"Quicktime 7.6.4 is vulnerable" keeps popping up. For upgrade seems to be free, but the fine print says it eliminates the old, & I have to pay to be able to use the new!

Similar Questions

• Manager Microsoft Access in the auditing keeps popping up for a password when I try to access any program - how to turn off this feature - where is it located?

  Manager Microsoft Access in the auditing keeps popping up for a password when I try to access any program - how to turn off this feature - where is it located?

  Hi Peggy Gore,.

  Welcome to Windows Vista answers Forums!

  Access Manager is a tool to control the types of content that your computer can access on the Internet. After Content Advisor activated, we can consider only rated content that meets or exceeds your criteria. You can adjust the settings according to your preferences.

  If you have set a password and you have forgotten your password, you may need to contact Microsoft Customer service to reset the password.

  For more information, please see the following links to Access Manager:

  Internet Explorer Content Advisor: Frequently asked questions.

  http://Windows.Microsoft.com/en-us/Windows-Vista/Internet-Explorer-Content-Advisor-frequently-asked-questions

  Using Content Advisor to block inappropriate web content.

  http://Windows.Microsoft.com/en-us/Windows-Vista/using-Content-Advisor-to-help-block-inappropriate-Web-content

  Hope this information is useful.

  Jeremy K

  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Hello, please help me. I use a power keyboard for my laptop. I see in the new keyboard is equipped with a num lock key is turned on. I can't use on it please help me disable it. I do not use a NumLock on. Thank you

  Hello, please help me. I use a power keyboard for my laptop. I see in the new keyboard is equipped with a num lock key is turned on. I can't use on it please help me disable it. I do not use a NumLock on. Thank you

  You say that when you press the NUM LOCK key, the Numlock State does not change (if enabled to disabled and vice versa)?  Have you tried to unplug the keyboard and by ensuring that the keyboard of the laptop does not have enabled Numlock?  If so, turn it off on the laptop keyboard and reinsert the another keyboard and see if the problem is resolved.

  If you do not need the Numlock key, it can be disabled at startup with the following procedure:http://www.technipages.com/enabledisable-numlock-at-login-or-startup.html. Once this is done, I don't think he's going to turn on or off and that they the keyboard will start in the off position.  You will not be able to use the key yourself or another, but maybe the problem she is on (which is worse than it to be impossible to be turned on) will be resolved and I hope it will be enough for you.

  If the key does not work and you want to be able to use it, the keyboard may be defective.  Try the keyboard on another computer and see if you have the same problem.  If so, the keyboard is defective and must be replaced.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• I'm trying to uninstall Verizon's VZ Access Manager. I get "invalid UNINSTALL Uninstall Wise. LOG file. How can I get this off for Verizon can help me to get the new drivers installed?

  I'm trying to uninstall Verizon's VZ Access Manager.  I get "invalid UNINSTALL Uninstall Wise. LOG file.  How can I get this off for Verizon can help me to get the new drivers installed?

  Hello retabox, welcome.

  It would seem that the installer is corrupted. I recommend trying to use the Windows Installer Cleanup utility to force - to remove the application. Try this:
  1. go to: http://support.microsoft.com/kb/290301
  2. click on the download link in the middle of the page
  3. save the file to your desktop or just click Run the installation of the application
  4. once the application is installed, open the utility. The utility must be located in the menu START under (START > programs > Windows Installer...)
  5. in the utility, find the application you want to uninstall, and then click the button 'delete' below
  6. once removed, restart the computer and see if you can reinstall the application
  Let us know if it works,
  Thank you!

  Ryan Thieman
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• I have an OEM of Windows Vista version on a dying computer. Can I buy the upgrade for Windows 8 and install it on the new PC, I'm building?

  I have an OEM of Windows Vista version on a dying computer. Can I buy the upgrade for Windows 8 and install it on the new PC, I'm building? The upgrade, is published at the same time as I'm rebuilding my PC. I'm just looking to replace my OS. I need Vista.

  Hello

  OEM license is tied to the first machine that is installed on the OEM license dies when this machine dies.

  An OEM license is not transferable.

  And you need a legal edition of Windows, enabled for upgrade.

  There is no use, you buy a license upgrade of Windows 8 by itself as you have to upgrade anything of in the new computer, you build...

  You can buy a license of Windows 8 when it comes out later this year.

  See you soon.

• I am updating Lightroom CC and it says it downloaded, but the new version is not available if I disconnect or stop - it is not updated to Lightroom 5

  I am updating Lightroom CC and it says it downloaded, but the new version is not available if I disconnect or stop - it is not updated to Lightroom 5

  If you subscribe to creative cloud, you must first install the Adobe Creative Cloud application:CC help | Creative cloud desktop.

  Do not forget to connect to Adobe using the same id (e-mail) adobe, you signed up with.

