Create project ADF service

Similar Questions

• Create the web service for foreign service composite of soa

  Hello

  only a few things to know.

  Worth better tick: copy wsdl and its dependend in the project artifacts?

  Which option to choose in Participation of the Transaction?

  Tryng to create a Web service to call a service proxy on OSB.

  Thank you.

  Fairlie

  Fairlie,

  Here you can find details on the transaction of participation parameter values - http://docs.oracle.com/cd/E25054_01/dev.1111/e10224/sca_bindingcomps.htm.

  This setting basically said if the appeal service should participate in the transactions of the process (if there is). If you want to keep the transactionality between the process and the OSB service, you'd better direct soa user liaison who takes in charge transactions. If you the OSB is transactionless, you can leave it blank.

  With respect to the WSDL, I would avoid the copy, but you should interest you when you deploy your process between different environment, for example, test, and production. In this case, you provide the configuration level to replace the URL of the WSDL for production test.

  See you soon,.

  Anatoli

• Project Web Service Proxy shaded in App with all Technologies

  I created a new application "without model [all techniques]" in Jdev 10.1.3.5.0.4306. I want to create a web service proxy, but there are many choices in gray, including the web service proxy. The only selection available under the Business-> Web Services layer is the connection of the UDDI registry. Any ideas on what I should do?
  
  I just downloaded JDev 10.1.3.5 on Oracle and I get the same question.
  
  Thank you
  
  Published by: 878316 on April 2, 2012 18:03

  Hello

  On your project properties (double-click on the name of the project) going to scope of the technology, if you are 11.1.1.6.0 or features if you are 11.1.2.x, then select web services, click ok and now when you go again that all your Web services options must be activate.

  -Juan C.

• How can I create a new service in windows 7

  Vista has a command line editor called "sc.exe" that could be used to create new system services.  Is there an equivalent tool for Windows 7, or perhaps a graphical tool for the creation of a new service for Windows 7?  Any help is appreciated.

  Hello

  I suggest you to consult the article below and check if it helps.

  How to create a trigger to start Windows service in Windows 7

  http://support.Microsoft.com/kb/975425

• Error when creating a Web Service reference. ORA-29273: HTTP request failed ORA-12535: TNS:operation expired

  I have a need to call a web service from an APEX application, so I thought I'd try to experience everything first call a web service that is accessible to the public from W3Schools.  The URL of the WSDL that I use is:

  http://www.w3schools.com/webservices/TempConvert.asmx?WSDL

  The 1st thing I try in APEX is to create a Web Service based on the above URL reference.  Problem is that I get the following error:

  ORA-29273: HTTP request failed ORA-12535: TNS:operation expired

  Any ideas?

  I even tried with some other URL WSDL and always the same exact error.

  Thanks in advance.

  Hello

  Maybe your database server have firewall that blocks to internet connection?

  Kind regards
  Jari

• When I have a constarint of deferable in the Oracle database, while creating the ADF BC, all the columns in this table is marked as primary key. any help on how to fix this?

  DROP TABLE TWO.

  DROP TABLE ONE;

  CREATE TABLE 'A

  (

  ACTIVATE THE 'ID' NUMBER NOT NULL,

  ACTIVATE THE "SERIAL" VARCHAR2 (10 BYTE) NOT NULL,

  ACTIVATE THE "FIRST NAME" VARCHAR2 (30 BYTE) NOT NULL,

  ENABLE 'PK_ONE' CONSTRAINT PRIMARY KEY ('ID', "SERIAL")

  )

  TABLESPACE 'USERS ';

  CREATE TABLE "TWO"

  (

  ACTIVATE THE 'ID' NUMBER NOT NULL,

  ACTIVATE THE "SERIAL" VARCHAR2 (5 BYTE) NOT NULL,

  ACTIVATE THE "DEGREE_CODE" VARCHAR2 (10 BYTE) NOT NULL,

  'TEST_NAME' VARCHAR2 (20 BYTE),

  ACTIVATE THE KEY PRIMARY CONSTRAINT 'PK_TWO' ('ID', 'SERIAL'),

  "FK_TWO' FOREIGN KEY ('ID', 'DEGREE_CODE') CONSTRAINT REFERS TO 'ONE' ('ID', 'SERIAL') MAYBE DEFERRED ENABLE

  )

  TABLESPACE 'USERS ';

  If we use the above sql scripts to create the tables and create the ADF BC using the above 2 tables, all 4 columns in table 2 are reported as the primary key.

