Tecra M1: Unable to create a data disc

Similar Questions

• Tecra M7: Unable to create recovery CD: lack CDDVD.ini - INI file load error: RDC_info.ini

  I recently bought a Tecra M7, but the system does not include recovery media, just a recovery partition and a recovery disk creator.

  However, when I try to run the Recovery Disc Creator, he responds with "error loading INI file: C:\Program Files\Sonic\RecordNow!\RDC_info.ini.

  I opened this file in an attempt to determine the error, but the content simply refer to a file named CDDVD.ini. I looked everywhere in the hard, even mounted the recovery Partition, but could not find this file.

  Search on Google, I found that this case is regularly brought disappeared, and that without it, the recovery media cannot be created. A person said Tech Support by sending an email the file, another was sent by another user.

  In both cases, the user was immediately able to make records. In any case, there seems to be a standard file, referring to the "Add_info.ini" (Application and drivers disks) and "Rec_info.ini" (OS Recovery Disk), fairly uniform and unchanging across all systems that use this method to create discs.

  Please, could someone email me them or post it here so we can all see?
  If/when I get this file, once I determined it works I post here.

  Daniel

  Hello

  You can buy a set of recovery disc for Toshiba for all £17 and£ 18. Maybe it will help if you can't find the file.

  Thank you...

• Using Linked clones with a data disc?

  We expect on the creation of our BASE image with a 50 GB C:\ drive.  For the moment, we will not use Thinapp, so the few apps we need for our people call center will be installed on the base image. We also plan to use the profile unit of Liquidware Labs and will use linked Clones.  My question is, do I have to create a data disc (D:\) to install Apps or just expand the C:\ drive?

  If the user data (documents, computers of desktop, thems and local profiles) will store locally and needed to preserve for the future and use the redirection of the user's data and set separate drive for this.

  In the case where the user data is Vagabond (stored and shared in the Center), then do not use that feature, simply create a bigger drive C.

• Cannot create the data source in console (Linux) wls XE db (windows)

  Hi all
  I use Linux5 for 11.1.1.1.4 soa deployments, I'm unable to create the data source in WLS of XE database that runs in win7, I'm getting below error.
  did I do it properly or it is not possible? When connecting with db XE which runs on Linux, I am able to connect.
  
  
  -Error connection failed test.
  -Error IO error: the network adapter could not establish the connection
  oracle.jdbc.driver.T4CConnection.logon(T4CConnection.java:443)
  oracle.jdbc.driver.PhysicalConnection. < init > (PhysicalConnection.java:670)
  oracle.jdbc.driver.T4CConnection. < init > (T4CConnection.java:230)
  oracle.jdbc.driver.T4CDriverExtension.getConnection(T4CDriverExtension.java:34)
  oracle.jdbc.driver.OracleDriver.connect(OracleDriver.java:567)
  oracle.jdbc.pool.OracleDataSource.getPhysicalConnection(OracleDataSource.java:404)
  oracle.jdbc.xa.client.OracleXADataSource.getPooledConnection(OracleXADataSource.java:694)
  oracle.jdbc.xa.client.OracleXADataSource.getXAConnection(OracleXADataSource.java:267)
  oracle.jdbc.xa.client.OracleXADataSource.getXAConnection(OracleXADataSource.java:134)
  com.bea.console.utils.jdbc.JDBCUtils.testConnection(JDBCUtils.java:745)
  com.bea.console.actions.jdbc.datasources.createjdbcdatasource.CreateJDBCDataSource.testConnectionConfiguration(CreateJDBCDataSource.java:458)
  sun.reflect.NativeMethodAccessorImpl.invoke0 (Native Method)
  sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
  sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
  java.lang.reflect.Method.invoke(Method.java:597)
  org.apache.beehive.netui.pageflow.FlowController.invokeActionMethod(FlowController.java:870)
  org.apache.beehive.netui.pageflow.FlowController.getActionMethodForward(FlowController.java:809)
  org.apache.beehive.netui.pageflow.FlowController.internalExecute(FlowController.java:478)
  org.apache.beehive.netui.pageflow.PageFlowController.internalExecute(PageFlowController.java:306)
  org.apache.beehive.netui.pageflow.FlowController.execute(FlowController.java:336)
  ...
  
  just please give me some resolution.
  
