Create multiple quizzes which add score

Similar Questions

• creating a total which adds 1 days, 2 odd days

  I have a spreadsheet of numbers that keeps the total stocks of drugs race which calculates how many pills are left and gives the date they run out.

  It is based on a start date and the stock of departure and has always worked fine where the same number of each pill is taken every day.

  I now have a complication when a type of pill is issued 1 one day, 2, 1 the next and so on alternately.

  I need a formula that lowers the left over stock every day by one or two depending on whether it is an odd day / pair

  It should be relatively simple, but I just can't get my head around it.

  any help welcome

  Without the screenshots, it's hard to guess how you have your document updated in place, but according to your description, you could do something like this:

  

  The table below simply illustrates the push model as you describe.  If that is correct, then the calculations could be as shown in table 1.  The formulas used in column B are shown in column C.

  The formula with the ROUND function simply assumes that a pill is given every day then add half (because an additional pill is added every day) and rounded to the nearest integer.

  SG

• I am creating a total field contingent in a PDF form created by me which will only add cost in total ONLY if the box is checked.  Another disadvantage to this is one of the fields (number of monitors), I am eager to multiply by the field notes.

  I am creating a total field contingent in a PDF form created by me which will only add cost in total ONLY if the box is checked.  Another disadvantage to this is one of the fields (number of monitors), I am eager to multiply by the field notes, which is a field required number on there.

  All of them are select___

  Here are all the names of FQDN (towards the bottom):

  Check the boxes:

  • selectiPhone
  • selectSwipe
  • selectMonitor
  • selectDesktop
  • selectLaptop
  • selectiPadCell
  • selectiPad
  • selectPhone

  Fields of costs:

  • CostiPhone
  • CostSwipe
  • CostMonitor
  • CostDesktop
  • CostLaptop
  • CostiPadCell
  • CostiPad
  • CostPhone

  The notes field that will calculate this is "NotesComputer Monitor in notes". -It is a body of numbers forced the inability to put anything else in it.

  Then add them all in TOTAL COST

  Sorry for my ignorance: it's my first time doing a form like this.

  Please see below for the screenshot.

  

  Dropbox - conditionalSum.pdf has the answer

• How can I create multiple fronts for a single diagram?

  Hello

  I developed a VI with several controls and indicators that should run on computers with a screen from 800 x 600 to 1680 x 1050 resolutions. The problem I have is that the façade don't is not properly for this range of resolutions by checking the options in 'Properties of the VI' option. Is there a way to create multiple panels before in various sizes for my diagram and select the façade appropriate in accordance with the resolution of the screen programmatically?

  See the attached Zip file.

  I have two different facades.  Either one open and run it.  They call MainCode.vi that takes the references which is past and register for events.  From there on, he does all the work of the code that you would put in your façade .vi.

  In this way each façade can be arranged however you want for each screen resolution.

• How to create multiple CSS navigation bars?

  Hello

  How to create multiple CSS navigation bars?

  I currently have the code below (and it works very well) for a navigation bar, but I'm trying to create navigation bars .  Can I just change the 'nav ul li a""NAV ul li b"(note the 'a' change to a 'b') or something similar?  I can not understand the correct coding...

  Thanks in advance for any help!  I very much appreciate quick and precise Adobe support team answers!

  NAV ul {}

  margin: 0;

  padding: 0;

  }

  NAV ul li {}

  list-style-type: none;

  float: left;

  Display: block;

  height: 60px banner;

  Width: 333px;

  text-align: center;

  line-height: 55px;

  do-family: Arial, Helvetica, without serif.

  font-size: 33px;

  }

  NAV ul li a {}

  text-decoration: none;

  color: white;

  }

  NAV ul li: hover {}

  background-color: rgb (0,0,255);

  }

  NAV li: hover ul a {}

  Display: block;

  color: white;

  }

  No, the 'a' you see is an html element, , you can not change this.

  It's very simple.

  You can create a class, the name you want (I used .yourclass), add it to the second

• Create multiple Copies of a field - Mac

  I'm trying to make multiple copies of a field using DC on a Mac. Directions/support indicate that I should 'right click' on the ground - which, of course, cannot be done on a Mac. So, how can I create multiple copies of a field on a Mac?

  In general, all directions to create shapes guess I'm on a PC. How and where can I find instructions to create forms with DC on a Mac?

  Thank you

  Laurent

  Hi Laurent,.

  Please let me know the model of operating system version and hardware to your mac.

  Please refer to this link, it "might" help with your problem of click right mac - http://www.wikihow.com/Right-Click-on-a-Mac

  I have reproduced this issue for you on my mac, please refer to the below the screenshot and let me know if you still face a challenge.

  

  and this would lead to the following window:

  

  Now it helps to? Do not hesitate if you still have questions.

