Create, save data backup

Similar Questions

• Time Machine every few weeks stopped backup because it must create a new backup. 9 to on MY Cloud EX2 takes 4 full days. Crazy to keep losing all backup dates.

  Time Machine every few weeks stopped backup because it must create a new backup. 9 to on MY Cloud EX2 takes 4 full days.

  Crazy to keep losing all backup dates

  Message reads

  "Time Machine has conducted an audit of your backups on"WDMyCloudEX2". To improve the reliability,

  Time Machine must create a new backup for you"

  Click Start a new backup to create a new backup. This will remove your existing backup history. This may take several hours.

  Click Back Up later to be reminded tomorrow. Time Machine won't perform backups during this period.

  Is - this common, no way to stop it?

  Just take a brief look at WD for 'My Cloud EX2' site, they list El Capitan as an operating system supported. Mavericks is the latest OS listed. Probably you need to contact Western Digital support.

• Time Machine must create a new backup

  I received the following message: Time Machine has conducted an audit of your backups on "Personal Cloud."  To improve reliability, Time Machine must create a new backup for you.  Does this mean that to maintain backups, my previous backups will be gone?   I'm basically ignoring tech.  Thank you!

  Does this mean that to maintain backups, my previous backups will be gone?

  Yes.

  A device third-party network attached storage (NAS) or a router is unsuitable for use with Time Machine, especially if it's your only backup. I know that's not what you want to hear. I know that Time Machine accepts the device as a backup destination. I know that the manufacturer says the device will work with Time Machine, and I also know that it usually seems to work. Except when you are trying to restore and find that you can't.

  Apple has published a specification for network devices that works with Time Machine. No third party provider, AFAIK, does meet this specification. They all use the application of "Netatalk" incomplete, obsolete Apple Filing Protocol.

  Apple does not endorse any device third-party network for use with Time Machine. See this support article.

  Network backup, use as destination an Apple Time Capsule or an external storage device connected to another Mac or a 802.11ac AirPort base station. Only 802.11ac base stations support time Machine, not older model.

  Otherwise, use Time Machine at all. There are other ways to save, although none of them are nowhere near as effective or as well integrated with OS X. I don't have a specific recommendation.

  If you are determined to continue to use the device with Time Machine, your only remedy for any resulting problem is the manufacturer (who will blame Apple, neither you nor anyone else but herself.)

• can I remove my back upwards and to create a new backup? without losing anything?

  can I remove my back upwards and to create a new backup? without losing anything?

  or if not, how can I save my phone

  N ° you will lose your old backup. Backup using iTunes and backup on the computer. You will not lose the old backup if you archive it. Open iTunes preferences, click on the devices icon in the toolbar. Select the last backup, CTRL - or right-click, and then select Archive from the context menu.

• All my backups recently disappeared.  Parameters: summary page, there is no box to decide where to save a backup.

  All my backups recently disappeared from preferences: devices...: backup device:. (2 iPhones & iPads 2)

  On the summary page, there is no box to decide where to save a backup.  Information that used to be below the summary box and especially the bar graph showing the use of data on the device is missing.  The two checkboxes on the page are check for iPhone update and restore.

  I also lost the ability to synchronize these devices more than an iPod Classic, the sync button is grayed.

  OS X 10.11.2, iTunes 12.3.25

  I am positive, it is a new show, I gave my wife an iPad 2 Air for Christmas and the safeguarding of its iPad 2 to copy all of its applications and data to the new!

  After hours with Apple Support, I was told:

  "I've heard of our engineers and I have some steps for you to try.

  First of all, please reboot your Mac. In the newspapers, it seems that the Mac has not been restarted for a few days.

  Once you have restarted the Mac, we would like you to remove some pieces of software. Intego, the VMWare and Rubbernet virtualization software. Once you have all of these deleted programs, please restart your Mac again and try to connect your devices on iTunes and see how iTunes responds. »

  That has NOT fixed the problem.  I formatted my laptop, reinstalled El Capitan and migrated from my Mac Pro.  Now iTunes works OK.  Rubbernet and VMWare Fusion have been copied, but Intego has not been installed on my desktop.

  The problem I have now is that my laptop is called Craig Desktop (2) laptop instead of Craig!  Any ideas?

• How can I save data in text format

  How can I save data in text format in labwindows cvi

  Hello

  If your data is in a table, the easiest is to use the ArrayToFile function.

  Automatically, it creates a file and puts your data in it depending on the size you provide.

  If you have individual samples you need to write from time to time, you can either collect them in a table and then use ArrayToFile or open a file with fopen and write them as they are acquired with fwrite.