  Concerning
  Shankar

  I noticed that this is a problem with b & w of the VM communication. box of VM workstation vm.

  Thankx
  Siva

• Unable to create a Windows 7 system repair disc

  Hi, I see a lot of posts on this topic on the internet, and sometimes, people seem to be able to find a solution by uninstalling specific software, etc., but there seems to be a generic instability. I have a new installation of windows 7 64-bit, fully updated, but am unable to create a repair disk through the normal channels (maintenance, backup & restore, or directly in the command prompt). They seem to everyone to start the same program, that is not instantly with the message "ERD of Microsoft Windows has stopped working" - a shaded box indicates the dialog to select a drive, is nothing to do with the output device, but immediately an error. I guess I can create a disc by various ways of downloading, but Microsoft is not possible to debug the issue? -It is very unacceptable to have no indication as to what went wrong. I see other people have provided extensive debugging information, but as far as I can see no expert never responded with an analysis of these data, except to the list of ordinary forms of the program to failure!

  When you select the option to create an ERD, the first window should allow you to select the destination dvd player. Are saying you that you do not get it right? Its actually under control panel > system and security > backup & restore

  Also, I guess you want to tell your restore disk of PC makers, from the hidden restore partition to create. If this is the case how do you create the recovery disk depends on the manufacturer of the PC, this isn't an option of victory

• Cannot create a new startup with my data disc

  Hi guys, here's the problem: when I try to create a new startup with my data disc, I can't boot from this drive.

  The startup progress bar takes forever and then I see a white circle with a line through it. ("Prohibited" / "Ghostbusters" sign.)

  In verbose mode, it hangs on "break pci: SDXC ' for a while, then it clears the screen and watch the Circle + line with 'still waiting on the root device' at the bottom left.

  I can't boot into single user mode. Quite simply, there is the same thing as verbose mode. Even in safe mode. So I have few options for debugging. I did a SMC reset, no change. Is there anything else I should try?

  Additional information:

  -I'm trying to start off a new SSD that I bought, currently in a USB 3.0 enclosure external. I know that all is well with the speaker because I started off of him several times in the past. I know that all is well with the reader, because I tried to do the same process with another drive and it doesn't work the same way.

  -J' cloned my current boot drive to the new drive with SuperDuper!, Carbon Copy Cloner and I also did a clean install of El Capitan using recovery mode. The new facility has worked well until I migrated my old data.

  - So there must be something in my data which are striated throughout this process. I don't know what it is maybe or how to track him down.

  Any thoughts are appreciated!

  Have you tried the PRAM reset? Restart while pressing control + command + P + R until you hear the boot chime at least twice.

• Unable to create the disc of recovery on my Equium P300-19O

  I am unable to create a recovery disk. I get an error code: 020150-20-00000000 and the F:106557xsp4.swm file missing message. When you create the disc 1. Two disk does not work either.

  I think it's important to do these recovery disks, but I have already lost 5 discs already. Is there any help that anyone can give.

  Thank you

  The hidden restore partition has been deleted or changed?

  Perhaps the hidden partition was damaged because of a loss of power or something.

  You should test the memory and the disk using Memtest: www.memtest.org and DFT: http://www.hitachigst.com/hdd/support/download.htm

• VDDK v1.2 is unable to create the disc on the other file system

  I work on one file system other than NTFS for Windows and should be able to create a virtual drive it.

  Using the new v1.2 VDDK, I try the following command:

  VMware-vdiskmanager - c - a free - 0 TS 70 GB
  .pdvfs\myserver\2\CarlData\CarlData.VMDK

  It fails with the error:

  Unable to create the disc: the file is too large for the filesystem (0xc00000015).