  User, tell us your version of Jdev, please!

  You should file an SR with support.oracle.com for this.

  As a work around you can change the area of occurrence, and remove the check mark key pirmary on the unwanted columns. After that, it should work.

  Timo

• Flash CS6 started hanging when opening or creating projects - help!

  Hello

  I have not used the Flash CS6 (on Win 7 x 64 Pro) for a few months, and now, when you open or create projects, Flash crashes at about 10% CPU and will not continue loading.

  I created a dump file of the Mini using Process Explorer, which can be downloaded here (9 MB) Dropbox - Flash2.dmp

  Please can anyone help diagnose it, so I can get it working again? I have plans on hold (don't we all).

  Thanks for your help

  Richard

  Thank you. None of these circumstances applied to me, but I found the problem by using a few process and Thread analysis tools. There was a problem with my Wacom drivers and for some reason, and to delete and reinstall these has solved the problem.

• Combination of account for tasks in a newly created project template

  Hello friends,

  I recently created a new model of project based on a new Type of project in respect of the operating unit. Standard tasks are also added in the model.

  A new project is created by using the template said above and additional tasks above are also seen in the project.

  However, while preparing a PR in iProcurement if we choose one of the above tasks, it gives an error message - debit an account is invalid. Program error: an error occurred while looking up for a combination of segment flexfield.

  But other projects, created from a different model in the same unit of operation is not to give such a mistake.

  Can you if it doesn't matter who you please let me know if we need to define a combination of account of a task under a newly created project template.

  Concerning

  Hawker

  Hi Hawker,

  Are you using the same accounting Auto for the which was used for all other projects/Templates?

  Try and check Auto accounting Segment by Segment.

  Also check of Cross Validation rules.

  concerning

  Christopher K

• Creating the proxy service

  When I create the proxy service and choose to be created from the WSDL, I have two options for selection of the port and binding, could explain the difference in choosing between the port or binding?

  Thank you!

  This might help... Configuration of the Proxy Services and Business Services

• Error created another Console service, unable to connect to the host by vSphere vCenter

  After creating an another Service Console unable to connect to the host by vSphere vCenter. How can I remove the now Service Console or make the old one further work well?

  Thank you.

  George

  This KB will show you the steps to re-create the Service Console, but you'll need to console or ILO access to the ESX host.

  http://KB.VMware.com/kb/1000266

  If you have found this device or any other useful post please consider the use of buttons useful/correct to award points

  Twitter: http://twitter.com/mittim12

• Can I create a second service console in ESX 2.5.5?

  Can I create a second service console in ESX 2.5.5?

  Yes, I did in ESX 3. +, but I can not find/check it's ok in ESX 2.5.

  Procedures, orders or comments appreciated.

  ALL POINTS WILL BE AWARDED.

  No, you can not - the service in ESX 2.x actuallys console loads before the vmkernel and has control over its own NETWORK card and the physical memory - in esx 3.x (vSphere) the VMkernel charge first and provides these resources to the service console allowing you to create several service console ports -

  If you find this or any other answer useful please consider awarding points marking the answer correct or useful

• Create the heterogeneous Services initialization file

  Hello, I am new to oracle as I am a student. I installed Oracle Database 11 g Release 2 Enterprise Edition.
  
  I want to use a Microsoft Excel file in a source file. In the Help Center it says I have to create the heterogeneous Services initialization file in a specific directory by using these commands: HS_FDS_CONNECT_INFO = odbc_excel
  HS_AUTOREGISTER = TRUE
  HS_DB_NAME = dg4odbc
  
  My question is where should I run these commands?
  
  If I have to do in SQL Plus, how for the specific path? When sqlplus open just writing SQL > and I don't know how I can go down the path that I want to so I can run the commands.
  
  I can go through the command prompt, but of course, it does not recognize these commands.
  