  Hope this helps,

• save data in CT so touch

  Hello

  To save my data in TDMS file whenever I pressed the save data"" button. I created the attached VI.

  My VI worked fine, but when I open the file I found my data, further columns to zero, in the case for lack of my Condition structure, I selected default value if it is not wired.

  I would appreciate your help

  Thanks in advance

  My best regards

  Nadia

  (1) you must connect the wire of reference and error of PDM through the case of FALSE

  (2) you have 1 too many items in your list of channels table.  Remove the 0.

• Data backup before updating the ICS!

  I know that the CSI to Live with Walkman is just around the corner (in India) so I thought completely on the way to save not just the apks but all app data data app for example. -I don't want to lose my progress in some games.

  So please help me to save my app data.

  as it was suggested above you cannot save data on applications, unless root you your phone and use titanium backup

• How to save data in a txt file.

  Does anyone know why the txt file is empty with no content?

  FILE * f = fopen ("/ shared/documents/save.dat", "w");
  {if(f==null)}
  fprintf (stderr, "Failed to create output. txt\n");
  _exit(2) (1);
  }
  fprintf (f, "Hello World");

  File is created, but the file txt empt without 'Hello World '.

  Ha ha solved.

  fclose (f);

• Persistent data backup

  Hello

  I'm developing an application in which I saved in the persistent store persistent collections.  I'm developing a backup strategy for the application.  I would like for my users to save data to their desktops and restore it if necessary.

  As far as I could research, I found an option only: to register collections to sync with the Desktop Manager.

  What is the best way to achieve this? If so, are there examples? One that I found in the BlackBerry Application Developer Guide Volume 2: advanced topics shows a lot of code, but it explains the process very briefly and because my request is configured very differently (each collection is in a separate class) as their example, I couldn't really use the code. They have mentioned that it can be done if the collections can be in different classes, but there is no example of how to do it.

  In addition, there are alternative methods?

  Any help is greatly appreciated.

  Thank you

  Daniel

  I recommend having a look at the otabackuprestoredemo provided with the BlackBerry JDE.  It shows how an application can back up and restore data stored in the persistent store.

• How do I partition my drive so I can create a full backup of my computer?

  My hard drive with windows 7 appears in disk management with 3 partitions. One is the system partition labeled C: healthy (System, boot, pagefile, Active, Crash Dump, primary Partition) and the other 2 say-healthy (recovery Partition) 1.46 GB and healthy (Primary Partition) 6.36 GB. The other 2 are shown as 100% free. Can I remove these or at least the other primary partition so I can use the space? I want to create a partition where I can make a full backup of my computer so I can restore to the current state.  Any help on how to do this? I'm not at all familiar with the help of disk management. I guess I can delete the system partition, and then the 6.36 GB will be automatically added to the first primary partition, or it would show as unallocated, then I have to shrink the first primary partition and merge sort the free space of the 2 partitions to create 1 partition backup. But I have never done this so I don't know exactly what to do.

  I also have an external hard drive 2 TB USB with 1 primary partition. I would like to back up on that as well (I guess I should also create a separate partition for this.). Ideally, I would like to have my computer Setup, so when it starts up I have the ability to restore. And I guess just that this would require backup on a separate partition.

  I have two Windows 7 with the backup and restoration of facilities as well as Acronis True Image Home 2011.

  Any advice much appreciated

  Thanks, Mike

  Save your files or your partitions in a free partition on the internal drive is a waste of time. Doing so offers no protection against the most common such as woes

  • Flight
  • Water damage or fire
  • Physical damage (dropping out of the machine)
  • Hard drive crash
  • File system corruption (e.g. damaged partition table)
  • User error (for example of formatted the wrong partition)

  A decent backup plan is based on the backup media being kept well away from the PC for most of the time.

  Note also that expand them or shrink partitions is equivalent to open heart surgery. Make sure you have your important stuff saved beforehand. You should also check if the saved controls is actually readable.

• Essbase data backup script

  So I a. The MSH, with the following basic information file, where if I schedule this task, I will get a backup of data for the date file this script has been planned and in the next race, the same name of file to the backup.

  I would like to be able to get this script to save the backup based on the date it has been executed and produce a new backup file based on the date of each subsequent executions.