  With the help of the utility even 1.1 VDDK works very well.

  If I map the 'share' to a drive letter, the next command in the V1.2 works too well:

  VMware-vdiskmanager - c - a free - 0 TS 70 GB Q:\2\CarlData\CarlData.vmdk

  I know from painful experience last year that the error "the file is too big" is pretty generic, and generally means vixdisklib think that the target file system is not NTFS.  I changed my driver year last to convince vixdisklib v1.1 it was OK to create a large virtual drive here.  "I also remember that the library is the distinction between a target name starting by".
  "compared to the other with a drive letter.  "Is there something I can do to make the v1.2 to accept the"
  .pdvfs' form of file name?

  I see a sensitive case named streams, acl persistent search for support as defining NTFS for this audit. Can you confirm if you have these?

  Thank you

  Annick

• HP DL380 G6 ESXi 5.5 capable of detecting devices of storage but unable to create data warehouses

  I will say upfront I am newbie and in need of assistance.

  I have a HP DL380 G6 for which I installed iso customized for ESXi with the help of a CD-Rom, installed everything great, no errors, health status shows all green.

  I have 3 hard drives in bays, 500GB, 500GB and 1 TB.

  Sensors see the three connected but in ESXi under storage I cannot see one, could not create a data store.

  My goal is to have a hard disk for each operating system that you are separate, I don't really care about RAID that I think that maybe part of the problem.

  I have attached the photos if someone can help me here.

  Thank you!

  

  

  

  Hello

  first of all, I would like to check if the latest Proliant SPP (service pack) is installed, or at less the systems BIOS, firmware for the P410i, network cards and the HP ILO (if you have a) is up-to-date. Latest version of the firmware of the P410i is 3.30 (B) insofar as I see, you have 3.00.

  Then go into the P410i RAID configuration and check if everything is configured correctly, it. It looks like at least the 1 TB drive and probably one of the 500 GB drives are not configured in the settings of the controller. This is why there is no volume showing in VMWare.

  If you change the configuration in P410i referring to disk/RAID volumes you may need to reinstall VMWare.

  cykVM

• Screen flickers on Satellite L300 and I am unable to create a recovery disk

  Hi all

  I just bought a model L300 PSLB0C 08R08C number.
  I was unable to create a recovery disk, I was getting an error message saying it cannot create disk because it is scratched or has dirt on it, I lost 5 nine DVD.

  I am went to the store and replaced by another unit, but had the same problem (I have not tried a different brand of DVD well)

  Second issue with this device, the screen flashes once whenever it is in a shutdown state.
  Number 3, the wireless card disappears from the Device Manager, until I restart.
  Laptop made in China ;-)

  Any suggestions are much apprecaited

  Hello

  It is indeed strange that you were unable to create a recovery disk, and that the problem has resurfaced, even after permutation of the laptop with another unit of the store. However, if you have not tried a different brand of DVD so I suggest that if the laptop asks the disc is scratched or has dirt on it. I'm not sure if toshiba factory in fact blank DVDs, but if they do, it would be a starting point, as one would expect hardware toshiba would happily work with their own brand DVD media. However, if you can't find toshiba dvd then use another trust mark, for example, Imation and TDK. with my experience, I have tried many brands of DVD and have found very reliable TDK.

  regarding the second question, this may be related to the graphics card in the system, or could be due to the performance of the computer laptop itself. Check that you have the latest driver for your graphics card and all the settings on the computer are optimized / hard drives are defragmented and deleted unnecessary files. with your third question, this question could also be related to driver problems, check your regional drivers toshiba site for the latest drivers again. failing this, I would back up your data and then restore to a factory condition, then install the drivers immediately. I hope this info can help you somehow.

  Welcome to the forums and please leave helpful points or correct answer for any useful advice that has been given in response to your problems (e.g. to read the forum rules)

  concerning

• How to create a recovery disc with all vista updates?

  original title: how to create a recovery disc with all vista updates without starting from scratch, so I can replace my hard drive?

