create new file save as dialog box

Similar Questions

• Showing the full path of the file in the Save as dialog box

  I'm a relatively new for MAC OS and I took the habit of intelligent services on Microsoft file manipulation, in particular to the Save as dialog box. Who has a little smart "arrows" and "buttons" allowing you to ask around the system of files easily, but I faced something else in the MAC operating system.

  Finally, I was able to pass on the path of file bar in the Finder (basically, that nice, small bar with the name of folders/sub-sub-sub-folders you can switch to and it shows "where you are both in the file system"), but I don't miss the Save as dialog box. I tried to find it in the settings to turn it on, scoured the internet, talked with experts at Apple, also called the central phone number, but I couldn't learn all solutions to get the bar path of file under tension to the Save as dialog box.

  And believe me, it's very annoying, when you create a file structure when you register under ' week/Tuesday/XY client Documents/work/approvals/journal/2016/August/2nd /' a file and for the recording of the version changed the same file under the same path, but not to not only return to the file a subfolder creation there AB of the customer, I have to click again through the whole lot.

  The arrows 'story' don't help because when I click on the it puts me directly to record under the folder where I have the last recorded the previous file, or help click on the drop-down above, where records are listed because I could never find the subfolder where I want to go back to there.

  Are there solutions to get the path of file under tension to the Save dialog box under?

  Or is there a plan to get it in the new version of the operating system?

  It is the same on the open file dialog box...

  ..., and I don't want to keep a Finder opens just to copy..., on the way to the record, which was the same effort and has been even more professional!

  I would like to just turn this simple file path bar,..., even that which is available in the Finder!

  Any ideas would be appreciated, thanks for sharing your thoughts in advance, Ian

  Imre of Glen Waverley wrote:

  Are there solutions to get the path of file under tension to the Save dialog box under?

  Or is there a plan to get it in the new version of the operating system?

  It is the same on the open file dialog box...

  1 NO.

  2. we are all just users here and have no info about Apple's plans.

  If you do not want to let Apple know your feelings, you can send your comments here.

  http://www.Apple.com/feedback/

• Save as dialog box slow to create, rename folders

  When you create a folder in any window save as with any program the interface stalls for about a minute. In fact, even right click in ANY other window that Windows Explorer itself causes the program to stall. So, whenever I want to create a folder when you save a file, or rename a file or folder, I must first of all open the Explorer and then back to the desired program and browse to the new location.

  She did not used to be the case. I turned Windows Search because I thought that indexing could be the cause of the problem but nothing helped.

  What could be the problem and how can it be solved?

  Think about the answer given does not address the issue, I've seen this phenomenon and seen it discussed in several forums.

  A good suggestion is the "stall" is probably caused by what you're asking to do... i. e the list of folders in which you can save the machine, and usually causes the access time of network volumes or drives slow to take more time for a list of cached directories.  In addition, a mapped drive that is not available will cause a very long time and is the cause of this behavior. If the delay you see is probably caused by the application that attempts to find for caching records available.

  Click Start--> computer and remove the network grows with a red 'X' or go to tools (press the alt key if you do not see the menu) and select network drives disconnect and then select them (those with the 'X' in red) and disconnnect the one at a time

  If you can not remove the network here try drive then via the command prompt start-> type CMD in the search field and hit back or in the line to run in XP etc...

  NET use h:/d

  where, instead of "h", you specify the drive that needs to be deleted.  Then restart.

  A more radical approach would be to leave a cmd prompt

  NET use / persistent: no

  but I think this removes all of the shares of persistent network at the next reboot.

  I'm still looking, but it may be a way to change the registry so that it does not cache directories of network share, or you can alterantively does not map directories.  In both cases, try this and I think you should see an improvement in the Save in dialog box.

  Either way, if you get an error that it cannot remove the share you specify you must always restart, it should have restarted.  If not, well you have a new problem in google, bing, altavista, etc using the search engine of your choice.

  Good luck and stakeholders MS, please make greater efforts to meet your users... you really think that msconfig is where you want to send your users first?

• How can I call Save as dialog box before you download pdf files?

  How can I call Save as dialog box before you download pdf files?

  Here's my favorite scenario:

  1. the user clicks on the button

  2 Save as dialog box displays

  3. the user chooses the place

  4. a set of PDF files download here OR download a single zip file

  Background:

  I want to ensure that the user sees that the files are downloaded. I'm content to users who are not Web warned.

  Concern:

  1. the user has no idea how to find the downloaded files or files have even downloaded.

  2. I would like to deliver all in the form of zip files. Not sure if the automatic opening of zip files still exist.

  FOR INFO:

  I use jQuery UI buttons. Not sure if that factors in the response.

