Create several folders with several folders in the rapids

Similar Questions

• I'm using wondows mail in windows vista, I created some folders under the folder spam I deleted by mistake, is option there anyway, I can recover those email folders?

  I'm using wondows mail in windows vista, I created some folders under the folder spam I deleted by mistake, is option there anyway, I can recover those email folders?

  Have you checked in the deleted items folder? If they are not there, you will have little luck with this tool.
   
  Recuva
  http://www.Piriform.com/Recuva
  Search for .eml files.

• Cisco ASA cannot create several tunnels at the same address in hand?

  We have several remote sites with Linksys WRVS4400N and Smoothwall firewall/vpn devices.  I need these sites to be able to connect to several tell-contiguous subnets to our main office.  This was done easily with smoothwall and linksys.  You create a separate tunnel for each subnet, and voila, you're done.  However, when I tried this with our ASA newly installed, it won't let me create several tunnels at the same address of the remote peer.  It is a problem because these sites have only a single IP address public static.  Did I miss something or ASA not allow connections to and from multiple subnets form a site with a unique address peer?

  Resembles the limitation on the WRVS4400N as Cisco ASA supports several subnets by tunnel.

  Is there anyway that you can configure a subnet more instead of specific subnets on the ACL?

  For example:

  If you 192.168.0.0/24 and 192.168.1.0/24, instead of having 2 subnets configured, you can combine them into 1 subnet 192.168.0.0/23

• Hello! so I create a character with long hair, but the thing is it attached on the face and body, cannot move/dangle by itself. and the eyebrows can not move

  Hello! so I create a character with long hair, but the thing is it attached on the face and body, cannot move/dangle by itself. and the eyebrows can not move

  For groups or layers Warp independently of their parent group, add a "+" to the beginning of the name of the layer in PS / HAVE. It's the same select group in the Panel of puppets and by checking the Warp option independently in the properties panel.

  Once a group is warping independently, it will be attached to its origin at the origin of the group from its parent by default. You can join a different handful in the parent using the fix to the popup in the properties panel. In Preview 3, if you want to move the origin, you need to do in PS / HAVE. In future releases, you will be able to change the origin directly in the Panel of the puppet.

  If this doesn't solve your problem, you can post a screenshot of the hierarchy of layer here, to see if there is another structural problem.

• Suddenly unable to create new folders using the Windows 7 Explorer.

  I've been running Windows 7 32 - bit (upgrade from Vista) for over a year without any problems.  All of a sudden, I can't create a folder on one of my readers directories structures using the Explorer methods. Context menu only displays "Briefcase". Menu of files shows only "shortcut". Create a folder button does nothing.  Yet, I can always create directory via mkdir on cmd.exe (thank God for command lines ).  I did 2 system restore goes further every time (the second time in 10 days), but can not get the Explorer's ability to create a new subdirectory.  I scanned the heck out of the machine with half a dozen scanners for virus/malware/rootkit (Microsoft Security Essentials is my antivirus and I use Microsoft Firewall).  I went on a comprehensive register and can not find any key that would block the creation of records.  Any advice?

  How to remove and restore the default context Menu items 'New' in Windows 7 and Windows 8
  http://www.SevenForums.com/tutorials/28677-new-context-menu-remove-restore-default-menu-items.html
   
  
  If still no joy, see the 'response' by Linda Yan in this thread.
  http://social.technet.Microsoft.com/forums/en-us/w7itprogeneral/thread/97de8a2a-12f2-4381-A409-a78f4ae551cf
   
  
   

• Is there a way to create a topic with a shading behind the text and fine lines above and below?

  I work with InDesign CS6, Windows 7.

  Is it possible, using nets of paragraph, to create a heading with shading behind the text and fine lines above and below the text?

  I would like to create headers that resemble these:

  

  Thank you!

  A way to create a style of stoke (Stripe type) with a small percentage of height up and downstairs dedicated to scratches, then apply the color out in the dialog whn would you apply the contour to your net of paragraph style. The downside to this is that the 'weight' of the two lines can vary when you change the weight of the actual race.

  To avoid this and still be able to ge the fill to expand the width of column, you can use a 1-cell table, or you could use rules above and below and underscore cutom for filling and key line with a tabulation of withdrawal right. If you need space on the left, as shown in the illustration, you would probably need a tab on the left as well, instead of a dash.

• How to create a table with no lines to the left or to the right?