  If you are unable to install an application, verify that your system meets the minimum requirements. Applications will not appear if the system cannot stand them.  System requirements | Cloud Creative

  Since Lightroom 2015 CC is a new product, it will not show as an update in the desktop Adobe Creative Cloud application. Instead, press the button install next to Lightroom in the creative Application of cloud Manager. If you do not see 'install' by Lightroom in the application manager, please try to connect at the back and return to: connect and disconnect from the creative cloud desktop application

  If you try to upgrade 5 to 6 Lightroom Lightroom (no), then see this link: products .  Scroll to lightroom and click 'buy '. Click on the text selectable by "I want: 'and select 'upgrade'."

  Guinot

• A protective case for an iPhone 5 c will fit the new iPhone SE?

  A protective case for an iPhone 5 c will fit the new iPhone SE?  In the products section, there are cases that say they will fit the iPhone 5, 5 s and SE.  They would hold a 5 c as well?

  No - the 5 c is slightly different. The volume buttons on the 5 c are long and thin, but they are circles on the 5/5 s / SE.

• I have House part for my iPhone and apple TV, but the iPhone libraries are not listed under computers on Apple TV.  I don't see libraries for my Mac.  I use the same ID across the three devices apple

  I have House part for my iPhone and apple TV, but the iPhone libraries are not listed under computers on Apple TV.  I don't see libraries for my Mac.  I use the same identifier apple through the three devices. I have an iPhone 6 more working 9.0. The devices are all on the same home network running.

  You can't share a library that is located on an iPhone, iPod or iPad with other devices. You can only share a library that is located on a Mac or a PC with other devices. On other devices, iPhone, iPod and iPad for example, you then activate home sharing to connect to the shared library.

• I install the new cc2014 update, but for some reason any in my computer displays double former app and the new, but the new dose did not setup that I have in my old version! What will happen?

  I install the new cc2014 update, but for some reason any in my computer displays double former app and the new, but the new dose did not setup that I have in my old version! What will happen?

  Thanks, I have solved this problem, simply delete the old and manually I have brand new!

• Go off & on several times before the monitor turns on. Comp seems to start OK but the problem is with the screen.

  Original title: XP start help please...

  ... are to be turned off & on several times before monitor lights. Comp seems to start OK but the problem is with the screen. Do I have to make a boot disk & if so - HOW?

  Hello

  ·         What is the brand and model of the computer?

  ·         You get the error message?

  ·         Did you check the connection of the cable to the monitor?

  ·         Have you tried to update to the latest graphics card and motherboard chipset drivers?

  First, try to connect your monitor to a well known PC, maybe the old laptop that you use now. If the monitor works, the problem is with the video card in your PC. If the monitor does not light, the monitor. It is usually cheaper to buy a new monitor that in order to be an old repaired, unless the monitor is still under warranty.

  Try connecting a monitor well known to your PC. If the monitor works, your old monitor is fried and needs to be replaced.

  If your monitor works when connected to another PC, the problem could be your video card. First, and then you turn on your PC, the power and cooling case fans run they. If they do not, it could be the power supply.

  Then, open the computer case. Before you do anything inside, unplug the power supply.

  IMPORTANT! Touch any metal part of the computer case to connect to the PC. A single static spark can destroy computer circuits.

  If the video card is the type of card that plugs into a slot on the motherboard, remove the screws or attached at the top of the card, remove the card, to manipulate the card by the edges to avoid disturbing the circuits on the card, carefully and re - install the card. Sometimes simply reinstalling the card corrects the problem.

  If this does not work, replace the video card with a card of similar type. Perhaps now is the right time for an update of video card.

  If the video card is integrated into the motherboard, you can install a new card in one of the PCI slots on the motherboard. When the PC starts for the first time, go into the bios and disable the onboard video.

  Resources for troubleshooting problems in Windows XP

  http://support.Microsoft.com/kb/307960

• get pop ups for upgrades to Windows 10

  Original title: Windows 7

  I keep getting pop ups for upgrades to Windows 10 and my only choices are "Annex to the later" or "Start update now".

  I don't want Windows 10 now, not later. I have Windows 7 and want to keep it this way.

  GWX - ultimate Outsider Control Panel

  Would remove the popup Windows 10 completely.

  Hope that helps.

• PC can see and access the laptop without asking for a user name and password but the laptop cannot access the PC because it asks me a username and password that I don't know.

  Vista - Windows 7 network connection. username and password is unknown.

  Hello

  I just got a laptop with windows 7 on it and I want to connect to my other PC for it, they are on the same network through a router. the PC can see and access the laptop without asking for a user name and password but the laptop cannot access the PC because it asks me a username and password that I don't know.

  If someone could answer this question, it would be great.

  Hello
  Maybe this can help.

  Win7 when configured on the peer-to-peer network has three types of configurations of sharing.

  Group residential network = only works between Win 7 computers. This type of configuration, it is very easy to entry level users to start sharing network.

  Working network = fundamentally similar to previous methods of sharing that allow you to control what, how and to whom the records would be shared with.
  