  Just for clarity, I'm not forcing a download. The user will click on a button.

  Click on a button or click on a link, either way you are technically running a script to force a download.

  I guess that's the PHP on the server.

  Yes but it is only a part of it.  Once the form runs, another script is called that opens the browser download dialog.

  Y at - it a php script to call the open/save dialog box?

  Yes.

  Name this file zip2download.php.

  Add a link to your HTML page:

  zip2download.php">Download the Zip

  Nancy O.

  ALT-Web Design & Publishing

  Web | Graphics | Print | Media specialists

  http://ALT-Web.com/

  http://Twitter.com/ALTWEB

  http://ALT-Web.blogspot.com/

• Could not open the PDF outside the browser without "Save as" dialog box.

  Hello

  We have currently upgraded Acrobat 8 standard, Acrobat 10.1.6. On our old version of Acrobat, when we unchecked the option in the preferences - Internet - view the PDF in the browser, it would open files in a new window, Acrobat.

  With X installed, we don't seem to have this option more. Things turn one of the two following ways:

  Display in browser checked = PDF is displayed in the browser (IE9)

  Uncontrolled browser display = save as dialog box appears when you click the link in the browser

  It doesn't seem to be the solution we front aircraft, where there is enough to open the file in a new window, Acrobat.

  Are there any settings that would back this expected behavior of my user?

  Thanks in advance,

  John

  Hello

  Browsers are evolving so quickly (a few months) it was impossible to keep this work in all browsers. The setting is left as is his preference of registry.

  There is a cmd line property that works. See the Administrator's Guide: www.adobe.com/go/acrobatetk.

  HTH,

  Ben

• I can't find 'save to desktop' in the Save as dialog box to an Excel on Win7

  In fact I do not see how to save any kind of file on my desktop with Win 7 and MS Office 2007 Pro.

  The game, February 3, 2011 15:44:39 + 0000, Maryriver wrote:

  I have not posted in forum excel because this problem occurs in all my MS Office 2007 Pro programs.  When I follow your suggested steps:

  "Open Excel > click on the Office button > Save As > close from the top left, click MORE > see icon on the desktop now? ' > click on the desktop.

  There is that no more save it as only includes orders for the economy in several formats, but the dialog box that opens shows not the desktop as the destination to save in.  The only affected destinations are;  models, Favorites, libraies, residential, computer group, WIN7C and network.  I explored all the and can not find any "desktop."

  Desktop is not listed under Favorites on the left side of the Save as
  dialog box? Simply click on it.

  But note that I strongly recommend against save data files in the
  desktop computer. My recommendation is that you put nothing else that shortcuts on
  the desktop computer. There are two things wrong to put the real files it:

  1. one day probably will remove you a real file, thinking that you were
  just remove a shortcut.

  2. you you cluttering up the desktop with too many files, making it difficult
  to find what you are looking for.

  You have to put your files Excel (and other real data files) in the
  Documents folder. If you have some of these files you want
  access often, put shortcuts to these files on the desktop.

  Ken Blake (MS-MVP)

• Strange group in Save - as dialog box

  When I open a Save-as dialog in a number of different programs, I get a very strange group, I've never seen elsewhere:

  

  The files are grouped into segments: other, A - H, I - P Q - Z and 0-9.  It started recently and I don't know how or why it began.  More frustrating is that I can't figure out how to disable this option!  The only thing I can see that might make it is in the upper right corner, the View Menu icon, when I click it, the auto arrange item is selected but grayed out.

  Any ideas how to disable this option?

  Thank you

  Right-click on an empty area of the list of files in the dialog box record under .

  Place your cursor on the entry of Group by ,

  Select none.

  

• "Save as" dialog box constantly answer

  I am currently using Windows 7 RC1 and Office 2007 Enterprise. Whenever I try to use "Save as" dialog box and select that option, the window simply unresponsive, and I must close the dialog prematurely.

  I've improved ro Windows 7 Window Vista recently and also have installed service pack 2 office. But I don't know who is behind the problem that I have not used this feature for quite awhile.

  You have an idea to solve this problem?

  Hi, TMB,

  Please post your response on the community forum is ready for Windows 7.

  The information said, you know the size of the partition, that documents are being saved?  Is it possible that files are focused to save on the recovery partition and not the usual Windows partition.

  You are in dual configuration with Windows 7 and Windows XP?

  It is perhaps that the size of the partition is not enough to save the file to.

  Please keep us informed of other suggestions.

  Kind regards

  Debbie
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Save as dialog box is empty after the document scanning

  After the digitization of documents, when I go to the file menu and save, the dialog box is empty.  It was only intermittent, now it's all the time.

