problems with my Toshiba Satellite M40, and I decided to reinstall the OS with the recovery of the dvd disk, but the disk does not start.
  When I'm on windows, the cd/dvd driver works perfectly, and I don't think that the recovery of the dvd disk are damaged.
  I have already tried:
  1. by pressing the "C" key to start the computer
  2 - press "F12".
  3 - Enter the BIOS Setup and select cd-rom to start first

  But the computer starts up normally and no error message appears

  Can someone help me? I don't know what to do

  Thank you

  Hello Palma

  Can you please test it with some other bootable CD or DVD? It will be interesting to know if this happens with the recovery media only or even with other bootable media.

• Satellite L40-139 does not start

  ? 19/02/2014 18:41 - edited? 19/02/2014-18:45

  Hello, I have a problem with the SATELLITE L40-139

  the thing is when I press the power button / stop, hard drive led will begin to Flash, CD-ROM led is lit and the screen is black. I noticed that advise in the CD-ROM makes a sound ICT in the same way the hdd led flashes (when it flashes I hear a tick form CD, yes I unfolded any computer laptop).

  I can only say that I have connected my PC HARD drive and it's working., good fan is not working too, but I think it will start, after some time (as he always did)

  Notebook crash circumstances are now saying: that a year ago, he fell from 1 inch (such height ;]) I saw that the ribbon cable connecting the touchpad to the mohterboard was broken and my diidn can't start computer, I thought that there's a problem, but I forgot and left the laptop for more than 9 months (with hard disassebled and battery and cd-rom drive) and then I decided to try to turn it on.
  And viola! It works it boots etc.

  After a month of being happy, I'm drunk I couldn't sit on the Chair and I decided to sleep with my laptop on the bed, I lied right down and put the laptop on my belly and it crashed (screen freezes) so I decided to reboot, but it does not start.

  Here is a video with what I get when turning the power on it: [http://www.youtube.com/watch?v=jC0pGBBVwJk] (not Fortunately my phone fell in the mud and shifts when I record videos)

  Some people suggest I should connect an external display to see if theres no picture but the result is always the same. (Screen not even fuels not on)

  Maybe someone could help me fix without sending it to the customer service.

  See you soon.

  On this virtual path, it is not easy to say what the problem is here. Of course, you can try to do some tests and try to make some conclusions which may be wrong. After his last stop somewhere I think that there is big problem with graphics card. Of course I can't say it for sure.

  Diagnosis just exact mainboard can offer answers. I m afraid mainboard is dead and must be exchanged.