  Kind regards

  Rahul

• How to create multiple hierarchies from the same physical table

  Hi all
  
  I have a physical table to join with a fact table: there are 3 different hierarchies, which share the last 2 levels inside the dimension table. It's the logic diagram of hierarchies:
  
  Dimension services
  -Business
  -Sector
  -Type
  -Operator
  -Product
  Partner of dimension
  -Partner
  -Operator
  -Product
  Contractor of dimension
  -Contractor
  -Operator
  -Product
  
  All columns are in the same table physical source. I tried to create 3 table logic source from the same physical table, everyone with all the columns and create a hierarchy for each dimension table, but it gives me nQSError: 15011.
  
  Any suggestion? Maybe the physical table alias can help for the creation of tables of different sizes?
  
  Thanks in advance,
  Concerning

  Hello

  It is a basic rule that you cannot create multiple hierarchies in a single dimension table, so what you do is create three tables of alias and slip into MDB layer in 3 different sizes and on top these tables create 3 different dimension hierarchies.

  Check if useful/correct

  Thank you.

• Can I create multiple dynamic entries during execution?

  Can I create multiple dynamic entries during execution?
  
  Oracle 11g
  Request Express 4.0.2.00.06
  
  Here's my problem:
  We have a table that contains metadata about the files (paper or electronic).
  We hope that we can need more columns in the table at some point and do not want to change the table or the application.
  
  So to do this I would like to create:
  
  A table called TBL_FILE with columns:
  NUMBER of TBL_FILE_ID (this will be the primary key)
  TBL_FILE_NAME VARCHAR2 (1000) (this will be the name of the file)
  
  A second table will be called TBL_FILE_META with columns:
  NUMBER of TBL_META_ID (this will be the primary key)
  NUMBER of TBL_FILE_ID (this will be the key to forign to the files table)
  TBL_META_COLUMN VARCHAR2 (30) (this is what would be the name of the column if it existed in TBL_FILE)
  TBL_META_VALUE VARCHAR2 (1000) (this is the value of this record and the column "would be")
  
  If a person can have as many meta data in the file to add columns to the table.
  The problem is how can I allow users to add as much data as they wish with them having to re develop page.
  
  Other things to note is that we would like this be on one page.
  I know how to add we can create inserts several rows using a SQL (editable report).
  However the TBL_META_VALUE in the TBL_FILE_META column will sometimes be a selection list and other times one text box or a numeric field.
  So I don't see now a SQL (editable report) would work for this and I can't create a table of elements on the page running I can?
  
  No idea how I might accomplish this? Is there a better way to do this?
  
  It is a term or a name for what I'm doing by creating these "virtual" columns in another table?
  I found this method looking at the workflow tables Oracles.

  Welcome to the Oracle Forums!
  >
  Can I create multiple dynamic entries during execution?

  Oracle 11g
  Request Express 4.0.2.00.06

  Here's my problem:
  We have a table that contains metadata about the files (paper or electronic).
  We hope that we can need more columns in the table at some point and do not want to change the table or the application.

  So to do this I would like to create:

  A table called TBL_FILE with columns:
  NUMBER of TBL_FILE_ID (this will be the primary key)
  TBL_FILE_NAME VARCHAR2 (1000) (this will be the name of the file)

  A second table will be called TBL_FILE_META with columns:
  NUMBER of TBL_META_ID (this will be the primary key)
  NUMBER of TBL_FILE_ID (this will be the key to forign to the files table)
  TBL_META_COLUMN VARCHAR2 (30) (this is what would be the name of the column if it existed in TBL_FILE)
  TBL_META_VALUE VARCHAR2 (1000) (this is the value of this record and the column "would be")

  If a person can have as many meta data in the file to add columns to the table.
  The problem is how can I allow users to add as much data as they wish with them having to re develop page.
  >
  Creation of dynamic Page elements is not available. You must create surplus items and hide/show, etc. But you cannot change the element Type. Overall, too many restrictions in this approach.
  >
  Other things to note is that we would like this be on one page.
  >
  The limit of 100 points will hit you if you go with extra page element. With the form of tables that should not be a limitation, unless you're exceeding the limit of 50 APEX_APPLICATION point. G_Fnn points and limitation of the 60 column of the region report with "(analyze the query executing only) use generic name column" in the dynamic region.
  >
  I know how to add we can create inserts several rows using a SQL (editable report).
  However the TBL_META_VALUE in the TBL_FILE_META column will sometimes be a selection list and other times one text box or a numeric field.
  >
  If the type if the item is variable, that doesn't mean that you have to type a way to store the item. Metadata of meta data.
  >
  So I don't see now a SQL (editable report) would work for this and I can't create a table of elements on the page running I can?
  >
  Yes, you can do it. Update report / query in a table can be built from the metadata using the SQL query that returns the PL/SQL function . It will be a bit of coding in PL/SQL where you use metadata and metadata of Meta data to restore your SELECTION with the right APEX_ITEMs. He might have a decrease in performance associated with it, but it will not be a serious degradation.
  >
  No idea how I might accomplish this? Is there a better way to do this?

  It is a term or a name for what I'm doing by creating these "virtual" columns in another table?
  I found this method looking at the workflow tables Oracles.
  >
  I guess it's just a good TNF. This is the master model / retail Design, sounding more modern? ;)

  Kind regards

• Creating multiple instances of a custom taskflow: how?