  Hi johns18225944,

  Please try to uncheck the "Show when saving files from online storage" option in the Edit menu > Preferences > General.

  Click OK at the bottom to save the settings and then try to save the file.

  Let us know if it works.

  Kind regards

  Meenakshi

• Photoshop cs6 shifts when creating new file

  When creating a file the program is lagging about 4 to 7 seconds, when I save the file and re - open, there is no lag, at the opening of the older files is no this lag as well. When looking at the CPU usage, it seems to choke when creating new files. Does anyone have the same problem? I've updated photoshop and all my drivers. My system below features:

  Windows 10

  I7 - 4790 k

  GTZ 780

  16 GB of ram

  OK, figured out, this is the plugin extensis font management, I update that I have to leave for now, but now the system is back and catchy as usual, thanks to all.

• Message box in function that returns a list deletes the created list... (Dialog box)

  Hello

  I work with a complex dialogue, its purpose is to manage a section in the PDF file.

  I use a "mclv" object in the dialog box to represent data entries in the PDF file in order to manage the result in another section.

  I created a function that creates the list based on a previous section in the PDF object, the function works perfectly well.

  But I have a small question, the function used to create the list of the dialog box object performs a check with the former front list created, as appropriate,

  and if in any case it is different from the old list, I need to warn the user that the list has changed and if there were any changes applied to the result it will be returned to zero and must be recreated.

  But when the poping that message box, all lists are deleted and nothing is displayed in the objects 'mclv.

  If I remove the message box, the lists are all very well...

  Is there anyone who have come across something like this before? If so, any solution to this problem?

  I asked my question a bit too quickly, I already found a work around

  But I still don't understand why he behaves like that tho...

  I just thought how to work around this problem.

  If anyone has encountered this problem can use this solution:

  Instead of having the message inside the function to return box, I declared a global Boolean variable to the Script object

  If the message box must be displayed, the Boolean value is set to True

  Once in the initialize event of the dialog box, if the value Boolean true I call the message box and reset the value Boolean false

• I'm trying to reduce the file size of a jpeg file, but the dialog box under image > image size reflects a much smaller that the file is. I saved the image after resampling and by reducing the size of the image, reduced the pip to 72 and lowered the qua

  I'm trying to reduce the file size of a jpeg file, but the dialog box under image > image size reflects a much smaller that the file is. I saved the image after resampling and simplistic image, the pip size reduced to 72 and lowered the low quality only to see the minimum file size reduction. Why the dialog box in photoshop gives me a different file size than my computer and how do I solve this problem? Thank you!

  The Image Size dialog box dialog box shows the uncompressed size.

  Your operating system (Explorer/Finder) shows the size compressed. (size on the disk)

  If you use save for Web, you can see the compressed size, but also an overview.

• I want to create new files every 2 seconds of "write in a measurement file.

  I am a beginner of LabVIEW; I want to create new files (with similar names like test_01.txt, test_02.txt...) to 2 seconds interval using "write to a measurement file.

  In fact, it should be a question. Join the program that you have problems with. The subject was discussed several times as you should have found examples when you did your research.

• 0 blocks free PTR - cannot create new files on the data store

  We have been experiencing problems trying to power on virtual machines. When attempting to power on virtual machines, we see the error "cannot extend the pagefile from 0 KB to 2097152 KB".

  We checked the .vswp file are created in the folder of the Virtual Machine on the data store. Connection to the ESXi host, we have seen the following in vmkernel.log error message:

  (2016 01-16 T 21: 19:40.556Z cpu1:4971732) WARNING: Res3: 6984: "freenas-6-ds": [rt 3] No. Space - has not found enough resources after the second pass! (requis_:_1,_trouvé_:_0) 2016-01 - 16 T 21: 19:40.556Z cpu1:4971732) Res3: 6985: "freenas-6-ds": [rt 3] resources t 0, e 0, PN 16, BM 0, b 0, RCs u 0, i 0, 4031 nf, pe 0, 0 2016-01-16 T 21 oe: 19:40.556Z cpu1:4971732) WARNING: SwapExtend: 683: impossible to extend the pagefile from 0 KB to 2097152 KB.