  Any answer would be instructive. Thank you.

  http://docs.Oracle.com/CD/E11882_01/OWB.112/e10582/loading_ms_data.htm

  You don't need to run the Sql command * more

  HS_FDS_CONNECT_INFO = odbc_excel
  HS_AUTOREGISTER = TRUE
  HS_DB_NAME = dg4odbc

  You must create the initexcelsid.ora file in the OWB_HOME\hs\admin directory with the list above

• How to create a Web services to an external service and deploy to weblogic

  Hello
  
  I am trying to create a Web service for the wsdl
  http://ABR.business.gov.au/abrxmlsearch/ABRXMLSearch.asmx?WSDL
  who will help me to validate the number of the NBA.
  
  And I would like to create a war file and deploy it to a weblogic server,
  But the server is running behind the firewall,
  I could run the webservice of jdeveloper, but when deploy us in weblogic server
  the Web service does not work,
  
  We need to give the parameter in the Web service itself or the proxy details must exist in the weblogic proxy server?
  
  Thank you.
  
  With respect,
  Kali.
  OSSI.

  Kali,

  IMO, it would be preferable to apply the proxy settings on a global scale.

  I can't see a specific proxy settings page on my weblogic instance. Perhaps, you must add the properties of the JAVA virtual machine directly in the weblogic startup script.

  Edit: For a server JVM Arguments can be configured in the WLS console-> choose the server and go to Configuration-> start server.

  Published by: BijeshKrishnadas on October 18, 2010 21:01

• Create a Proxy Service based on WSDL.

  Hello
  
  I want to create a Proxy Service based on a WSDL with a getBalinq(XML INPUT) operation.
  
  This method should take input in xml format.
  
  How do I get there?
  
  
  <? XML version = "1.0" encoding = "UTF - 8"? >
  < name of definitions = "ProxyWsdlDefinitions."
  targetNamespace = "http://www.alsb.com/."
  xmlns = "http://schemas.xmlsoap.org/wsdl/".
  xmlns: XS = "http://www.w3.org/2001/XMLSchema".
  xmlns:ALSB = "http://www.alsb.com/".
  xmlns:SOAP = "http://schemas.xmlsoap.org/wsdl/soap/" >
  < types >
  < xs: Schema attributeFormDefault = "unqualified".
  elementFormDefault = "qualified" targetNamespace = "http://www.alsb.com/."
  xmlns:FCRequestXsd = "http://www.alsb.com/FCRequestXsd/".
  xmlns:FCResponseXsd = "http://www.alsb.com/FCResponseXsd/" >
  
  < xs: import namespace = "http://www.alsb.com/FCRequestXsd/".
  schemaLocation="./FCRequestXsd.xsd" / >
  < xs: import
  namespace = "http://www.alsb.com/FCResponseXsd/".
  schemaLocation="./FCResponseXsd.xsd" / >
  
  
  <! - use types defined in the schema that we imported just - >
  
  * < xs: element name = "FCRequest" type = "FCRequestXsd:fc" / >. *
  
  < / xs: Schema >
  < / types >
  < name of message = "getBalinq" >
  * < part name = "fcrequest" element = "alsb:FCRequest" / >. *
  < / message >
  
  I am currently creating an xsd and evoking the xsd as an input parameter.
  
  Also, when I run the proxy service I get the input query such as:
  < alsb:FCRequest xmlns:fcr = "http://www.alsb.com/FCRequestXsd/" xmlns:alsb = "http://www.alsb.com/" >
  < fcr:header >
  < fcr:txnidentifier > 3 < / fcr:txnidentifier >
  < / fcr:header >
  < fcr:req >
  <!-zero or more repetitions: - >
  < fcr:creditCardDetails >
  string of < fcr:Name > < / fcr:Name >
  < fcr:CardNo > 3 < / fcr:CardNo >
  < / fcr:creditCardDetails >
  < / fcr:req >
  < / alsb:FCRequest >
  
  I want to make:
  
  < fc >
  < header >
  < txnidentifier > < / txnidentifier >
  < / header >
  < req >
  < creditCardDetails >
  < name > < / name >
  < Caron > < / Caron >
  < / creditCardDetails >
  < / req >
  < /fc >
  
  Thank you.

  It should be like -

  
  
  elementFormDefault = "qualified" attributeFormDefault = "unqualified" >
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  

  Kind regards
  Anuj

• Cannot create the web service stored procedure.

  I can create more web services is by right clicking on the package of the stored procedure in the db connection. This good worked before and I cannot explain why I can't see this option. Grateteful for tips on why it has stopped working.

  '2009' is what Oracle said.

  John