  I use JDEV 11.1.1.5.0 and we use WebCenter PS4.
  
  
  Our previous developer created a calendar countdown / count down timer. When I try to create a copy of it from within Web Center Mashup > task flow page I have a few problems:
  
  1. If I change the settings of task flow, such as the title or the time format (minutes, hours, or days are the options) - these changes do not appear on the page itself. He always uses the same values as the original task flow that I copied from.
  
  2. I've noticed that in the Page Fragment and the definition of the taskFlowId Page points to "/ WEB-INF/ScheduleWidget #ScheduleWidget. Id = "' is the same for each completed copy of the original workflow."
  
  
  What I would do, is to have the ability to create multiple instances of this workflow even at the breast of a single space, but right now they are the only things that stop to occur.

  Hello

  JavaScript does not have workflows and so is not isolate the invocations to son. Bottom line is that your use of JS must be improved.

  Actually what you are calling a single JavaScript function, which will exist only as a single instance on the page. What you need to do is rather than for each call JS workflow, you must create a separate JS object that is then used with this workflow. Ultimately you would have as many instances created JS object as task on one page (at the moment you don't have that, and instead, you use a single variable). As I see it, what you have to do is

  -for starting workflows, call JS in Java (or a region controller)
  1. create a new object ' cdtime ($(this) new.attr("id"), ' ${pageFlowScope.counterDate} ");
  2. register the object in a variable of page with a key identifying the workflow as it is used with/for the
  -Workflow then use you the client listener to access the timer for this workflow. For example, you can pass an argument to the JS function so that he knows which instance of timer for your registry level JS page object (probably a map)

  Frank

  Published by: Frank Nimphius, February 23, 2012 10:33

• If I go to a website and it Add on of States necessary. How can I find out which add on is necessary

  If I visit the following website http://www.cannonclevelandfunerals.com on my Samsung Galaxy 10.1
  Tablet of the part with the States of photo to an add-on and the portion of the screen with photos
  is empty. How will I know which add-on is required. I added the HTML5 module, and many who have to make the video, but not luck. It still does not work. If I look at the site on my computer, everything is OK. I also installed on my mobile firefox browser to fake.
  Thank you

  SHAKYNOT

  I tried to download, works of nothi, g

• Which add on that I have to disable in order to open my emails?

  One day, I was unable to open emails in hotmail. After reading some chatter of firefox support, I disabled all add ons and started firefox in safe mode. After that, I was able to open e-mail messages without problem.
  The question I have is: How can I find which adds on is responsible for not allowing me to open my mails in hotmail? I hope there is a solution more simple and faster than the "trail and error"?

  Thank you

  Martin

  Trial and error looks like the only way to solve this problem.
  I recommend trying to disable Flashblock or fast Java extensions first.

  If error not working, reply to this message and we will have to try some combinations.

• Why my photo album create multiple folders and duplicate my photos in folders?

  Why my photo album create multiple folders and duplicate my photos in folders?

  Can you give us more details about your problem? When this happens? It's an update of iOS for a newer version?

• How or can I create multiple new folders instead of doing one at a time?

  original title: create multiple new folders

  How or can I create multiple new folders instead of doing one at a time?

  The number of cases, where you want to create, and what you want to call them?

  You can create a group of folders by entering commands in a command prompt window.  For example, to create a folder for each day of the week in C:\Users\Public:

  CD /d c:\users\public
  for %d in (Mon, Mar, sea, game, Fri, sat, Sun) do mkdir %d
     Boulder computer Maven
  Most Microsoft Valuable Professional

• Word documents: Is there some Word Documents created in Vista which cannot be open in XP?

  Is there some Word Documents created in Vista which cannot be open in XP?

  Following the correct advice of Ken Blake MVP, here is the link for the Office Compatibility Pack Ken Blake MVP mentioned:

  http://www.Microsoft.com/downloads/details.aspx?FamilyID=941b3470-3ae9-4aee-8f43-c6bb74cd1466&DisplayLang=en

  "Open, edit and save documents, workbooks, and presentations in the file formats Open XML, which were introduced in Microsoft Office Word, Excel, and PowerPoint beginning with Office 2007."

  See you soon.

  Mick Murphy - Microsoft partner

• BPEL is create multiple instances of a single HTTP OSB call

  Hello

  Here, I describe how looks like my flow of integration.

  
  (1) proxy OSB service calls service BPEL (HTTP protocol for help)

  (2) BPEL called two services to OSB using HTTP calls (these two OSB services will insert the data into two tables)

  (3) according to my testcase an OSB service should be managed and second service OSB must fail, so any integration does not work as expected

  (4) but the second OSB service takes 2 minutes when inserting data into the database

  (5) in 2 minutes BPEL is creating an instance more

  How to stop creating multiple instances.

  Thank you and best regards,

  Harsha.

  Automatic recovery is enabled by default in bpel, you can try catch the fault. You can also change the value of MaxRecoverAttempt please go through this link: https://svgonugu.wordpress.com/2013/05/08/auto-recovery-feature-in-bpel/

  Kind regards

  Anshul