  Someone at - it something like that they would like to share with us?

  echo "- INITIALIZE ROUTINE -";

  echo "this script can be run every night to perform backups of data export of Essbase;

  echo "Begin recording in the backup log file ';

  spool to DataBackup_AllApps_Log.log;

  ECHO "";

  echo "- PERFORM REQUEST LOGIN -";

  echo "log on to the server by using the: userid, password and server name"; "

  login password admin on hyperionserver;

  ECHO "";

  echo '- LOG OUT ACTIVE server SESSIONS -';

  echo "commands of disconnection from the current system of execution... » ;

  ALTER system disconnect session force them all;

  ALTER database Demo.Basic unlock all objects;

  Change the system asks to kill all them.

  echo 'Objects unlock complete on server';

  ECHO "";

  echo '- EXPORT ESSBASE DATA BACKUP -';

  echo "Running export orders Database...". » ;

  export data from database demo.basic Level0 to data_file 'C:/Oracle/Administration/DataBackup/DataBackup_Demo_Basic_File.txt ';

  echo "Completed data backup export";

  ECHO "";

  echo "- TERMINATE ROUTINE -";

  spool off;

  "exit";

  Hello

  Before start using script Hari add below lines

  echo off

  @REM * SETTINGS *.

  @call D:\back\Backup.bat

  Set year = % date: ~ 10, 4%

  Set day = % date: ~ 7, 2%

  Set months = % date: ~ 4, 2%

  define a day = %% months %% % of the year

  hh = % time: ~ 0, 2%

  mm = % time: ~ 3, 2%

  the value of ss = % time: ~ 6, 2%

  the value t = % hh % mm % ss %

  essmsh %filepath%Backup.mxl % essuser % esspwd % esssvr %%%d % tm dt

  Rename 'D:\back\security.txt' 'D:\back\security%d%_%t%.txt '.

  Rename 'D:\back\alldata.txt' 'D:\back\alldata%d%_%t%.txt '.

  Backup.bat

  spool to 'D:/bck/EssbaseArchive.log ';

  Set timestamp

  connection $essuser $esspwd on $esssvr;

  poster session;

  change the system asks to kill all them.

  alter system disconnect session any force;

  export database $essApp. $essDB all data to the server data_file 'D:\back\alldata.txt ';

  security_file export of data_file 'D:\back\security.txt ';

  change the $essApp database. $essDB force archive in the folder "d:/bck/sample.arc".

  change the $essApp database. end of $essDB archives;

  spool off;

  disconnection;

  "exit";

  So that it will be not any replacement of the existing backup files, remember you will have to go for some activities of housekeeping that it could consume space.

  If _1, _2 files because although I mean more than 2 GB of data, then you may need to modify the script to rename all the files in the directory using a loop for.

  Thank you

  Amith

• ID of file of the data file created using CREATE the DATA file

  Version: 10 gr 2
  
  I lost a test data file that was created in the morning. No available backup. I have all logs archived.
  
  Question1.
  Here are the steps to recreate. Right?

  1. alter tablespace <tablespace_name> offline immediate;  --- should this be offline drop?
  2. alter database create datafile '/u03/oradata/dbtst/CLM01.dbf';
  3. recover tablespace <tablespace_name>;
  4. alter tablespace <tablespace_name> online;

  Question2.
  The newly created file will retain the ID file from the original file that was lost?

  Since you're on 10g, you have not manually create the data file. Check recovery of a Datafile without backup lost: example for more details.

  The identifier must remain the same.

• What happens to the apps that only game center used for their data backup?

  I downloaded iOS 10, but game Center has disappeared, what about all my save data for the apps that I have and who has not used a site of social media for data? I apologize that it is in the community of evil, but I couldn't understand where this issue would go

  e-invites-are-managed-by-messages http://AppleInsider.com/articles/16/06/20/Inside-iOS-10-with-Game-Center-App-Gon

  Hope this helps

• Tecra M1: Unable to create a data disc

  Hello

  I'm developing a package to deploy Toshiba Disc Creator on all our Tecra M1 and M2 computers laptops, which represents about 200 units. The package I created works fine on all Tecra M2, but the Tecra M1, users get a problem BOUNCING. When they burn a data disc, they get the following about 50% of the time error: "failed to create a data disc. The current process stops. »

  Even if they get this message, the creation of cd is always successful most of the time, but about 10% of the time, he is corrupt. There is no way to know if it actually worked or failed until you try to copy data to newly create CD. It also happens that doing an exact copy of a CD will give a similar error message.

  I tried to find information about this software on the internet, but I am at a loss at this point, because no document seems to exist and event our Toshiba Rep doesn't know what to do. If anyone has a suggestion, I'm willing to try.

  Thanks in advance.

  To me, this looks like a simple and common error during the burning process.
  I put t know what burning software you use but I recommend burn media with Nero. It of simply and heavy application performance it s my favorite
  You must also use a burning program. Don t mix different programs such as sonic for example.

  Additional test different types of media in my practical knowledge not all media (CD or DVD) is taken in charge and, sometimes, you can get errors in engraving.