  My hard drive seems to be dying.  I would replace the drive.  I reloaded vista from scratch with all the updates, but it took forever.  I would like to make a record of recovery with all updates.  IAM on vista Home premium.  32 bit

  If you want a good backup program that backups image, I recommend Acronis True Image 2010:http://www.acronis.com/homecomputing/products/trueimage/.  It offers a free trial, so you can test and if you want it's only about $30 for the original version.  A lot of people I know this program and use it instead of Vista even in versions of Vista that offers imagery as this program does a better job.  Of course you also need a place to put the backup (which will take a lot of space), so also consider.  The best choice would be a USB external hard drive at least as large as the readers you want to back up (not only the data on them, but the entire available disk space, so you miss when you add more information about the disks).

  You cannot use IMGBURN do - it can't do anything like that.  It must be the imagery of backup software.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• copy of a dvd/data disc using vista

  I have a HP desktop computer and an operating system vista Home premium I tried unsuccessfully to copy a dvd/data disc using windows media player 11 and Windows media center... Nothing works. I thought I have to first transfer the files from the dvd to my hard drive and then burn a copy. Please give me instructions on how to do it.
  Thank you, whoever you are helping me with that.
  Freddie

  I have a HP desktop computer and an operating system vista Home premium I tried unsuccessfully to copy a dvd/data disc using windows media player 11 and Windows media center... Nothing works. I thought I have to first transfer the files from the dvd to my hard drive and then burn a copy. Please give me instructions on how to do it.
  Thank you, whoever you are helping me with that.
  Freddie

  ==================================
  Here's an easy way to create a copy of your DVD.

  The following freeware can create an ISO Image
  your DVD and then burn it to a blank dvd.

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  Download ImgBurn:
  http://www.Digital-Digest.com/software/download.php?sid=470&SSID=0&did=1

  How to create an image file of a disc with ImgBurn
  http://Forum.ImgBurn.com/index.php?showtopic=6379

  How to write an image file to a disc with ImgBurn
  http://Forum.ImgBurn.com/index.php?showtopic=61

  John Inzer - MS - MVP - Digital Media Experience - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• If I create a restore disc, will be if give me a copy of my registration, profiles, retore point, etc?

  Original title:

  Backup files

  I had a problem connecting with my profile today, get it fixed. It made me think what are important files which should I back up? If I create a restore disc, will be if give me a copy of my registration, profiles, retore point, etc? I looked online and found information about creating a backup, but lets say a windows file gets corrupted, or my user account, etc. Is there a way I can get this saved?

  My data is backed up using Mozy, so I'm not worried about the loss of data. Want just a way to easily get Windows operational return. Thank you.

  Hello

  BTW, you can use the system restore which records these parameters (and register):

  System restore
  http://Windows.Microsoft.com/en-us/Windows7/products/features/system-restore

  What is system restore?
  http://Windows.Microsoft.com/en-us/Windows7/what-is-system-restore

  System Restore: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows7/system-restore-frequently-asked-questions

  How to create a System Restore Point in Windows 7
  http://www.SevenForums.com/tutorials/697-system-restore-point-create.html

  How to do a system restore in Windows 7
  http://www.SevenForums.com/tutorials/700-system-restore.html

  ===================

  A utility to help you.

  ShadowExplorer - free - allows you to browse the shadow copies created by windows
  Vista/7 Volume Shadow Copy Service. It is specially thought for users of the Home editions,
  who have not access to the default shadow copy, but it is also useful for users of the
  other editions.
  http://www.ShadowExplorer.com/

  Rob - SpiritX

• Unable to create directory/home/oracle/app/oraInventory

  When installing OEM Cloud user oraoem control, there is always an error even if this user oraoem belongs to oinstall.