  Public share = network Public (as Internet Café) in order to reduce security risks.

  For the best newspaper of the results of each computer screen system and together all computers on a network of the same name, while each computer has its own unique name.

  http://www.ezlan.NET/Win7/net_name.jpg

  Make sure that the software firewall on each computer allows free local traffic. If you use 3rd party Firewall on, Vista/XP Firewall Native should be disabled, and the active firewall has adjusted to your network numbers IP on what is sometimes called the Zone of confidence (see part 3 firewall instructions

  General example, http://www.ezlan.net/faq.html#trusted
  Please note that some 3rd party software firewall continue to block the same aspects it traffic Local, they are turned Off (disabled). If possible, configure the firewall correctly or completely uninstall to allow a clean flow of local network traffic. If the 3rd party software is uninstalled, or disables, make sure Windows native firewall is active .

  ------------------------------

  If your network consists only of Win 7 and you want a simple network, use it.

  http://Windows.Microsoft.com/en-us/Windows7/help/videos/sharing-files-with-HomeGroup

  After you have configured the homegroup, scroll to the bottom for the Permission/security section.

  -----------------------------

  Win 7 networking with other version of Windows as a work network.

  In the center of the network, by clicking on the type of network opens the window to the right.

  Choose your network type. Note the check box at the bottom and check/uncheck depending on your needs.

  http://www.ezlan.NET/Win7/net_type.jpg

  Win 7 - http://windows.microsoft.com/en-us/windows7/Networking-home-computers-running-different-versions-of-Windows

  Win 7 network sharing folder specific work - http://www.onecomputerguy.com/windows7/windows7_sharing.htm

  Vista file and printer sharing - http://technet.microsoft.com/en-us/library/bb727037.aspx

  Windows XP file sharing - http://support.microsoft.com/default.aspx?scid=kb;en-us;304040
  Sharing printer XP - http://www.microsoft.com/windowsxp/using/networking/expert/honeycutt_july2.mspx

  Setting Windows native firewall for sharing XP - http://support.microsoft.com/kb/875357
  Windows XP Patch for sharing with Vista (no need for XP - SP3) - http://support.microsoft.com/kb/922120

  When you have finished the configuration of the system, it is recommended to restart everything the router and all computers involved.

  -------------

  If you have authorization and security problems, check the following settings.

  Point to a folder that wants to share do right click and choose Properties.

  In the properties

  Click on the Security tab shown in the bellows of the photo on the right) and verify that users and their permissions (see photo below Centre and left) are configured correctly. Then do the same for the authorization tab.

  This screen shot is to Win 7, Vista menus are similar.

  http://www.ezlan.NET/Win7/permission-security.jpg

  The Security Panel and the authorization Panel, you need to highlight each user/group and consider that the authorization controls are verified correctly.

  When everything is OK, restart the network (router and computer).

  * Note . The groups and users listed in the screen-shoot are just an example. Your list will focus on how your system is configured.

  * Note . There must be specific users. All means all users who already have an account now as users. This does not mean everyone who feel they would like to connect.

  ---------------------

  *** Note. Some of the processes described above are made sake not for Windows, but to compensate for different routers and how their firmware works and stores information about computers that are networked.

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• where to get a copy og pixela media broeser for not updating jvc hd camcorder, but the original copy

  can someone tell me where to get a copy og pixela media broeser for not updating jvc hd camcorder, but the original copy

  Check here:

  http://www.PIXELA.co.jp/OEM/JVC/MediaBrowser/e/

  Tom Ferguson

• I used to have Roboform on my toolbar for Firefox for fill-ins easy & since I downloaded the new version, it is gone. Can I put? How?

  I have Roboform on my computer. It used to be on the toolbar for Firefox, but it has disappeared from version 5. How can I get that back?

  http://www.RoboForm.com/support/news

  Version 7.3.2

  • Firefox 5: Add support for Firefox 5.

• How to fix red eye on the windows live photo gallery? I like the ease of use on the windows photo gallery, but the new version is leaving me frustrated

  There was a "fix" Windows Photo Gallery button which you given then repair of redeye, color enhancements and cropping options.

  the new version on this new computer is Windows LIVE photo gallery and it is not very easy to use and has none of the features that I like that are listed above.

  where can I find these options on the new version.

  If this is not possible

  How to use the old version without getting rid of the new version of the photo gallery?

  I look forward to continue to transfer my photos from this computer to my old machine to my editing.

  You might not be able to use these features, because you haven't gotten to complete editing the page again,

  Click on the photo you want to edit in any way,

  And press the Enter key,

  This will open the photo selected in the edition full edit where the toolbar is available, also listed is close file on the right end of it, by clicking on file close will take you back where you started.

  Crop a photo is the only edition that you have to click twice

  Time to start the process and once after finishing harvest so it will save the changes.

  All other changes are to be saved after you click Close file, red eyes may also have one separate record other than close file.