  If I create a table with say 5 columns and 15 lines, how not to do a vertical line (border) to the left and to the right of the table while keeping the boundary up and down? Is that possible or I just put a white box on the left and the right?

  IDCS3

  There are a few methods that work. Here is one.

  (1) select your table cells

  (2) open the race Panel

  3) click the blue lines of the proxy image in the Panel of stoke to deselect the lines inside and high and low lines

  (4) 0 the value of the weight of the race (or change the color of the None swatch)

  

  Oh and for the love of your fellow designers or the person that allows you to edit your work in the future... do NOT use a white box to hide the traits of lines and columns in the table.

  HTH

  -mt

• Emails from storage for the POP3 account folders 2012 WLM to Outlook 2013 POP3 only creates empty folders in the wrong email account

  NOTE: We have already been asked to come on this forum by Office 365/Outlook 2013 support, so don't tell people not that go back us!

  1. we are under W7 64-bit SP1, run WLM 2012 32-bit and 32-bit Outlook 2013 both installed on this system.

  2. we have a POP3 account set as DEFAULT account in WLM 2012 with old messages in different folders to storage.

  3. we have a POP3 account, which is defined as the DEFAULT account in Outlook 2013.  (But we also have an outlook.com account.)

  4. we try to migrate messages in the WLM 2012 storage folder named 'A book' in Outlook 2013.

  5. we followed the instructions in various other forums support and information pages of Microsoft as follows...

  6. with WLM 2012 and 2013 Outlook both running in WLM 2012 we:

  a. Select "File" (really just a down-arrow in the upper left corner)

  b. select «Export emails»

  c. then select "E-mail."

  d. Select "Microsoft Exchange", and then say 'OK' in the popup window that says that this move Outlook email, etc.

  e. then we click on option button "selected files".

  f. then we click on 'A book', which is a subfolder or storage of our WLM 2012 POP3 account folders.

  g so we say 'OK' and 'Finish '.

  7. for our tests, there are only 3 message in 'A record '.  After we get the message that the export was finished, there is no error message, so he seems to think that everything worked OK.

  8. However, the net result is that a folder named "Folder A" has been created in our outlook.com account (incorrect account; the account POP3 and NOT the default account) AND the folder is empty, containing no message at all.

  We also tried a different folder in WLM 2012 which has been directly added to the POP3 account, instead of lying in "Storage folders" of WLM, but the result was the same.

  There are thousands of e-mails concerned here.  We NEED to somehow get this export/import of working for us before we can migrate Office 365 WLM 2012 / 2013 Outlook.

  Remove the outlook.com e-mail account, and then confirm that MS Outlook works correctly with his pop e-mail account.

  Then in WLM run the export again process.

  Exported messages should appear in the MS Outlook Inbox

• I can't create new folders in the libraries.

  When I click on the button new file that does nothing, does anyone know where I can begin to understand this? No matter if I am in my library of documents or photos, I can't create a new folder for my articles.

  Thank you!

  Do, or you have installed Chrome? It appears that an update of Chrome, (mid April 2013), is responsible for the loss of the option new folder. Even if Chrome has not been installed, here are two corrections.
   
   
   
  How to remove and restore the default context Menu items 'New' in Windows 7 and Windows 8
  http://www.SevenForums.com/tutorials/28677-new-context-menu-remove-restore-default-menu-items.html
   
   
   
  If for any reason, the zip file doesn't work for you, check out the 'response' by Linda Yan in this thread.
  http://social.technet.Microsoft.com/forums/en-us/w7itprogeneral/thread/97de8a2a-12f2-4381-A409-a78f4ae551cf/#99395761-56de-4a76-8C2A-eab498ad735a
   
   
  
  Tip: When you save the text in Notepad, the default file format is .txt. Replace all files.
   
   

• Since I downloaded El Capitan I think I can't paste it into my external hard drive.  I use to download my card reader, copy it, and then download to a new folder on the external drive.  It will not work now and nor can I create new folders on the hard dr

  I used to download pictures from a card reader, copy them, and then stick it on my external hard drive.  Since El Capitan of download, it does not work - I can download and copy, but can not stick to the external hard drive.  I can't set up the files on the external hard drive either.  However, I can download what is already on the external hard drive without any problem.

  How the external drive is formatted?