  NEWS: 19 10/15 2:46:11 PM CDT: * noncorepluginIDs plugins: [Apache Tomcat, Bay EMC CLARiiON storage EMC Celerra, EMC Symmetrix Array, Exalogic Elastic Cloud Infrastructure, IBM DB2 Database, Microsoft .net Framework, Microsoft Active Directory, Microsoft Biz Talk Server, Microsoft IIS, Microsoft SQLServer Database, Oracle Audit Vault, Oracle Audit Vault and firewall database, Oracle Big Data Appliance, Oracle Cloud Application] [, planning of peacebuilding rebilling Oracle of engineering system Healthchecks, Oracle Fusion Applications, Oracle Siebel, Oracle storage management framework, Oracle Virtual Infrastructure, Oracle, Oracle virtualization, virtual networks and Oracle Sybase ASE database, zero data loss recovery device]

  NEWS: 19 10/15 2:46:11 PM CDT: get the default inventory of default invPtrLoc location: ' / etc/oraInst.loc '

  NEWS: 19 10/15 2:46:11 PM CDT: definition of the location of the default inventory: ' / home/oracle/app/oraInventory.

  NEWS: 19 10/15 2:46:11 PM CDT: * new selected installation *.

  NEWS: 19 10/15 2:46:11 PM CDT: load the XML validation+++/home/oraoem/softw//install/em/validateXmls//noseed_validate.xml

  NEWS: 19 10/15 2:46:35 PM CDT: * updates *.

  NEWS: 19 10/15 2:46:47 PM CDT: metalink option download is seletced.

  NEWS: 19 10/15 2:46:47 PM CDT: all fields are valid

  NEWS: 19 10/15 2:46:47 PM CDT: * Oracle inventory *.

  NEWS: 19 10/15 2:46:57 PM CDT: validate the variable: INVENTORY_LOCATION

  NEWS: 19 10/15 2:46:57 PM CDT: unable to create directory/home/oracle/app/oraInventory. You may not have the appropriate permissions to create the directory or there is no space left in the volume.

  19/10/15 2:46:57 PM CDT: error: / home/oracle/app/oraInventory specify a location of the inventory with write permissions.

  NEWS: 19 10/15 2:54:38 PM CDT: validate the variable: INVENTORY_LOCATION

  NEWS: 19 10/15 2:54:38 PM CDT: unable to create directory/home/oracle/app/oraInventory. You may not have the appropriate permissions to create the directory or there is no space left in the volume.

  19/10/15 2:54:38 PM CDT: error: / home/oracle/app/oraInventory specify a location of the inventory with write permissions.

  NEWS: 19 10/15 4:09:28 PM CDT: POPUP of WARNING: do you really want to leave?

  NEWS: 19 10/15 4:09:30 PM CDT: eliminate the object box to install controls

  NEWS: 19 10/15 4:09:30 PM CDT: update to STATE_CLEAN state machine

  NEWS: 19 10/15 2:46:57 PM CDT: validate the variable: INVENTORY_LOCATION

  NEWS: 19 10/15 2:46:57 PM CDT: unable to create directory/home/oracle/app/oraInventory. You may not have the appropriate permissions to create the directory or there is no space left in the volume.

  19/10/15 2:46:57 PM CDT: error: / home/oracle/app/oraInventory specify a location of the inventory with write permissions.

  If the directory/home/oracle/app/oraInventory does not close, can you test to see if you can create it manually using the oraoem OS account. If it already exists, try to create a subdirectory under it to avoid any problem of permission or space.

  Kind regards

  -Loc

• Cannot create the data store: the current licence or ESXi version prohibited the execution of the requested operation.

  using vicfg-nas I am unable to create/remove a datastore nfs on my lab running esxi 6 at home. Is this not supported? Listing them works well. I can create/delete data warehouses nfs using the client to vcenter very well, but it's a little embarrassing.

  I guess that the host is allowed with the free edition of hypervisor! One of the few restrictions of the free version of hypervisor is access to the API. In order to have "write access" (i.e. change things rather than the list of them) you must run the host in evaluation mode, or license (Essentials or better).

  André