  This was surprising given that we have about 14 TB of space available on the data store:

  [root@clueless:~] df h

  Size of filesystem used available use % mounted on

  VMFS-5 20.0 T 5.4 T 14.6 T/vmfs/volumes/freenas-six-ds 27%

  However, when we use "dd" to write a 20 GB file, we would get "no space left on device:

  [root@clueless:/vmfs/volumes/55a00d31-3dc0f02c-9803-025056000040/deleteme] dd if = / dev/urandom of = deleteme bs = 1024 count = 2024000

  DD: writing "deleteme": no space is available on the device

  263734 + 0 records in

  out 263733 + 0 reviews

  [root@clueless:/vmfs/volumes/55a00d31-3dc0f02c-9803-025056000040/deleteme] ls - lh deleteme

  -rw - r - r - 1 root root 19 Jan 255,1 M 01:02 deleteme

  We checked that we have free inodes:

  The ramdisk name system include in reserved Coredumps used Maximum reserved free use pic free maximum allocated Inodes used Inodes Inodes Mount Point

  ------------------------------------------------------------------------------------------------------------------------------------------------------------------------

  root of true true 32768 KiB 32768 KiB KiB KiB 99% 99% 9472 4096 3575 176 176.

  true true etc 28672 KiB 28672 KiB 284 KiB 320 KiB 99% 99% 4096 1024 516/etc

  Choose true true 0 KiB KiB 0 KiB KiB 0 100% 0% 8 1024 8192 32768 / opt

  var true true 5120 KiB 49152 484 516 99% 90% 8192 384 379 KiB KiB KiB / var

  tmp false false 2048 KiB 262144 KiB 20 KiB 360 KiB 99% 99% 8 256 8192/tmp

  false false hostdstats KiB 310272 KiB 3076 KiB 3076 KiB 99 0% 0% 8192 32 5/var/lib/vmware/hostd/stats

  
  

  We believe that our cause is due to have 0 free blocks of PTR:

  [root@clueless:/vmfs/volumes/55a00d31-3dc0f02c-9803-025056000040] vmkfstools Pei - v 10/vmfs/volumes/freenas-six-ds.

  System file VMFS-5, 61 extending on 1 partition.

  File system label (if applicable): freenas-six-ds

  Mode: public TTY only

  Capacity 21989964120064 (blocks of files 20971264 * 1048576), 16008529051648 (15266923 blocks) prevail, max supported size of the 69201586814976 file

  Volume creation time: Fri Jul 10 18:21:37 2015

  Files (max / free): 130000/119680

  Blocks of PTR (max / free): 64512/0

  Void / blocks (max / free): 32000/28323

  The secondary blocks of Ptr (max / free): 256/256

  Drop blocks (approve/used/approve %): 0/5704341/0

  Blocks of PTR (approve/used/approve %): 64512/0/0

  Void / blocks (approve/used/approve %): 3677/0/0

  Size of volume metadata: 911048704

  UUID: 55a00d31-3dc0f02c-9803-025056000040

  Logical unit: 55a00d30-985bb532-BOI.30-025056000040

  Partitions split (on 'lvm'):

  NAA.6589cfc0000006f3a584e7c8e67a8ddd:1

  Instant native is Capable: YES

  OBJLIB-LIB: ObjLib cleaned.

  WORKER: asyncOps = 0 maxActiveOps = 0 maxPending = 0 maxCompleted = 0

  When we turn off a virtual machine, it will release 1 block of PTR and we would be able to on another VM / create the 20 GB file using "dd". Once we reached 0 free blocks of PTR, we are unable to create new files.

  Can anyone give any suggestions on how we may be able to clear the blocks PTR? We have already tried to restart all services of management on all ESXi hosts connected.

  FreeNAS is not running on a virtual machine.

  We solved the problem by finding a lot PTR blocks have been used by many of our models of virtual machine. Remove the disk models solved the problem.

• Photoshop CS3 freezes when opening/creating new files

  My system: Mac OSX 10.5.8, 2.1 GHZ Intel Core 2 Duo, 1 GB 667 MHz DDR2 SDRAM

  Whenever I try to open the files or create new files, the program crashes / freezes. I have Google'd and found similar problems, yet I have not yet capitalized on the realization of a complete restoration. I recently installed a new driver of LEXMARK printer and I found that this could be my problem. I started to remove printers drivers and preferences of adobe to solve half of my problem. CS3 is now blocking half the time when you create a new document and crashes everytime I try to open a document. Sometimes when I'm really able to start a new document, I can open documents, which is rather strange. I must be missing something to delete of what is the driver installed, or there must be something else I'm missing.

  I uninstalled and reinstalled, but that did nothing. I created a new user account and tried to work the program in there, but it still crashes. Illustrator and InDesign work very well. I need immediate help to continue the work for the clients, please help as soon as possible. Thank you.

  Since us don't know not what the Lexmark driver leads to freezing, we do not know if reinstalling it reintroduced the problem or not.

  You should probably talk to Lexmark on the printer driver and the problems it poses.