• Create a page with an estimate of the costs with DWCS6

  Hi all

  I need to help, once again. I create a page where the user can choose from many options and ultimately it gets the estimated costs, for example:

  Home: * drop-down list where the user can choose the kind of house they love, with different prices *-> Let's say the user chooses 'Flat', and the apartment is $ 200

  Car: * drop-down list with different kinds of car-> and here, the user chooses 'Ferrari' with a 'related' $ 2,000 value

  -----------

  Estimated total: $2200

  In a table, assuming that it is on a page, it could be:

  Category	Selection	$
  House	Dish	200
  Car	Ferrari	2000
  Total estimated		2200

  So, what I need, it's a page where the user chooses goods or services from drop-down lists and at the end of the page you have a total estimated. In these lists, you see the name of the goods/service and next to it 'appears' value (inside a text box or something) once you make a selection.
  How does it work? I checked around but probably I used the wrong keywords... because I couldn't find anything! ;(

  Thanks in advance!

  What you understand about the JS Fiddle I gave you?

  • HTML form,
  • CSS for shape, style
  • function jQuery to calculate the values of the form input.  jQuery code goes inside

    Nancy O.

• create a box with a border on the drawings of 'Air France plane'

  Hello a need to create the same form this AF draw:

  

  

  with a white border and a beautiful shadown in and below?

  Thank you!!

  Hi Elolozone,

  In my humble opinion, I think that the best thing to do would be to replicate the stroke that you used to create the 3D plane, give it a fill, then adjust the points to create the inner contour yellow. Then, you can assign to multiply in the transparency Panel it takes on the shade of your 3D object.

  

  You can optionally use the 'Card Art' option in the 3D effect dialog box, but this actually ends up taking more time in my experience. What you could do if you want to test, it is create a yellow rectangle, open the symbols Panel and drag it. Then in the veneer dialog box, you must select the rectangle in the drop-down menu on the left and the area of the 3D object to which you want to apply on the right. It may be worth trying, but I'd go with the first technique myself.

  

• Create a table with a thinner than the source table granulaty

  Hello
  I had a problem. I have a source table that has vacation date / period for employees inside. I want to create a table where I "split" the period of vacation days for each employee.
  Example:
  Holiday table:
  Name - Holiday beginning - end of holiday
  Mr.X - 1.1.2011 - 5.1.2011
  Mr.Y - 2.5.2011 - 3.5.2011
  
  -> new table:
  Name - Day of vacation
  Mr.X - 1.1.2011
  Mr.X - 2.1.2011
  Mr.X - 3.1.2011
  Mr.X - 4.1.2011
  Mr.X - 5.1. 2011
  
  and so on
  Is there an operator or something else with which I could create the new table? I use OWB 11 GR 2
  
  THX

  Hello
  Join your source table to another table that contains all the dates (for example, you can use time dimension in OWB):

  Select vt.name, d.date_value in the vacation_table, vt, dates_tab d vacation_day
  where d.date_value between vt.vacation_start and vt.vacation_end

  Kind regards
  Oleg

• How to create a component with SMD pads on the upper and lower layer

  I am trying to create a piece that is a printed antenna. This will contain a table of these so I'll try to create it in the context that I can place. The active element of the antenna is on the top layer and the portion of land is on the bottom layer. So I need a PIN SMD on top for the active element, and I need a SMD rod on the bottom to connect the Party on the ground. But I can't seem to be able to place a SMD pad on the bottom layer. How can I do this?

  You can change the layer for the SMD pin in the Publisher of the imprint. Right-click the PIN you want to change, and then select the Orientation > layer Swap. He is now on the bottom.

• Create a motion with less built on the timeline Tween

  Hello

  By default when I create a new motion tween, it automatically includes all the images on the layer.  I want only a 72-frame interpolation, not an interpolation of 350-framework.

  Any idea?

  Ronald

  I guess you are using Flash CS4 or CS5 and making the motion tweens 'new '.  If you want to remove additional motion tween frameworks (framework 73-350), you have two options.

  (1) hold the SHIFT key, at the end of the Tween (in frame 350), place your mouse and drag the end of the Tween to frame of 72.  This will make the end of the tween frame of 72.  However, this also means that your object will disappear after frame 72.

  (2) in the case, you want your object to exist all 350 frames, but have only a 1-72 tween, you must divide the timeline.  Right-click (ctrl + click on Mac) on frame of 73.  Choose "split the motion."  This will divide the sequence into two sections.  Right-click on the second section and choose "Delete Tween".  They are now back to normal frames.